Out put firewire direct to monitor?

Hi, I am trying to find an HD monitor that will accept IEEE394 (firewire) direct in (from video camera or Mac). Or, an adaption device that will convert from firewire to HDMI.

in the Audio/Video Settings window >> A/V Devices tab
make sure you have ticked the "Mirror on Desktop" checkbox
• Mirror on desktop: Select this checkbox to simultaneously show video on both your
computer’s display (in the Canvas or Viewer) and an external video monitor. Some
third-party video interfaces may override this setting.

Similar Messages

Is mountain lion can out put 10 bit colour? I nee to buy EIzo Monitor

Is mountain lion can out put 10 bit colour? I nee to buy EIzo Monitor.

No. OS X cannot do it. If you want to drive an Eizo at its full 10 bits per channel you need to use a Windows PC.

Imac and canopus advc110 can you out put to a monitor

I am new to this apple stuff and have after some pro advice settled for a canopus advc110 to go with my imac, i am now struggling with the settings to output to a monitor please help!!!!!

Hi
This works greatly with my Canopus ADVC 300.
I connect box to Mac via FireWire
My Box has one in and one out analog side. Connect Out with RCA-connectors to
Monitor RGB (RCA-In) or via a SCART-plug.
In FinalCut when starting up it should identify the "Camera/A/D-box" (External A/V) and not ask for it
When FCE/P is up and running. Select View Menu from top Row.
Down this select "External Video" -> All frames
If this doesn't work Select next line "Refresh A/V Devices" then "External Video" -> All frames
This works for me.
Read Manual of Your Canopus ADVC-110 if ther is any Dip-Switch settings needed
(Not same on ADVC-300 Sorry)
Yours Bengt W

What method u use to out put text

what method u use to out put text is top ....end top or write_form.
say me 1 reason for using write_form rather than top...endtop.

Logic Pro is a professional application that is available very cheap, so that professionals and amateurs alike can use the same tools. This is because the cost is subsidised by the cost of the mac computers.
A reciever that has optical, coax and HDMI would be a consumer grade home theatre system. Mixing to 5.1 is a highly specialised task, and you are very unlikely to get good results through a home theatre system, even if you could plug it straight in.
Professionals who do 5.1 mixing with Logic (I am one of them) would have a serious multichannel external audio interface, and would plug the disctrete outputs from there into a monitoring system setup in a properly designed room. Anything less would result in a mix that would sound different everywhere it is heard, and probably only good in your room.
The mix as done by logic provides a file or files that are 6 discrete channels. You would then use a program like "Compressor", (previously available with Logic Studio and not to be confused with an audio compressor) to convert the files to one of a number of possible formats.
The format that your receiver would be looking for would be a Dolby digital format, a licensed format designed especially for home theatre. If every mac was designed to deliver that natively so the very few who might use it are able to access it directly, every mac user would have to pay more. This wouldn't make sense.
Sorry.

How to get the last seven days for out put of present day

Hi Experts,
we developed one query for 3 years data
1.user enter the current date (21-03-2014) but out put value should be last seven days (21-03-2014 - 7) (last one week data only)
2.some times user will enter the (20-03-2014 ) but out put value should be last seven days (20-03-2014 - 7) (last one week data only)
how to achieve the 2 different scenario?
is there any standard variable ? please suggest .
Thanks,
Bindu.

Hi,
i created the Characteristic value variable not formula variable
in char variable i can't see the off set functionality but we can see off set function in formula variable
user requirement he wants enter the input value as date and he need last week data means one week data calday wise.
i tired the 0PREVWK , 0CWEEK these two variables these not asking the input and direct showing the out put.
these can achieve through the customer exit?
Thanks,
Bindu.

I want to take the photos off my iPhone and put them directly onto an external hard disk. I want to bypass iPhoto altogether. When I link my iPhone to my computer, it only opens in iTunes, which only gives me the option to save my photos to iPhoto. Help!

