Outbound Delivery created between two different Storage Bins

Dear Guru ,
Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
Thanks

Hi,
Between storage bins only transfer posting is possible as per my understanding.

Similar Messages

  • I would like the share an iTunes library between two different accounts on one Mac. How do I do this?

    iTunes no longer works properly (aka at all) while using one of the user accounts set up on my iMac. It does, however, work when logging in under another user account on the same iMac. (if any of you can help me solve this issue that would be perfect). If there is no solution can anyone help with my request to share an iTunes library between two different accounts on one Mac. How do I do this?

    jc_hering wrote:
    that works for anything he purchases after he creates the new account.  What about his current music that currently resides in my itunes library?  How can I get his current music out of my library into his new account/library??  Thanks..
    Copy it to his computer into his iTunes library and authorize his computer with the iTunes account used to purchase them..
    You cannot tranfser items from one iTunes account to another. Purchased items remain part of the iTunes account is was purchased with.
    iTunes account - used to purchase items
    iTunes library - where purchases (and CD RIPs) go on the computer

  • Swap between two different item categories in sales orders for sub-contracting

    Dear gurus,
    my requirement is to have the ability to swap between two different item categories for sales orders for sub-contracting.
    This should be controlled by a combination of the material and a value maintained the Usage field in the Customer Material Info Record (for example by entering a ‘V’).  A combination of Sales Doc Type, Item Cat Group and Usage should result in the creation of a purchase requisition.
    In the event that a process order is required instead of a purchase requisition (i.e. the product is to be manufactured in-house instead of sub-contracted) the user must have the ability to change the Item Category within the sales order to produce a process order.
    The user would just change the item category within the sales order, and the system would automatically remove the purchase requisition assigned to the SO, and create a process order and assign it to the SO.
    Can you suggest any possible solution?
    Thank you in advance.

    Hi Majlo,
    In my system, I checked.  First created sales order with third party line item and then changed item category to normal item category.
    Till Purchase order not created, I can change Item category of my sales order line item.
    In this case SAP inform by log and once save delete purchase requisition of that line item .
    For this you need to assign another item category as an manual item category in SPRO Item category assignment.
    After this user can manually change item category to other one manually, if PO do not exist.
    Please let me know if your query is different.
    Regards

  • Sale of same material from two different storage loactions

    hi,
    how can i configure to sale same material code from two different storage loactions?
    for eg if material code is 15000 and it is extended in two storage location A and B.My requiremnet is i want to sale from both storage loction at same time A and B both.How can i map it?
    thanks
    Nakul

    Dear Nakul Raj,
    If you want to sale same material from different storage locations it can be done.
    First raise the sales order enter the material code and quantity as a first line item and give the storage location "A" in item shipping tab.
    Then give the same material code and quantity (how much you want to send) as a second line item with storage location "B".
    Then save the document, do the delivery, the storage locations will be copied from order to delivery, if you want to change you can do so.
    Do the PGI.
    Hope it will resolve your issue.
    Please reply if any further clarifications
    Kindly try and let me know the result
    Thanks&Regards
    Raghu.k

  • Migration of orginals between two KPro storage systems

    Hi Friends
    I have created a document and checked in the originals into Storage category - SAP-SYSTEM (DMS_C1_ST-Default storage DMS (main files)).I have checked "Use KPro" configuration in "Define document type". Now, I need to migrate this originals into a fileshare system, which i have created as a new storage category(ZNEWDMS).How can I go about?
    I know there is program DMS_KPRO_CONVERT available. But this program migrates documents from DMS storage(Vault, Server, Archive) to KPro storage. My requirement is to migrate the originals between two KPro storages ie From DMS_C1_ST to ZNEWDMS.
    Could anybody help me on this?
    Regards
    S.Sivakumar

    Hi,
    I noticed this thread is a bit old, but I thought I would ask anyways.
    I have the following situation:
    Multiple SAP Instances, each with their own KPRO. A consolidation project to move towards a single SAP Instance. The multiple KPRO's stay as is.
    I am assuming the easiest wat to go about this is to ALE all the metadata of the various SAP instances to the new instance. Would the KPRO links remain intact?
    As part of the consolidation, Objects like materials and equipments have changed, e.g. Material 100 has changed to Material E100. For this I would assume a Bapi to update all the DIR's with the new Objects? This I am hoping would sever the old Object Link and create the new one?
    Any suggestions please.
    Thanks.
    Freddie.

