Out of range output video size ?
Hello,
I would like to use a camera which has a large output size, more than 1920x1080.
When I select the camera, I've a message :
Out of range output video size
One or more output video width and height are out of range. Please provide video size in range 80x60 to 1920x1080.
Is it a limitation of FMLE or FMS ? (I think it's FMLE because the message appears even if the "save to file" is the only publishing format selected)
Is there a way to edit a confugration file to remove this limit ?
Best regards,
why don't you change that background to what you want in desktop system preferences when the second monitor is connected? different monitors have different desktop backgrounds and they remember the settings from the last time they were connected.
Similar Messages
-
"The dimensions of this page are out of range"
Hi,
I'm having some trouble opening some pretty big posters I was creating. They contain some non-vector image files, so I decided to design them at the full size, rather then scale up in the end. Although a bit slow with size lag it was not an issue. In fact I have saved and re-opened them a few times with no trouble.
Now however, I made an edit to a single background psd file in photoshop (it's now smaller in size) that runs consistent through all 10 of the posters. I went in to update/edit each file again, and saved them no problem. Upon attempt to reopen I am sporadically getting the error "The dimensions of this page are out of range." Some files have this, others don't. One didn't have it, then a close and reopen brought it on.
I did a few searches here and elswhere and everyone seems to recieving this error when TRYING to save. Not after saving has already happened.
Does anyone have any suggestions to getting these files working again?I'm currently trying to save an Illustrator CS4 document with two artboards to PDF (artboard #1 is 176.81in x 123.41in, artboard #2 is 206.0in x 66.08in), after finishing the Progress dialog "Saving...", an error dialog appears exclaiming "The dimensions of this page are out-of-range". These sizes are already the least I can have, what am I to do for it to properly export to PDF? (It has problems exporting to JPEG as well, but let's try to figure out one problem at a time.)
Any help will be greatly appreciated. Time is of the essence. -
Mega 180 VGA Video Out Of Range
Hello all.
I recently received a Mega 180 (used, but not too used). It had an ATI AGP card in it that I pulled out. I then installed Win XP Pro (SP2 and other up to date MS stuff).
It was working fine for a few days ... I have a KVM switch and plugs attached to it, with the VGA cable into the primary VGA slot. Now I can't get any video output. My LCDs (attached to the KVM, and directly to the Mega180) say that "video out of range". I've connected a CRT to it but it's not getting a video signal after the MS XP Pro initial screen.
I've gone into the BIOS and reset it to the "optimal defaults" but no luck there either.
Any help/suggestions would be appreciated.
ESlaterBass: Are you sure it's the F6 key that allows one to reset to VGA mode? I've gone into CMOS and turned off Quick Boot, but still, everytime I press F6 I just get the Windows options for Safe Mode boot.
I did go into Safe Mode and set my resolution to 800x600 but that still didn't help.
I guess I can always go ahead and re-install the ATI AGP but I was thinking this unit should work with the standard VGA plug. What is weird is that Windows was running fine, and I wasn't really using the machine at all when the video mode got "reset" (or something).
I guess I'll boot into Safe Mode and remove all video drivers and see how that goes?
Otro: I thought that by hooking up the CRT I'd be able to capture all video modes (certainly more than w/the LCD). What's happening is that the CRT is turning "off" once Windows moves beyond the initial screen (presumably to the User Account Login Screen), as if the Mega 180 isn't even sending a signal down the VGA connection. -
Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6
Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave -
Error "number out of range" in pdf sent through mail using smartform output
Hi Experts,
We have a program which sends mail using smartform output in 'PDF' format. We are able to preview smartform correctely in SAP and mail is also getting sent fine with attachment of form as PDF document. But, when we try to open the document, it gives error saying 'Number out of range'. Also, not all of the windows of smartform are appearing in document and some are coming only half.
We are not able to find out the reason for this. Any help would be appriciated.
Gouri.Hello,
How did you solve this one? We are facing the same problem in ECC6.0.
Thanks in advance,
Benjamin de Rijke -
The dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm
the dimension of my illustrator CC is out of range, i cant make the size bigger than 577.95cm, please help
hi
No i have been using illustrator CC version for six months, I can adjust
the size to 1000cm above before. Its all of a sudden like this so there
must be something i can do. I have been using illustrator with different
version for more than five years , have been setting it for larger file for
laser cutting , it was totally fine. -
Xen Kernel randomly fails to load and goes out of range
Been having an on/off issue lately that requires a hard reset of my system. Essentially what happens is the system begins to load when my monitor reports an error that the signal is out of range. I try to pretend login and reboot, but it does not work. Instead, I am forced to simply reset the system and once reset it appears to boot OK without any issues. In fact I can go a few reboots before once again it decides to break. Below is what should be one of the logs from a failed boot, in fact, the system is in this same failed state right now as well.
arch_1 ~ :( # journalctl -b -1
-- Logs begin at Sat 2013-12-28 00:39:50 EST, end at Thu 2014-01-02 23:28:03 EST. --
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 332.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 336.0K (max 91.3M, leaving 137.0M of fre
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuset
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpu
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuacct
Jan 02 23:22:36 arch_1 kernel: Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SM
Jan 02 23:22:36 arch_1 kernel: Command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console=tty0
Jan 02 23:22:36 arch_1 kernel: Freeing 9e-100 pfn range: 98 pages freed
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on 9e->100
Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on bd9ff->100000
Jan 02 23:22:36 arch_1 kernel: Released 98 pages of unused memory
Jan 02 23:22:36 arch_1 kernel: Set 271971 page(s) to 1-1 mapping
Jan 02 23:22:36 arch_1 kernel: Populating 80000-80062 pfn range: 98 pages added
Jan 02 23:22:36 arch_1 kernel: e820: BIOS-provided physical RAM map:
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000100000-0x00000000bd9fefff] usable
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000100000000-0x0000000237ffffff] usable
Jan 02 23:22:36 arch_1 kernel: NX (Execute Disable) protection: active
Jan 02 23:22:36 arch_1 kernel: SMBIOS 2.5 present.
