Out-of-the-box problem with L55-A5284 Laptop

I just purchased a Satellite Laptop L55-A5284, P/N PSKLAU-00H004.
I started setting it up with user name, wireless network to use, etc and I finally got to the Space Needle screen with date and time displayed. When I clicked on that screen, it went to the Microsoft login screen. However, once I put in my password, it then went to a blank screen and froze. I tried cycling power off/on and it came back to the same screen with the same results. I do not know where to go from here so any suggestions would be appreciated. This is also my first experience with Windows 8. Thanks
Solved!
Go to Solution.

Thanks for the replies. I finally got through to the Toshiba help line and they were able to help me reset the system by removing all power and depressing the power button for about 15 seconds before powering up again.

Similar Messages

How can I replace the out of the box photos with my own when music is playing?

How can I replace the out of the box photos with my own when music is playing?

Welcome to the Apple Community.
Select any photos you want to share with the Apple TV using the iTunes advanced menu (using iPhoto is the better option but a folder will work). Once all the photos you want are shared, go to settings > screensaver on the Apple TV and choose which of those shared photos you want to use with your screensaver.

Nokia Lumia 1520 out-of-the-box problem

I just got the Nokia Lumia 1520 from Germany and I took it out of the box all good and pretty, but when then I go and charge it since it didn't turn on at first (I have this british charger and a european adapter) and put it in the phone. I left it for a while to charge since the windows start button started flashing and now when I turn it on, it shows the Nokia start screen, then it shows that it's charging and then there comes a blue screen that flashes and it vibrates after that. Again the Nokia start screen shows and the blue screen flashes again, vibrates and Nokia screen again and so it goes endlessly!
I have never gotten it to start it just flashes the blue screen and turns off again
See the video:
https://www.youtube.com/watch?v=b4eOmqirqRk&feature=youtu.be
WHAT DO I DO HELP!

Sounds to me like the charger you are using is not powerful enough. Are you using the charger that came with the phone? You mentioned adaptors etc so thought you may be charging with another charger. You could also try charging with high output usb chargers, typically ones for tablets.

Out of the box workflow failed on start when started programatically

I have an approval workflow (out of the box) associated with a list and need to start it for some items programmatically when some conditions are met.
My application runs under an account which is a farm admin. I do have another user dedicated to start workflows. I'm using the code below but it always results in a 'failed on start' with these errors
2/27/2015 4:54 PM
Workflow Cancelled
System
Account
Workflow 'WorkflowName' was canceled by System Account.
2/27/2015 4:54 PM
Error
System
Account
'WorkflowName' failed to start.
Code is :
SPUserToken userToken = null;
using (SPSite site = new SPSite("SiteName"))
using (SPWeb web = site.OpenWeb())
site.AllowUnsafeUpdates = true;
web.AllowUnsafeUpdates = true;
userToken = web.AllUsers["WorkflowAccount"].UserToken;
site.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
using (SPSite site = new SPSite("SiteName", userToken))
using (SPWeb web = site.OpenWeb())
site.AllowUnsafeUpdates = true;
web.AllowUnsafeUpdates = true;
SPWorkflowManager workflowManager = web.Site.WorkflowManager;
SPList list = web.Lists["LibName"];
SPListItem item = list.Items[1];
SPWorkflowAssociationCollection associationCollection = list.WorkflowAssociations;
foreach (SPWorkflowAssociation association in associationCollection)
if (association.Name == "WorkflowName")
association.AutoStartChange = true;
association.AutoStartCreate = false;
association.AssociationData = string.Empty;
site.WorkflowManager.StartWorkflow(item, association, association.AssociationData);
break;
site.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
Is there any requirement on who can create the workflow? I can control who creates if I absolutely have to
Any help/clues/directions appreciated.

