Out put for MIGO  for multi items.

Dear All,
i am unable to take print out for Multi items in migo tranction. eventhough spool is not generating. If i select send immdiately option then document is update terminating, Document is not save. if i select 3rd optin " send by "send with application own tranction" then document will be saved and there is no spool as well as print option in Yellow colour.
plz suggest me for multi items printout. And also suggest me for can i maintain in Tr code MN21 for single as well as collective slip print option for single output type.
waiting for reply
regards
Ashok

hi ashok,
what is the output type you have assigned for the printing.
in mn21 you create a output  type we03 with tr.event as we and print version as 3(collective slip ) at the time of Migo.
print indicator as 1.
you can also take the print in MB90.IN THIS you give the document no and processing mode as2 for reprinting and then execute.
Regards,
velu

Similar Messages

  • BADI for MIGO for restricting User to entered other MVT types?

    Hi All,
    BADI for MIGO for restricting User to entered other MVT types?
    I want to restrict some of user not to use 501 Movement type ..I already created a Ztable for checking User for 501 type.
    Please let me know any Enhancement to be used to restrict user ?
    Thanks and Regards
    Steve

    Hi Steave,
    You can use this enhancement exit MB_CF001, this exit will be called every time before posting, you can use your logic in this exit. see its documentation first before implementing.
    Regards
    Ahsan

  • Out Put not generating for a change in PO

    Hi Gurus..
    Recently Our client requirement is to have Full PO out put for a change in PO for EDI output.
    I have found from Net that we need to do customizing setting at below path-
    1 )SPRO-IMG-Material Management-Purchasing-MessageOut Put Control-Message Determination Schemas -Define Message Determination schema for PO-Assign Schema to PO
    We need to Unflag the Tab "M'
    2) SPRO-IMG-Material Management-Purchasing-MessageOut Put Control-Message Tpes--Define Message Type for POFine tune control-PO
    I have deleted the Operation 2 NEU Change
    I have done all above settings in Quality client
    But after the above customizing setting I have ound no PO output is generated for a change PO in repective client.
    Hence to revert all above custmoizing setting, I have flaged the Tab "M" & also added the Operation 2 NEU Change.
    But after all above reversal also, I have found that still no PO output is generated for any change in PO.
    Your help on the above issue is highly appreicated...what have gone wrong & solution for the same.
    Thanks In advance.
    Dipak Dawkhar

    Hi Deepak,
    Please chek the field / value which u have changed is relavant to  printouts of the change.
    You can check  with following path
    SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
    Confirm tick is provided for PO ( P)
    Vivek

  • Can I get stepped out put voltage signal for controls from the BNC with Labview?

    Hi!
    I am new user to NI Labview. I am working in controls applied in Combustion sciences. I want control the Solenoid valve ( Jefferson made,230 V, 11 W) in stepped manner. BNC (2110) is used for the input signal (Piezoelectric pressure transducers) and output signal. The maximum out put voltage from BNC is 5 V. Can I get the out put voltage in stepped and increasing order to ensure the better controls of the solenoid valve?
    Also I would like to know, is it possible for me to control the working frequency ( Injecting) of the solenoid valve with the help of Lab view?
    Thanks.
    With Regards,
    Ganesh

    Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at  your experience I am not sure if I should.
    My key comes from the back of a laptop o so I guess that would be a W7
    OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
    Also could it be because we are attempting to get the ISO after the product became EOL ?
    http://windows.microsoft.com/en-us/windows/lifecycle
    Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
    Will keep you posted

  • BDC for MIGO for GR OutBound Delivery( A01 & R05 ) from Movement Type 107 to 109

