Out of Range devices shown as connected

I use my MacBook Air in clam-shell mode at home and in the office with the following devices, Apple Wireless Keyboard, Apple Magic Mouse, and Apple LED Cinema Display. Very often my mouse either at home or in the office will fail to connect even after the system has been awaken from sleep mode by the keyboard.
I notice that the out-of-range keyboard and mouse are still listed as connected in the Bluetooth preference panel. Could that be the source of the problem?
Any help or suggestions on why to diagnosis the issue would be appreciated. I've look thru the system logs, but couldn't find anything helpful.

why don't you change that background to what you want in desktop system preferences when the second monitor is connected? different monitors have different desktop backgrounds and they remember the settings from the last time they were connected.

Similar Messages

5 out of 6 devices can't connect to Internet

Just to preface, this was all working hours ago.
airport express, Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
my Samsung Galaxy s3 has no problems however.
normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
Any ideas would be greatly appreciated.

You want the device that is directly connected to the modem to furnish the PPPoE service.
This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Your settings should look like this:
Connect Using = PPPoE
Account Name = Your user name with your ISP
Password = Your password with the ISP
Verify Password
Service Name.....leave this area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings and the TC will restart
Either delete the PPPoE connection on your Mac, or if you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
Wait a moment or two, then start the modem and let it urn for a moment by itself
Start the TC and wait for a green light
Then start each device one at a time until the network is back up

Airport Out of Range WinXP

Hello everybody, my problem is the next: I have a Airport Extreme Base Station (AEBS) linked to a netgear DM111 by ethernet cable, so the whole ISP is configured on the netgear and that info passes through the cable to the AEBS making it just a wireless access point, on my 15" and 17" MacBook Pros there is no problem i got internet, printing and disk sharing (all crystal clear) but with my Windows XP machine there's a whole, when i search on the wifi signals i can see my AEBS but when i try to connect to it there is a message that says "the internet base station you want to join is out of range" so i cannot connect to it, please someone could tell me what the cause of the problem could be? should be the channel where my airport is transmitting?
Thanks
imacpanther
Message was edited by: imacnet

HI
I don't know if your are using your Air Port Extreme as your main router or not, but in my case I had the same issue and I had to set my Airport Extreme Base Station as a bridge just to use it for wireless since I have 3 win xp laptops since I have a FIOS router
You might want to check the xp pc to see where it’s getting it’s IP address since it might be on the netgear ip address if that is not your main router.
I also had to get the Air Port Express since my laptops could not connect to the Air Port Extreme, just like your issue it could see it but not connect to it
in my case, the problem was that my Airport Extreme, after being fully reset, was on a different subnet than the PC I was attempting to admin from. In my case, all my home computers are in 192.168.0.*, and the Airport's factory default is 169.254.22.something.
My solution is as follows:
First hook up a cable(Network Cable) from the laptop/PC to the express
1) Open Network Connections->Local Area Connection->Properties->Internet Protocol (TCP/IP) Properties
2) Write down the current settings from the Express card
3) Change the IP Address to 169.254.22.5 (doesnt matter as long as the first 3 numbers match the Airport, and the fourth is different). I left my subnet mask at 255.255.255.0 and the gateway at 192.168.0.1.
4) Hit "OK" on two windows, the internet connection should be temporarily down but the Airport Admin should now be able to connect.
5) While changing your settings, make sure the Airport will have an accessible IP address, either through DHCP or manually setting it to be on your subnet.
6) make the changes and update the Express changes, it should connect at which time remove the cable
7) Return to the TCP/IP Properties on the PC and restore the original settings
Hope this helps

Mega 180 VGA Video Out Of Range

Hello all.
I recently received a Mega 180 (used, but not too used). It had an ATI AGP card in it that I pulled out. I then installed Win XP Pro (SP2 and other up to date MS stuff).
It was working fine for a few days ... I have a KVM switch and plugs attached to it, with the VGA cable into the primary VGA slot. Now I can't get any video output. My LCDs (attached to the KVM, and directly to the Mega180) say that "video out of range". I've connected a CRT to it but it's not getting a video signal after the MS XP Pro initial screen.
I've gone into the BIOS and reset it to the "optimal defaults" but no luck there either.
Any help/suggestions would be appreciated.
ESlater

