Out of Sync after Red Frames

I'm capturing HD footage from an FX1 camera into my computer. Each clip is appx. 1 hour long (the length of a MiniDV tape). Almost every clip has red frames, after which the audio is always out of sync. Yet when I play the clips in Windows Media Player they are comletely in sync. How can I get Premiere Pro CS4 to play these same clips in sync, the way Windows Media Player does?

I only use new tapes and I clean the heads on the FX1. But that is not the answer to the question I asked. How can I get my very expensice Ppro CS4 to play the clips in sync, the same way my free Windows Media Player plays the same clips in sync?.

Similar Messages

  • Audio out of sync after changing frame rate

    Hello
    I just changed frame rate from 23.976fps to 24fps inside sequence setting, and the audio is out of sync in timeline.  I can certainly manually right click mouse and choose slip into sync, but it's a tedious job.  Anyone knows why and quick solution?
    Thanks
    Richard
    ps I use 2014.2 latest version

    >Frame rate mode                  : Variable
    No version of Premiere does "well" with Variable Frame Rate
    Below is about iphone, but may help
    Some people find that Iphone won't edit easily because it uses a variable frame rate
    - A possible fix in message #22 http://forums.adobe.com/thread/934466

  • Mac OS X partition ("Macintosh HD") gets out of sync after hibernation

    Hello,
    I have a first-generation Unibody 15" MacBook Pro. I run Mac OS X Lion and Windows XP Profession 32-bit through Boot Camp on it.
    I notice that the Mac OS X partition gets out of sync after I hibernate in Windows XP, reboot into Mac OS X Lion, restart and resume Windows XP. Certain folders would remain visible in Windows Explorer but become inaccessible, while some folders that I just created in Mac OS X would not even show up.
    Is there a way to tell Windows XP to "remount" the HFS+ partition?
    Steps to reproduce:
    Boot into Windows XP;
    Hibernate Windows XP;
    Boot into Mac OS X;
    Pick a folder and change something in it;
    Create a new folder;
    Reboot and resume Windows XP;
    Open "Windows Explorer";
    Try to access the folders you just meddled with.

    SwordAngel wrote:
    Hello,
    I have a first-generation Unibody 15" MacBook Pro. I run Mac OS X Lion and Windows XP Profession 32-bit through Boot Camp on it.
    I notice that the Mac OS X partition gets out of sync after I hibernate in Windows XP, reboot into Mac OS X Lion, restart and resume Windows XP. Certain folders would remain visible in Windows Explorer but become inaccessible, while some folders that I just created in Mac OS X would not even show up.
    Is there a way to tell Windows XP to "remount" the HFS+ partition?
    Steps to reproduce:
    Boot into Windows XP;
    Hibernate Windows XP;
    Boot into Mac OS X;
    Pick a folder and change something in it;
    Create a new folder;
    Reboot and resume Windows XP;
    Open "Windows Explorer";
    Try to access the folders you just meddled with.
    Don't hibernate, shut XP down when you reboot and the issue goes away, you really should consider using a more modern operating system.

  • Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

    Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

    For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
    For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
    For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI.

  • My audio goes out of sync after import

    I have a bunch of masters of 1h documentaries that I've done using Adobe Premiere CS6. I've exported the masters using exactly the same specs:
    Apple Pro Res 422 (HQ), 23.98fps, 1920x1080p, 48kHz, 16b, PCM audio.
    I have to do some changes on the masters of these shows. They all play fine on several players like VLC, Quicktime, Mpeg Streamclip, etc. However after I import the masters into Premiere Pro CC, 3 out of 10 shows get the audio gradually out of sync, even on the source monitor before I put them on a timeline. The behaviour continues even after I place them on a timeline.
    The project settings are the same as the masters and so are the sequence settings. I've tried to recreate the project, delete and re-import, duplicate the file and import that, and no matter what I do the same 3 masters go out of sync after the import.
    I've tried to find a solution in many forums and despite noticing that several people have the same issue, no one has a valid solution for my problem.
    I cannot go back to CS6 since my company updated their systems to CS7 so I can't even cross check.
    Any suggestion will be most welcome.
    Thanks in advance peeps.
    NJ

    Couple of suggestions.
    First, rather than opening the Master export, go back to the original project.  That should open fine in CC.
    Second, with a CC subscription, you do have access to the full CS6 suite.

  • Audio out of sync after exporting into Quicktime using current settings.