Jan 02 23:22:36 arch_1 kernel: DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A10 12/20/2010
Jan 02 23:22:36 arch_1 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan 02 23:22:36 arch_1 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jan 02 23:22:36 arch_1 kernel: No AGP bridge found
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
Jan 02 23:22:36 arch_1 kernel: Scanning 1 areas for low memory corruption
Jan 02 23:22:36 arch_1 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00000000-0x000fffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7fe00000-0x7fffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b47000, 0x01b47fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b48000, 0x01b48fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x7c000000-0x7fdfffff] page 4k
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b49000, 0x01b49fff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4a000, 0x01b4afff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4b000, 0x01b4bfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4c000, 0x01b4cfff] PGTABLE
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x00100000-0x7bffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x80000000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x80000000-0xbd9fefff] page 4k
Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: [mem 0x100000000-0x237ffffff] page 4k
Jan 02 23:22:36 arch_1 kernel: RAMDISK: [mem 0x01f54000-0x029fefff]
Jan 02 23:22:36 arch_1 kernel: ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
Jan 02 23:22:36 arch_1 kernel: ACPI: XSDT 00000000000fc7d7 00084 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACP 00000000000fc907 000F4 (v03 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DSDT 00000000ffe9e423 05744 (v01 DELL dt_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: FACS 00000000bd9ffc00 00040
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000ffea3d30 00087 (v01 DELL st_ex 00001000 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: APIC 00000000000fc9fb 00092 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: BOOT 00000000000fca8d 00028 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: ASF! 00000000000fcab5 00096 (v32 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: MCFG 00000000000fcb4b 0003C (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET 00000000000fcb87 00038 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: TCPA 00000000000fcde3 00032 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: DMAR 00000000000fce15 00108 (v01 DELL B10K 00000015 ASL 00000061)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bd9ffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: NUMA turned off
Jan 02 23:22:36 arch_1 kernel: Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
Jan 02 23:22:36 arch_1 kernel: Initmem setup node 0 [mem 0x00000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: NODE_DATA [mem 0x7f0c7000-0x7f0cbfff]
Jan 02 23:22:36 arch_1 kernel: Zone ranges:
Jan 02 23:22:36 arch_1 kernel: DMA [mem 0x00001000-0x00ffffff]
Jan 02 23:22:36 arch_1 kernel: DMA32 [mem 0x01000000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: Normal [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: Movable zone start for each node
Jan 02 23:22:36 arch_1 kernel: Early memory node ranges
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00001000-0x0009dfff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00100000-0xbd9fefff]
Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x100000000-0x237ffffff]
Jan 02 23:22:36 arch_1 kernel: On node 0 totalpages: 2054556
Jan 02 23:22:36 arch_1 kernel: DMA zone: 64 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA zone: 21 pages reserved
Jan 02 23:22:36 arch_1 kernel: DMA zone: 3997 pages, LIFO batch:0
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 12072 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 772607 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: Normal zone: 19968 pages used for memmap
Jan 02 23:22:36 arch_1 kernel: Normal zone: 1277952 pages, LIFO batch:31
Jan 02 23:22:36 arch_1 kernel: ACPI: PM-Timer IO Port: 0x808
Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Jan 02 23:22:36 arch_1 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan 02 23:22:36 arch_1 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ0 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ2 used by override.
Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ9 used by override.
Jan 02 23:22:36 arch_1 kernel: Using ACPI (MADT) for SMP configuration information
Jan 02 23:22:36 arch_1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Jan 02 23:22:36 arch_1 kernel: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
Jan 02 23:22:36 arch_1 kernel: nr_irqs_gsi: 40
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
Jan 02 23:22:36 arch_1 kernel: e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Jan 02 23:22:36 arch_1 kernel: Booting paravirtualized kernel on Xen
Jan 02 23:22:36 arch_1 kernel: Xen version: 4.3.1 (preserve-AD)
Jan 02 23:22:36 arch_1 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
Jan 02 23:22:36 arch_1 kernel: PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s86464 r8192 d24128 u262144
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Jan 02 23:22:36 arch_1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022431
Jan 02 23:22:36 arch_1 kernel: Policy zone: Normal
Jan 02 23:22:36 arch_1 kernel: Kernel command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console
Jan 02 23:22:36 arch_1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 02 23:22:36 arch_1 kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
Jan 02 23:22:36 arch_1 kernel: software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff880072a00000-
Jan 02 23:22:36 arch_1 kernel: Memory: 1857868K/8218224K available (5124K kernel code, 807K rwdata, 1628K roda
Jan 02 23:22:36 arch_1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan 02 23:22:36 arch_1 kernel: Preemptible hierarchical RCU implementation.
Jan 02 23:22:36 arch_1 kernel: RCU dyntick-idle grace-period acceleration is enabled.
Jan 02 23:22:36 arch_1 kernel: Dump stacks of tasks blocking RCU-preempt GP.
Jan 02 23:22:36 arch_1 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
Jan 02 23:22:36 arch_1 kernel: NR_IRQS:8448 nr_irqs:512 16
Jan 02 23:22:36 arch_1 kernel: xen: sci override: global_irq=9 trigger=0 polarity=0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 9 triggering 0 polarity 0
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=9 -> irq=9 (gsi=9)
Jan 02 23:22:36 arch_1 kernel: xen: acpi sci 9
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=1 -> irq=1 (gsi=1)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=2 -> irq=2 (gsi=2)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=3 -> irq=3 (gsi=3)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=4 -> irq=4 (gsi=4)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=5 -> irq=5 (gsi=5)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=6 -> irq=6 (gsi=6)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=7 -> irq=7 (gsi=7)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=8 -> irq=8 (gsi=8)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=10 -> irq=10 (gsi=10)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=11 -> irq=11 (gsi=11)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=12 -> irq=12 (gsi=12)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=13 -> irq=13 (gsi=13)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=14 -> irq=14 (gsi=14)
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=15 -> irq=15 (gsi=15)
Jan 02 23:22:36 arch_1 kernel: Console: colour VGA+ 80x25
Jan 02 23:22:36 arch_1 kernel: console [tty0] enabled
Jan 02 23:22:36 arch_1 kernel: allocated 33030144 bytes of page_cgroup
Jan 02 23:22:36 arch_1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 02 23:22:36 arch_1 kernel: Xen: using vcpuop timer interface
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 0
Jan 02 23:22:36 arch_1 kernel: tsc: Detected 2992.224 MHz processor
Jan 02 23:22:36 arch_1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5986
Jan 02 23:22:36 arch_1 kernel: pid_max: default: 32768 minimum: 301
Jan 02 23:22:36 arch_1 kernel: Security Framework initialized
Jan 02 23:22:36 arch_1 kernel: AppArmor: AppArmor disabled by boot time parameter
Jan 02 23:22:36 arch_1 kernel: Yama: becoming mindful.