Bass: Are you sure it's the F6 key that allows one to reset to VGA mode? I've gone into CMOS and turned off Quick Boot, but still, everytime I press F6 I just get the Windows options for Safe Mode boot.
I did go into Safe Mode and set my resolution to 800x600 but that still didn't help.
I guess I can always go ahead and re-install the ATI AGP but I was thinking this unit should work with the standard VGA plug. What is weird is that Windows was running fine, and I wasn't really using the machine at all when the video mode got "reset" (or something).
I guess I'll boot into Safe Mode and remove all video drivers and see how that goes?
Otro: I thought that by hooking up the CRT I'd be able to capture all video modes (certainly more than w/the LCD). What's happening is that the CRT is turning "off" once Windows moves beyond the initial screen (presumably to the User Account Login Screen), as if the Mega 180 isn't even sending a signal down the VGA connection.

4 out of 5 devices connect to Time capsule. Last one to try to connect fails to connect, no matter which device it is.

Prior to problem: All 5 devices (iMac, Mac Air, iPad and (2) iPhone 4) were surfing wirelessly on Airport express.
Replaced AE with Time Capsule.
Problem: Wife's iPhone could not connect to T.C. Other 4 devices connect without problem. Wife's iPhone can surf other wireless networks. After doing a total shut down of all devices and restart of each, starting with 3rd party router, then T.C., then each device one at a time... wife's iPhone can connect, but Mac Air can not. Observed that in each case, the one that can't connect is the last one to be restarted and attempt to connect. Did this a 3rd time. I chose my iPhone to be the last to try to connect . My iPhone can't connect but all other devices are connected. Every case: last to connect can't connect.
Steps taken before realizing it was the "last device to try connecting" (back when I thought it was simply my wife's iPhone): Wifi Off/On. "Forget Network." Reset Network Settings. Power iPhone Off/On. Power T.C. Off/On. Turned T.C. wireless security Off/On. All these were done multiple times.
It appears there is no hardware issue since all are capable of connecting to T.C., just not at the same time. I don't know much about protocols and addresses. Could it be that T.C. is fouling up the assignment of an address or channel or route or whatever to the 5th device that tries to connect? Is the 5th device left without a address, channel or route to the T.C.?
My security is WPA2 Personal. It's on. The password is alphanumeric 9 characters. On my iPhone that can't connect, the satus wheel is spinning continuously beside my network's name. Tapping the blue arrow for more info shows the window that has "Forget this network" at the top, followed by DHCP, BootP and Static. DHCP is selected. The following fields are listed: IP Address, Subnet Mask, Router, DNS, Search Domain and Client ID. Most times, all of these fields are blank. Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
Please help.

Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
That is auto IP and means the device was not able to pick up an IP from the dhcp server.
I am scratching my head.. it is not one I have seen with Mac stuff or on these columns since I started answering questions.. it is seen in mixed environments fairly often that stuff doesn't play nice with each other. But Mac - Apple has shown fairly consistent wireless functionality.
Is the TC brand new? Did you ring Apple and ask if they can sort it?
When you are using 100% apple environment, to me that is their job to figure out.
For what you can do, I would try and flash the TC back to 7.5.2 firmware. I have heard people say the latest TC that is not allowed but have a go.. if you run Lion certainly download and use exclusively 5.6 airport utility.
Is the TC set to router or bridge? Is the TC the only router?
Could you bypass at least the issue for now using the airport express plugged into the TC as an AP??