    Hi,
    I am stuck with a very typical situation need all your expertise and advices for a solution.
    We are basically trying to create change the movement type from 107 to 109 through MIGO.
    I have made a BDC recording for MIGO ( because we would like to track each delivery specifically under shipment , I know that there is a BAPI which is there to do this but it works fine if we do the shipment with Purchase Order as input which dont want in that manner )
    Process:
    1. Creating Production Order
    2. Creating Purchase Order
    3. Creating STO
    4. Deliveries
    5. PGI for Deliveries
    6. Shipment for group of outbound Deliveries
    I have created a z program where i am passing shipment number in the selection screen.
    Then it would take all the deliveries for that shipment and pass each delivery to MIGO and process it and change the status from 107 to 109.
    Interesting part here is, the code works absolutely perfect only from my ID. But when I test from other ID it is not executing, so to check where is the problem I have added mess_tab to the CALL TRANSACTION to capture what message is been populated for my ID comparing with others
    Message Captured on Others ID's:
    MSGID: 00
    MSGNR: 344
    MSGV1: SAPLMIGO
    MSGV2: 1300
    Message Captured on MY ID:
    MSGID: MIGO
    MSGNR: 012
    MSGV1: 5000005802
    MSGV2: (empty)
    This is the problem this program is executing only on MY ID, rest all ID's it is not processing.
    We have cross verified with security and basis regarding any authorization issues but nothing came up.
    Please help me what could be the issue ( WHY it is processing successfully for my and WHY NOT for other ID's)
    Below is the main code :
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'                     " Converting Date format to DD/MM/YYYY
         EXPORTING
           DATE_INTERNAL            = sy-datum
         IMPORTING
           DATE_EXTERNAL            = lv_date_external
         EXCEPTIONS
           DATE_INTERNAL_IS_INVALID = 1
           OTHERS                   = 2.
           IF SY-SUBRC <> 0.                                     "#EC NEEDED
    * Implement suitable error handling here
           ENDIF.
    *   Validating input shipment number with database table VTTP
           SELECT VTTP~TKNUM
                  VTTP~TPNUM
                  VTTP~VBELN
             FROM VTTP INNER JOIN VTTK
             ON VTTP~TKNUM = VTTK~TKNUM
             INTO TABLE IT_VTTP
             WHERE VTTK~TKNUM = P_TKNUM
               AND VTTK~STDIS = 'X'.
           IF sy-subrc = 0.
    *   Validating all deliveries having same Delivery type or not
             SELECT * FROM likp INTO TABLE it_likp FOR ALL ENTRIES IN it_vttp WHERE vbeln = it_vttp-vbeln
                                                                                AND vbtyp = 'J'.
             IF sy-subrc = 0.
               CLEAR lv_lines.
               LOOP AT it_likp INTO wa_likp.
                 REFRESH:it_vbfa,BDCDATA.
    *   Validating if Delivery Type = 109 (GR already done), or Delivery Type = 107 (must process for GR )
                 SELECT * FROM vbfa INTO TABLE it_vbfa WHERE vbelv = wa_likp-vbeln
    *                                                AND vbtyp_v = 'J'
                                                         AND bwart = '109'.
                 IF sy-subrc = 0.
                   lv_flag1 = 'X'.
                 ELSE.
                   SELECT * FROM vbfa INTO TABLE it_vbfa WHERE vbelv = wa_likp-vbeln
    *                                                  AND vbtyp_v = 'J'
                                                           AND bwart = '107'.
                   IF sy-subrc NE 0.
                     MESSAGE 'No Deliveries with Movement Type "107" ' TYPE 'I'.
                   ELSE.
                     lv_flag2 = 'X'.
                     lv_lines = lv_lines + 1.
    **  BDC for MIGO
                     perform bdc_dynpro      using 'SAPLMIGO' '0001'.
                     perform bdc_field       using 'BDC_OKCODE'
                                                   '=OK_GO'.
                     perform bdc_field       using 'GODYNPRO-ACTION'
                                                   'A01'.
                     perform bdc_field       using 'GODYNPRO-REFDOC'
                                                   'R05'.
                     perform bdc_field       using 'GODEFAULT_TV-BWART'
                                                   '109'.
                     perform bdc_field       using 'BDC_CURSOR'
                                                   'GODYNPRO-OUTBOUND_DELIVERY'.
                     perform bdc_field       using 'GODYNPRO-OUTBOUND_DELIVERY'
                                                   wa_likp-vbeln. "'80019574'.
                     perform bdc_field       using 'GOHEAD-BLDAT'
                                                   lv_date_external. "'04/29/2015'.
                     perform bdc_field       using 'GOHEAD-BUDAT'
                                                   lv_date_external. "'04/29/2015'.
                     perform bdc_field       using 'GOHEAD-WEVER'
                                                   '1'.
                     perform bdc_dynpro      using 'SAPLMIGO' '0001'.
                     perform bdc_field       using 'BDC_OKCODE'
