Outbound audio fades out during phone conversations on an iPhone 5 - frequent complaints from almost everyone I speak with.

When on a call on an iPhone 5, the person on the other end of the line frequently complains that they have "lost me" and they can't hear anything I'm saying. The inbound audio on my end sounds fine. Any reports of microphone or other issues on the iPhone 5?
The complaints don't appear to be related to any particular call circumstance (inbound vs outbound, land line vs another cell phone, different carriers) - appears to happen in all situations.

You might want to talk with Apple Support or go to the Apple Store, as this could be a device issue. However, it's likely an iOS 7 software issue, or the simple fact that your iPhone is getting "older". I have an iPod touch 5 (same year and software as your iPhone), and I have noticed the decline of my device.

Similar Messages

IPhone suddenly no sound during phone conversation! Help!

Hi all,
Recently my iPhone suddenly no sound during phone conversation, can't hear any sound from the other side. However if i choose 'handfree' during call engaging then it's ok for external speaker. Also listening music is ok...
Also I obsevered that the light-sensor won't blank the screen. Is it hardware issue so that I have to send to Apple for repair?
Please help!! Thanks.
Regards,

Fixed..refer to some old post. Re-insert headphone plug several times and solved.

Iphone 4 wakes up during phone conversation

I've had my ip4 for about a week now and I keeping muting or dialing numbers with my ear during phone conversations because the phone wakes up while I have it against my ear. Is there a setting or fix to this?

Im Having The Same Problem. I Bought A Griffin Outfit Ice Case And It Seems To Have Helped, But Thats Not The Point..

Fade In / Fade Out during CurrentState Transition

Hi,
How is it possible to have elements to be fade in / fade out during the transition of currentstate? Thanks.

Hi,
Check this example.
http://adobe-center.net/devnet/flex/quickstarts/defining_state_transitions.html
It uses Resize effect with some filters. You can use the same technique to get the Fade effect

Screen Blanking Out During Phone Calls - Solution

Previously I noticed many posters complaining about a problem with their iPhone screen blacking out during phone calls. I think I may have found the solution, or at least a solution. I have been advised by the Apple Store technicians that the case I use (and indeed, many cases that are sold in the Apple Store), are so opaque that they block the sensor found near the earpiece. This is the sensor that tells the iPhone screen to black out when it is next to your ear, and to light up when it is away from your ear. Because it cannot sense through the case, it still thinks it is next to your ear and hence keeps the screen blacked out. And sure enough, when I took my iPhone out of the case, the problem disappeared.
Now here is the question - has anyone got experience with a good case that does not cause the above problem? And those who do have a problem case - have you been able to return or exchange it with the manufacturer?

You have this product - which is specifically designed for the iPhone 3G?
http://www.iskin.com/revo2_features.html
This is the case I've used with my iPhone 3G for the last 6 months or so with no problem.
There is an iSkin Revo for the first generation iPhone, which is not designed for the iPhone 3G since the proximity sensor and light sensor with the iPhone 3G are in a different location than the location for these sensors with the first generation iPhone.

Editing audio, Fade Out Problems!

Hi I've imported an mp3 into iMovie to run alongside a movie. How do I remove the fade out all together so that it runs the whole track? I don't want to fade the track out, have already gone into audio editing panel. Any ideas?

citybloc,
I have not done any audio editing in iMovie 08, only in iMovie HD. In the 08 application I made my audio edits in GarageBand. You have pretty good control of it there.

Multiple Sound fade outs during slideshow on a burned DVD

Using iDVD, I created a slideshow, from an iPhoto album.
I added music from my iTunes library.
I tried it on the screen, and it worked great.
Then I burned my DVD, and tried it on my TV set with a DVD player connected to it.
It works OK, except that at each slide change, during the transition, there is a sound fade out.
Then the music continues, to the "normal" sound level.
I did it twice.
One DVD burned with the slide timing forced to 5 seconds, and once with the automatic timing, that choses the timing based on the music duration.
Same result : Sound level fluctuation (fade out/fade in)
Anyone knows the solution

Do you have more than 99 photos in this slideshow? There is an issue similar to what you described when this is the case. I also wouldn't rule out music purchased from iTunes.
Here are two suggestions.
1. If you do have more than 99 photos, create your slideshow in iPhoto, and export it as a QuickTime movie. Then drag the movie icon into the DVD window; be sure to avoid the drop zones. Complete your project in iDVD.
2. Burn the music you purchased to a CD, and reimport as an AIFF file. iTunes>Preferences>Advanced>Importing>Import using: (drop down menu) AIFF encoder
Before you actually burn another DVD, first save as a disk image. This will allow you to view the project on your computer using the DVD player. You can catch any errors and correct them before burning the DVD.
I hope this helps.

