Outage in and around Columbus, Ohio?

hey couldn't find a general network service area of the forum to post this. so sorry if it doesn't belong here. but some of my friends( not including me) are experiencing a  full data outage since about midnight our time. They're located around the Lewis Center area. anyone else having this issue?

Good Morning, krobson17!
I checked on the area for alerts/outages and I haven't seen any reported issues.  Are you still experiencing the data issue?

Similar Messages

  • Lag Data / 4G in Columbus Ohio Area 6/8/2011

    Just wondering if anyone else is getting lag in the Columbus area? My thunderbolt normally will zip along, but this morning, it's super slow even though it says it's connected to the 4G network.
    I normally get on my Sirius / XM app in morning, but this morning it was so slow the app basically timed out. I'm able to load web pages but, it's spotty and slow. The SpeedTest app won't even work
    I haven't heard any from Verizon about the network being down.
    I Rebooted, toggled the 4G, did a dance, ect ect.

    Hello br27125,
    There are a lot of factors that we take into consideration when there are service issues. Location is one of the factors as well as the device being used. Below, I have some questions so I can better understand the root cause so I can customize a solution for you. If you would be so kind as to reply with the answers then that would be great!
    How many bars of signal is displayed on the device in the problematic location?
    Were you ever able to use the phone previous without any problem at the location in question?
    Does you experience these issues indoors, outdoors, or both?
    Do the dropped calls happens when making or receiving calls?
    Is the issue with the same number when happening?
    What part of the southwest Columbus, Ohio area? (zip code preferred)
    Once you have provided answers to the questions then I can provide a solution for you. I look forward to your next posting.
    Thank you...

  • Network Coverage Columbus Ohio

    I received a text indicating enhancements were made in Columbus, Ohio. Exactly which area of Columbus benefits from this enhancement? I have noticed that I often get a "No Service" status on my phone when in my house. If I go outside, I have spotty coverage sometimes. Wasn't a problem in the past. No changes have been made on my part - same phone and plan since I became a customer over a year ago.

    Hey
    I’m sorry to hear you are experiencing poor service in your area. I’d be happy to help!  I would recommend checking out our AT&T Mark The Spot app to capture the location of areas where there is little or no service. This information is then used to plan future network improvements. We realize you won't be able to report network issues from the app without wireless service but you can mark a place on the map and report the issue when service has been restored or you can use Wi-Fi. Visit the app store for your device manufacturer and download the AT&T Mark the Spot app.
    Mark the Spot is free for AT&T customers to download:
    Get Mark the Spot for iPhone
    Get Mark the Spot for Android
    Get Mark the Spot for Windows Phone
    Get Mark the Spot for BlackBerry
    For more information on using the app please see here.
    I hope this helps!
    Charise
     

  • HT1212 My daughter's iPod touch is stuck on a blank screen with the loading circle just going around and around. I tried to restore it, but it says I have to enter the passcode. I have the passcode, but as I said, there's nothing on the screen. How do I f

    My daughter's iPod Touch is stuck on a blank screen with that loading circle thing just going around and around. She said she was trying to duplicate an app or something, and all the the apps started shaking like when you delete them. I turned the iPod off, but it never turned back on completely. I tried to restore it, but it's saying that I have to enter the passcode. But, as I said, there's nothing on the sceen excect the circle thing. Please help!!!!!

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Help!  I have an iMac 24" OSX version 10.6.8 my iphoto is having problems.  It will not open properly.  All I get is the little wheel going around and around.  My iphoto is iphoto'11 version 9.2.3(629.52)  What should I do to make it work properly?

    Help!   I have an iMac 24" OSX version 10.6.8.  My iphoto is having problems.  It will not open properly.  All I get is the little wheel going around and around.  My iphoto is:  iphoto'11 version 9.2.3(629.52).  What do I need to do to remedy this?  I recently installed InstallMac.  I don't want this on my computer.  I don't know how to get it off.  I'm afraid that is what scrogged my iphoto.  Can anyone tell me how to correct this situation?