  • Authentication needed after doing trust between two different domains.

    Hi There,
    I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
    ,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
    NY domain can get the users and computers of 2012DC1 
    but 2012DC1 can't get the users and computers of NY
    Date and time are the same,i am always getting this error 
    The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.  
    USER ACTION  
    If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time.  If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
    for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller  capable of servicing the request (for example a writable domain controller).  Otherwise,
    the following steps may be taken to resolve this problem:  
    If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.  
    If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.  
    Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':  
    If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.  
    If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
    Can you please help me in this error.
    Thank You in advance.

    Hello,
    "The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
    This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
    In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
    Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Dates on Outbound Delivery created automatically from STO PO

    Situation: I am creating outbound deliveries automatically after saving a STO PO.  On my STO IDoc PORDCR101 there is a structure E1BPMEPOSCHEDULE.  In this structure there are 4 fields I am entering dates that I would expect to then be used on my automatically created outbound delivery (all fields are different for the purpose of analysis).  These fields are MS_DATE, LOAD_DATE, TP_DATE, and GI_DATE.  I would assume that these translate to Picking, Loading, Transportation Planning, and Planned Goods Issue dates on the processing tab of the Outbound delivery header.  However, the date that I have entered in my Idoc for the delivery date (the date I want the material to be at the expected destination) is being used for all dates. 
    Question: Can anyone tell me if I am using these dates correctly or if there is a different intended use for these fields?  Also if this is not the intended use, is there a separate input field that can be used to control these dates?
    Thanks in advance.

    These 4 date fields can be seen in your purchase order in the schedule tab at item detail.
    They correspond to the delivery.
    But not the way as you expect. they are not there to tell the delivery what dates the delivery shall take. it is the other way around. When the delivery is created then SAP will update the stock transfer  PO with the dates from the delivery.

  • How can I interact between two different frames in the same indesign template as well as from one template to another.

    I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

    There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
    However if you really want to transfer songs to another computer then you could try this;
    * make sure that your ipod is accessible as a disk drive (ipod options)
    * when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
    * go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
    * copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
    * import the files from the folder you made in the last step.
    * Now your music is on itunes, but with unrecogisable names.
    This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
    Generic homebuild PC Windows XP
    Generic homebuild PC   Windows XP  

  • How to transfer app data between two different game center accounts?

    Hello, I really need some help.
    I have looked all over the web for ways to transfer apps between two different game center accounts and different devices. Several weeks ago I started playing Campus Life on my relative's Ipad 2, therefore spending many long hours to get to this point in the game.
    The problem is I just got an Iphone 5 and I really would like to transfer the data onto it, so that I would not need to start all over again.
    My grandma has an account (Game Center) onto which the data has been saved and I would like to have it stored onto mine. On some forum someone said to sign into the account which has the data on both devices and to then open up the game on the new device. It worked. Then I signed out and logged in with my own account- the game started from scratch. I panicked. I went back on the other account, and the data reappeared. I have been going back and forth, the game changing as many times. I thought it would ask to back up my grandma's data on mine but I was wrong. I can not seem to save the game onto my new account, and I have even tried to back it up to Itunes and then copy it onto my phone after having signed into my own account. And I don't know how to properly use Icloud. I am a mess. I am completely lost and have found no help on the web. (All people seem to have to deal with is sharing Apple IDs with different Game Center Accounts for the kids and transferring apps from one of their devices to another.)
    I am so worried I am going to mess up and will lose the whole thing completely.
    I have just started another game with my own account but since I am using my grandma's, the data is erased. It's one or the other but I definitely prefer saving Campus Life. I do not like the idea of having to only pick one.
    I do not know any technical terms, so if you understand or even have the slightest clue about what I am talking about, I applaud you.
    This seems like mission impossible, so if anyone can help in any way, I would be really grateful. 
    Thanks in advance for your time and thoughts!

    I meant to press on "This solved my question"... Sorry if you needed the points.
    Thank-you and I will just go back and forth between the accounts.

  • How to route traffic between two different interfaces

    Hi,
    I need to setup a routing between two different interfaces on a host.
    Inferface ce1 : 192.168.120.12
    Inteface ce2 : 192.168.110.50
    Is it possible to add a route which enables the ce2 interface to catch packets from the ce1 interface ?
    Regards,
    Armin

    The problem is a application which is only able to listen on one interface.
    To fix this, I have to make all packages visible on one interface.