    Quicktime file has audio out of sync when I export to quicktime movie using current settings.
    Ok for about the first few minutes then, out of sync after about 10 minutes.
    I shot the footage on tape with my Sony HVR-Z7u.
    My Sequence setting is the same as the format of the footage as shown below.
    Pixel Aspect Ratio: HD 1440x1080
    Editing Time base: 23.98
    Quicktime video settings: Compressor: HDV 1080p24
    Audio Settings: Rate 48 KHz
    Depth: 16bit
    Clip format:
    Pixel Aspect Ratio: HD 1440x1080
    Vid Rate: 23.98
    Compressor: HDV 1080p24
    Audio Rate 48 KHz
    Audio Format: 16bit

    I recently moved and both of my editing machines were unplugged for a couple of days until I could get them set up. After turning them back on, the problem had disappeared. Perhaps leaving the system unplugged had allowed some of the internal components to reset? That's the only thing I can think of. At any rate, the issue is gone.

  • Does anyone know a fix for video being out of sync after publishing to Flash in Captivate 6?

    I'm working in Captivate 6.0.2.325 on Mac OS 10.6.8. My Captivate file is just 10 slides, and 2 of them contain talking-head style video clips 30 - 40 seconds long.
    Everything looks fine in Preview, but when I publish to Flash the video segments appear choppy and the audio is badly out of sync.
    Also, I have one slide where the audio does not play after publishing, though it plays in Preview. It's a widget slide.
    I have tried the fixes suggested in this forum. My Preferences slider is slid all the way to retain slide quality etc. I've tried changing Flash versions and forcing re-publishing of slides. I've tried copying all my slides into a new file. No luck.
    I have spent approximately 6 hours trying to resolve this problem and I'm about at the end of my rope, so any suggestions will be much appreciated! I will have to insert LOTS more video segments to complete this project.
    Thank you!

    Thank you, Rod!
    While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
    This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
    When I unclick the "scalable HTML content" button before publishing, the video is fine!
    Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid")

  • Audio out of sync after importing .MOV

    Experiencing audio out-of-sync issues after importing a .mov clip into Premiere Pro.
    The .mov clip causing the problem does not have a problem when played with quicktime or vlc: The audio matches the video perfectly.
    Adobe Premiere Pro CC 7.2.1 (4) on OSX 10.9.1
    Open Premiere, New Project ... > OK > Import the single video clip (whether by dragging into the app, or using the Media Browser). Start playing the clip in the Source monitor, scrub forward. Result: audio and video are way out of sync.
    The .mov clip causing the problem was exported from Silverback app.  http://silverbackapp.com/
    Details about the .mov clip, via Media Inspector app:
    ============================================================
    General
    Complete name                    : /Users/jukeboxhero/20140203.mov
    Format                           : MPEG-4
    Format profile                   : QuickTime
    Codec ID                         : qt 
    File size                        : 638 MiB
    Duration                         : 34mn 46s
    Overall bit rate                 : 2 566 Kbps
    Encoded date                     : UTC 2014-02-04 06:52:45
    Tagged date                      : UTC 2014-02-06 15:55:40
    Writing library                  : Apple QuickTime
    Video
    ID                               : 2
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : No
    Format settings, ReFrames        : 2 frames
    Format settings, GOP             : M=2, N=30
    Codec ID                         : avc1
    Codec ID/Info                    : Advanced Video Coding
    Duration                         : 34mn 46s
    Bit rate mode                    : Variable
    Bit rate                         : 2 449 Kbps
    Width                            : 1 920 pixels
    Height                           : 1 080 pixels
    Display aspect ratio             : 16:9
    Frame rate mode                  : Variable
    Frame rate                       : 18.969 fps
    Minimum frame rate               : 6.522 fps
    Maximum frame rate               : 19.355 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.062
    Stream size                      : 609 MiB (95%)
    Language                         : English
    Encoded date                     : UTC 2014-02-04 06:52:46
    Tagged date                      : UTC 2014-02-04 15:27:35
    Color primaries                  : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
    Transfer characteristics         : BT.709-5, BT.1361
    Matrix coefficients              : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
    Audio
    ID                               : 1
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format profile                   : LC
    Codec ID                         : 40
    Duration                         : 34mn 45s
    Bit rate mode                    : Constant
    Bit rate                         : 104 Kbps
    Nominal bit rate                 : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 44.1 KHz
    Compression mode                 : Lossy
    Stream size                      : 25.9 MiB (4%)
    Language                         : English
    Encoded date                     : UTC 2014-02-04 06:52:45
    Tagged date                      : UTC 2014-02-04 15:27:35
    ============================================================
    The video imports perfectly into Final Cut Pro 10.1.1
    I have Premiere Pro trial and Final Cut Pro trial. If there's no fix or easy work-around, I will have to ditch Premiere.