    Re: iPhoto:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • In mail, how do I get the wheel to stop going around and around beside the "sent" on the side of the screen?d

    I am having trouble getting rid of the annoying broken up circle going around and around on the right side of "sent" in the left panel.  I went into mail preferences and retyped the passwords for the server, but it still keeps going.  Also tried a repeat sending of the message.  Now the messages keeps showing up in the Outbox with the wheel still turning.  Is there anything more to do or is this a matter for my server company?

    I just checked with my service provider to make sure that my passwords are the same for them as well as my mail for this account.  Was able to send an email from online, but not mail on my iMac even though when I edited my accounts in Mail preferences to be sure that the password matches.  This is driving me crazy.  Please help.

  • I just enrolled in CC and I can get the app on my desk but when I navigate from home to apps to download apps, it just goes around and around in a blue circle (I'm on a mac).  help

    I just enrolled in Creative Cloud and I can get the app installed on my desk but when I navigate from Home to  Apps to download apps, it just goes around and around in blue circle (freezing).  Im on a MAC. 
    Thank you!

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • My imac will not start - it is hunged up, when I turn it on I see the apple and the little wheel go around and around and nothing happens - what can I do ???

    Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around  HELP !!

    Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
    http://support.apple.com/kb/HT1509
    Have you been backiing up?

  • OS won't shut down - spinner goes around and around

    For the last month or so my Mini will not shut down (or restart). I am on the latest rev. of SL (10.6.8). It gets to the blue screen and then the spinning wheel goes around and around until I have to turn it off by the power button.
    I found much older thread (now archived) that suggested that this spinning wheel on shutdown has something to do with power management settings. 
    I have done the typical steps of repairing permissions and (from the Install CD) running Disk Utility, which reported no problems.  I also trashed the com.apple.powermanagement.plist file, which is what seemed to fix things in that earlier (2009) discussion.
    I have the same rev. of SL running on my MacBookAir, which is having no problems doing a shut down (or restart).
    Any suggestions would be appreciated!