Jan 02 23:22:36 arch_1 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 02 23:22:36 arch_1 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 02 23:22:36 arch_1 kernel: Mount-cache hash table entries: 256
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys memory
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys devices
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys freezer
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys net_cls
Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys blkio
Jan 02 23:22:36 arch_1 kernel: CPU: Physical Processor ID: 0
Jan 02 23:22:36 arch_1 kernel: CPU: Processor Core ID: 0
Jan 02 23:22:36 arch_1 kernel: mce: CPU supports 2 MCE banks
Jan 02 23:22:36 arch_1 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Jan 02 23:22:36 arch_1 kernel: Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
Jan 02 23:22:36 arch_1 kernel: ACPI: Core revision 20130725
Jan 02 23:22:36 arch_1 kernel: ACPI: All ACPI Tables successfully acquired
Jan 02 23:22:36 arch_1 kernel: ftrace: allocating 20318 entries in 80 pages
Jan 02 23:22:36 arch_1 kernel: Performance Events: unsupported p6 CPU model 23 no PMU driver, software events
Jan 02 23:22:36 arch_1 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 1
Jan 02 23:22:36 arch_1 kernel: Brought up 2 CPUs
Jan 02 23:22:36 arch_1 kernel: devtmpfs: initialized
Jan 02 23:22:36 arch_1 kernel: PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
Jan 02 23:22:36 arch_1 kernel: xen:grant_table: Grant tables using version 2 layout
Jan 02 23:22:36 arch_1 kernel: Grant table initialized
Jan 02 23:22:36 arch_1 kernel: RTC time: 4:22:33, date: 01/03/14
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 16
Jan 02 23:22:36 arch_1 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PCI registered
Jan 02 23:22:36 arch_1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Jan 02 23:22:36 arch_1 kernel: PCI: Using configuration type 1 for base access
Jan 02 23:22:36 arch_1 kernel: dmi type 0xB1 record - unknown flag
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-0> at 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Module Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jan 02 23:22:36 arch_1 kernel: ACPI: EC: Look up EC in DSDT
Jan 02 23:22:36 arch_1 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Jan 02 23:22:36 arch_1 kernel: ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0
Jan 02 23:22:36 arch_1 kernel: ACPI: Interpreter enabled
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hw
Jan 02 23:22:36 arch_1 kernel: ACPI: (supports S0 S1 S4 S5)
Jan 02 23:22:36 arch_1 kernel: ACPI: Using IOAPIC for interrupt routing
Jan 02 23:22:36 arch_1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and rep
Jan 02 23:22:36 arch_1 kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only par
Jan 02 23:22:36 arch_1 kernel: PCI host bridge to bus 0000:00
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
Jan 02 23:22:36 arch_1 kernel: DMAR: Forcing write-buffer flush capability
Jan 02 23:22:36 arch_1 kernel: DMAR: Disabling IOMMU for graphics on this chipset
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: PME# supported from D3hot
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff 64bit]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7880000-0xf789ffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xf78a0000-0xf78bffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7900000-0xf791ffff pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: [8086:105e] type 00 class 0x020000
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf78c0000-0xf78dffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x14: [mem 0xf78e0000-0xf78fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x18: [io 0xdce0-0xdcff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: [1102:0007] type 00 class 0x040100
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: reg 0x10: [io 0xcce0-0xccff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: supports D1 D2
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive deco
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
Jan 02 23:22:36 arch_1 kernel: ACPI: Enabled 2 GPEs in block 00 to 3F
Jan 02 23:22:36 arch_1 kernel: ACPI: \_SB_.PCI0: notify handler is installed
Jan 02 23:22:36 arch_1 kernel: Found 1 acpi root devices
Jan 02 23:22:36 arch_1 kernel: xen:balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: xen_balloon: Initialising balloon driver
Jan 02 23:22:36 arch_1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jan 02 23:22:36 arch_1 kernel: vgaarb: loaded
Jan 02 23:22:36 arch_1 kernel: vgaarb: bridge control possible 0000:00:02.0
Jan 02 23:22:36 arch_1 kernel: PCI: Using ACPI for IRQ routing
Jan 02 23:22:36 arch_1 kernel: PCI: pci_cache_line_size set to 64 bytes
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0xbd9ff000-0xbfffffff]
Jan 02 23:22:36 arch_1 kernel: NetLabel: Initializing
Jan 02 23:22:36 arch_1 kernel: NetLabel: domain hash size = 128
Jan 02 23:22:36 arch_1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jan 02 23:22:36 arch_1 kernel: NetLabel: unlabeled traffic allowed by default
Jan 02 23:22:36 arch_1 kernel: Switched to clocksource xen
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI init
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP registered
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0800-0x085f] could not be reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0c00-0x0c7f] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0860-0x08ff] has been reserved
Jan 02 23:22:36 arch_1 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: [dma 4]
Jan 02 23:22:36 arch_1 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 13 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 8 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 6 triggering 1 polarity 0
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: [dma 2]
Jan 02 23:22:36 arch_1 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Jan 02 23:22:36 arch_1 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI: found 7 devices
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP unregistered
Jan 02 23:22:36 arch_1 kernel: PM-Timer failed consistency check (0xffffff) - aborting.