ActiveWorkbook.Connections(Connection).OLEDBConnection - Subscript out of range error

With ActiveWorkbook.Connections(Connection).OLEDBConnection ' This statement is giving me a script out of range error
' when used inside
the function shown below.
Sub getData(qArray() As String, Connection As String, ActSheet As String)
'Updates the data from the Database. qArray is the SQL query in an array, connection defines which connection to use and ActSheet defines in which sheet to place the data
Sheets(ActSheet).Select
Range("A1").Select
With ActiveWorkbook.Connections(Connection).OLEDBConnection
.CommandText = qArray
.BackgroundQuery = False ' Hvis true opdateres ikke før script er kørt færdig
.CommandType = xlCmdSql
.Connection = "OLEDB;Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RDWEB;Data Source=dk0149sql.niladv.org;"
.RefreshOnFileOpen = False
.SavePassword = False
.SourceConnectionFile = ""
.SourceDataFile = ""
.ServerCredentialsMethod = xlCredentialsMethodIntegrated
.AlwaysUseConnectionFile = False
End With
ActiveWorkbook.Connections(Connection).Refresh
End Sub
I am getting a subscript out of range when I use the above statement inside the getData function shown below.
The data is getting into the qArray as seen the Locals Window after it errors
How do I eliminate this error?

It seems that Connection has some bad value. Have you investigated what that may be?
The code looks puzzling to me - it never seems to be running the query. Then again, this is a forum for SQL Server, and not for programming Excel. And it's probably in a forum of the latter type should have posted your question.
Erland Sommarskog, SQL Server MVP, [email protected]

String index out of range: -1 occuring while deploying a JDBC connection pool

Hi,
I'm getting the below error (Sorry for the enormity.i got it from the log file
.all nested exceptions are included)
when i deploy my connectionpool onto a weblogic 6.1
server with the following entries in the config.xml
<JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver" InitialCapacity="4"
LoginDelaySeconds="1" MaxCapacity="10" Name="CabinBeanPool" Properties="user=sa;password=sa;"
RefreshMinutes="10" SupportsLocalTransaction="true" Targets="myserver" TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="CabinBeanTable" URL="weblogic:jdbc:mssqlserver4:pubs@bsl2002"
/>
The below one i think is the core exception.Rest are nested.
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1525)
     at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
Grateful if u could provide the solution?
####<Feb 7, 2002 3:25:47 PM IST> <Error> <JDBC> <bsl2002> <myserver> <ExecuteThread:
'8' for queue: 'default'> <system> <> <001060> <Cannot startup connection pool
"CabinBeanPool" String index out of range: -1>
####<Feb 7, 2002 3:25:47 PM IST> <Error> <Management> <bsl2002> <myserver> <ExecuteThread:
'8' for queue: 'default'> <system> <> <141001> <Error updating deployments on
target mydomain:Name=myserver,Type=Server, component mydomain:Name=CabinBeanPool,Type=JDBCConnectionPool,
deployments: old values: mydomain:Name=myserver,Type=Server>
weblogic.management.DistributedManagementException: Distributed Management [1
exceptions]
     at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:534)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
     at $Proxy7.addDeployment(Unknown Source)
     at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
     at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
     at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
     at $Proxy19.setTargets(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Distributed update exception
- remote object: mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
- actionName: addDeployment
- params: [Ljava.lang.Object;@5e474b
- signature: [Ljava.lang.String;@1aaeb5
Distributed update exception
- remote object: mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1525)
     at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
     at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:337)
     at weblogic.jdbc.mssqlserver4.ConnectDriver.acceptsURL(ConnectDriver.java:181)
     at java.sql.DriverManager.getDriver(DriverManager.java:238)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:94)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFactory.java:122)
     at weblogic.jdbc.common.internal.ConnectionPool.getResourceFactory(ConnectionPool.java:691)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:610)
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:608)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:592)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:484)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
     at $Proxy7.addDeployment(Unknown Source)
     at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
     at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
     at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
     at $Proxy19.setTargets(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DeploymentException: Error creating connection pool - with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:110)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:608)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:592)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:352)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:484)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:354)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
     at $Proxy7.addDeployment(Unknown Source)
     at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1448)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:858)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:810)
     at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:288)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
     at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
     at $Proxy19.setTargets(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:89)
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:116)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:167)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2456)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DistributedOperationUpdateException: Error creating connection
pool - with nested exception:
[weblogic.management.DeploymentException: Error creating connection pool - with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]]
     at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:494)
     at weblogic.management.internal.Con####<Feb 7, 2002 4:09:22 PM IST> <Notice>

