Out of scope error while attaching the attribute set and the operating unit

Hi,
Am getting the out of scope error when am trying to attach the attribute set "/oracle/apps/fnd/attributesets/HrOperatingUnits/OperatingUnitName_Transient"
and the operating unit lov "/oracle/apps/fnd/multiorg/lov/webui/OperatingUnitsLovRN" from my page in JDeveloper.
Can anyone help?
Thanks

Mostly
It would just be a warning message you can proceed with it there are no issues.But if its an error please do as mentioned by Reetesh.
Thanks
AJ

Similar Messages

TA25179 my text messages are coming through out of order and i have checked the time setting and the software version. Everything is up to date! Very frustrating... any other suggestions?

My text messages are coming through out of order! I have checked the software and the time setting is on automatic!! Very frustrating... any other advice??

When reception allows the iPhone sends and receives the messages, this is also dependent on the reception of the other phone you are communicating with. If you really feel you have a problem, contact your Carrier about the problem.

How to keep the page-setting and the extension of a file uploaded to a form

Hi,
I created a form based on table witch contain a blob.
If i upload into it an HTML file, when i load it in a report it look fine. But, if i upload a MSword or PDF file
it display binary characters.
Please help.
Thanks.

Hi Scafandri ,
LEAD SELECTION IS A PROPERTY OF A NODE. YOU CAN CHECK AND UNCHECK THAT PROPERTY UNDER NODE PROPERTIES.
OR IF YOU WANT TO SET SELECTED ROW AS LEAD SELECTION THEN USE THE BELOW LINK IT WOULD BE HELPFUL
retreiving the selected row index value
In onclick event of alv table,
first get the index value of selected row using r_param->get_index( ).
Then using this value set lead selection like below
lo_nd_itab->set_lead_selection_by_index ( above index value ).
Then selected row will become the leadselection.
Regards
Srinivas

Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production.

Error while adding a attribute to the the Custom view through a wizard

Hi ,
I have created a new custom view with value node through wizard succesfully.
Now I want to add a new attribute to that node.I am trying to do that by a wizard.
But i am getting the follwing error " Error during analysis of Source Code" although i have
commented or removed my all custom code from that view.
I tried adding the new aattributes in the metthods "IF_BSP_MODEL~INIT " and
"GET_TABLE_LINE_SAMPLE " manually but that also does not worked.
Plz help me with this asap.
Regards,
Sharad

Hi Sharad,
I hope all your classes are active. In case you want to add a new attribute there are two steps.
1.Right click on context node and create attribute, it opens a wizard and continue. This will add the field in the context node and generate the getter-setter methods.
2. In the above two method whcih you mentioned add the new field in the structure of value node. And then create your own getter-setter methods. and activate it. After this you will be able to see the attribute added in the context node.
By using any of the two approaches you will be able to see teh new field in the configuration.
Hope this helps.
Regards,
Ruby.

Error while attaching a image in forms10g envion..

hi
i am getting this error while attaching a image in forms 10g enviornment.
ERROR>WUC-24 [URLDownload.pullFile()] Error reading URL http :// 10.80.50.222:7778/forms90/webutil/jacob.dll
regards
Geo.

did you install jacob ? with the correct version number described in the installation-guides.
jacob is not an oracle tool, which normally is only useful for COM-commands against windows.
What did you do with the image?

Error while running 'ldifde.exe' to import the schema file

Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )

Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

Giving error while creating a sales contact for the previous year (2008)

Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna Seeta

Hi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta

Error while executing SSIS Package after upgrading the Oracle Client

Hello,
I am running to the below error after we upgraded the Oracle client to 11g from 10g. The source of the Data is Oracle database . Looked online but each error is pointing towards different route, Confused here any help is very much appreciated. Have to say
I am not a pro with SSIS.
SSIS package "Bentek_ISO_Package (2).dtsx" starting.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
Information: 0x40043006 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Temp_tbl Injection Data Flow Task, OLE DB Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-12801: error signaled in parallel query server P183, instance *****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-12801: error signaled in parallel query server P183, instance ****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
Error: 0xC004701A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC0202009.
Information: 0x4004300B at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: "component "OLE DB Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Temp_tbl Injection Data Flow Task
Warning: 0x80019002 at *******: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "****** (2).dtsx" finished: Failure.

Do you have any Date conversion functions in your Oracle datetime fields? I did run into a similar issue when we upgraded the oracle client and the provider started to decipher the metadata of the date columns. The SSIS metadata conversion for the date
columns yielded dates that were not valid. I had to update my queries to use the TO_CHAR conversion to bring it out as a string and then save it to the date field.
TO_CHAR (DATE, 'MM/DD/YYYY HH24:MI:SS')
Regards, Dinesh

Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.

Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic

Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached an email back to the sender and a preset admin password would open it

Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached to an email back to the sender and a preset admin password would open it?

Hello Graphicsguy123,
You would need to first create the form ( or Widget in EchoSign) first to generate a url which you can paste it in the email being sent to customers. You would need to make sure you have a Document Cloud Enterprise Premium account in order to create a Widget. If you don't have the account, you can use the trial version to test it. Here is the link:
Global Trial Registration | eSign services from Adobe
-Rijul

"Sync encountered an error while connecting: Failed to connect to the server. Please try again."

"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
Thanks

Hi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

When you double click the circle buttom, and the little bar pops up from what you have been using... is it using data while being in there? is it a good idea to minimize evertthing out of there often so its not using more data ? or does it not matter?

when you double click the circle buttom, and the little bar pops up from what you have been using... is it using data while being in there? is it a good idea to minimize evertthing out of there often so its not using more data ? or does it not matter?
thanks!

Not sure if it uses data, but that allows you to multitask. To save battery life you should close out of all the apps.

Out of scope error while attaching the attribute set and the operating unit

Similar Messages

Maybe you are looking for