Hi LNFei,
To troubleshooting the issue, I recommend to follow the steps as below:
1.Start the workflow manually to check whether it works.
2.Use another account not System Account to check whether it works.
3.Publish the workflow as a different user (rather than System Account).
4.Deactivate and Reactive the “Workflow” Feature.
5.Check other workflows on other lists/libraries could work well.
6.Create a simple workflow having only one activity which will log history only, check if it works well.
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

Problems with the out-of-the-box Worldnews portlet

Hi all,
I'm having problems when I try to add the out-of-the-box portlet called "World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the world news to
my portal. It is strange because the portlet look ok at first but when I try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Thanks! That was a great help :-)
"Peter Laird" <[email protected]> wrote:
>
Stig,
This is a known bug without a resolution currently. It is being tracked
internally
as CR064184 and is targeted to be fixed for 4.0 SP2.
Sorry!
PJL
"Stig Boye Andersen Aatland" <[email protected]> wrote:
This is the stacktrace hopefulle this will help. If not thanks anyway!
weblogic.xml.jaxp.RegistrySAXTransformerFactory
java.lang.ClassCastException: weblogic.xml.jaxp.RegistrySAXTransformerFactory
at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1509)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:800)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:376)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean.process(MoreoverNewsPCBean.java:133)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean_79tma7_EOImpl.process(MoreoverNewsPCBean_79tma7_EOImpl.java:37)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl.executePipeline(PipelineExecutorImpl.java:299)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl_x8bn7v_EOImpl.executePipeline(PipelineExecutorImpl_x8bn7v_EOImpl.java:37)
at com.bea.p13n.appflow.webflow.internal.PipelineProcessor.process(PipelineProcessor.java:157)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:120)
at com.bea.portal.appflow.PortalAppflowHelper.invokePortletWebflow(PortalAppflowHelper.java:185)
at com.bea.portal.appflow.processor.PortletEventProcessor.process(PortletEventProcessor.java:97)
at com.bea.portal.appflow.processor.AbstractPortalProcessor.process(AbstractPortalProcessor.java:86)
at com.bea.p13n.appflow.webflow.internal.IPProcessor.process(IPProcessor.java:106)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:124)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doPost(WebflowServlet.java:213)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2459)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"Daniel Selman" <[email protected]> wrote:
Please post the exception stack trace.
Thanks,
Daniel Selman
"Stig Boye Andersen" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I'm having problems when I try to add the out-of-the-box portlet
called
"World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the
world
news to
my portal. It is strange because the portlet look ok at first but
when
I
try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Help Please - on a VC that works out of the box with MAC before I sellup

I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
3, I wanted to update my home hardware, which was 3 years old.
4, The accountant said I hadn’t spent enough on IT last year.
5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
Started by buying
iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
MacBook Pro 2.4 with 4GB ram (for out and about working)
iPHONE 16GB (which is great)
VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
So why don’t it work?
*At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
<edited by host>
I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
Thanking anyone in anticipation for some meaning advise and help.
Regards
Alan

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

Can I use my iPhone 6 out of the box to take photos, before syncing it with my computer?

I will be receiving a new iPhone 6 at the beginning an upcoming trip and would like to use the great camera on it to take photos. The problem is I won't have my computer with me during this trip. Will I be able to use my iPhone right out of the box to take photos, and when I sync my iPhone for the first time will I risk losing those photos? Thank you for the help.

Will I be able to use my iPhone right out of the box to take photos
Once you have activated the iPhone with a sim inserted
when I sync my iPhone for the first time will I risk losing those photos?
Yes unless you transfer Photos off iOPS device to your PC/Mac
see this
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Which Linux Distro Works Out of the Box With the iMac late 2009 (11,1)?

Hi. I use all 3 OSes because the other two OSes have tool and games that are not yet in OS X; best of both worlds. Win 8 on Bootcamp is nice for games and utilities but I'm installing Linux too on a separate external drive. I've tried a lot of Linux distros but they all have the bug that prevents ths iMac 4850 mobility GPU to work (you need a second monitor to solve it which I don't have the space for and I only use Linux every so often) but have you tried a Linux distro Live CD/DVD that works flawless on this Mac without editing commands in Linux's GRUB console on Linux bootup?
If there's no distro that works out of the box, what's the closest distro that may only need a few adjustments on its boot menu (GUI preferably not console commands).
But if there's a distro, what's the distro name and exact version (link to download it too if it's alright with you)?
Thank you in advance.
God bless.