Hi Saju,
There is an error in the URL definition. It should be
jdbc:weblogic:mssqlserver4 instead of weblogic:jdbc:mssqlserver4.
Regards,
Slava Imeshev
"Saju Thomas" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
I'm getting the below error (Sorry for the enormity.i got it from the logfile
all nested exceptions are included)
when i deploy my connectionpool onto a weblogic 6.1
server with the following entries in the config.xml
<JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver"InitialCapacity="4"
LoginDelaySeconds="1" MaxCapacity="10" Name="CabinBeanPool"Properties="user=sa;password=sa;"
RefreshMinutes="10" SupportsLocalTransaction="true" Targets="myserver"TestConnectionsOnRelease="true"
TestConnectionsOnReserve="true" TestTableName="CabinBeanTable"URL="weblogic:jdbc:mssqlserver4:pubs@bsl2002"
/>
The below one i think is the core exception.Rest are nested.
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
atweblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
>
Grateful if u could provide the solution?
####<Feb 7, 2002 3:25:47 PM IST> <Error> <JDBC> <bsl2002> <myserver><ExecuteThread:
'8' for queue: 'default'> <system> <> <001060> <Cannot startup connectionpool
"CabinBeanPool" String index out of range: -1>
####<Feb 7, 2002 3:25:47 PM IST> <Error> <Management> <bsl2002> <myserver><ExecuteThread:
'8' for queue: 'default'> <system> <> <141001> <Error updating deploymentson
target mydomain:Name=myserver,Type=Server, componentmydomain:Name=CabinBeanPool,Type=JDBCConnectionPool,
deployments: old values: mydomain:Name=myserver,Type=Server>
weblogic.management.DistributedManagementException: Distributed Management[1
exceptions]
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:534)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Distributed update exception
- remote object:mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
- actionName: addDeployment
- params: [Ljava.lang.Object;@5e474b
- signature: [Ljava.lang.String;@1aaeb5
Distributed update exception
- remote object:mydomain:Location=myserver,Name=myserver,Type=ServerConfig
- remote server: weblogic.management.internal.RemoteMBeanServerImpl@19b1ca
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
atweblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:63)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:337)
atweblogic.jdbc.mssqlserver4.ConnectDriver.acceptsURL(ConnectDriver.java:181)
at java.sql.DriverManager.getDriver(DriverManager.java:238)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvF
actory.java:94)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFacto
ry.java:122)
atweblogic.jdbc.common.internal.ConnectionPool.getResourceFactory(ConnectionPo
ol.java:691)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:610
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:484)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DeploymentException: Error creating connection pool -with
nested exception:
[java.lang.StringIndexOutOfBoundsException: String index out of range: -1]
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:110)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
atweblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
atweblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:484)
atweblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:354)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
atcom.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy7.addDeployment(Unknown Source)
atweblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBean
Impl.java:1448)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:858)
atweblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.
java:810)
atweblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Configurati
onMBeanImpl.java:288)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:135
6)
atcom.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:133
1)
atweblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:303)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy19.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanA
ttribute.java:89)
atweblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMB
eanAction.java:116)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:167)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.DistributedOperationUpdateException: Error creatingconnection
pool - with nested exception:
[weblogic.management.DeploymentException: Error creating connection pool -
with> nested exception:> [java.lang.StringIndexOutOfBoundsException: String index out ofrange: -1]
atweblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(Confi
gurationMBeanImpl.java:494)
at weblogic.management.internal.Con####<Feb 7, 2002 4:09:22 PM IST><Notice>
>

"Unknown Device" shown when I connect my iPhone 4 to the laptop

Hi all,
My iPhone 4 cannot synchronize to my Windows 7. Only "Unknown Device" shown on the "Device Manager" when I connect them via the cable.
The laptop is new and installed Windows 7 Home Premium Edition 64-bit. BIOS is the latest one.
iOS is 4.0 and iTunes is 10.0.1 for 64-bits Windows 7
I do not think the problem is due to the iTunes. Only "Unknown Device" shown on Window 7. I think the iPhone cannot be recognized by the laptop.I tried to connect the phone to a Window XP. It is fine. Likewise, a usb drive is recognize by the Windows 7 laptop.
I have tried
1. update the BIOs
2. Re-install the itunes
3. download the usbaapl.sys
Can anyone help as it bother me for a week.
Thanks very much
Ben