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf79fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 1 [mem 0xf7600000-0xf76fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 2
Jan 02 23:22:36 arch_1 kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 02 23:22:36 arch_1 kernel: TCP: Hash tables configured (established 65536 bind 65536)
Jan 02 23:22:36 arch_1 kernel: TCP: reno registered
Jan 02 23:22:36 arch_1 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 1
Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: Boot video device
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=16 -> irq=16 (gsi=16)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=17 -> irq=17 (gsi=17)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=22 -> irq=22 (gsi=22)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=23 -> irq=23 (gsi=23)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=18 -> irq=18 (gsi=18)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: PCI: CLS 64 bytes, default 64
Jan 02 23:22:36 arch_1 kernel: Unpacking initramfs...
Jan 02 23:22:36 arch_1 kernel: Freeing initrd memory: 10924K (ffff880001f54000 - ffff8800029ff000)
Jan 02 23:22:36 arch_1 kernel: Simple Boot Flag at 0x7a set to 0x1
Jan 02 23:22:36 arch_1 kernel: Scanning for low memory corruption every 60 seconds
Jan 02 23:22:36 arch_1 kernel: audit: initializing netlink socket (disabled)
Jan 02 23:22:36 arch_1 kernel: type=2000 audit(1388722954.276:1): initialized
Jan 02 23:22:36 arch_1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 02 23:22:36 arch_1 kernel: zbud: loaded
Jan 02 23:22:36 arch_1 kernel: VFS: Disk quotas dquot_6.5.2
Jan 02 23:22:36 arch_1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 02 23:22:36 arch_1 kernel: msgmni has been set to 3650
Jan 02 23:22:36 arch_1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jan 02 23:22:36 arch_1 kernel: io scheduler noop registered
Jan 02 23:22:36 arch_1 kernel: io scheduler deadline registered
Jan 02 23:22:36 arch_1 kernel: io scheduler cfq registered (default)
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 02 23:22:36 arch_1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 02 23:22:36 arch_1 kernel: intel_idle: does not run on family 6 model 23
Jan 02 23:22:36 arch_1 kernel: GHES: HEST is not enabled!
Jan 02 23:22:36 arch_1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: 0000:00:03.3: ttyS0 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
Jan 02 23:22:36 arch_1 kernel: hpet_acpi_add: no address or irqs in _CRS
Jan 02 23:22:36 arch_1 kernel: Linux agpgart interface v0.103
Jan 02 23:22:36 arch_1 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan 02 23:22:36 arch_1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 02 23:22:36 arch_1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 02 23:22:36 arch_1 kernel: mousedev: PS/2 mouse device common for all mice
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: RTC can wake from S4
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
Jan 02 23:22:36 arch_1 kernel: drop_monitor: Initializing network drop monitor service
Jan 02 23:22:36 arch_1 kernel: TCP: cubic registered
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 10
Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 17
Jan 02 23:22:36 arch_1 kernel: Key type dns_resolver registered
Jan 02 23:22:36 arch_1 kernel: registered taskstats version 1
Jan 02 23:22:36 arch_1 kernel: Magic number: 14:436:362
Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: setting system clock to 2014-01-03 04:22:34 UTC (1388722954)
Jan 02 23:22:36 arch_1 kernel: PM: Hibernation image not present or could not be loaded.
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
Jan 02 23:22:36 arch_1 kernel: Write protecting the kernel read-only data: 8192k
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
Jan 02 23:22:36 arch_1 systemd-udevd[50]: starting version 208
Jan 02 23:22:36 arch_1 kernel: Floppy drive(s): fd0 is 1.44M
Jan 02 23:22:36 arch_1 kernel: ACPI: bus type USB registered
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbfs
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver hub
Jan 02 23:22:36 arch_1 kernel: SCSI subsystem initialized
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new device driver usb
Jan 02 23:22:36 arch_1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci: EHCI PCI platform driver
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
Jan 02 23:22:36 arch_1 kernel: FDC 0 is a post-1991 82077
Jan 02 23:22:36 arch_1 kernel: libata version 3.00 loaded.
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: version 3.0
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi0 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi1 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi2 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi3 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi4 : ahci
Jan 02 23:22:36 arch_1 kernel: scsi5 : ahci
Jan 02 23:22:36 arch_1 kernel: ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 58
Jan 02 23:22:36 arch_1 kernel: ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 58
Jan 02 23:22:36 arch_1 kernel: ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 58
Jan 02 23:22:36 arch_1 kernel: ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 58
Jan 02 23:22:36 arch_1 kernel: ata5: DUMMY
Jan 02 23:22:36 arch_1 kernel: ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 58
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: pata_acpi 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: debug port 1
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: 6 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
Jan 02 23:22:36 arch_1 kernel: ata_generic 0000:00:03.2: setting latency timer to 64
Jan 02 23:22:36 arch_1 kernel: scsi6 : ata_generic
Jan 02 23:22:36 arch_1 kernel: scsi7 : ata_generic
Jan 02 23:22:36 arch_1 kernel: ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
Jan 02 23:22:36 arch_1 kernel: ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
Jan 02 23:22:36 arch_1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata4: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata6: SATA link down (SStatus 0 SControl 300)
Jan 02 23:22:36 arch_1 kernel: ata2.00: ATAPI: PIONEER DVD-RW DVR-217D, 1.07, max UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: ATA-8: WDC WD15EARX-00ZUDB0, 80.00A80, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Jan 02 23:22:36 arch_1 kernel: ata1.00: ATA-6: WDC WD360GD-00FNA0, 34.06J34, max UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: 72303840 sectors, multi 0: LBA48
Jan 02 23:22:36 arch_1 kernel: ata1.00: applying bridge limits
Jan 02 23:22:36 arch_1 kernel: ata2.00: configured for UDMA/66
Jan 02 23:22:36 arch_1 kernel: ata3.00: configured for UDMA/133
Jan 02 23:22:36 arch_1 kernel: ata1.00: configured for UDMA/100
Jan 02 23:22:36 arch_1 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 34.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217D 1.07 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD15EARX-00Z 80.0 PQ: 0 ANSI: 5
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write Protect is off
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP
Jan 02 23:22:36 arch_1 kernel: sda: sda1 sda2
Jan 02 23:22:36 arch_1 kernel: sdb: sdb1
Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Jan 02 23:22:36 arch_1 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
Jan 02 23:22:36 arch_1 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 02 23:22:36 arch_1 kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 02 23:22:36 arch_1 kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: USB hub found
Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: 3 ports detected
Jan 02 23:22:36 arch_1 kernel: device-mapper: uevent: version 1.0.3
Jan 02 23:22:36 arch_1 kernel: device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-1> at 1
Jan 02 23:22:36 arch_1 kernel: usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
Jan 02 23:22:36 arch_1 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbhid
Jan 02 23:22:36 arch_1 kernel: usbhid: USB HID core driver
Jan 02 23:22:36 arch_1 kernel: input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/u
Jan 02 23:22:36 arch_1 kernel: hid-generic 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitec
Jan 02 23:22:36 arch_1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Jan 02 23:22:36 arch_1 kernel: usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
Jan 02 23:22:36 arch_1 systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SY
Jan 02 23:22:36 arch_1 systemd[1]: Detected virtualization 'xen'.