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

String problem using B1ITM2B1ITM out of the box B1iSN 8.8 scenario

Hi all,
    I am testing the out of the box scenario for Item syncronization (B1 to B1)
It works fine except for one thing:
    If the ItemName contains xml special characters like < > & in the xml message they are correctly converted into xml rappresentation < > amp; but when the message is sent to the destination company doesn't happen a reconversion to the readable rappresentation.
What do I have to do to have the exact rappresentation even in the destination company? Should i have to put translation tags into the xsl transformation? If so which they are?
Thank you all in advance, Regards Luca.

Solved...
    I found a bug in the conversion to xml format:
>   is uncorrectly replaced with &gt;
so I have replaced:
<ItemName>
     <xsl:value-of select="BO/Items/row/ItemName"></xsl:value-of>
</ItemName>
with:
<xsl:variable name="itname">
        <xsl:call-template name="b1ilib.strgReplace">
             <xsl:with-param name="subs"><</xsl:with-param>
          <xsl:with-param name="var">&lt;</xsl:with-param>
           <xsl:with-param name="wstrg" select="BO/Items/row/ItemName"></xsl:with-param>
     </xsl:call-template>
</xsl:variable>
<ItemName>
     <xsl:call-template name="b1ilib.strgReplace">
            <xsl:with-param name="subs">></xsl:with-param>
            <xsl:with-param name="var">&gt;</xsl:with-param>
            <xsl:with-param name="wstrg" select="$itname"></xsl:with-param>
     </xsl:call-template>
</ItemName>
A similar problem has been detected here:
B1iSN: Tips, tricks and important topics

Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please.

Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

MacBook Pro 15" i7, out of the box w/problems

My MacBook Pro is brand new out of the box, less than 48 hours, and I'm already having issues with it.
Before the first 24 hours out of the box, I got a message for a forced shut down (see image here: http://www.mactropolis.com/wp/wp-content/uploads/2009/01/macosxkernelpanic.png)
The following day, after coming out of sleep mode, I found it with a scrambled screen.
I haven't installed or transferred anything onto it whatsoever, but just been using Safari. I've heard that people are having problems with using Safari with webpages using Flash, but that might not explain the forced shut down.
I ran disk utility after the forced shut down and a few permissions were fixed but there were no other problems. After the scrambled screen, I ran an extended hardware test twice, and no problems were detected
I'm not sure there are any grounds for taking this to the Genius Bar, but I'm rather irritated for this to be happening when I haven't really started using this computer for more than browsing the internet.
Any suggestions? Might it be as simple as using something other than Safari?

The solution is extremely simple, return it for another. If you bought it from an Apple Store it should be no problem. If you bought it from an Apple Reseller you need to deal with them directly.
Don't wait, do it today.
Roger

Out of the box macbook pro 15" c2d problems

evening all,
right out of the box, i have had kernel panics every time i boot my new macbook pro c2d. i have also had the awake from sleep problem some people seem to be having. i am also unable to install either boot camp, parallels, or vmware. i have tried winxp, 2000 and vista in every combination. every time i try it corrupts the volume beyond repair and i have to wipe the hard drive and reinstall os x. i am getting worn out by banging my head against the wall. i thought this stuff was supposed to be easy. when i went to check on the firmware version for my macbook pro 15" c2d i noticed that i have the boot rom version and the smc version installed for original 17" macbook pro not the c2d version. it won't let me change the firmware back to a 15" c2d. it is showing MBP12.0061.B03 1.5f10 and i should have MBP22.00A5.B00 1.12f5 according to apple specs.
i will try to reset my smc, but the pram can not be reset via the usual keyboard combination because it just doesn't work like it did on my powerbook.
i am also going to try disabling the hibernate mode as suggested via terminal.
i am going to try trashing the plist preferences for the .AutoWake, PowerManagement and the systemuiserver.
i also have the problem when reinstalling os x several times that the optical drive gets stuck reading the original system disks and i have to start all over again. whew!!!
btw, i am a hardware tech but this is too much of a waste of time.
any other suggestions are very welcome.
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

