Outbound Deliveries not generated.(IS-Retail)

Hi MM Gurus,
Scenario- Stock Transport Orders are created at Store. A collective PO is created at DC referring the STO's. Goods are received at DC as per the collective PO. Deliveries not created automatically.
Additional Information-
Distribution Monitor shows - received qty's are allocated to the STO's. When selecting the error log following message is displayed.
VL150- Only 0 EA of article(XYZ) is available.( But MMBE report shows the stock is more than zero.)
VL367- An item with no delivery qty is not permitted.
Please reply to this query
Thanks

As per your replies,
seems you have done intial ground work to find route cause of the problem, which should solve / find the reason.
But, Still issue is open, hence i suggest you to check in availability overview screen, which one you are selecting,
Here you will find 3 options:-
One-Time delivery (schedule line gets confirmed with the available stock on RDD)
Complete delivery ( sch.line will get confirmed only if system finds complete stock)
Delivery proposal ( where system confirms for available stock & balance qtty, provide estimated next schedule line)
But in all the cases, system should allow to create delivery on or after respective confirmed date, with the qtty same as confirmed qtty.
Regards,
Reazuddin MD

Similar Messages

Unrestricted stock available but outbound delivery not generated

Dear All,
We have continue facing this problem in last 15 days, unrestricted stock available
In location but outbound delivery not generated.
I request you, please help me & solve my problem ASAP.
Regards,
Alok Oberoi

Hi Alok
There are two situations possible.
1. Either the order may be blocked for delivery; which can be removed manually.
2. In unrestricted use, material may be available & it may be displayed. But actuaaly it may be booked for some other orders in advance due to delivery priority. this can be checked using t- code md04

Outbound Messages not generating on Published

I tried publishing a PO Confirmation and a Save + Send a Scheduling Agreement Confirmation from the Supplier view. However no outbound xml messages were generated.
I have been reading posts of activating the Badis but in another proejct that we recently implemented, we did not have to implement any Bad for RON or ROC.
Is there any other config or scheduling or queue setup required on the SNC side to trigger these messages?
Nothing shows up on sxmb_moni
K

Hi,
Activate validation check SCONF_PUBLISH_DIRECT for validation profile=SCN3.
Path:SPRO>Supply Network Collaboration>Basic setting --> Validation >Own settings>Maintain setting for validation profile
Enter validation profile=SCN3,validation check=SCONF_PUBLISH_DIRECT and save the settings.
Now try to publish schedule agreement confirmation.
Regards,
Nikhil

Is there any t.code for getting list of deliveries not yet invoiced?

Hi,
Is there any t.code or report where we can get the list of outbound deliveries not yet invoiced, and also the value for how much it will be invoiced.
For example, I have one order with net price as 100, and it has outbound delivery created and not yet invoiced. I want a list of those deliveries with the net price of the quantity delivered.
Do anybody have any idea on this ?
Thanks
Surya

Hi All,
In VF04 and VL06F we will get list of outbound deliveries, but I want the information in such a way that if that delivery is invoiced for how much value it will be invoiced? so, the list should contain the delivery number the value for how much the invoice will be created.
Thanks
Chandramouli

Goods Receipt is not completed but Outbound deliveries are getting create.

Hi,
I have a Cross Dock issue.
In cross dock scenario, after completing inbound process, outbound delivery needs to process.
in our case there is batch job running in the background, which is creating Outbound deliveries without completing the Inbound process.
This should not happen. Customer getting confused with this process,
process as follows:
SO-> PR-> PO-> Inbound delivery-> MIGO.
then we go to VL10C and create the Outbound delivery.
i check the availability check at delivery level, all setting are correct.
Please letme know what setting needs to be done for this, to restrict this process.
We need output like, 1st GR needs to be done , then using VL10C, outbound deliveries needs to create.
awating for your help.
Br,
Hari.