Jan 02 23:22:36 arch_1 systemd[1]: Set hostname to <arch_1>.
Jan 02 23:22:36 arch_1 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device dev-hvc0.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Remote File Systems.
Jan 02 23:22:36 arch_1 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
Jan 02 23:22:36 arch_1 systemd[1]: Starting LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on LVM2 metadata daemon socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Delayed Shutdown Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Paths.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on Journal Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Setup Virtual Console...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Load Kernel Modules...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Service...
Jan 02 23:22:36 arch_1 systemd[1]: Started Journal Service.
Jan 02 23:22:36 arch_1 systemd-journal[129]: Journal started
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Kernel Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Control Socket.
Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Coldplug all Devices...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Jan 02 23:22:36 arch_1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Po
Jan 02 23:22:36 arch_1 systemd[1]: Started Set Up Additional Binary Formats.
Jan 02 23:22:36 arch_1 systemd[1]: Starting Create list of required static device nodes for the current kernel
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Huge Pages File System...
Jan 02 23:22:36 arch_1 systemd[1]: Starting Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Reached target Encrypted Volumes.
Jan 02 23:22:36 arch_1 systemd[1]: Mounting Debug File System...
Jan 02 23:22:36 arch_1 systemd[1]: Mounting POSIX Message Queue File System...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Apply Kernel Variables...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Swap.
Jan 02 23:22:37 arch_1 systemd[1]: Started File System Check on Root Device.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Remount Root and Kernel File Systems...
Jan 02 23:22:37 arch_1 systemd[1]: Expecting device dev-disk-by\x2duuid-1f355bf1\x2d1469\x2d4722\x2d8f65\x2d01
Jan 02 23:22:37 arch_1 systemd[1]: Starting Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice Root Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice User and Session Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice System Slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-netctl.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-getty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-serial\x2dgetty.slice.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Slices.
Jan 02 23:22:37 arch_1 systemd[1]: Started udev Coldplug all Devices.
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Loaded
Jan 02 23:22:37 arch_1 kernel: RPC: Registered named UNIX socket transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered udp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp transport module.
Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'nfs'
Jan 02 23:22:37 arch_1 kernel: FS-Cache: Netfs 'nfs' registered for caching
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_evtchn'
Jan 02 23:22:37 arch_1 kernel: xen:xen_evtchn: Event-channel device installed
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntdev'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntalloc'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_blkback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_netback'
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_pciback'
Jan 02 23:22:37 arch_1 kernel: xen_pciback: backend is vpci
Jan 02 23:22:37 arch_1 kernel: ACPI: Requesting acpi_cpufreq
Jan 02 23:22:37 arch_1 kernel: Monitor-Mwait will be used to enter C-1 state
Jan 02 23:22:37 arch_1 kernel: Warning: Processor Platform Limit not supported.
Jan 02 23:22:37 arch_1 systemd[1]: Started Apply Kernel Variables.
Jan 02 23:22:37 arch_1 systemd[1]: Started Setup Virtual Console.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Huge Pages File System.
Jan 02 23:22:37 arch_1 kernel: xen_acpi_processor: Uploading Xen processor PM info
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Debug File System.
Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_acpi_processor'
Jan 02 23:22:37 arch_1 systemd[1]: Mounted POSIX Message Queue File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Load Kernel Modules.
Jan 02 23:22:37 arch_1 systemd[1]: Mounting Configuration File System...
Jan 02 23:22:37 arch_1 systemd[1]: Mounted FUSE Control File System.
Jan 02 23:22:37 arch_1 systemd[1]: Mounted Configuration File System.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create list of required static device nodes for the current kernel.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Create static device nodes in /dev...
Jan 02 23:22:37 arch_1 systemd[1]: Started Remount Root and Kernel File Systems.
Jan 02 23:22:37 arch_1 systemd[1]: Starting Load/Save Random Seed...
Jan 02 23:22:37 arch_1 kernel: EXT4-fs (dm-0): re-mounted. Opts: data=ordered
Jan 02 23:22:37 arch_1 systemd[1]: Started Load/Save Random Seed.
Jan 02 23:22:37 arch_1 systemd[1]: Started Create static device nodes in /dev.
Jan 02 23:22:37 arch_1 systemd[1]: Starting udev Kernel Device Manager...
Jan 02 23:22:37 arch_1 systemd[1]: Starting Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Reached target Local File Systems (Pre).
Jan 02 23:22:37 arch_1 systemd[1]: Mounting /tmp...
Jan 02 23:22:37 arch_1 systemd[1]: MountinI have the same problem on Fedora Core 20 with xen 4.3.1 32bit Sempron3200+ with turned off HPET tables on South bridge and these boot options
xen: noreboot nosmp console_to_ring console=vga vga=text-80x50
linux: pci=noacpi pci=nommconf
Image on Yandex disk
When I solve it I notify you.
Last edited by maskimko (2014-01-16 08:12:35) -
"Rise of Atlantis" Mac game created "out of range" message through switch
I've got a mac-mini. I've been running the mac game download from apple "Rise of Atlantis" for a while now. I have an older SONY SDM-HS95P DVI/SVGA monitor (capable of 1280 x 1024 resolution) connected to the mac via DVI to SVGA adapter out of the mac mini, and SVGA into the Monitor. No problems when launching or playing the game.
