Outbound calls doesn't display the DID number ?

hi all,
Q1.) With refer to belows, I hope the "Calling Party Number i = 0x0081, '33800' " should appear '8883800' ?
Q2.) I hope my mobilephone will display 8883800 instead of just the extension number 33800 as you seen belows.
Any idea how to do that? please advise. thank you very much.
Here's the sample debug isdn q931
*Jul 23 06:09:37.733: ISDN Se1/1:15 Q931: TX -> SETUP pd = 8 callref = 0x03A9
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98382
Exclusive, Channel 2
Display i = 'Spsn IT Regional Helpdesk'
Calling Party Number i = 0x0081, '33800'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '0125667835'
Plan:Unknown, Type:Unknown

Are you saying that the external phone number mask was configured or asking how to configure it? You can configure the mask by:
1. Go to https://ccm ip address/ccmadmin
2. Go to Device -> Phone
3. Find the phone that you want to change
4. Click the phone and then click the DN
5. Enter a value for External Phone Number Mask
Also, are you saying that "Use Calling Party's External Phone Number Mask" was already checked on your route patterns?
Brandon

Similar Messages

Some incoming calls and messages display the phone number instead of name

I recently upgraded from a Blackberry to an iPhone 4s. When I receive a call or SMS on the 4s it often displays only the phone number instead of the name at the top of the screen even though I the correct name and phone number are entered the correct fields in the iPhone address book. I assume there was some kind of conflict when I imported the names from the blackberry (or from my Google contacts list - I can't remember which now). Have any of you experienced this problem? How did you get it resolved?

Umm,
I cannot replicate this.
If I deliberately send to my iPhone Number and reply to that (My iPhone is set to use the iPhone Number) after I have moved Messages behind another app the Notification show my Name and not the number.
I am using iCloud to sync the Contacts apps.
8:25 pm Monday; April 20, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT2452 My iMac was stolen the receipt doesn't have the serial number but I did register the computer when I purchased it how do I get the serial number

My iMac was stolen the receipt doesn't have the serial number but I did register the computer so Aplle must have a record of it. How do I get it.

Go to the Apple website and your support profile. It should list that iMac and the serial number for it. You'll need your Apple ID and password for that Apple ID.

Incoming calls no longer display the Contact name

Since flashing my phone to update to PR1.2, any time I get a phone call from someone who is in my Contacts, it just displays the telephone number, which can cause an issue if I don't recognise it at first glance.
Any ideas what could have caused this and how to resolve? Can it be due to the update?
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

finmoto wrote:
Just a thought but do you have duplicated the names in the address book ?
Nope.
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened. The photo shows in the Navigator on the side panel, but not on the screen. MFF

After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

No, that is the problem. I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2. The upgrade then required that the Library be upgraded. Then CS2 stopped showing the photo when I opened CS2. Maybe there was a system upgrade for the whole system, that went along with 9.2. Before the upgrade CS2 worked. I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock. These photos were not on my computer when the Library was upgraded. I even tried photos fresh from the camera. Elements 9 does work to open the photos.

Re: my notebook doesn't display the red color

I think I have the same or a similar problem. I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
Since updating the graphics driver last week I have noticed the colour red seems more pink or purple. This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour. I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
I have attempted to rectify the problem by resetting the display settings to default.
This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

Hello @pittstop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My iphone 4 music player doesn't display the arabic songs names ?

My iphone 4 music player doesn't display the ARABIC songs names ?

ok i found the solution here by deleting the corrupted library
http://portablevideo.blogspot.com/2008/12/music-player-database-problems.html
now one of these below is for the music and one for the photos and i didnt have a problem with the photos but did it anyways and now the player can see my music:
these are the files that need deleting in order to get rid of the corrupted library.
Storage Drives: (Mass storage E, Memory Card F)
\private\101ffca9\harvesterdbvx_x.dat
\private\10281e17\[string]mpxvx_x.db
\private\10281e17\[string]pcvx_x.db
TIP: Connect the device in USB mass storage mode (File Transfer), to locate the private folder from the PC.
TIP: STRING and x_x will change depending on your phone. (my files had slightly different names than above on the n97)

Report for displaying the order number & order date..

HI ALL,
can any body help me for displaying the order number,customer name,material name & order date..in report
i dnt know the which are the table i need to use...
can anybody tell me which are table do i need to use and fields in tables
input to report from the user are cutomer number,purchase order numbervendor number & sales number
waiting for positive reply form u people.....
thanks
Zabeerulla
Moderator message: "spec dumping", please work yourself first on your requirement, do some research, talk to a functional consultant near you.
Edited by: Thomas Zloch on Feb 28, 2011 2:14 PM

Thx dharma raj ...
problem is ,input to report from the user are cutomer number,purchase order number,vendor number & sales number
report should contain
customer name
order date
order #
vendor name
material name
can u please tell me which are the table do i need to use...
i have ,please look into it...let me know if am incorrect
customer name -> kna1_name where kna1_kunnr=knagv_kunnr
order date -> vbak_audat
order nunber->vbak_vbeln
vendor name -> LFA1_NAME where LFA1_LIFNR=MEPO_TOPLINE(superfileld)
material # -> VBAP_ARKTX where VBAP_VBELN=VBAK_VBELN
HELP ME OUT...
THX
ZABEER

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

Display the total number of rows for the report in OBIEE 11g

Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacne

Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

Has Mozilla changed the way Firefox displays @font-face enbeded fonts? The site I'm codeing works in Safari, Chrome, and IE, but Firefox 8.0.1 doesn't display the embeded font.

No problems here with the H1 headers.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

My iphone 6 doesn't display the battery duration values

My iphone 6 doesn't display the battery duration and standby in battery settings, and replaces the values with - even if I completely charged my battery last time. Can someone help me?

Try these two:
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

Bank transfers: the file DME doesn't display the name of the company

Hi all,
In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
Where should I put it?
Thanks

Neeraj,
Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
Regards
Shaun

Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

Some browser doesn't display the MW page correctly

after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?

We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case.

Outbound calls doesn't display the DID number ?

Similar Messages

Maybe you are looking for