Out of the blue some of my event folders now fail to show the thumbnails, just empty frames? whats up with that?

for some reason, some of my event folders are blank on the events page and the event folders no longer show the thumbnails, just hash-mark empty frames. This is just a few events all of a sudden out of many events. Any idea whats going on and how to fix it? Thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Similar Messages

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

That's a comment in the file. It has no effect at all.

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output?

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?

wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!

In the Alarm & Event Query VI how to show the alarm data

In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

Hi,
Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?

I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?

Which magnifier tool are you referring to? If you double-tap with 3 fingers it should disable zoom. Then you can go into Setttings>Accessibility>Zoom and turn it off.

When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

All fixed! It was TeamViewer that was causing the problem.

I made an iMovie project with a bunch of stills and when I came back later today they had turned black like they weren't there. What's with that? How's the best way to fix it?

I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
Like this:
When I play them they're black as well.
Normal Still:
"Missing" Still:
What's with that? What's the best way to fix it?
Thanks.

Hi
Magic solution - NO
Some thoughts - YES
Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
Trouble-shooting guide
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

IPhoto Event Folders now have weird encrypted looking titles?

Many of my iPhoto (also Aperture of course) event folders now have these encrypted looking folder titles and some may contain only one or two pictures.
There's a massive amount of them and I don't understand what created this mess? I have used some iphoto duplicate file location software just in case it may have been part of the problem.
Screenshot example enclosed.

I've run tests on the Gemini app and it found all of the duplicates in my test library except those HDR and normal files taken by an iPhone shooting in the HDR mode.
However, I wasn't able to test it's removal capability to see if it did it all within iPhoto and didn't damage the library structure. You can answer that.
OT

Advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

I am after some advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

If you have a dropbox account, there's a free app (probably more) that syncs photos to your dropbox account - picbox.
There's also PhotoSync that syncs photos to/from a number of different services and devices.

How do I get my purchased movies from iTunes to show in my Library without storing all the GBs on my hard drive? [I want to show the Cloud Purchases.]

Hey Hey!
Running OSX 10.9.4 and iTunes 11.3
I am pretty sure that this has been addressed somewhere, but I could not find it - so thanks up front!!!
How do I get my purchased movies from iTunes to show in my iTunes Library without storing all the GBs on my hard drive? I want to show the Cloud Purchases without having hundreds of GBs taking up my HD space.
Thanks!

Deborah,
You cannot import contacts from your Nano to your PC via iTunes. The syncing process is only one way. However, if you enable disk mode on your iPod, open it up in a Windows Explorer window, you should see a Contacts folder. From there you can copy them back over to your PC.
Even though this article is talking about adding contacts to the PC, it should walk you through some of the steps mentioned above.
http://support.apple.com/kb/HT2419?viewlocale=en_US
B-rock

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

Oaky, at least we got that far. Next step is to determine if all those "numbers" are really numbers. Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number. Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
Here are some that will remain as strings:
+123
123 with a space after it.
.123

I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Out of the blue some of my event folders now fail to show the thumbnails, just empty frames? whats up with that?

Similar Messages

Maybe you are looking for