                                                   '=OK_POST1'.
                     perform bdc_field       using 'GODEFAULT_TV-BWART'
                                                   '109'.
                     perform bdc_field       using 'GOHEAD-BLDAT'
                                                   lv_date_external. "'04/29/2015'.
                     perform bdc_field       using 'GOHEAD-LFSNR'
                                                   wa_likp-vbeln. "'0080019574'.
                     perform bdc_field       using 'GOHEAD-BUDAT'
                                                   lv_date_external. "'04/29/2015'.
                     perform bdc_field       using 'GOHEAD-WEVER'
                                                   '1'.
                     perform bdc_field       using 'GODYNPRO-DETAIL_ZEILE'
                                                   '   1'.
                     perform bdc_field       using 'GOITEM-ERFME'
                                                   'EA'.
                     perform bdc_field       using 'GOITEM-ERFMG'
                                                   '1'.
                     perform bdc_field       using 'GOITEM-LSMNG'
                                                   '1'.
                     perform bdc_field       using 'GOITEM-LSMEH'
                                                   'EA'.
                     perform bdc_field       using 'GOITEM-MIGO_ELIKZ'
                                                   '1'.
                     perform bdc_field       using 'GOITEM-BWART'
                                                   '109'.
                     perform bdc_field       using 'GOITEM-LGOBE'
                                                   'RX Cross-docking'.
                     perform bdc_field       using 'BDC_CURSOR'
                                                   'GODYNPRO-DETAIL_TAKE'.
                     perform bdc_field       using 'GODYNPRO-DETAIL_TAKE'
                                                   'X'.
                     PERFORM bdc_dynpro      USING 'SAPLMIGO' '1300'.
                     PERFORM bdc_field       USING 'BDC_CURSOR'
                                                   'G_TIP_DONT_SHOW_AGAIN'.
                     PERFORM bdc_field       USING 'BDC_OKCODE'
                                                   '=OK_TIP_GO'.
                     PERFORM bdc_field       USING 'G_TIP_DONT_SHOW_AGAIN'
                                                   'X'.
    *& Avoid unncessary screens to populate while processing background.
                     LV_OPTIONS-DISMODE = 'N'.
                     LV_OPTIONS-UPDMODE = 'S'.
                     LV_OPTIONS-NOBINPT = 'X'.
                     CALL TRANSACTION 'MIGO' USING BDCDATA  OPTIONS FROM LV_OPTIONS MESSAGES INTO IT_MESSTAB1 .
                     WAIT UP TO 1 SECONDS.
                     DELETE IT_MESSTAB1 WHERE MSGTYP NE 'E'.
                     IF IT_MESSTAB1[] IS NOT INITIAL.
                       APPEND LINES OF IT_MESSTAB1 TO IT_MESSTAB.
                     ENDIF.
                   ENDIF.
                 ENDIF.
               ENDLOOP.
             ENDIF.
           ELSE.
             MESSAGE 'Shipment Number does not exists Or not Planned' TYPE 'E'.
           ENDIF.
         ELSE.
           MESSAGE 'Please insert Shipment Number' TYPE 'E'.
         ENDIF.
         IF lv_flag1 = 'X' AND lv_flag2 = 'X'.
           MESSAGE 'This shipment is processed with an inconsistent goods receipt' TYPE 'I'.
         ELSEIF lv_flag1 = 'X'.
           MESSAGE 'Shipment already been processed for these deliveries' TYPE 'I'.
         ELSEIF lv_flag2 = 'X'.
           lv_lines1 = lv_lines.
           CONDENSE lv_lines1 NO-GAPS .
           CONCATENATE lv_lines1 'Goods Receipt are posted for the shipment '
                  INTO lv_message SEPARATED BY space.
           MESSAGE  lv_message TYPE 'I'.
         ENDIF.
    * Display Messages from Message TAB.
         DELETE ADJACENT DUPLICATES FROM IT_MESSTAB.
         DATA:lv_msg TYPE string.
         LOOP AT IT_MESSTAB INTO WA_MESSTAB.
           CALL FUNCTION 'FORMAT_MESSAGE'
             EXPORTING
               ID        = WA_MESSTAB-MSGID
               NO        = WA_MESSTAB-MSGNR
               V1        = WA_MESSTAB-MSGV1
               V2        = WA_MESSTAB-MSGV2
               V3        = WA_MESSTAB-MSGV3
               V4        = WA_MESSTAB-MSGV4
             IMPORTING
               MSG       = lv_msg
             EXCEPTIONS
               NOT_FOUND = 1
               OTHERS    = 2.
           IF sy-subrc <> 0.
    * Implement suitable error handling here
           ENDIF.
           WRITE:/ lv_msg.
         ENDLOOP.
    *        Start new screen                                              *
       FORM BDC_DYNPRO USING PROGRAM DYNPRO.                 "#EC PF_NO_TYPE
         CLEAR BDCDATA.
         BDCDATA-PROGRAM  = PROGRAM.
         BDCDATA-DYNPRO   = DYNPRO.
         BDCDATA-DYNBEGIN = 'X'.
         APPEND BDCDATA.
       ENDFORM.
    *        Insert field                                                  *
       FORM BDC_FIELD USING FNAM FVAL.                       "#EC PF_NO_TYPE
         CLEAR BDCDATA.
         BDCDATA-FNAM = FNAM.
         BDCDATA-FVAL = FVAL.
         APPEND BDCDATA.
       ENDFORM.
    Thanks,
    Srini