However, I just added an SVGA Distribution Amp to the chain (capable of 1600 x 1280). So now it's DVI to SVGA adapter out of the mac min, SVGA into the SVGA Distribution Amp, and one SVGA output of the DA goes to the SONY computer monitor, and the other SVGA output of the Distribution Amp goes to my SONY HDTV via it's PC/SVGA input. I did this so I could stream videos off the computer to the TV. This all works well. I change my screen resolution from 800 x 600 (when sitting in front of the computer so all text is very big because of bad eyes) to 1260 x 768 when streaming to the HDTV so the picture fills the screen.
However, I just introduced a problem with the game "Rise to Atlantis" that I didn't have before I added the distribution amp. When launching the game now, the screen flashes to black and I get an
"out of range" message. The message stays there, and from the mac mini, I can't even get it back to the normal screen without rebooting the mac mini.
However, if I remote into the Mac Mini via remote desktop connection from my 27" imac quad core, I can see the game and control the computer. But this isn't a viable solution.
I have tried setting the mac mini display resolutions to lower, middle and higher resolution settings before actually launching the program, but nothing helps. I also disconnected the SVGA output of the SVGA distribution amp. going to the HDTV to see if that would help, but it does not.
So it appears that the SVGA Distribution amp. is causing some sort of a hiccup that throws the SONY computer display to black and that "out of range" message.
Can anyone suggest anything that might allow me to keep things hooked up as they are and still be able to play the game? 'Rise of Atlantis" is a mac game, downloadable from apple, ....but it's the type of game that seems to take over the entire screen....so you can't see FINDER or your desktop when playing it...it's definetly throwing the SONY display into some sort of "take over" mode.
Any input would be appreciated.No, I did not try swapping the outputs as neither is marked primary or secondary, indicating that they were in any way different. However, I did resolve the issue. I didn't realize that in "Rise Of Atlantis" it was automatically set to display FULL SCREEN and that I could set it to NOT do that. I made that change and now I can see FINDER/DESKTOP behind the game while it still pretty much fills the screen and this has eliminated the problem I posted about. However, thank you very much for your input. I appreciate it.
-
All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
// Declare members:
private String companyId;
private String userName;
private String password;
private String developerKey;
private Date effDt;
private String greaterThanEffDt;
private String lessThanEffDt;
// Declare constants:
final static private String breakLine = "+---------------------------------------------------------------------------+";
final static private String format = "yyyy-mm-dd";
private enum ReqId {
PrimaryReq(25),
PrimaryReqCEO(26),
EmCarePrimary(27),
RTI(28),
EmCareClinical(29);
private int reqId;
private ReqId() {
private ReqId(int value) {
reqId = value;
public int getReqId() {
return reqId;
// Getters and Setters:
protected String getCompanyId() {
return this.companyId;
protected void setCompanyId(String value) {
this.companyId = value;
protected String getUserName() {
return this.userName;
protected void setUserName(String value) {
this.userName = value;
protected String getPassword() {
return this.password;
protected void setPassword(String value) {
this.password = value;
protected String getDeveloperKey() {
return this.developerKey;
protected void setDeveloperKey(String value) {
this.developerKey = value;
protected Date getEffDt() {
return this.effDt;
protected void setEffDt(Date value) {
this.effDt = value;
protected String getGreaterThanEffDt() {
return this.greaterThanEffDt;
protected void setGreaterThanEffDt(String value) {
this.greaterThanEffDt = value;
protected String getLessThanEffDt() {
return this.lessThanEffDt;
protected void setLessThanEffDt(String value) {
this.lessThanEffDt = value;
public void runProgram()
SFAPIService mySFAPIService;
String CompletionText = "";
String effDtStr2 = null;
/* Code your program logic here.
* Use getJDBCConnection method to get the connection object for any
* JDBC operations.
* Use CpContext provided commit,rollback methods to commit/rollback
* data base transactions.
* Don't forget to release the connection before returning from this
* method.
/* Call setCompletion method to set the request completion status and
* completion text.
* Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
* ReqCompletion.ERROR.
* Use Completion text message of length 240 characters. If it is more
* than 240 then full string will appear in log file and truncated 240
* characters will be used as request completion text.
try
ServiceFactory factory = ServiceFactory.newInstance();
mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
SFAPI api = mySFAPIService.getSFAPI();
/// SFAPI api = new SFAPI();
//Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
//requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
System.out.println("End Point => " + mySFAPIService.getServiceName().toString());
System.out.println(breakLine);
// Authentication: Login to SFAPI:
SFCredential credential = new SFCredential();
// Fake credentials being passed in for this post:
credential.setCompanyId("XXX");
credential.setUsername("XXX");
credential.setPassword("XXX");
credential.setDeveloperKey("XXX");
HTTPConnection httpsConnection = null;
OracleSSLCredential _credential = new OracleSSLCredential();
_credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
/*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
System.setProperty("javax.net.ssl.trustStorePassword","changeit");
System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
// SFParameter: Define a generic SFParameter List. This is a necessary parameter
// to invoking calls in SFAPI:
/*System.setProperty("javax.net.ssl.keyStore",
"file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
System.setProperty("javax.net.ssl.keyStorePassword","welcome"); */
/* System.setProperty("oracle.net.wallet_location",
"(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2) */
File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
boolean exists = kstore.exists();
if (!exists) {
System.out.println("Keystore does not exist");
else {
System.out.println("Keystore does exist");
System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
//System.setProperty("proxySet", "false");
//System.setProperty("http.proxyHost", "127.0.0.1");
//System.setProperty("http.proxyPort", "8080");
System.out.println(kstore.getAbsolutePath());
List<SFParameter> lst = new ArrayList<SFParameter>();
SFParameter param = new SFParameter();
param.setName("");
param.setValue("");
lst.add(param);
SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
Login login = new Login();
try {
login.setCredential(credential);
System.out.println("1");
login.setParam(sfParam);
System.out.println("2");
LoginResponse loginResponse = new LoginResponse();
LoginResult loginResult = new LoginResult();
try {
loginResponse = api.login(login);
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("3");
try {
loginResult = loginResponse.getResult();
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("4");
IsValidSession vs = new IsValidSession();
IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
System.out.println("5");
if (isValidSessionResponse.isResult()) {
System.out.println("Session is valid");
System.out.println("Result => " + loginResult.getSessionId());
System.out.println(breakLine);
Logout logout = new Logout();
LogoutResponse logoutResponse = api.logout(logout);
if (logoutResponse.isResult()) {
System.out.println("Logout of SFAPI Successful");
else {
System.out.println("Logout of SFAPI Unsuccessful");
else {
System.out.println("Session is invalid");
List<Error> errors = new ArrayList<Error>();
for (int i = 0; i < loginResult.getError().length; i++) {
errors.add(loginResult.getError()[i]);
for (int i = 0; i < errors.size(); i++) {
System.out.println("Error Indice => " + i);
System.out.println("Error Code: => " + errors.get(i).getErrorCode());
System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
System.out.println(breakLine);
} // end for loop of SFObject errors
} // end InvalidSession
catch (Exception e)
System.out.println("Session Credential Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
catch (Exception e)
System.out.println("Parameter List Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
} // end runProgram
// Constructor:
public SFAPITest() {
} // end constructor
public static void main (String args[]) {
try
SFAPITest test = new SFAPITest();
test.runProgram();
catch (Exception e) {
System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two. -
I am getting a "screen output out of range" change settings etc etc message every few days witha reduced size screen. I have to reboot the computer to get a "normal" screen . I am on a Apple mini mac with an hp2009m monitor.