    >Frame rate mode                  : Variable
    No version of Premiere does "well" with Variable Frame Rate
    Below is about iphone, but may help
    Some people find that Iphone won't edit easily because it uses a variable frame rate
    - A possible fix in message #22 http://forums.adobe.com/thread/934466

  • Audio is out of sync after capture.

    I'm attempting an firewire capture from a DV source. When I'm logging clips and previewing them, the sound is fine, but when I view them after capture the audio is out of sync. I think I'm having timecode issues, is there any way around this?

    I tried watching them in the timeline and viewer, all out of sync. No external monitor. I did get a message once about dropped frames and something else, it said I might have these issues, but it didn't tell me to change settings, just told me it was gonna happen, lol. So, I don't know where to start to fix it.

  • Audio falling out of Sync after importing into PP

    Hello there,
    I'm relatively new to this, so please when you're helping me, dummy it down as much as you possibly can.
    I've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video  it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.
    I have no idea why it does this or what to do. When I play the original raw video the audio and video are both on time.
    After googling this issue for about 40 minutes (and i'm not 100% sure what this means but I have a general idea) I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
    Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack.
    I looked on xsplit and there was a setting that i could enable to force constant frame rate.... is this a solution to that problem?
    Please, help me.
    Thank you.

    If your current video file DOES use a Variable Frame Rate, it will not edit properly in any version of Premiere
    Force your software to create a Constant Frame Rate file and try again
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    variable frame rate
    or
    VFR
    You may now read all the previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

  • Audio out of sync AFTER importing

    Hello, how are you?
    I've been searching for a solution for a while, but I can't seen to find any.
    The thing is... I've been capturing some gameplay footage, with files that last an hour or even more.
    When I watch the files in any player (Windows Media Player, VLC, Media Player Classic) they play fine, the audio and the video seems to be on sync and OK.
    But after I import to Adobe Premiere, it just gets out of sync. Even when I watch in the Source Monitor, before dragging to the timeline.
    It looks like there is a problem when conforming the audio.
    But even the time duration is different from the original, there is some frames or even seconds of difference inside Premiere.
    And this happens with different codecs, AVI (from FRAPS), H.264 (with AAC audio and MP3)...
    I've tried cleaning the cache, deleting the software and reinstalling again, converting - everything.
    Some are saying this is a recurrent bug on Adobe Premiere. Isn't there any fix or something that I could do?
    It's really strange that the problems only occur AFTER importing. Outside of Premiere is fine, so there is no problem with the capture, right?
    I would really appreciate if someone helps me. Thanks a lot!
    PS: I have Adobe Premiere Pro CS6.
    Intel Core i7
    12 GB RAM
    GeForce GTX 580
    HD 2 TB 7200RPM

    My problem is a bit different, though just as irritating.  I can't believe Adobe hasn't fixed this given how long since the original post has been up here.  I capture satellite programming from a professional c-band satellite every week.  I use good old fashion Quicktime to capture 30 minute programs for later broadcast.  Our job is to capture the video from the satellite, clip the commercials at the beginning and end of the program and then export a clean version as an MPEG2 file.  Quicktime provides two capture settings: high (which provides a very large ProRes file in 16bit stereo) or medium (which provides a manageable H264 file in AAC stereo).  Both are Quicktime files. 
    While I don't have sync issues with the ProRes file, the file that is captured using H264 and the AAC stereo gets pushed out of sync by just enough frames to make it necessary to fix. This is adding about 2 to 3 hours of studio time each week to our production given we have to process about a dozen of these files. Viewing the original quicklime files using the newest version of quicklime or the old Quicktime program and most other video players yields a perfectly in-sync experience; it's just when it's imported into Premier Pro CC 2014 that the sync. problem appears.  One solution that has worked is taking the master file and exporting it again as a .dv file, but this actually takes longer than fixing the sync issue within Premiere. My guess is it may be the AAC audio process that may be the problem.
    We only started using Premiere a few months ago and are already re-evaluating whether we should return to FCP.  We were really like most of the Adobe apps within Creative Cloud, but we use Premiere to much to put up with such a major flaw. I do wish Adobe would monitor some of these forums; they have no idea how customer service plays a key role for future software purchases.

  • Audio and Video out of Sync after Pro Res export

    I´m getting an audio/video sync issue when I´m exporting to Pro Res.
    I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
    The sequence is less than 20 minutes long. It plays correctly on the timeline.
    When I export the sequence for DVD and view it on a set top it plays absolutely fine.
    When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
    The audio and video clips are of the exact same duration.
    Possible issues...
    Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
    Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
    Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
    Any help would be greatly appreciated.