    Hi Rob,
    Thanks for quick reply.
    I have checked the NOTE : 304122
    But there in the NOTE it says ( " BAPI, BAPI_GOODSMVT_CANCEL, BAPI_GOODSMVT_CREATE, CNTL_ERROR" )
    These BAPI's work perfectly for (purchase order as input type), but here out type is ( A01 & R05 ) we are giving DELIVERY NUMBER as input to MIGO.
    So for this scenario we cannot use those BAPI's mentioned in the NOTE.
    Also as stated earlier in the message interesting part is
    "The code works absolutely perfect only from my ID. But when I test from other ID it is not executing. Code is working exactly as expected ONLY to my ID. When i try to execute the same code from another's ID it is not working"
    So what do you think might be the issue?

  • User Exit for MIGO for  batch

    Hi expert
    I am looking for user exits .at the time of migo when batch is generated into want the batch field to get grey, so the end user wont able to change the Batch no. and i want the grey field to be done for certain material. like ROH
    Can anyone of you suggest me a more appropriate User exit to work on. Please dont give me a list of user exits out there for migo as I have seen all those in Different threads.
    Thank You.
    Nabil

    Check with your ABAP person for BAdI MB_DOCUMENT_BADI ...here use the logic that system will check the MATNR...then for those MATNR their individual MTAT & if found MTAT = ROH then the CHARG field will be disabled.
    Also through the same logic check whether exit MBCFC003 can be used.
    Regards,
    Indranil
    Edited by: INDRANIL BHATTACHARYYA on Oct 1, 2010 9:49 AM

  • BADI/EXIT for MIGO for accounting  document posting

    Hi
    I am using MIGO where SAP post Mat Document and Accountying document.
    This Uses FM  'MB_POST_GOODS_MOVEMENT  < Include LMIGOKG1>, once this FM executed both MKPF and BKPF data gets filled . I can see tha data for MKPF in debug but I am not able to see data for Accounting Document.Even I cant see the Acc. document no assigned by SAP
    I need to change some fieds for Acc. Document <BSEG-VBUND>
    Can any one help me to find in which structure or table I can get data for Accounting document

    am using the method POST_DOCUMENT,
    am writing the code like..
    sample code..
    DATA: wa_mseg type mseg,
    wa_mch1 type mch1,
    wa_ausp type ausp.
    loop at it_mseg into wa_mseg.
    *select single * from mch1 into wa_mch1 where matnr = wa_mseg-matnr*
                                                               and charg = wa_mseg-charg.
    if sy-subrc is initial.
    *select * from ausp into wa_ausp where objek = wa_mch1-cuonj_bm*
                                                   and klart = '023'.
    if sy-subrc is initial.
    if wa_ausp-atwrt EQ 'ACCEPTED'.
    continue.
    else.
    if wa_ausp-atwrt EQ 'REJECTED'.
    call function 'popup_to_display_text'.
    endif.
    endif.
    endif.
    endif.
    endloop.
    when i debug ,i find no data in the mch1 table ..
    any help..
    thanx

  • Badi for MIGO for positions, similiar to ME_PROCESS_PO_CUST

    hi all!!
         i need to do some things in MIGO tx, similar to badi for ME21N: ME_PROCESS_PO_CUST
    I saw: MB_MIGO_ITEM_BADI  is it good or "compatible" with me_process_po_cust ??
    thanks in advance!

