Out of Sync when importing rendered sequence

This is the first time I've had this happen and haven't been able to solve the problem yet and haven't found any solutions yet through searching. Using CS5.5, I'm building a show consisting of 7 or 8 already rendered sequences. All seem fine when put together, but one sequence is thrown way out of sync when I import it. The file plays fine otherwise and it isn't until it's imported into premiere that the problem occurs. I've tried re-rendering several times and get the same out of sync problems. And it eventually gets wildly out of sync, not just a few seconds. The properties of the clip are:
Type: MPEG Movie
File Size: 1.5 GB
Image Size: 1920 x 820
Frame Rate: 23.976
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:23:09
Average Data Rate: 6.0 MB / second
Pixel Aspect Ratio: 1.0
This is the same as all the other rendered/imported sequences. I'm at a loss here. Is there anyone who can help steer me to solving this?

Welcome to the forum.
Just so that everyone is on the same page, when you say "rendered," is it safe to assume that you mean that that file was Exported, and then is being Imported into a new Project?
Good luck,
Hunt

Similar Messages

P2 card video out of sync when importing to FCP

Trying to transfer P2 card video (specs on file show 720P60 960x720 59.95 FR with time code 30FPS NDF. P2 plugin is installed and I can view the clips in log and transfer fine. But when importing into FCP the audio is OK but video is slow motion and out of sync. Help what can I do?

Go into the LOG AND TRANSFER preferences, that sprocket menu on the upper right, and uncheck REMOVE PULLDOWN. It really needs to be defaulted to OFF. It causes so many issues.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

Audio is out of sync when importing mp4 into premiere pro CC, how to fix?

Earlier versions had this problem, but while I was working with CS6 it was never an issue. Now it is an issue again. It is not simply the issue of audio lagging, or I could fix that by unlinking and adjusting. The audio is fine in some areas, lagging in others. Sometimes it is the video that is lagging and not the audio. The clips are perfectly fine outside of Pr.
Dimension: 1920 x 1080
Codec: H.264, AAC
Duration: 14:28
Audio Channels: 2
Please help me figure out what is going on? I would hate to have to begin reencoding all of the files of this camera, just because of such a glitch.
Thanks
Tiff

If you provide video file details, someone may be able to help
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Are you 100% sure that your editing sequence matches your video file... such as by using the New Item process?

P2 clips out of sync when imported

Using log/transfer on FCP 7.0.3 to import P2 panasonic 23.98 clips. Has always worked fine BUT this time clips cannot play audio. They play fine in the log/transfer preview, but not as clips in the project.
Any ideas?

Did you overcrank the footage, shooting 24pn over 60?
If so, no sound is recorded

Sound import to 25 fps sequence is always out of sync and need rendering!!!

Anyone know why an aif sound file from Pro Tools imported to 25 fps sequence is always out of sync and needs rendering? It is like FCP is converting it to another freq. when it is 48k already! I do this all the time with NTSC and 23.98 projects, what is up with the 25 frame seq.??
Thanks, Mark

Nick Holmes wrote:
Your audio files must be 48,000 kHz AIFF files if you want to use them in Final Cut Pro.
If the originals are coming from CD's they are 44,100 kHz.
Resample in Soundtrack Pro or convert in QuickTime Player.
Your location says you are in LA. Why are you working in in PAL?
I know that things need to be at 48K this would not matter anyway if it was 44.1 FCP would do the conversion and not make it out of sync in an NTSC Timeline, but a PAL timeline FCP screws with the sound file. The files came from pro Tools, the industry standard should mixing.
I put them through Sound Track Pro and it did not help.
LA is the entertainment center of the world, we send project all over the world.

Audio out of sync when playing HD content

Hey
I've got an issue with the audio gets out of sync when playing some HD content. I've tried to make sure the video is stored on the Apple TV so it can't be the network connection.
I've also tried a full reset of the unit, but still no luck.
But it's all video clips that has this problem. Even though they encoded the same and so on, some videos audio get out of synced and some don't.
Also have a problem with m4v files locking the ATV (and iTunes for that matter), but renaming it to a mp4 file seems to solve it. But if someone has a fix for that as well I'd much appreciate it.
Many thanks in advance,
Jeaz
EDIT: I have tried to use component cables instead of HDMI, but the problem remains. Of course also tested the video on my Mac and no problems. A quick pause and resume usually solves it, but only for a minute or so.
Message was edited by: MrJeaz

What sort of specification is the video content? Is spec too high for AppleTV.
It may be that it's some kind of bug in AppleTV's playback, that the Mac does not exhibit, or an issue with encoding that causes a problem only on AppleTV.
If you are encoding video and using same as source for the frame rate, it may be better in some cases trying explicitly to specify the frame rate required in case automatic frame rate conversion is introducing some kind of timing issue. Test a short clip to see.

Iphoto is blacking out vertical images when importing. how do i fix this?

iphoto is blacking out vertical images when importing. how do i fix this?

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

A portion of audio that is synced in iMovie, is out of sync when burned with iDVD. How can I avoid this?

I'm trying to burn a simple movie, using iMovie and finishing in iDVD. A portion of the audio is out of sync when burned, despite it being in sync in iMovie. Any suggestions?
Thanks.

Hi
Try to - Save as a DiskImage - then test this with Apple DVD-tool.
Does this play OK - burn this DiskImage by using Disk Util tool.
Set down burn speed to x2 or 4
Yours Bengt W

Why is the audio on my video getting out of sync when it is imported into itunes?

