Out of the blue my iPhone 4S home button and notification centre has stopped working.
Out of the blue my iPhone 4S home button and notification centre has stopped working. I used the phone and switched it off. The next time I turned it on they weren’t working. The phone wasn’t dropped on banged around. – Any Ideas, Anyone??
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW. Have ALL of these steps been tried?
If you've been through ALL these steps and still have problems, you'll need to bring your phone into Apple for evaluation.
Similar Messages
-
When it fails it says " A problem caused the program to stop working correctly."
I tried to update Creative Cloud and update my inDesign to see if they would make it open, but that didn't work.Some ideas/questions:
Minimum PC specifications met?
If Windows, are there other system problems to be solved? Topic: maintenance center
Installation was successful, without warnings?
Is any anti-virus software installed and probably interfering?
Try to create a new user and try there.
If Windows: switch off any non-Windows background software temporarily and try again. If it works then, enable them again step by step to find the culprit. -
HT1349 my home button on my 3gs has stopped working how do i get it working again
how do i get my home button working again
What do you mean by not working?
Does not respond to touch but iPod was not damaged?
Is screen cracked and not working? -
My Iphone 5 home button keeps pressing itself but stops if put pressure on the bottom of the screen on each side of the home button, i have noticed that there is a screw missing on the right side of the lightning port could this be the issue??
If you are still under warranty, contact Apple to get it serviced. You can also visit an Apple Store or Authorized Apple Service Provider to get it looked at.
iPhone - Contact Support - Apple Support -
My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.
Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone. -
There is a small white light in the retina display on my ipad 3. Is this a dead pixel/light leak and how do I fix it? (Located at the bottom left side between home button and left corner)
Maybe this will show up better in green.
-
The sound on all of my game apps and my alerts has stopped working. Still works for Netflix, Hulu, YouTube... Anything video related. Anyone else have this problem or know what I should do to fix it?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
CS4 won't start up on my new computer. The error message I get is "Licensing for this product has stopped working." Both the old and new computer are MACs and the error code I get is 150:30. It says to restart the computer or open another application in the suite, but neither helps. It says if nothing helps to contact Adobe support, but this is the only way I'm given to contact adobe support. Can I really not use my purchased software on my new computer? What do I do to activate the license on the new computer?
"Licensing For This Product Has Stopped Working" - Help
-
can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....
Ok, I am having literally identical issues with Marathon Max.
I try to connect, and it says, "Itunes could not connect to the itunes store, Make sure your network connection is active and try again." I have contacted my ISP, and they ran a full check, and sayed I should be able to connect to pretty much all websites. I did the whole "ipconfig" thing and that was no help. I also tried the "msconfig" thing, and it sayed it did not recognize it as any kind of command, internal or external command or operable program or batch file. Whats strange is I can connect from another computer just fine, but when offered to upgrade itunes I declined for fear of the same thing happpening. I am tempted to just upgrade it and thus demonstrate that itunes has a flaw in their upgrade. I will save this computers diagnostics, and the other one's too, before and after the upgrade. I look forward to sending more feedback regarding this matter -
OOut of the blue my iPhone 5 gave me this message, "No SIM detected." I cannot call or text non iPhone users.
Start here: If you see 'No SIM' alert on iPhone - Apple Support
-
The last several days I have not been able to access the dial pad. When I go to phone a pop up appears that says "unfortunatly contacts has stopped working." To remove the pop up you have to hit 'ok', the it goes back to the home screen. This also happens when I go to contacts.
You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379 -
New iPad tethered to iPhone 4 both on iOS 6, iMessage has stopped working.
Since updating to iOS 6 on both devices, iMessage has stopped working on the iPad when tethered.
It still works on the home wifi, but the progress bar goes to about 95% done before a send failure message comes up.
I haven't found any other apps not working over the tethered 3G network
iMessage is turned on and works elsewhere.Hello square_one,
Thanks for using Apple Support Communities.
Please follow the article linked to below to ensure your Messages notifications are configured correctly.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Take care,
Alex H. -
I have an iPhone 5, I got it on the 10th May last year and the charger has stopped working, am I entitled to a replacement charger under my 12 month warranty?
All package contents are included with the iPhone's warranty including the cable and power adapter/charger.
-
for a few weeks i have not been able to access the itunes store from the itunes on my laptop. every time i click on it it tells me it cannot access the store...not sure why. and says this: ITUNES HAS STOPPED WORKING a problem caused the program to stop working correctly. windows will close the program and notify if a solution is available.
I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
So I opened my whole iPhone 4 up and I was trying to replace the home button as it got worn out so when I tried taking the ribbon off, I pulled a bit too hard and then the whole thing just broke so now I cant even connect the ribbon anymore. So is there a way that I could replace it or not?
No one here works for or represents Apple, thus no one here can definitively answer your question. Out of warranty replacements require the phone, you're replacing, be in one piece. Generally, when you perform surgery yourself, you void the ability to take advantage of an out of warranty replacement.
Put everything back together, make an appointment at an Apple store & hope for the best.
Good luck.
Maybe you are looking for
-
Field Text is a required field for G/L account ZA01 476900
Dear SAP Guru's, When I am doing the MIGO for the purchase order from the Sales order purchase requisition. I am Getting the error. Field Text is a required field for G/L account ZA01 476900 Where can i define the feild text for G/L Accounts. regards
-
Problem in Printing jtable swing component using dot martix Epson printer
Hello, I am devoloping desktop aplication using swing.In which i want to prit jtable on paper using dot matrix printer. It works well if i am not chnging the font.But if i changed the font (to my local language or any any other language) the pri
-
Hi All, I am a abap technical consultant and i am new to travel management. Now i need to work in Travel Management and on FI module. At this stage i dont have knowledge in Travel Management as well as FI... So guys can anybody guide me like what ar
-
Why am I having imbedded video playback problems in Lion?
Hello all, I'm been having problems viewing web videos on my 2011 MBPro 13'' w/ OS X Lion. Any time of web video I have normal sound by the video frames get all jumpy, almost like its less than 1fps. The only web videos that do not have this problem
-
Too slow loading certain sites, how can I make faster
loading certain sites, it takes for ever, would like to make run faster, best wishes