    Are you using any Font Management software or Adobe Creative Suite software?
    Nope.  I do have some Macromedia (now Adobe) software -- Fireworks and Dreamweaver.  But, actually, I don't think I've fired those up on the Mini in months.  I use them on the MBAir and it's not experiencing problems shutting down.
    Are you running Time Machine?
    Nope again.  I run SuperDuper for scheduled backups -- have been doing that for years. 
    But this is related to where I started noticing the problem.  I have SD set to run around midnight and it was set to do a restart when it completes.  I started to notice that the system would be in this "hanging" mode when I'd check in the morning.  I had thought it was a conflict with EyeTV (which is about all I use the Mini for these days).  If I run SD and then have EyeTV try to start recording without a restart, EyeTV throws up.  So I then had a system restart scheduled to run at 3:15 a.m., between the SD backup's end and the start of EyeTV's daily recording routine.  However, since this problem has started I am getting up at 4 a.m. to "push the button" to do a manual shutdown and restart.
    It was suggested that I note the time of the shutdown, do a shutdown, force it to power off, and then check the system log.  I did the latest shutdown at 2:19 (14:19) and here is the end of that log.  Problem is, I don't really know what it's telling me.  I haven't run Parallels on this machine for some time now.  And Virtual PC (if that is referring to the very old old package and not something that's part of Parallels) is not supposed to even be on this machine -- it was on my earlier G4.
    ===== Started a shutdown at 14:19 ======================
    Aug 3114:19:53 myMini shutdown[1117]: halt by keri:
    Aug 3114:19:53 myMini shutdown[1117]: SHUTDOWN_TIME: 1314825593 239955
    Aug 3114:19:53 myMini Parallels[1119]: Stopping Parallels Dispatcher Service
    Aug 3114:19:53 myMini Parallels[1131]: Stopping Parallels networking
    Aug 3114:19:53 myMini SystemStarter[40]: Operating System enhancements for Virtual PC(1124) did not complete successfully
    Aug 3114:19:54 myMini SystemStarter[40]: The following StartupItems failed to stopproperly:
    Aug 3114:19:54 myMini SystemStarter[40]: /Library/StartupItems/VirtualPCOSServices
    Aug 3114:19:54 myMini SystemStarter[40]: - execution of Startup script failed
    Aug 3114:19:54 myMini prl_naptd[158]: Exiting Parallels Network Daemon
    Aug 3114:19:54 myMini Parallels[1151]: Unloading kernel extension  prl_netbridge.kext
    Aug 3114:19:55 myMini Parallels[1174]: Failed to unload kernel extension  prl_netbridge.kext
    Aug 3114:19:55 myMini Parallels[1179]: Unloading kernel extension  prl_vnic.kext
    Aug 3114:19:55 myMini Parallels[1202]: Failed to unload kernel extension  prl_vnic.kext
    Aug 3114:19:55 myMini Parallels[1205]: Parallels Networking was stopped
    Aug 3114:19:55 myMini mDNSResponder[21]: mDNSResponder mDNSResponder-258.21 (May 262011 14:40:13) stopping
    Aug 31 14:19:55myMini DirectoryService[11]: BUG in libdispatch: 10K549 - 1960 - 0x10004004
    Aug 3114:19:55 myMini prl_naptd[219]: Exiting Parallels Network Daemon
    Aug 3114:19:55 myMini WindowServer[96]: hidd died. Reestablishing connection.
    Aug 3114:19:55 myMini WDButtonManager[204]: CGSShutdownServerConnections: Detachingapplication from window server
    Aug 3114:19:55 myMini WDButtonManager[204]: CGSDisplayServerShutdown: Detachingdisplay subsystem from window server
    Aug 3114:19:55 myMini WindowServer[96]: bootstrap_look_ip failed: Unknown servicename
    Aug 3114:19:55 myMini WDButtonManager[204]: 3891612: (CGSLookupServerRootPort)Untrusted apps are not allowed to connect to or launch Window Server beforelogin.
    Aug 3114:19:55 myMini WDButtonManager[204]: kCGErrorRangeCheck: On-demand launch ofthe Window Server is allowed for root user only.
    Aug 3114:19:55 myMini WDButtonManager[204]: kCGErrorFailure: Set a breakpoint @CGErrorBreakpoint() to catch errors as they are logged.
    Aug 3114:19:55 myMini WDButtonManager[204]: HIToolbox: received notification ofWindowServer event port death.
    Aug 31 14:19:55 myMini WDButtonManager[204]:port matched the WindowServer port created in BindCGSToRunLoop

  • My iphoto will not open correctly.  All I get is the little wheel going around and around.  What do I need to do to open my iphoto?

    My iphoto will not open correctly.  All I get is the little wheel going around and around.  What do I need to do to fix this?  I would like to be able to see my photos again.

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Lines over images and around text in Captivate SWF file

    My project works & views fine in captivate and when published, it views fine on my mac - through flash player and browsers. But when I send a swf file to the client to view they see odd lines above and below images.
    But they dont see the lines when they view the htm file within a browser - then it views fine.
    The lines only appear when there's text over an image.
    Screen shots attached.
    My captivate project was created by importing a Powerpoint document, with images and text on each slide.
    I've changed the optimisation / slide quality through prefrences and on each slide to the highest quality.
    I've also un-selected the advanced slide compression.
    Is there another thing I can try to iron out these lines?
    Some of the images within Powerpoint are stretched, would this cause the lines?
    Is it a flash player issue?
    Or a zooming issue?
    Any help is much appreciated!