Hi...Krishna,
Can you explain the process for Inbound delivery creation.
Rgds

VL06O Outbound Deliveries report Not Displaying Reversals

Hi Experts,
Can somebody help me to advise if its a standard behavior of SAP or a design flaw , that in Tcode Vl06O reversed deliveries are not being displayed in the report.
If a delivery is reversed in a subsequent month to the original delivery, the delivery disappears from report
For Example, say we created Order & delivered last Nov , checking the report then it would be correct
But when the same delivery is reversal in the following Month , instead of a negative despatch being displayed in Nov, the report actually deletes the Delivery When we check again the Nov report.
Please advise.
Thanks alot in advance.
Regards,
Grace

Dear Grace,
As I understand your problem is that SAP doesn't display the reversed delivery in VL06O.
I tested:
1. Delivery created and GI posted in 12/2008
2. GI reversed in 01/2009 (VL09)
3. VL06O > "List Outbound Deliveries" > I can see the delivery, no prolem.
VL06O delivery report is not the same as MB51 goods movement report. It doesn't report goods movement it is a report about deliveries. It doesn't matter what has happened to the delivery, it will display the delivery only in one line (once) - even though GI has been posted hundred times and reversed hundred times.
Or is your problem that SAP doesn't display the delivery in this report at all? My experience is not that, the mentioned delivery was in the report.
If the delivery is not in your report, please check:
1. Filter criteria in VL06O > "List OD" report
2. Please also check in VL03N whether the delivery exists at all (maybe someone deleted it - in this case no wonder if you don't get it in the report)
Regards,
Csaba
Edited by: Csaba Szommer on Jan 18, 2009 10:40 AM

VL06O - OBD monitor - Deliveries not seen in "List outbound deliveries"

Hi All
I've a strange issue. In VL06O - OBD monitor I used option "List outbound deliveries" to view deliveries for which PGI is already completed, however I do not get any deliveries in the list.
I'm using the standard display variant: "SAP&STANDARD".
Removed all dates and did not enter anythiing in the screen except the delivery note number.
Why a I not getting the delivery in the list? Any ideas, what am I doing wrong?
Thanks in advance.
Regards/Rajesh

Just try without variant.
In the selection screen, input some values for example, sales area/shpping point/created on (for example >01/01/2010)) and total goods movement status as C.
The system will show the deliveries that are already goods issued.
You may also refer OSS 1459217 - Performance Issues with Transaction VL06G (Collective Goods Issue of Deliveries) / VL06O
Regards

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
    GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
    REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
    REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
    REPLACE '&' WITH GS-COUNT            INTO GS-TEXT.
    REPLACE '&' WITH GS-LINES            INTO GS-TEXT.
    CONDENSE GS-TEXT.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
         EXPORTING
              MATNR        = <MATNR_WERKS>-MATNR
              WERKS        = <MATNR_WERKS>-WERKS
              MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
    GS-COMMIT = GS-COMMIT + 1.
    IF GS-COMMIT >= 100.
      GS-COMMIT = 0.
      COMMIT WORK.
    ENDIF

PO No. Not Available in T-Code VL06F (List Of outbound deliveries)

Hi Team,
I was checking list of outbound deliveries in T-Code VL06F (List Of outbound deliveries) here.
1. PO no. coming as Sales order no. only so how to bring PO no. from sales order to delivery please Guide.
please find attached doc. here.
2. What are the settings required for this
Thanks
YRHSP

Hi SP,
System will populate Purchase document value either as Sales order number (VBAP-VBELN) or Purchase order number (EKPO-EBELN)
This is standard code put
there is no configuration for this
you have to make code changes specific to your requirement
There is an enhancement point where you can try
FELDAUSWAHL_SONDERREGELN_05 SPOTS ES_SAPMV50A
check with your developer on feasibility of this enhancement
thanks
santosh

MRP is not generating any schedule line in my vendor's scheduling agreement

Hello all,
My question is: why the MRP is not generating any new line in my vendor's scheduling agreement?
This is the scenario:
I have created a vendor's scheduling agreement with transaction ME31L
I have created a customer's scheduling agreement with transaction VA31 and those characteristics:
- Forecast scheduling lines
- JIT scheduling lines
- MRP to DS type assigned to type C: Requirements according to forecast delivery/Deliveries according to JIT
I have run MRP with transaction MD01
MRP is generating some purchasing requistions, not purchase orders because we have set up a release strategy which requires 2 approvals, but those purchasing requests are not generating any new line in the vendor's scheduling agreement.
Any idea why it could be? Please do not hesitate to ask for further explanations. Thank you