Audio Cuts Out During Slideshow Transitions

Hi-
In my iDVD6 slideshow I have embedded audio. It cuts out during each transition. Do I have to not use transitions to keep that from happening?
Are there some transitions that don't make the audio cut out, or is it something else entirely? Thanks for any insights!
-Ranger

MacinTouch has a good discussion of this issue here:
http://www.macintouch.com/readerreports/idvd/topic2244.html
Besides making the slide show in iMovie, one poster at MacinTouch said he had always had success with DVD playback if he created the slideshow in Photo to Movie:
http://lqgraphics.com/software/phototomovie.php.
I just had this same problem with my very first iDVD. The problem does not appear to be with iDVD, but rather with DVD players that do not fully support the DVD spec or have large enough playback buffers. I found a little more insight here:
http://www.aidinc.com/features/dvdfaq.asp
I tried the disc I burned from iDVD in 2 different physical players and also in Tiger's DVD Player app. The disc works perfectly played back from computer. It played with just a slight bit of audio stutter on a 5 year old, under $100 Go player but with lots of stutter and even stutter on menu transitions in a 2 year old $250 Samsung DVD recorder.
I want to try burning the project from a disk image in Disk Utility using a slower burn speed but have not yet tried that.
My slideshow is pictures of a recent visit to relatives who are die-hard PC users. Unfortunately, I bragged to them about my Mac and promised to send them DVDs. Hope the discs will playback okay on their machines.
Hope this helps and Merry Christmas!
Paul

Audio fade out not working

I've imported clips from my camera to iMovie HD 6 and created a 2 minute "movie." I imported a song from iTunes but want it to fade out before the movie ends. I've followed the instructions and dragged the volume bar down where I'd like the fade out to happen but nothing changes. I've also extracted audio from the clips I'd like to play without music but nothing changes. The audio also plays past the end of the last clip. I also followed the instructions to delete the audio from selected clips by placing the cursor in the audio bar and waiting for it cursor to change form into that t-bar shape but it doesn't happen. I've closed out and re-opened the project more than once. Following the instructions was easy but there are simply no results. What am I missing? Thanks!

Hey, catspaw!
You remembered! My family history project now is complete from 1979-2008, with 2009 being compiled on an ongoing basis as I get the photos and videos.
I have nearly all the old photos scanned into iPhoto for both my husband's and my side of our family. There are only a couple of videos of our parents talking about their childhoods or some specific childhood memories, and one of my father-in-law telling of his days in the Navy in WW II, when he was one of the first Americans to go into Nagasaki.
I had all the photos scanned in already, but when the drive failed several months ago, I apparently lost a few of the photos. So my fil will need to lend his to me again. I also have some baby photos that my parents insisted they did not have, but they did, so I will be getting them next week.
Then, I have about 2000 slides that I'd like to put into this collection. It is easy to scan them, and I have already done about 400, but the ones from a couple of trips are just going to take too much time, so I found a local photo place that will scan them for me and put them onto a CD.....and they charge less than anyone else I have found. The draw for me is that they do it locally so I do not have to worry about the original slides getting lost. I am planning to take the slides in tomorrow or Monday. I think it will take them about a week or so.
I have 4 iMovies in progress for the 'old' photos. After I get all of them finished, I think I will upgrade to Leopard and install iLife 09 and begin to play around with iMovie 9. The big concern for me is that it does not allow exporting back to camcorder. I really like to do that with my edited movies so that I have a nice digital tape of the finished movie. Since I now will have to do only one family movie/photo project per year, I will have time to make little creative movies for the grandkids. I may even take some classes.
I have also thought about using Final Cut. I have FCE, not Pro, probably enough for my purposes. Ihave used it a couple of times for short movies. It has quite a learning curve, and it is not so helpful as iMovie since nothing is preset. Of course, it gives one great flexibility. I think that doing a few movies will give me experience enough to consider making the switch for the family movies, and maybe using iM9 for the short ones.
I have been following with interest the posts regarding getting the best quality from iM9 when putting it into DVD, and I have been learning a lot. Very thankful for these discussions.
Also, my camcorder is getting older and I am considering getting an HD camcorder; still have to think about whether I want to continue with tapes or not.....
I know that FCE and FCP take footage in DV format, so the DV tapes would be easy.
What do you think?
Return greetings from here....we are going to see some friends next weekend who have lived in the US for many years, but are from Adelaide!

Audio Fad Out not working ??