    Hi,
    Enter trx. SE18 and assign MB* in badi name to find one that helps you.
    Best regards,
    Caíque Escaler

  • Need to update out put tax classifcation code for a range of items in Orac

    Hi,
    I need to update out put tax code for a range of items in Oracle EBS. At the moment we update tax code for individual items manually ubder invoice tab. Is there a better way to do this.
    Regards

    Where can I find the mtl_system_items_interface table?Under INV schema.
    R12 -- INV.MTL_SYSTEM_ITEMS_INTERFACE
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=MTL_SYSTEM_ITEMS_INTERFACE&c_owner=INV&c_type=TABLE
    11i -- INV.MTL_SYSTEM_ITEMS_INTERFACE
    http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=MTL_SYSTEM_ITEMS_INTERFACE&c_owner=INV&c_type=TABLE
    Thanks,
    Hussein

  • Out put type for delivery challan

    Dear all
    We are Developing Forms for Delivery Challan, GR receipts , GR Tag and GR Issue
    Please reply me what message type is needed for each transactions and how it is attached to specifice movement type.
    Regards,
    Vimlesh Shah

    yes i know various types are available i system
    but which to use and how it is link to specific movement type
    eg  return to vendor ..out put is needed for only selected movement type and which standard form need to maintained
    Regards,
    Vimlesh Shah

  • GR out put error :No messages for initial processing exist

    Hi All
    When Im process the out put for GR using T-Code MB90, the following message appears and I'm able to see the out put "No messages for initial processing exist".I have checked the three processing modes even it is giving the same mesaage.Can any body help  to how to see the GR out put.
    thanks and regards,
    Sri.........

    Hi ,
    I think the necessary condition records might not exist.
    You can maintain the same using MN21.
    Also check whether the necessary customising is done using Transaction NACE and by selecting application ME.
    Regards
    Ramesh Ch

  • BADI/User exit for MIGO fi postings

    Hello Experts,
    I have one requirement regarding at the time of MIGO accounting entry is generating based on the OBYC settings,now the client want along with this entry, want to create one more FI document through background,In the background we will give the debit g/l and credit g/l.That means at the time of MIGO two FI documents has to generate one is with OBYC setting gl's and second FI entry is from programe hard coded gl's.
    For this requirement has any BADI/USER Exit.I appriciate your valuable inputs.
    Regards,
    Nivas.

    Hi,
      May I know why you need two accounting documents?
      You may refer the similar thread: BADI / Exit required for MIGO for posting FI document
      And about the number ranges - I would suggest a custom number range object and a different number range for these additional documents.
      Also refer the doc: Methods to find Customer/User Exit's & BADi's for a Transaction Code!
    Regards,
    AKPT

  • Where we will see the out put of propotional factor

    Hi Experts,
    I have maintained in mc8v (Proportional factor)  after this where is the out put will see for  propotional factor . I have  maintained  in basic proportion is cube ,keyfigure,verion and calculate proportion maintained planning area, keyfiguer in other setting maintained selection profile. Can you tell me output where will see. how it will work. can u elaborate.
    Regards,
    moon

    Moon,
    The keyfigure that is usually updated is APODPDANT.  Find or create a view where this keyfigure is visible (that particular book must have 'manual proportion maintenance' turned on), and you can then review the results of the Prop Factor calculation by opening the planning book using that view. 
    Proportional factor will do nothing unless you have configured your planning area to use it for disaggregation, or you have included this Proportional Factor KF in one of your macros.
    http://help.sap.com/saphelp_scm70/helpdata/EN/66/29fb672fbe11d398240000e8a49608/frameset.htm
    Best Regards,
    DB49

  • MRP list out put tables for header and item -reg

    Hi ,
    What is the table to be used for MRP out put
    header is MDKP
    for item what is the table ?
    regards,
    madhu kiran

    Dear,
    Tthe MRP item data is stored in a data cluster. The database
    table is MDTC, and the data cluster area is ar. Use the following command to
    import the data from the data cluster:
    Import <structure> from database mdtc(ar) ID <key>.
    The ID key value comes from the field dtnum (Number of the material
    requirements planning table) in table MDKP
    MDKP MDTB MDKP
    Please refer this also,
    [Table for MRP item|table for MRP item]
    Regards,
    R.Brahmankar

  • Blocking print out put for a material in MIGO with reservation

    Dear Gents
    How can we block printing a particular material of a storage type from MIGO for reservation
    regards
    anant

    hi ashok,
    what is the output type you have assigned for the printing.
    in mn21 you create a output  type we03 with tr.event as we and print version as 3(collective slip ) at the time of Migo.
    print indicator as 1.
    you can also take the print in MB90.IN THIS you give the document no and processing mode as2 for reprinting and then execute.
    Regards,
    velu

Maybe you are looking for