The first thing I would try is to use a different USB port
next I would have my MacbookAir looked at

PlayBook loses Bluetooth connection when out of range

This is a new problem.
I have eventually resolved the issue of getting 5.0 software on my 9000 phone. Installed the Blackberry Bridge, linked the Bluetooth, and it works fine on the PlayBook. An ideal product for what I want to do.
However, when I move the phone out of range of the tablet Bluetooth disconnects and will only reconnect if I delete all the devices and reinstall. According to the various blogs on the web this is a common problem.
All the other Bluetooth facilities work now and before off the phone, so I am convinced the issue is with the software on the tablet.
Please help me.

NEVER MIND!!! The app I was using was BackCountry. May Need GPS Airtime! This app may need GPS Airtime to function properly on Droids. Please bundle GPS Airtime with the paid version of Backcountry. Had I but know this, I would not have posted on Verizon my question about Airplane mode and GPS functioning, and would have saved time on my recent trip to Colorado back country. As it was, I had to discover the Airplane mode/GPS relationship on my own. PS: App works great on my RAZR MAXX, now that I have GPS Airtime and doesn't work for sour apples without it.
HOWEVER, Verizon, what are you going to do to fix this? I'd still like to know that.

Personal Hotspot disappears from Kenwood DNN991HD. Connects once then if Kenwood turned off then back on later iPhone shows as out of range until hotspot is switched off then on. Have reset net settings. Kenwood connects automatically to other saved

If I start my car in the morning the Kenwood unit will connect to my iPhone and the network functions all work. If I shut the car off for a while and restart the network list on the Kenwood shows the iPhone as out of range. I have to cycle the personal hotspot on and off...sometimes a few times before it shows up again available in the network list. It works fine when connecting, disconnecting, reconnecting automatically to my home WiFi Network.
My iPhone is also connected to the Kenwood with Bluetooth...would this make a difference?
I have tried resetting network settings but the problem remains.
Anyone with ideas how I can fix this

Hello bobbenedetti,
At this point. due to the nature of your issue, you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
Regards,
Jeff D.

HT1689 How can I find out what 5 devices are connected to my itunes account

How can I find out what 5 devices are connected to my iTunes account?

There is no list available from your end.
(78933)

When I'm out of range for Wi-Fi on iPad, can I use the Internet connection from my iPhone 5?

I only get Internet on my iPad when I have my wireless router. When I'm out if range can I piggyback with my iPhone5? If so, how.

Yes, you can use the hot spot feature of the iPhone 5 to create a WiF Access Point.
See here in Chapter 33 Settings http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Mac mini 2014 mDP out of range

Hi,
I have a strange issue with Mac mini late 2014 and NEC PA272W monitor. Mac mini and the monitor are connected by high quality mini display port cable.
Sometimes on boot the display is reporting: Out of range message H 14,6KHz. Its a sync problem?
Then I have to turn off and on the monitor to restore image.
Any advice to this?