Dear all,
I've been working on a nice project for a while, and now for some reason, when I select an audio track and the audio button to get the advanced audio features, even though the "fad out" option is selected and manually increased to 2s, this has absolutely no effect while viewing the video. The audio track just doesn't have any fad out.
The tricky thing is that it works for some of them at the beginning of my project (the first 10min), but not for the others....
Any idea ?
Thanks
I'm using imovie 7.1.2.

My project is plenty of "adjacent" sounds, it's a slideshow with some musics coming from itunes.
I tried what you suggested, ie put some clips in between without any fade options but it does not make any difference.
On thing I have noticed, before rendering the project, I have a warning message saying that an event called "unknown album" was not found and would be replace by some black pictures.
What does it mean? There is of course (would be too easy...) no black pictures while playing the final movie. Could be linked right?
Any idea?

IMovie 9.0.2 - audio fade out doesn't work

Has anyone found any working solution to "fade out" not working? Before movie rendering all is OK, but in rendered movies there's no audo "fade out" - the audio just stops.
Frustraiting!
Regards,
Gitarzysta

Christil
Premiere Elements 9 on Windows 7 64 bit (are you working from the 9.0.1 Update?)
Are you referring to the fade in fade out video audio shortcuts?
How are you doing what you refer to as "Complex Fades Work"?
I am not aware of any hardware acceleration control in any Premiere Elements options related
to Fades issues.
Please review the following related to the Fades shortcuts and see if any of it applies to your
situation.
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html
Is your issue specific to one particular project? Is this a "it worked before but not now" or "it never
worked before" type matter? Pending further details, we might consider deleting the Adobe
Premiere Elements Prefs file or, if necessary, the whole 9.0 Folder in which it exists.
But, we will await further details from you before deciding what next.
Thank you.
ATR

Audio fades out automatically after 15 minutes although not muted

Hi
While listening to iTunes, the music fades out automatically after 12-15 minutes, also system sounds won't play anymore. All settings are set correctly (internal speakers, volume), the iMac is not muted.
After some time switch off or in sleep mode, it plays the sounds again, but after 12-15min, it's quiet again.
Any idea ?
Thanks
Eric

It was bought online through a third party retailer, so its not exactly as convenient as driving to the store. I'd rather exhaust my options before having to send it back.

Audio goes out of sync when Blu-ray folder is exported from Encore CS6

I compile a project in Encore using H.264 and .wav files. The audio plays fine directly from the timeline. It also plays fine when I preview it from Encore. When I finally export it as a set of Blu-ray folders, the audio exports out of sync with the video. It is approximately 6-7 seconds ahead of the video. What am I doing incorrectly? When I mux the files into an .MKV, the video is in sync with the audio so I know the files themselves do not have different start times.
I am running with an HP Z820 with Windows 7, 64-bit OS and 16GB RAM.

For anyone who's interested, I found a solution to this problem. Once imported into Encore, the leader in on the video and audio files cannot be trimmed at all. (I had been trimming the beginning of the video and matching audio file to eliminate the 8 seconds of dead space at the start of the clips.) Although the trim took effect immediately in the Encore timeline and I could also watch it in preview in sync, exporting was another story. The audio track seems to retain the trim when exporting but the video track does not, hence the 6-7 second delay between audio and video.
I reimported the files to my project and left in the 8 seconds of dead space at the start and voila! The video and audio match up when exported.
Ideally the trim tool would just work as its supposed to through export and all, but at least I found a solution I can work with.
(As a note, the trim works just fine in export on Encore CS5. I only had this problem with Encore CS6.)

Is it possible to record a phone conversation on my iphone 5s?

Is it possible to record a phone conversation with my iPhone 5s and how?

Not that I know of. There is no setting on the phone for it. I looked for an app once and could not find one either

I cannot hear when people speak to me during a call on my iphone 5, i cannot hear when people speak to me during a call on my iphone 5

during phone calls the person speaking to me is very quiet although they can hear me clearly

Hey, so i went to the apple store yesterday and explained the issue i had with a Genious there, She did a few tests to see if she could reproduce the issue (tried calling my phone) which produced the issue every try Lol.
We took a look at my account and she said that i was 20 days past warranty but since its only 22 days she would just ignore it and give me a replacement phone.
So if this happens to anyone else just book an appoitment with your closest Apple store and if you are in warranty or a few days out of warranty (in some cases) they will just give you a replacement phone without asking any questions.
If you dont have warranty and are past your warranty date by like a month or two they wont do the free replacement and instead you will have to pay 230$ for a replacement phone (thank god i didnt have to pay that LoL)

Outbound audio fades out during phone conversations on an iPhone 5 - frequent complaints from almost everyone I speak with.

Similar Messages

Maybe you are looking for