Hello,
I have videos in the MP4 Format, and have imported them into itunes. However, during playback in itunes, the audio gets more and more out of sync as the video plays. By the end of the film the audio can be 5-6 seconds out!
What's strange is that the source file, played with quicktime or Windows media player, is fine and works perfectly.
Why is the audio stretched once it is imported?
Thanks,
James

I have the same problem.
Motherboard: Gigabyte GA-MA785GPMT-UD2H
Chipset:
North Bridge: AMD 785G
South Bridge: AMD SB710
Video: Integrated ATI Radeon HD 4200
HDMI Audio through the HDMI port out to the TV.
Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device though, because it still appears in Windows even if I disable the Audio device in BIOS).
Latest iTunes and drivers installed.
I have already tried all sugestions about matching Windows Audio settings to iTunes settings (bit depth, frequency rate).
Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

Audio Drifting Out Of Synce when Exporting to Quicktime

Using FCS2 and all material is HDV 1080i60 with audio 48k. Everything in my sequence plays and renders fine and is in sync. When I export to quicktime movie using current settings the sound goes slowly out of sync so that by the end of the project the sync is horrible and the actual project is short 11 or so frames??
Any suggestions?? I have always done this in the past with no problems but since switching to FCS2 I have had nothing but problems when this comes up.

I had a similar problem when I exported a 20 minute video to an .flv Playback looked and sounded fine but the .flv file direct out of Final Cut was out of sync with audio. I finally used the Render Manager under tools to remove all renders for that sequence and then just re-rendered in one shot. That export was clean. I had tried to break renders and re-render them but it didn't work, but the Render Manager seemed to fix what ever caused it. I haven't noticed again since on any other projects. Good Luck.
Rich-

Video source sync when imported in fcp loses sync

Hi
I have an issue I can't figure out:
When played in Quicktime player (format hdv60i) the video and audio are in sync but when imported in Final Cut Pro 7, they lose their sync.
I made my sequence to the exact specs as the original movie file and tried different settings but it is always out of sync.
Another thing, in FCP 7 the movie file does not want to play until the end but when I tried to make a Pro-Res 422 LT version, the out of sync issue remain but now the file play from start to finish.
I am speechless...
Anyone help???

Hi,
I made my sequence to the exact specs as the original movie file
What are the specs of the original file please.
DM

Slideshow audio gets out of sync when exported to iDvd

I made a large slideshow for a 40th anniversary party. It has 244 images & 7 songs. It is 29 min 54 seconds long. When I view the slideshow in iPhoto it works fine & the last image ends right at the end of the last song.
When I exported it to iDvd, the audio gets out of sync with the video. By the end of the first song, the video is about 2 seconds ahead. By the end of the last image, the last song is cut of by about 30 to 45 seconds. I tried exporting the slideshow directly to iDvd. I also exported it as a large movie & it did the same thing.
I'm using a 17" 1.67ghz powerbook with 1.5 gigs of ram.
I'm using OS 10.4.2.
I'm using iPhoto 5.0.4
I'm using iDvd 5.0.1
The images are scanned tiffs. I also have jpegs that I shot with my canon eos digital rebel xt.
Anybody have any ideas or work-arounds?

I suggest you either use iDVD to create two slideshows or use iMovie to get all 277 images and the 8 audio tracks into one slideshow. If you use iMovie after you get the slideshow/movie put together and completed quit iMovie. Then go into the iMovie project package (Control-click and select Show Package Contents). The find your movie in the Shared Movies folder and drag it into an open iDVD menu. This allows iDVD to to the rendering of the stills and give you a sharper image. That movie file you're dragging is a reference movie so leave it where it is and just drag it into iDVD's window.
If you can live with two separate slideshow (consider it a potty break between the two) and you don't have or need the Ken Burns effect, you can get excellent results by building the slideshows with iDVD from imported stills. The sync to audio in this method works as advertised. I like to add a blank slide at the end of the slideshow so the music fades out during a blank, black slide.
OT

Audio and video out of sync after import

I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
Any ideas?

Thanks. Here's the output:
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 1.05 GiB
Duration : 51mn 20s
Overall bit rate mode : Variable
Overall bit rate : 2 937 Kbps
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Writing application : HandBrake 0.10.1 2015030800
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 51mn 20s
Bit rate : 2 606 Kbps
Width : 720 pixels
Height : 478 pixels
Display aspect ratio : 4:3
Frame rate mode : Variable
Frame rate : 24.145 fps
Minimum frame rate : 0.167 fps
Maximum frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.314
Stream size : 957 MiB (89%)
Writing library : x264 core 142 r2479 dd79a61
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio #1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 51mn 20s
Bit rate mode : Variable
Bit rate : 132 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 47.9 MiB (4%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : ac-3
Duration : 51mn 20s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 70.5 MiB (7%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Menu
ID : 4
Codec ID : text
Duration : 51mn 20s
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Bit rate mode : CBR
00:00:00.000 : Chapter 2
00:01:50.877 : Chapter 3
00:03:59.218 : Chapter 4
00:13:26.285 : Chapter 5
00:20:57.685 : Chapter 6
00:32:58.489 : Chapter 7
00:39:14.031 : Chapter 8
00:50:51.611 : Chapter 9

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Out of Sync when importing rendered sequence

Similar Messages

Maybe you are looking for