Hello @kpskhalsa,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor indicates that the screen is out of range when connected to your Macintosh computer, and I would be happy to assist you in this matter!
According to this document on using HP Monitors on a Mac:
"HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Editing non standard video sizes
Hello everyone.
I have a load of video which is 1120 x 593 its basically screen capture video from my PC in mov format. All i want to do is edit these clips together and add some nice effects. So anyway i toddled off and bought a copy of of premier elements and started movie making!
Anyway i can't seem to figure out how to retain the size of my video as ive got to use a project template, which is great if you are using video from a device but my video is a non standard size. Surely there is a way of doing this?
Do i have to make sure that my imput video matches one of the template, surely not? You must be able somehow to do your own size?
ThanksThank you for replying.
Basically I like to fly x-plane flight simulator which gives you the ability to record your flying and outputs the video as a high quality mov. I wanted to use premier elements just to make a movie of different clips and just add a few effects and titles I was just going to output them as fla to watch on my pc or the web. Or as Mpeg 4 to put into powerpoints
I tried using some of the presets but the quality is either awful or i get the black border.
I seems that only the profesional edition allows you to set the frame to desktop and use a custom size. I just can't believe that you need to spend £500 on the CS5 edition to do this? I'm not wanting to do anything clever here, just change the video size.
Ive got a sinking feeling ive just wasted £75. -
Is there a final video size limit or restriction when rendering a composition?
Im a self thought After effect user, so I might not know the exact terms that I need to use for my question. I need to create a video thats is in its final size 1080x3840 px. This is being used in a two screen setup and being played by a single player that splits this on video into the two screens without having to create two separate videos. I can create the composition size to the pixels needed but when I render the video it automatically refers the video to 1080x1920 px which is the size of only one screen. When this render happens the top and bottom of the video get cut off. I have create the final video to 3840x1080 px but this is not what works for the set up. Does After Effects have a height limit when it comes to the final output of the composition? If it does, can it be unlocked so i can create the final 1080x3840 px? Do I need to use an other program to accomplish this, anything would help. The codec I'm using is H.264 at a 10 Mbps. Thank you
Well what i got from them is that they need the the file to be on H.264 codec at 10-15 Mbps at the size of 3840x1080 px. It would be played by one player that uses the H.264 codec. All i need is to be able to do is to output the final video to the size they are asking since everything else works fine. I want to know if i could make the final video size in After Effects or if I have to switch the layout to 1080x3480 px since that has no restrains and then bring it into another program. I have done multiple video files for them and the work fine but they are not to the size they need since every time I render the composition it crops it from 3840x1080 px to 1920x1080 px leaving the the top and bottom of the video out completely.
-
hi,
i want to use imovie for some basic editting and rendering.
i have a load of mov's, captured using snapz pro x at 720x480 that i simply want to import, cut bits out, and export as one file for use in idvd.
i have 2 questions...
1. is there a way, in imovie, to change the end video size? im using 720x480 source files, and when i export as a movie it either crams it into a 640x480, or letterboxes it. i just want the output size to stay the same as the input size (720x480). if not, whats the optimum size people use for tv viewing?
2. the content of my video is pretty intricate. its got a feint grey box in the middle of the screen, which the video plays in (screen in screen basically).
assuming that imovie will only give me 640x480 output, i cropped the clips to 640x480, inputted them, pieced them together, and outputed them. imovie gives me the right size, but really messes up the video. the grey line is blurred and not visible at the bottom, and the moving images themselves look awful.
all i want is to export a video that has the same properties (size, resolution etc) as the input files!
if screen grabs would help, i can put some up.
thanks in advanceyes, i've had varied success with transferring screen grabs to tv. problem is, its the only option - im using a moving image enivronment (pure data) and the only way to save the video you create is through snapz (well, theres no way of saving it within the software).
one way i will try is to video out from the laptop into a tv and record with a dvd recorder, see if that helps.
i think its trial and error with the captures. the 720x480 looked pretty good, but the refresh rate was out and it flickered a fair bit. the refresh rate was better on 640x480, but it didnt look as good.
thanks for the advice -
We are trying to migrate our 10.6.8 wikis from the OS X Server to our new Mountain Lion OS X Server. I am using "wikiadmin migration -r <collaboration directory> -g <wiki name>" to migrate each wiki individually. We have about 30 wikis in the old server, three of which fail to migrate, all with the same problem (below). The process runs successfully for a while, but ultimately fails and rolls back the transaction. It appears there is some problem trying to generate a unique filename, perhaps for some of the uploaded files?