  • How do I Sync my itunes music between two different computers

    Can anyone tell me the step-by-step instructions for how to Sync my itunes music between two different computer.... one Mac at work and a second at home. I want to bring over all my work music onto my home Mac, some of which is the same but much of it is different.

    Are you able to connect the two computers in any way? For instance is the work computer a laptop that you can bring home and network with your personal one? If the two devices are connected in some away there are a few utilities that can help you sync iTunes across different computers. You could begin your research by having a look at these for instance:
    TuneRanger
    SuperSync
    syncOtunes

  • Stock transfer between 2 different storage location

    Hello ,
    Is anybody can help ? We have below scenario :
    Plant : P1 P2
    WH  :   W1 (W1 cross 2 different plants P1 and P2)
    Storage Location : S1 S2 under W1
    We want MRP can trigger the replenishment between 2 different storage location within same warehouse
    but the warehouse is cross 2 plants
    Thanks !

    Dear Denny,
    Pls. maintain following setting which will fulfill your requirement :
    Go to Material Master -> MRP-2 View -> Special procurement type
    40     Stock transfer (proc.from alter.plant)
    Try above & revert in case any doubt.
    Hope this helps.
    Regards,
    Tejas

  • Use of SAP memory to transfer data between two different sessions.

    Hello experts,
    I wish to know how to use SAP memory to transfer data between two different sessions.
    The scenario is that when I run a report and change a variable, the value of changed variable should be availabe to another user on another terminal.
    Thanks & Regards!
    Sumit

    Hello,
    Just to add what Max has already mentioned. IMPORT TO / EXPORT FROM DATABASE statements can be used to store data in special "cluster" tables (you can't use any DDIC table) e.g., INDX.
    @OP: You can opt for Shared Memory(SHM) for this specific requirement as well. In my opinion SHM is a bit tricky to code, but it is easier to monitor. The opposite holds true for "data clusters".
    You should remember SHM is app-server specific. So if you've a load balancing scenario, using SHM can cause problems.
    Hope i'm clear.
    BR,
    Suhas
    Edited by: Suhas Saha on Nov 19, 2010 4:12 PM

  • HT204053 Is it possible to sync calendars between two different users?

    Is it possible to sync calendars between two different users?

    Hi
    Installing the drive into the older machine may work, you WILL get a lot of driver errors and the unit may even fail to boot. The other problem is that the drives may not be compatable, the drive in the broken PC is a SATA drive, older PCs had IDE drives with very different connectors.
    Your best option is to do as you suggest and obtain a USB caddy and extract the data that way.
    Make sure that the caddy you get will support SATA drives (all new ones will).
    Although I am an HP Employee, all views expressed are my own and are not on behalf of HP
    Regards
    Ty
    **Click Accept as Solution on a Reply that solves your issue to help others who are searching**

  • How to use 'UNION' between two different databaseservers

    Hello,
    Could someone help me out. I am trying to find out if and how to use 'UNION' between two different databaseservers.
    We have 2 different queries, each queries on a different database; one MySQL the other MSSQL.
    Could someone tell me how to use 'UNION' between thes 2 queries?
    Thanks in advance,
    Samir Benalla

    Hello
    You may use openrowset statement, (OPENROWSET (Transact-SQL))., but before you use this, you must configure your server
    sample:
    SELECT a.*
    FROM OPENROWSET('SQLNCLI', 'Server=Seattle1;Trusted_Connection=yes;',
         'SELECT GroupName, Name, DepartmentID
          FROM AdventureWorks2012.HumanResources.Department
          ORDER BY GroupName, Name') AS a
    UNION
         SELECT GroupName, Name, DepartmentID
          FROM AdventureWorks2012.HumanResources.Department
          ORDER BY GroupName, Name
    With this you can define a connection using native client to server Seattle1, and execute a query there, The results will be spooled on your server.
    Connectionstring
    Server=[SERVER_NAME];datasource=[YOUR DATABASE NAME];user_id=sa;password=sapassword'
    if you use FQDN on your Query, than the datasource parameter in connection string can be letf out.
    Regards
    János.
    take care of performance, it can be very slow,

Maybe you are looking for