Out of sync

Dear Members
I have the following scenario
One Primary database ( A )
one Physical standby database (B)
one logical standby database for reporting purpose ( C)
We use dataguard for this setup. For the physical standby database we apply redolog and in SYNC
For the logical standby database we use SQL APPLY by reading the redo
We have the following issue
Once the Primary database (A) become Physical standby (B) & Physical database ( B) become Primary (A) (Failover) it works fine
But the logical standby database (C) having a issue with SCN NO with NEW Primary database ( WHICH IS LAST TIME Logical stand by database)
How to fix this sync issue
Regards
Edited by: Repos on Mar 14, 2012 4:21 AM

Hello Bellman
The oracle version is oracle 11g release 1
REgards

Similar Messages

Audio out of sync

I have 2 Xl2s. Both running at the same time taping a performance. One is using tape, the other a HD recorder. When I do the capture of both streams, I am unable to sync the audio and video. Something I have done many times before with other cameras. The offending capture is the one that came from tape.
I am shooting 60i, 16:9, standard 16 bit audio, everything default. The weird thing is is that the audio is out of sync for its own video clip! And it seems to get futher out of sync the farther in the clip I play.
I imported as DV 3x2 anamorphic using a Sony DSR 11 deck.
Is my camera tweaked?

Read the bit at the end about unlocked audio.
http://www.cyberfilmschool.com/learn/article_detail.aspx?id=96
This article claims FCP has a switch to deal with the 48 KHz vs 48.009 KHz. I don't know it.
http://www.chip-india.com/dcquery.php?qid=9360
and more good information here...
http://www.geniusdv.com/avid-fcp//read.php?1,1737,2024
There are kluge work arounds, but they are not ideal. When I have to deal with this stuff I keep my captures short, which doesn't seem to be an option for you.
Another trick is the change the speed of the audio very slightly to compensate for the drift.
I hope all this helps. I was burned by this with a project four years ago, so I know how frustrating it is.
Tom

Audio out of sync when playing HD content

Hey
I've got an issue with the audio gets out of sync when playing some HD content. I've tried to make sure the video is stored on the Apple TV so it can't be the network connection.
I've also tried a full reset of the unit, but still no luck.
But it's all video clips that has this problem. Even though they encoded the same and so on, some videos audio get out of synced and some don't.
Also have a problem with m4v files locking the ATV (and iTunes for that matter), but renaming it to a mp4 file seems to solve it. But if someone has a fix for that as well I'd much appreciate it.
Many thanks in advance,
Jeaz
EDIT: I have tried to use component cables instead of HDMI, but the problem remains. Of course also tested the video on my Mac and no problems. A quick pause and resume usually solves it, but only for a minute or so.
Message was edited by: MrJeaz

What sort of specification is the video content? Is spec too high for AppleTV.
It may be that it's some kind of bug in AppleTV's playback, that the Mac does not exhibit, or an issue with encoding that causes a problem only on AppleTV.
If you are encoding video and using same as source for the frame rate, it may be better in some cases trying explicitly to specify the frame rate required in case automatic frame rate conversion is introducing some kind of timing issue. Test a short clip to see.