Sadly, this "out of range" problem has re-appeared today :-/
This is log from the console:
08.02.2015 13:36:44,486 WindowServer[121] Received display connect changed for display 0x28da5200
08.02.2015 13:36:44,486 WindowServer[121] Found 1 modes for display 0x28da5200 [1, 0]
08.02.2015 13:36:44,486 WindowServer[121] Display 0x28da5200 changed state to offline
08.02.2015 13:36:44,490 WindowServer[121] No display devices are on-line. Switching to virtual display mode
08.02.2015 13:36:44,493 WindowServer[121] Received display connect changed for display 0x3f003d
08.02.2015 13:36:44,493 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display added
08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,521 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
08.02.2015 13:36:46,507 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:46,518 DMProxy[373] CGSCopyDisplayInfoDictionary: error requesting display info dictionary (0x3e8)
08.02.2015 13:36:46,523 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
08.02.2015 13:36:46,526 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:46,539 DMProxy[373] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:46,543 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
08.02.2015 13:36:46,547 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:46,550 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:46,554 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
08.02.2015 13:36:46,555 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:47,000 kernel[0] EDID CEA Extensions not valid for audio [Revision ID]: 1 (minimum value: 3)
08.02.2015 13:36:48,212 WindowServer[121] Received display connect changed for display 0x3f003c
08.02.2015 13:36:48,213 WindowServer[121] Found 43 modes for display 0x003f003c [43, 0]
08.02.2015 13:36:48,213 WindowServer[121] Display 0x003f003c changed state to online
08.02.2015 13:36:48,239 WindowServer[121] New display device coming on-line. Switching from virtual display mode
08.02.2015 13:36:48,240 WindowServer[121] Received display connect changed for display 0x3f003d
08.02.2015 13:36:48,240 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,252 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,262 WindowServer[121] Display 0x28da5200: Unit 0: Startup Mode 2560 x 1440, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80001000, ioModeDepth 0x0, IOReturn 0x0
08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display added
08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
08.02.2015 13:36:48,263 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:48,263 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,263 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,264 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,264 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,273 WindowServer[121] MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x28da5200 device: 0x7fa849516e60 isBackBuffered: 1 numComp: 3 numDisp: 3
08.02.2015 13:36:50,241 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:50,263 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:50,267 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,270 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,301 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,304 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,312 DMProxy[374] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:50,319 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:50,334 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:50,334 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,340 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,346 DMProxy[375] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:50,350 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,355 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:50,359 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:50,365 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:51,808 Console[376] Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable

Repost: Oracle VM Manager (IndexError: list index out of range) error

The Oracle VM Manager software will not import a server side created VM for management purposes. It is giving an index-out-of-range error when trying to retrieve the Memory Size from the jumpbox.xen file (I created a symbolic link to this file called vm.cfg).
Here is the log for the index-out-of-range error:
ovs_root.log
"2008-08-20 02:03:26" INFO=> utl_list_dir: directory('/OVS/running_pool') => pro
jectweb/,infinesse-web/
"2008-08-20 02:03:26" INFO=> list_dir: directory('/OVS/running_pool') => project
web/,infinesse-web/
"2008-08-20 02:03:26" INFO=> utl_get_vm_size: vm('/OVS/running_pool/infinesse-we
b') => 12020
"2008-08-20 02:03:26" INFO=> get_vm_size:vm('/OVS/running_pool/infinesse-web') =
success:size=12020"2008-08-20 02:03:26" ERROR=> xen_get_memory:vm('/OVS/running_pool/infinesse-web
')=><IndexError: list index out of range>
"2008-08-20 02:03:26" INFO=> get_vm_memory: vm('/OVS/running_pool/infinesse-web'
) scope=cfg rs=failed:<IndexError: list index out of range>
and my vm.cfg file:
# -- mode: python; --
# This JumpBox requires Hardware Support otherwise known as Xen's HVM mode.
# To test your Xen installation if it supports this mode, issue the following
# command:
# sudo xm info | grep xen_caps
# it should return a capabilities line like:
# xen_caps : xen-3.0-x86_32 hvm-3.0-x86_32
# as long as there is an hvm entry as shown above it should work.
## If starting Xen fails you may need to set a custom path
## for your kernel or device model files. Uncommant the following
## variables and put in the appropriate paths
## Uncomment and set your custom hvm loader path here
# hvm_path = ""
## Uncomment and set your custom device model loader path here
# devmodel_path = ""
# You will probably want to uncomment the following VNC variables so you
# can see the JumpBox console over VNC. Make sure to set the vncpassword to
# something unique. Also, if you run multiple JumpBoxes on the same host, you
# may want to leave vncdisplay unset and use the domid for the display numbers
#vnc=1 # enable VNC library for graphics, default = 1
#vnclisten="0.0.0.0" # address that should be listened on for the VNC server if vnc is set.
#vncdisplay=1 # set VNC display number, default = domid
#vncconsole=1 # enable spawning vncviewer for domain's console
#vncpasswd='password' # set password for domain's VNC console
memory = '256'
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
########### You shouldn't have to edit anything below here ##############
import os
import sys
# Assemble the basepath
file = os.getcwd() + '/' + sys.argv[2]
basepath = os.path.dirname(os.path.abspath(file))
datatarball = basepath + '/disks/data/data.xen.tgz'
builder = "hvm"
hvmfiles = [
'/usr/lib/xen/boot/hvmloader',
'/usr/lib/xen-ioemu-3.0/boot/hvmloader'
devfiles = [
'/usr/lib/xen/bin/qemu-dm',
'/usr/lib/xen-ioemu-3.0/bin/qemu-dm'
# Check to see if the user has assigned custom HVM or device_model paths
try:
hvmfiles.insert(hvm_path,0)
except NameError:
pass
try:
devfiles.insert(devmodel_path,0)
except NameError:
pass
# Choose the appropriate HVM Loader
for i in hvmfiles:
if os.path.exists(i):
kernel = i
break
# Choose the appropriate Device Models
for i in devfiles:
if os.path.exists(i):
device_model = i
break
# Need to test if device_model and kernel are set, if not return with error.
# If this is the first time this has run, extract the data disk tarball
# then remove the tarball
if os.path.exists(datatarball):
os.chdir(basepath + '/disks/data')
os.system("tar -zxpf " + datatarball)
os.remove(datatarball)
# Continue normal configuration
name = "joomla15"
vif = ['type=ioemu, mac=00:16:3E:2B:1F:04, bridge=xenbr0']
disk = ['file:' + basepath + '/disks/root/root.hdd,hda,w','file:' + basepath + '/disks/data/data.xen,hdb,w']
root = "/dev/hda1 ro"
extra = "4"