I want to take the photos off my iPhone and put them directly onto an external hard disk - I don't have any room left on my computer. I want to bypass iPhoto altogether. When I link my iPhone to my computer, it only opens in iTunes, which only gives me the option to save my photos to iPhoto. Help! This is seriously frustrating!.
Additionally, I'd like to be able to take the 2000+ photos out of iPhoto and put them on a disk in a folder. I have managed to export them to the hard disk but it's just plonked all 2000+ photos in a list - not ideal if I want to use it for anything else. And then I have to manually delete the photos from iPhoto. Is there not a quick and easy way of dealing with this?
Anyone got any bright ideas? Thanks for your help!

I too would like to be able to do this. Just put them where i want the. IFTT a scripting app will put the images in dropbox for you , but its been pretty iffy.

Final Cut Pro 6 - firewire output to monitor I lose Canvas window. . .?

Hello, I am running Final Cut Pro 6 (Suite 2) on a G5 1.6 processor, etc etc.
I have noticed that with this version of FCP, that when my media goes out the firewire cable to a production monitor, that my motion of the clips STOPS in the Canvas and Viewer windows.
Anyone know why that is? Older versions of final cut, there were no problems. . .now there is? Is there some simple setting somewhere i am overlooking?
Please help! As surprisingly while it is not dire, it IS a nuisance. . .
Thanks,
Walt

in the Audio/Video Settings window >> A/V Devices tab
make sure you have ticked the "Mirror on Desktop" checkbox
• Mirror on desktop: Select this checkbox to simultaneously show video on both your
computer’s display (in the Canvas or Viewer) and an external video monitor. Some
third-party video interfaces may override this setting.

No audio out to firewire

I have a 1.5 hour time line of a dance recital. In one dance there is a 2 second part where I get no sound out to my firewire deck.
The FCP VU meter shows activity between -12 and -6 db during the silence.
There is nothing funny in the waveform
If I use "built in audio" (though imac sound), I get sound.
If I put the audio into the viewer and view / play the audio with no video playing, I get sound from firewire out.
I installed all of the latest updates.
Any ideas anyone???
Thanks

Hi -
Go to where the missing two seconds are and back up two seconds. Place an in point there (two seconds before the strange audio disappearance). Now go two seconds past where the audio drops out, and place an out point.
Go to the menu File>Export>Quicktime Movie.
In the widow that opens give the clip a name like Audio Repair.
For the Setting: Current Setting
For Include: Audio Only
For Markers: None
and check the box Make Movie Self Contained.
Save that file to your desktop.
Once the file is saved, go to your desktop and open the file with Quicktime Player. Can you hear the entire audio track, including the "missing:" two seconds?
If you can, then import that file you created into your project, and edit it where you have your in and out marks placed.
Now try and see if this section will play out the firewire correctly.
Hope this helps.

Alv and excel sheet out put.

hi friends,
now i am working on sales and purchase order report. For this i have created three radio button on selection screen one for sales 2nd for purchase and 3rd for both. when i click sales radio button it is going to display only sales data in ALV out put list as well as in EXCEL sheet.
problem:-
Some layout fileds (out put fields) i am storing in VARIENT and when i have passed this VARIANT in a SELECTION-SCREEN so here the output is ok for me, and i am unable to display these same fields in EXCEL sheet for this Please could u tell that how we do this. please send the logic for this.
thands and regards.
sagi.

Hi Amol,
you are not getting me ...
see your itab will have all the fields irrespective of variant used. so you can directly use itab to download.
i guess you are using alv tool bar option to download.
but i am telling to use your own button to download the report using your own button with GUI_DOWNLOAD Fm.
for this you pass your ITAB and and then give the file name then this will save all the fields to excel file.
Regards
vijay

Error with viewing out of Firewire (hard to explain in 1 line)

I am editing on an iMac with FCP 5.1. For capturing I have my DV camera running into one of the firewire ports and my external drive running into the other firewire port which I am capturing to. This works great
However while I am editing I view the screen on a TV plugged into the output of the camera so the video streams from FCP into the camera and out into the tv. However this is having issues with not displaying the video properly and just getting black bars in footage when trying to stream footage. It looks fine on the computer but its not streaming out to the camera properly. Now I realise that the iMac has only one firewire bus but I thought that if it captures fine streaming both signals at once then the reverse should also work. Any ideas?
G5 iMac 20inch, Macbook Mac OS X (10.4.7) FCS 5.1, 500GB External

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Get "TV Out" graphics card for PAL monitor?