    First, yes resample the narration to 48k 16 bit.  You will probably be able to reconnect to the resampled files.  Usually works for me.   That's a simple fix and will probably solve the problem.  If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
    Wait, just reread your original post.  Export from fcp using file:  export:  quicktime movie NOT quicktime conversion with current settings.  If that works without synch issues, use compressor to convert to prores.

  • Audio and video out of sync after import

    I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
    As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
    Any ideas?

    Thanks. Here's the output:
    General
    Format : MPEG-4
    Format profile : Base Media / Version 2
    Codec ID : mp42
    File size : 1.05 GiB
    Duration : 51mn 20s
    Overall bit rate mode : Variable
    Overall bit rate : 2 937 Kbps
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Writing application : HandBrake 0.10.1 2015030800
    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : [email protected]
    Format settings, CABAC : Yes
    Format settings, ReFrames : 4 frames
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 51mn 20s
    Bit rate : 2 606 Kbps
    Width : 720 pixels
    Height : 478 pixels
    Display aspect ratio : 4:3
    Frame rate mode : Variable
    Frame rate : 24.145 fps
    Minimum frame rate : 0.167 fps
    Maximum frame rate : 29.970 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Bits/(Pixel*Frame) : 0.314
    Stream size : 957 MiB (89%)
    Writing library : x264 core 142 r2479 dd79a61
    Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Color range : Limited
    Color primaries : BT.601 NTSC
    Transfer characteristics : BT.709
    Matrix coefficients : BT.601
    Audio #1
    ID : 2
    Format : AAC
    Format/Info : Advanced Audio Codec
    Format profile : LC
    Codec ID : 40
    Duration : 51mn 20s
    Bit rate mode : Variable
    Bit rate : 132 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 47.9 MiB (4%)
    Title : Stereo / Stereo
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Audio #2
    ID : 3
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Format settings, Endianness : Big
    Codec ID : ac-3
    Duration : 51mn 20s
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 70.5 MiB (7%)
    Title : Stereo / Stereo
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Menu
    ID : 4
    Codec ID : text
    Duration : 51mn 20s
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Bit rate mode : CBR
    00:00:00.000 : Chapter 2
    00:01:50.877 : Chapter 3
    00:03:59.218 : Chapter 4
    00:13:26.285 : Chapter 5
    00:20:57.685 : Chapter 6
    00:32:58.489 : Chapter 7
    00:39:14.031 : Chapter 8
    00:50:51.611 : Chapter 9

  • Audio and video out of sync after exporting sequence

    I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
    My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
    Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
    Video is 61 minutes and 27 sec long
    Audio is 61 minutes and 38 sec long
    That means exported video is shorter than original sequence.
    What could that be ?

    I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
    Good luck!
    Message was edited by: Anthony M Kassir MD

  • Audio and video out of sync after capture from Canon

    Help for a newbie please?  I have a Canon XHA1S and have a problem after capturing HD video.  After capturing a 40 minute clip, the  audio and video are out of sync.  Seems like there is about a 3 second difference.  The entire clip is like that in the source window; I made a couple of quick edits and have the same problem in the program window.  Tried exiting and re-opening PP, but that didn't help.  I'm running PP in CS6 on an iMac 3.4 GHz i7 with 8G of ram.  Thanks!

    I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Maybe you are looking for

  • Apple ID - Why is this so Hard?  "Email in use" why can't I fix?

    My son has an iPhone4s and a new Retina MAcBook we bought him to take to college. He has an Apple ID [email protected]   We can't think of any other apple ID that would've used that @me.com email.  When he tries to set up Messages on either his iPhon

  • Error message when downloading music after purchase

    I've never had a problem downloading songs from itunes before. I just purchased 3 songs and now, it gives me an error message saying that there is an error and the files are corrupted. When I try to "check for purchases", they are there, but will not

  • Error Copy Sender from Payload Sender is Missing in Payload

    Hello, we have a IDOC -> ccBPM -> IDOC scenario on PI7.0 SP12. Since SP12, we have problems in sending the ALEAUD IDOCs from the ccBPM to the R/3 getting the LUW stucked in the queue showing the error "Copy Sender from Payload: Sender Is Missing in P

  • Problem having the cloumn fields in the heading(REP:1317)

    Hi I am having a problem having a column field in the Header.I followed the instructions in the help i.e creating a field and then referencing it with a boiler text(&<field name>).But When I run the report I get the error message "REP-1317: Boilerpla

  • Will ORACLE 9i after few years will be completely replaced with ORACLE 10g

    Will ORACLE 9i after few years will be completely replaced with ORACLE 10g or higher versions. I have worked on Oracle 9i database and i have basic knowledge about Sql commands and i am planning to go for Oracle 10g Certification does it make any dif