MPEG4 video from imovie is sluggish and audio out of sync

Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min long

OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt

Audio out of sync with video in timeline SOLVED

The audio and video are in sync when playing .MP4 video (but may apply to other video files) in the Premiere Pro viewer and Windows Media Player and VLC however, as soon as you drag the clip into the timeline it goes out of sync. Since it took so much time for me to figure out how to get around this problem I wanted to share this, ESPECIALLY For all the people who are semi Adobe Premiere noobs (with no disrespect, I fall into this category) at this and google isn't helping to figure out why this is happening I'll give you the easy fix. For all the people in this forum who are going to ask the detailed information, codecs, etc. I'll give that as well.
FOR THE NOOBS:
All the information I've read online all seems to point that the timeline sometimes doesn't like certain audio contained in the video. It conforms incorrectly, etc. Personally, it doesn't make any sense to me. Forget all that.. you just want to get on with your project.. to heck with the details, you're tired of googling. Here's the solution I found. Extracting the audio from the problematic video file outside of Adobe Premiere. I use avconv, because it's free, open source, and you won't lose audio quality. Then linking that audio with the video in Adobe Premiere.
First if you are using a windows 32 bit computer download avconv here: http://win32.libav.org/win32/
If you are using a windows 64 bit computer download avconv here: http://win32.libav.org/win64/
go to the bottom of the page and click on the newest date version. DISCLAIMER: This is open source software. It's free. I didn't make it so I'm not trying to sell you anything.
It's a zip file so you will need to use winzip or 7zip to uncompress it. You can't just click on the installer. You can uncompress and save the program wherever you want on your computer. Say you didn't pay attention and you automatically saved it in the default spot in your downloads folder. The place you'd find the program might look like this if you're on a 64 bit computer:
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 If you're on a 32 bit computer it will probably look like this C:\Users\youruseraccountname\Downloads\libav-9.7-win32
Just make sure you know where it is located and copy it down in notepad. If you can't find it, do a search on your C: drive for avconv .For this forum thread we will assume you have saved avconv in the downloads folder and you're on a 64 bit computer.
Click on the Windows key on your keyboard. Type in Run and then press enter. Type in CMD and press enter. This will open up windows command line. Don't worry, it's not as scary as you think.
Now hold down the Windows key and press E. This will open up a windows explorer window for you to find the video file you are having issues with in Adobe Premiere. Once you have found the file, copy the location of the file. So.. if your file was here: c:\Users\youruseraccount\videos\yourvideo.mp4 you would see that at the top of the windows explorer in what's called the address bar. Copy that. Paste it into your notepad.
Now switch back to the windows command line window. Now I'm going to have you type a command into the windows command line but before you do I want you to understand how to type it in.
#1. Do you know the exact path (location on your computer) where you installed avconv?
#2. Did you copy the exact path (location on your computer) where you have your video file?
If so.. type in the command below but change it with the information you have above
C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe -i "c:\Users\youruseraccount\videos\yourvideo.mp4" -vn -qscale 1 "c:\Users\youruseraccount\videos\yourvideo.wav"
So let's break it down so you understand and help troubleshoot any issues you may have.
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 this is the example location we said we installed avconv. The actual avconv.exe program is located inside that folder so the full path would be this: C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe
-i just tells avconv what the input file is.
"c:\Users\youruseraccount\videos\yourvideo.mp4" is the path (location on your computer) where your video file is.
-vn just tells avconv you only want to extract audio from the video
-qscale 1 just tells avconv you want the best quality
"c:\Users\youruseraccount\videos\yourvideo.wav" just tells avconv the path (location on your computer) and the name you want to give the audio file you're taking from the video. This will save the audio wav file to the path (location on your computer) where the problematic video file is saved.
Once you have the audio wav file import it into Adobe Premiere. In the timeline, unlink the audio from the mp4 (or whatever video file you have). Highlight the now unlinked mp4 audio and delete the audio. Then bring your audio wav file you created using avconv and bring it onto the timeline at the start of the video. Now link it. Hopefully that did the trick.
If you have any questions regarding the command line or installing avconv please feel free to comment and ask. I'm pretty good at windows command line and can probably help identify what the issue is.
FOR THE INFORMED PREMIERE PRO USERS:
Here are the details of the problematic video file that I had this issue with. This is from avconv:
Metadata:
    major_brand     : mp42
    minor_version   : 1
    compatible_brands: mp42mp41
    creation_time   : 2013-05-12 11:45:32
Duration: 01:58:28.24, start: 0.000000, bitrate: 3256 kb/s
    Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720, 2997 kb/s, 25 fps, 25 tbr, 25 tbn
    Metadata:
      creation_time   : 2013-05-12 11:45:32
    Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, fltp, 256 kb/s
    Metadata:
      creation_time   : 2013-05-12 11:45:32
I don't know the type make/model video camera that was used or if it was converted before being given to me. This is just what i had to work with and the solution I found to fix it.

if you are using a windows 32 bit computer
Then you won't be using anything above Premiere Pro CS4, and this thread would be in the wrong section.
By the way, the process is significantly easier using something like Xvid4PSP, which can strip out the audio using a fairly easy to understand GUI, as wel as convert those oddball videos into something PP can handle.
http://www.videohelp.com/tools/XviD4PSP (Use version 5.)

Jabber for Windows and Unity Connection Voice mail out of sync

Hello all,
Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
Anyway has anyone had similar issues? If so is there a fix?

Symptom:
User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
Conditions:
User does not sign out from jabber for more than 24 hours since last log on.
Workaround:
Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
Voicemail does not sync if Jabber left logged in for more than 24 hours
CSCuo46274
Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

Out of sync audio when trying to capture from digital 8 camera to quicktime, please help

Just trying to capture hi 8 tapes using a sony digital 8 dcr-trv355e pal into quicktime;
great clear video but audio becomes out of sync like a bad kungfu movie,
contacted apple they tried to help, but they dont really understand issue
there are lots of people out there that are trying to digitise old analog video;
I have fcpx and imovie they both play the old video via the digital 8 camera but cannot capture;
that is why using quicktime; thanks!!

Yes i think its something to do ith the fact its a wmv file, when i use mpeg footage it exports fine.
basically, no matter how long the video, the video is out of sync...its weird
i've decided the best thing to do is leave quicktime and export using windows media instead, that seems to give me a better looking picture witha small file size anyway
thanks for your help though!

Flash Player doesn't play smoothly and out of sync in full screen

Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D:    0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768)   Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes   WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No    I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytes

Would you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

10.6 iCal week view and mini calendar are out of sync-how to fix?

How does one re-establish "sync" between the large window week view and the small mini calendar month view displayed on the lower left side? Mine is out of sync by a month. Thanks!

Are they off by always the same amount of time or they drift apart over time?
If the former, you may try a quick adjustment, though it is a manual affair. Control-click on the clip in the browser, choose "Open in Timeline" and try moving the audio to match.
If I remember correctly, DV tape audio could be recorded in 32KHz or 48KHz. The latter is the one that should be used, always.
Maybe this one was recorded at 32KHz?