I'm having problems acheiving an external PAL monitor thru my camera. What if I cut out the camera with a new card for 'TV out', would this make the set-up more robust. Would the 'TV out' merely duplicate the computer monitor display? This is really frustrating, I need to see what I'm doing. Please help if you can!

It depends on what you mean by a new card. If you are talking about a Kona or Decklink - sure. A less expensive alternative may be the Canopus series of Digital Video/ Analog converter boxes. They take firewire in and output analog.
x

Payment Medium creation Out put ?

Hi Experts
When ever i run the payment proposal with the payment medium option also it is generating the DME file in the spool with out the immediate out put.
It used to create the DME file generation directly with out this issue before.
I went to User defaults in SU3 and tick marked the option Out put Immediately.
Then also the message is coming up.
Please let me know how to fix this part.
Thanks
Meenakshi.N

Hello
Sometimes even when you deactivate in open selection, the authorisation precede the output.
Please check with BASIS for deactivation to your profile.
Reg
suresh

Report out put to Excel file

Hi,
Please help me in this requirement.
Is there any option to get the out put of report 6i out put to excel format file.

Its not possible to export data directly from 6i to excel but you can export in text file and then open it in excel it will open very easily but keep it in you mind first eliminate all report groups.
and
There is a trick to capture Oracle Reports output (text output) into a excel sheet.
Basic Steps :
1) Set the output format for the report to XML
2) Run the report to generate output.
3) Save the output file locally as a XML file.
4) Open the file using MS Excel.
5) To make it more beautiful, you may use a MS Excel Template
and read below may be this will be helpful to u
http://kr.forums.oracle.com/forums/thread.jspa?threadID=853876
Reports 6i Matrix Output in Excel Format

Need to filter the out put of iw38 reprort

hello Experts,
i have requirement like need to filter the out put of iw38 report and after that again i need to filter that output by using department and client code and oreder .ned to show out put with 3 push buttons .
dertails:
selection screen fields:
region
customer code
oreder
date range
from these 4 fields i need to pass two(order and date range)   fields to iw38 report and then what ever output i am getting again that should filter by customer code and region which are there in my program
, need to display the out put with 3 push buttons .
plz suggest me with appraoach and sample code .
Note : i am using using submit and return export memory but its directly showing iw38 output and not coming back.

Hi ananta,
The function module LIST_FROM_MEMORY loads the list from the ABAP Memory to an internal table of the row type ABAPLIST.
The function module WRITE_LIST inserts the content of an internal table of the row type ABAPLIST in the current list.
The function module DISPLAY_LIST displays the content of an internal table of the row type ABAPLIST in a separate list screen.
check the below program..
REPORT Z642_TEST2.
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY
                                AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
write: ' This is calling program', sy-repid.
Edited by: Rammohan Nagam on Apr 8, 2009 4:05 PM

MC-Q out put to excel

Dear Experts,
When I am exporting out put of T-code MC-Q to excel, all data coming in one row, but in many columns. How to fix this problem.
Regards
Ishu

Its not possible to export data directly from 6i to excel but you can export in text file and then open it in excel it will open very easily but keep it in you mind first eliminate all report groups.
and
There is a trick to capture Oracle Reports output (text output) into a excel sheet.
Basic Steps :
1) Set the output format for the report to XML
2) Run the report to generate output.
3) Save the output file locally as a XML file.
4) Open the file using MS Excel.
5) To make it more beautiful, you may use a MS Excel Template
and read below may be this will be helpful to u
http://kr.forums.oracle.com/forums/thread.jspa?threadID=853876
Reports 6i Matrix Output in Excel Format

Out put firewire direct to monitor?

Similar Messages

Maybe you are looking for