Has anyone else seen this error? large amount of pages, content, and attachments in these wikis and just recreating them in the new server would be a monumental task. Some of these attachments include videos and other large files, not sure if that might contribute to the problem.
=== wikiadmin migrate output log ===
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:233 7e7e1180 +0ms] Executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:181 7e7e1180 +151ms] Query result is [PGRES_FATAL_ERROR] rows returned=0/updated=
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Error>: [PGCConnection:148 7e7e1180 +0ms] Error in TXN: Error executing query [INSERT INTO entity (uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden) (SELECT uid, tiny_id, entity_type_fk, short_name, long_name, description, create_time, update_time, createdby_user_fk, updatedby_user_fk, ownedby_uid_fk, owner_entity_type_fk, is_hidden FROM master_entity_scratch_20120829T132314 WHERE entity_type_fk='com.apple.entity.File')]: ERROR: value "109120715161" is out of range for type integer
CONTEXT: PL/pgSQL function "uniquify_filename" line 7 at RETURN
PL/pgSQL function "trg_update_entity_filename" line 23 at assignment
0 CoreFoundation 0x00007fff93b67716 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff95aaf470 objc_exception_throw + 43
2 PostgreSQLClient 0x00000001026ff9ae -[PGCConnection checkResultOK:forSQL:] + 360
3 PostgreSQLClient 0x00000001026ffec3 -[PGCConnection executeQuery:] + 223
4 wikiadmin 0x000000010269d586 wikiadmin + 66950
5 PostgreSQLClient 0x00000001026ff5f7 -[PGCConnection transactionInBlock:onError:] + 147
6 wikiadmin 0x000000010269cd86 wikiadmin + 64902
7 wikiadmin 0x00000001026a025d wikiadmin + 78429
8 wikiadmin 0x00000001026924c8 wikiadmin + 21704
9 libdyld.dylib 0x00007fff912857e1 start + 0
10 ??? 0x0000000000000006 0x0 + 6
Aug 29 13:25:11 gslcwiki.local wikiadmin[54032] <Debug>: [PGCConnection:320 7e7e1180 +0ms] Executing update [ROLLBACK]Okay, so a little more detail for you…
If I can manage to restart the server without the wiki service on, everything else seems to work fine (including the web service running the default home page) and "serveradmin fullstatus wiki" will report that the service is stopped.
But as soon as I try to start the wiki service, it never finishes, and it prevents the web service from working properly anymore. i.e. I get a 502 Proxy Error instead of the OS X Server default home page. It's after the attempted wiki start that "serveradmin fullstatus wiki" starts to give the
serveradmin[2373:707] outstanding requests are: (
Command = getState;
Module = "servermgr_wiki";
Timestamp = "2012-10-25 16:22:15 +0000";
error. And then I can't stop the wiki service - even "serveradmin stop wiki" gives the same "outstanding requests" message.
This time I tried to stop the wiki from Server app and I got this error:
An error occurred on the server while processing a command.
The error occurred while processing a command of type 'getState' in plug-in 'servermgr_wiki'.
If it's helpful at all, I've notice the following in my log files that seem related, but I have no idea how to fix - it almost seems lie the migration of the wiki failed from 10.7 to 10.8:
collabd[767]: [CSConnectionPool:141 6a92000 +14027ms] Schema is STILL out of date (14 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.
I'm really pulling my hair out over here, and have no idea what to try next?
Anyone have any suggestions?
Thank you! -
I have created a movie in Premiere Elements that uses hi-def video, still images, narration and a soundtrack. The movie is about 1 hour long. Once the movie reached its final length of about 1 hour, the output file size of the movie to be burned to Blu-ray was consistently around 11 GB. For reasons I don't understand, the output file size has abruptly grown to 26 GB. I have not added any significant footage or effects since I reached the 1 hour mark. I've only made very small tweaks to the audio balance and transitions.
The only thing that I can think of that might have caused this growth is that I went into the project settings and turned off "optimize stills." I may also have turned on "maximum bit depth." When I clicked ok, Premiere Elements told me that it had to re-render the project, which i did so. Since then, though, i have re-enabled "optimize stills" and turned off "maximize bit depth." I have also re-rendered the project again. My file size is still 26 GB.
I am running PE on a 3.06 GHZ laptop with 6 GB of ram. Running Windows 7, 64-bit.
Has anyone else run into this issue?The only thing that I can think of that might have caused this growth is that I went into the project settings and turned off "optimize stills." I may also have turned on "maximum bit depth."
File size is dependent on Bit-Rate and on Duration. If you have upped the Bit-Rate, you will see an increase in file size. Will the Project still fit on your BD? If so, and you want highest quality, the Bit-Rate and Bit-Depth can just stay higher. If space is an issue, then you can drop these down a bit.
Something else to think about and look for is has your Duration changed. This can be caused by "Orphans," out beyond where you intend your Timeline to end. This ARTICLE will give you some tips. This is easy to check.
Good luck,
Hunt
Maybe you are looking for
-
Help redoing a query resulting in many unions
Trying to do a query that basically shows a when a customer was visited in a certain period. I have done this as follows: SELECT custname, sysdate dateperiodfor, MAX(datevisited)datevisited FROM visited,customer WHERE custid =visitedcust
-
Synchronous Interface to Multiple Receivers
Hi all, I have the following scenario working great SAP Proxy call out to a Soap Adapter receive the response and update SAP. So a single synchronous call to one receiver is working great. However I'd like the ability to also publish this informatio
-
Hey there Is there any way to swap the dsiplay arrangement when using 2 monitors with speedgrade? Am I missing something very basic? Thanks
-
Migration from MS Access to Oracle 8
Sir, I have exported the MS Access table from MS Access to Oracle in the following way. I have selected the table from MS Access and clicked on export and then it asked for exporting option. I have selected ODBC databases and given the option from 'e
-
Runtime.exec() opening dos window.
I heard that in newer version of java (>java 1.2 ) if Runtime.exec() is used to execute some native program, a black dos promt is popped up automatically and closed when the execution of the native program is completed. Will this happen every time I