Video out of sync in Final Cut Express... but in sync everywhere else!

'm working on making one video that is composed of two camera angles of the same thing. So, I have two video tracks in Final Cut Express, one for the side view, and one for the main view. Both videos are Quicktime Movies (.mov extension).
Here are the file details:
Main Cam: duration - 1hr 26min 46sec // file size - 5.74gb
Side Cam: duration - 1hr 29min 18sec // file size - 5.63gb
[the side cam video is a little longer because I started filming with that camera a little bit before the main cam and stopped the filming a little earlier]
Now, here's the problem. Both videos are in my Final Cut Express project. The Main Cam video runs fine. But the Side Cam video's video is out of sync with the audio by a lot (somewhere between 2 and 6 full seconds). Normally I would think that something had happened during the filming, but here's the odd thing: the Side Cam video plays perfectly in sync out of Final Cut Express.
If I open it in Quicktime, or even in iMovie, the audio and video are perfectly in sync for the entirely of the video. But when I import it into FCE and watch it there, whether it's in the timeline, in the viewer, rendered, or unrendered (I've tried them all), it's horribly out of sync.
So, the video plays fine and in sync everwhere except for in the Final Cut Express program. The Main Cam video, which has a very similar duration and file size and which is the same file type, plays perfectly even in FCE. The only problem is the Side Cam, and I can't figure out why this is, or how to fix it.
Another thing: these videos were not captured from a camera into Final Cut. I already have the video files on the computer, and as I've said, the audio is fine there. To get them into FCE, I use file -> import.
Also, if anyone has suggestions on how to fix this, could you provide directions of some sort? I'm fairly new to Final Cut.
Any advice would be greatly, greatly appreciated.
Thank you so much in advance!

Hi(Bonjour)!
Does both camcorders was set to 16-48 khz audio?
One way to synch audio that drifting from video (or from anoter audio lenght) is to set precisely 2 markers (one near the beginning, another near the end) in the correct lenght video track. Try to find spots where you can hear and see a common reference. The result of the workaround will put a corrected audios between those points only.
Now note the duration between those 2 markers in video track.
*Unlink the video/audio clip with the wrong duration.*
Select the drifting audio and put the 2 markers at the intended reference points.
The duration should be less or more than the video.
Use the blade tool to cut the wrong lenght audio at markers.
The tips is to set a new duration for this portion with the set speed command.
With this +new duration+, align the in point of audio with the first video marker. The out point of audio should be aligned with the second video marker.
Now the audio should match the video lenght and should be in synch.
Michel Boissonneault

After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore

After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore
Please help

Well, I was able to get it to sync by opening iTunes first, and THEN connecting the iPhone. And it does sync but still will not sync with iPhoto. I also unchecked and rechecked the option to "Open iTunes automatically when this iPhone is connected" and now iTunes opens and syncs automatically. But tried the same thing with iPhoto to no avail.
Any ideas for iPhoto syncing?
Dukes, since you are running on Windows you might open a new discussion, or try this solution someone else posted that pertains to Windows: http://support.apple.com/kb/TS1538

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.

How do I sync my AIFF audio to my NTSC 29.97fps video? It's out of sync.

How do I sync my AIFF audio to my NTSC 29.97fps video? It's out of sync.
If searched the forums looking for an easy fix. It has to be a common problem with a simple solution, yes?

Surely you have a backup of your old laptop? If you don't, follow this tip from wjosten... https://discussions.apple.com/docs/DOC-3141
Then, purchase an external hardrive and backup your new computer.

I rented a movie on iTunes and the sound is out of sync and the movie has now been removed?

i rented a movie and the sound was out of sync i reported it and got no respone and now the movie has been removed, help please??

Report it again using this link and ask for a credit.

Sony HDR-HC3 1080i imports out of sync to iMovie

My old DV camcorder imported into iMovie 6.0.2 just fine. Have just bought the new SONY HDR-HC3E HDV handycam - component set to 1080i/576i and HDV/DV converter set to off.
Created new iMovie project and selected video format HD 1080i. iMovie sees the camera okay but when i press play control or import control, iMovie tells me it is previewing or importing iMovie content at 1/2 or 3/4 speed. Picture in iMovie window is clearly moving slower than picture on camcorder screen. When i press pause or stop and review clip that has been imported into iMovie it plays back with the sound out of sync. Can anyone suggest what I'm doing wrong?
Thanks
Kosmo
Powerbook G4 1.67GHz Mac OS X (10.4.7) 1.5GB DDR SDRAM

Hi kosmo
Most obvious thought.
- is Your Camera set to 12-bit sound or does it have LP/EP mode (long/extended) that
records more minutes on a standard tape than normal play.
- should be 16-bit sound and SP (standard play) mode.
If this is relevant to Your situation !
Yours Bengt W

Out of sync

Similar Messages

Maybe you are looking for