Hi,
Check if stock is available for the material in that plant.
Also check the requirement date for the material and compare it with the planning horizon for that plant.
Check your material master MRP view.
Create source list(for material and plant in question) with MRP indicator 2.
Thanks and Regards,
Maheshwari

Stock Transfer from one location to another through outbound deliveries

Dear GURUS n EXPERTS,
We have 5 warehouse and one manufacturing plant. Till this time we use two step Stock Transfer method to transferring stock from plant to ware houses.
Now, we want to use Shipping & Transportation System to to calculate transportation cost. But this system consider only outbound deliveries. So, our requirement is:
1. Create the outbound deliveries, but no billing.
2. Receive the material at warehouse against this outbound delivery but do not go for invoice booking.
How can we achieve it. Please guide us.
Thanks,
DSC

Hello,
You may see the IMG path SPRO->Materials Management->purchasing->Purchase Order->Setup Stock Transport Order. Here, the most important ones are Assign Delivery Type and Assign Purchasing Document Type. Availability check, Delivery tolerances etc. are optional. You need shipping point to be created using transaction OVLZ.
Thanks,
Venu

Delete Outbound deliveries at a mass level

Dear Friend,
Is there any transaction code where i can collectively delete 30 to 40 Outbound deliveries in
one go.
Best Regards,
Gurpreet Singh Saini.

Hi,
Check the forum link
[Mass Deletion of deliveries|Re: Collective deletion of Outbound deliveries (PGI not done)]
Regards,

Partner Profile not Generated

hi! all
Generating the Partner Profile Using BD64
while generating received the message in Green for parameters: Partner (Sender, Receiver); Port (Zport); Outbound Parameter(Zsender).
while checking in WE20 - Partner Profile ; Profile has been generated for the Reciver System with the created message type and port in Outbound parameter. But not generates the Inbound parameter.
As like Profile has not generated for the Sender system.
While testing the idoc using WE19 it says Profile not generated for Sender system
whats the mistake i have done. How to correct it.
Regards,
Kv

Hello,
The distribution model view for which you are generating the partner profile (PP) check the sending & receiving logical systems (LS).
if you want to generate the PP with inbound params you have to assign the your own LS as the receiver & not the sender.
BR,
Suhas
PS: If this bothers you too much maintain the inbound params manually in WE20

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

SRM XI standard content ...SRM Server 7.0 - Outbound proxy not working

Hello All,
we have integrated SRM SUS with ECC 6.0 using XI standard content XI SRMSERVER IC 7.0. With same configuration, Purchase Order has been send from ECC to SUS and PO is created successfully in SRM SUS. But, while confirming the purchase order, its not generating outbound proxy message.
And when we check the interface PurchaseOrderConfirmation_Out(i.e dobule clicking) in SPROXY transaction of SRM SUS, getting the following LOG:
1. Logical port template is inconsistent, regenerate it and activate it
2. cannot create LPT without DT profiles
3. Regernate proxy(inactive version incorrect)
Let me know if you have any suggestions.
Regards,
Sreenivas.

Hello Srinivas,
1.Check your Port creation from ECC to XI 2 SRM.
2. Activate your proxies properly and check whethar your proxy communication working properly or not.
check this links for your reference.
MM -XI-SUS
MM System - XI - SUS
MM-XI
How to integrate MM using XI
SRM-XI
SRM and XI Integration
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
SRM and XI
Is there pre-configured message mapping for SRM Content?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
SRM XI scenario
Which version of SRM needs XI?
SRM AND SAP XI
XI with SRM 4.0
Regards,
Mahesh

Outbound Deliveries not generated.(IS-Retail)

Similar Messages

Maybe you are looking for