Outbound Delivery and Storage Location
hey everybody,
this is our status quo:
we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
we need a solution for our new scenario:
in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
here are the steps:
1. outbound delivery creation
2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
3. the packer is packing the material physical and within SAP in the new created handling units
4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
does anyone has an idea for us?
another information: we don't want to do the material movement manually
best regards & TIA
chris
Dear,
As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
If it has to be done, you need to update the "Outbound delivery" with new storage location before posting the goods issue.
Is there any business advantage with this new process,If so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
Details as Follows:
Step-1:
While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
Step-2:
Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
Step:3
Then do "Post goods issue".
Regards,
pardhu
Similar Messages
-
MIGO - Goods Receipt against Outbound Delivery - Default Storage location
Hi All,
We have a Plant A001 and 2 Storage locations B001 and C001.
Recently we added a new Storage location D001.
Moving forward we would like to have all goods receipts to be posted to the new Storage location D001.
What are the steps involved so that the GR postings will be done with the new Storage location ?
Please advise.
Meghnaplease try this
Out Bound delivery: storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Picking
Determine Picking Location
Assign Picking Locations
Inbound deliver storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Assign Goods Receiving Points for Inbound Deliveries -
SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY
i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha -
Material transfers between plants and storage locations report
Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards -
How to get automatic plant and shipping point and storage location
hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.tHi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx. -
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK -
Stock report in BW (valuated stock and Storage Location level)
Dear All,
Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 : R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the Oss Note (589024)...........
Manythanks
ArunHI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun -
Sales order stock and storage location stock on past date with value
Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value
-
Plant and Storage Location determination at Item level during Copy control
Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup BansalHello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh -
Outbound delivery and pgi without sufficent stock
Hi,
I would like to know few things regarding.
1. Can we process outbound delivery and PGI without having sufficent stock.
2.if yes than what will be the status of document flow.(when i did it system showed following message, sales order-being processed,outbound delivery-being processed, and conformaton of service-completed.
3.if we can not do pgi and delivery without sufficent stock than what is alternative for the same.
Kindly reply as soon as possible.
Thnaks
Rahul1) Yes. It is based on your item category like TAX, you can post the goods issue and system will not check for stock availability. It is also subject to other parameters like
a) ticking the Negative stock field in material master
b) ticking the box for your Valuation area in OMJ1 etc
2) As I said above, if you use item category TAX and do PGI, then in document flow, you can see Confirmation of Service against this delivery document
3) Stock should be made available
thanks
G. Lakshmipathi -
During MRP run unwanted plant and storage location include and exclude
Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. 1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as. space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not. You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK -
Link between outbound delivery and matriel documents of good receip
HI,
in which table we can find the link between outbound delivery and matriel documents of good receipt.
thanksHi!,
If you have posted a goods receipt for an outbound delivery, you should find in the header table MKPF for the material document the field MKPF-XBLNR completed with the outbound delivery number.
Then, if the document flow for the delivery has been updated correctly, in the table VBFA for the delivery (VBFA-VBELV), you should find the material document under VBFA-VBELN.
I hope this helps you!
Best regards,
Esther. -
Mandatory the Material Quantity and Storage Location Field in Order
Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best RegardsHello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh -
MB5B Movment type and storage location is reset
When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Please tell me why does this happen when the radio button "valuated Stock" is active ?Dear All,
I am facing the problem as said in the thread.
My two queries are as follows:
Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
M7284 - Storage location is reset.
M7298 - Movement type is reset .
Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
ie have received material = 100 Nos 01-12-2009
cancelled grn:100 Nos
Redo grn:100 Nos
Done transfer posting 415 Q = 10 nOS = 02-12-2009
Issued = 10 nos = 02-12-2009
In mB5B 01-12-2009 to 02-12-2009
We are getting Opening stock= 0 which is correct
Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
Closing stock = 90(CORRECT)
Here actual recipt: should be 100
actual issue should be 10
Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
Please give your valuable suggestions to the above two problems seperately.
Regards, -
Default Plant and storage location for components in MFBF
Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
MurugesanHi MURUGESAN !
Can you give me some information more in Special Procument Configure in plant 2000 like:
- Procurement type (maybe F)
- Special procurement (Maybe U)
- Plant (Maybe 1000).
- Issuing plant (maybe 2000)
We will check together.
Regards,
Tony
Maybe you are looking for
-
Want to create a type at runtime
Hi all , I am trying to create a type at run time within my scheme by making use of a table loop. [code] Report test_data. data : llv_imp type table of RSIMP, gt_imp_par type string occurs 0. Field-Symbols : <fs_imp_par> like RSIMP, <
-
One t.o. fixed bin replenishment
Hello, and good day I have a question about replenishing fixed bins. We currenty use two step with TR-TO mirror TR-TO creation automated via batch job and it's working fine. The issue is that the replenishments are slowed to much waiting for the seco
-
Hello!I wish to write the program allowing to read and write abf files. For this purpose on a site http://www.moleculardevices.com/home.html has downloaded library dll - Axabffio32.dll. The problem following - how with Call Library Function Node to d
-
I connected up my eprint and have a address for it. I sent a photo to the printer. Where do I find the photo to print it? This question was solved. View Solution.
-
Verity Multilanguage Locale Not Stemming
I am not able to get stemming to work with my collections that are in unicode. Everything else seems fine but whenever I search on something like choice, it only returns choice and not choices as well. I redid the collections using englishx and the s