Hi Ravi,
the error is due to the componet JAVA(TM) 7 which is not supported.
Better to run JAVA 6, I'm running the update 33, you can download it from http://www.oracle.com/technetwork/java/javase/downloads/jre6-downloads-1637595.html
Remeber to remove JAVA &
Go to control panel --> add remove programs and remove JAVA (TM) 7.
It will solve the problem.
Ciao,
Massimo

"another device is using the same ip address.." - iOS devices won't connect to AEBS wifi.

I've got a Motorola modem/gateway - 3360 from WalMart. I have the AEBS working in bridge mode connecting my iMac & Printer fine, but my iOS devices won't connect.
While troubleshooting & trying all types of settings, I was able to get EITHER the iMac or the iOS devices connected to internet, but not both at same time.
Then I noticed I am getting "another device is using the same ip address.." message.
I have changed the AEBS ip address & had been able to get either the iMac or iOS devices working depending on which ip address I use.
BUT now, all my iOS devices dont connect to the internet regardless of the ip address of the AEBS.
All my iOS devices see the network, and accept the network password, but they do not connect to internet, circle just keeps spinning...
Any assistance is GREATLY appreciated.
Thanks for any assistance,
Dave

It looks like may have to go back to square one and delete my network & set it up from scratch if I don't figure it out.
If you do go this route, I would like to make a suggestion for your consideration, and that is to assign static IP addresses to devices that are "permanent" on your network or ones you want to make sure can be reachable at all times. These (again) would be servers, routers, wireless access points, network printers/scanners, NAS devices, etc.
I would recommend the following IP addressing scheme as a baseline and you are certainly free to deviate in any way you see fit to meet your networking requirements:
Reduce the number of IP handed out by DHCP. By default, most routers will provide 100-200 private IP addresses within their DHCP leasing scope. The AirPort, by default, assigns 10.0.1.2 thru 10.0.1.200 via DHCP. Your Motorola may assign 192.168.0.2 thru 192.168.0.150. Either way, I would reduce this to no more than fifty (50) total which should provide you with plenty of addresses even if you are hosting gaming convention at your home.
I use the following IP address scheme for the "permanent" network clients:
Network Printers: 10.0.1.200 - 209
NAS Devices: 10.0.1.210 - 219
Wireless Access Points or routers reconfigured as bridges: 10.0.1.220 - 229
Servers: 10.0.1.230 - 239
With the "permanent" devices pre-assigned with static Private IP address that are outside of the DHCP range, you shouldn't ever get an IP address conflict again.

Out of Range devices shown as connected

Similar Messages

Maybe you are looking for