here is an update for everyone, or at least you will get a good laugh out of it. I sent the macbook to applecare to be fixed and I just got it back. they replaced the harddrive and restored the os.
guess what? I turned it on and it had a kernel panic! then I tried to set up a user account and it had a ......... kernel panic! I had to laugh, what else can you do at this point?
they didn't fix what i told the tech support guy was the biggest issue on this machine. the boot room version is still MBP21.00a5.B01 which is for the 17" C2D. it is paired with the smc version 1.12f5 which is the version apple has listed for the 15" version. tried to change the boot room but it tells me it does not need the correction. everyone knows best yet i still get ....... kernel panics.....! lmao
here is the last kernel panic log if anyone is interested:
Wed Apr 18 13:35:56 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x0a124a48, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x0a124960, EBX: 0x02cd7008, ECX: 0x0000e070, EDX: 0x00000000
CR2: 0x0a124a48, EBP: 0x13dfb879, ESI: 0x0253ac00, EDI: 0x00000000
EFL: 0x00010203, EIP: 0x2a5dcb57, CS: 0x00000008, DS: 0x56b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13dfb678 : 0x128d08 (0x3c9afc 0x13dfb69c 0x131de5 0x0)
0x13dfb6b8 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x13dfb7c8 : 0x19a904 (0x13dfb7e0 0x0 0x989607 0x0) Unaligned frame
Backtrace terminated-invalid frame pointer 0x13dfb879
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Wed Apr 18 14:06:31 2007
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xd8505ed5, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xd8505ec1, ECX: 0x02bc806c, EDX: 0x02c4e6e8
CR2: 0xd8505ed5, EBP: 0x13ea3df8, ESI: 0x000e0000, EDI: 0x00000000
EFL: 0x00010282, EIP: 0x0017e42a, CS: 0x00000008, DS: 0x02c30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13ea3bd8 : 0x128d08 (0x3c9afc 0x13ea3bfc 0x131de5 0x0)
0x13ea3c18 : 0x1a3135 (0x3cf7b0 0x1 0xe 0x3cefe0)
0x13ea3d28 : 0x19a904 (0x13ea3d40 0x2d18b88 0x2c8fba0 0xe)
0x13ea3df8 : 0x1607c1 (0x2c4e6e8 0xe0000 0x0 0x1)
0x13ea3f48 : 0x1a33a8 (0x11b9c80 0xa35a3000 0x0 0x1)
0x13ea3fc8 : 0x19a834 (0x2bd3c40 0x0 0x10 0x0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff5f8
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be?

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be? Any ideas?

Brock8821-
Use iTunes on your computer. With the iPad connected, sign into your Apple account and check for updates.
Doing this should straighten out the problem.
Fred

New out of the box MacBook Pro with Caps Lock/Num Lock lit keys

I just set up my brand new MacBook Pro 15" laptop and, right out of the box, the Caps Lock and Num Lock keys were lit up. I didn't think anything of it, and transferred all my user files from my old PowerBook G4. Well, they 2 keys seem to be working in reverse. When Caps Lock is lit up green, all characters are in lower case. Same as Num Lock. Any advice? Do I have a lemon?
Thanks!

I've also had this problem twice over the past couple of weeks.
I have a theory that it has something to do with plugging in my USB mouse during the system boot. A reboot cured it both times though, and it's not gotten tot he point that it's annoying enough to investigate further.

Out-of-the​-box problem with L55-A5284 Laptop

Similar Messages

Maybe you are looking for

Out-of-the-box problem with L55-A5284 Laptop