    Thanks Lilybiri,
    I am a new user & just finding my way
    I understand how to publish and how Captivate creates a zipped file with a SWF, HTML, JS and CSS files etc. (Im using Captivate 7). 
    How do you send Captivate projects to clients for review / approval before you supply them with the whole project zipped file?
    So far I've been sending them the swf file to check. And have had troubles with them viewing the lines over images and around text. Even though I cant see the lines.
    I need the client to see what I'm seeing - a project without any lines.

  • My IPad will not shut down. The wheel in the middle just goes around and around. Any one else have this problem and know what I should do?

    Has anyone had problems shutting down your IPad 2. I have what looks like a wheel in the middle of my screen that goes around and around. 3 hrs now!!

    Hold down the home button and power button until you see the Apple logo and that will reboot it.

  • I upgraded a week ago and every since it constantly stops in the middle of running and says "Mozilla Firefox not responding" the screen goes grey and the the little blue circle goes around and around,it didnt do this till I updated.

    I upgraded a week ago and every since it constantly stops in the middle of running and says "Mozilla Firefox not responding" the screen goes grey and the the little blue circle goes around and around its so annoying and does it all the time like while I'm typing this it has happened twice, it didn't do this till I updated.

    hummm never had it do that till I upgraded last week PLUS I lost all my Favorites/Bookmarks that really pissed me off my husband and I lost ALL of them I have had them for years and I upgrade and lose them can't even tell you how mad we were 8o/ very frustrating to say the least. Thanks for your help!! CRAP it just did it again I guess it didn't work........GRRRRRR!!!! I'm atta loss 8o(

  • Circular arrow on one of my email accounts goes around and around for 5 minutes or more and then popup says mail is going to quit.  Nothing has come into this account for several weeks.

    The circular arrow on one of my email accounts (I have three, and this is one of two googlemail accounts) goes around and around for 5 minutes or more with nothing happening and then a pop up says mail is going to quit - report to apple.  Nothing has gone into this account for several weeks, and this is my 'business account'.

    Hi Stewart,
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't help & you can afford to redo any Mail Rules...
    Trash these files...
    /Users/YourUserName/Library/Mail/... MessageRules.plist and MessageRules.plist.backup
    Then if need be with the backup, Import emlx to mbox, See if this helps...
    http://www.cosmicsoft.net/emlxconvert.html

  • What is that circle that keeps going around and around

    What is that circle that keeps going around and around.  I keep getting it when I try to open my email.  It takes forever for it to go away

    That  sounds like the spinning beach ball and indicates your computer is busy. This can be caused by many things, I'd recommend reading the XLabs article about it, you can find that at:
    http://www.thexlab.com/faqs/sbbod.html

Maybe you are looking for

  • HT204053 Multiple ID's - change into one?

    I have a MobileMe/iCloud ID and also a separate Apple ID. How can I change them so that I only have one ID for both iCloud and Apple ID - for accessing iTune and ourchasing Apps?

  • Table.Sort only sorting records in preview pane

    I have the following M query: let     OrgIdParameter = Excel.CurrentWorkbook(){[Name="ClientFilter"]}[Content],     OrgIdValue = OrgIdParameter{0}[Column2],     Source = Sql.Database("JOHNSQLD53", "EnterpriseAnalytics"),     dbo_vFactEngrgServiceLocM

  • Recordset -  Show ID content only once on page?

    Hey all, I want to be able to supply a 'other headlines' section on my main page... I already have a section that displays the latest headline and article summary....so I don't want that leatest headline to appear in the headlines section as its alre

  • Suggestion needed, URGENT

    My shuffle as i said earlier has the same 'orange and green' lights issue, iam ready to return it, but how do i go about it? i live in new delhi, india...i purchased this from singapore. Please help me, thank u very much.

  • Delete Request of PSA

    Hi, I would like to delete a request of the PSA. in BW 3.5 I could do this via rsa1 with modelling. Now in BI 7.0 I don't finde something to delete a request completely from PSA. could somebody help me please? Thank you in advance, Kind Regards Manue