Outbound delivery determination

Hello
While configuring the Delivery Item Category Determination,
Their is a field usg- Item usage I have maintained the same, do I also need to maintain the same in Material Master as the system is not picking up the delivery for PO in VL10B
I am doing the confirguration OutBound Delivery for Packing Material, if the steps can be provided for the same.
Regards
Niti Narayan

Hi Mariana,
Please follow the normal steps used in SD modul for batch determination for deliveries.
Maybe this link also helps to resolve your problem:
Auto Batch Determination For Stock Transport Order/Replenishment Delivery
Is it OK?
Regards,
Csaba
Edited by: Csaba Szommer on Dec 23, 2008 7:42 PM

Similar Messages

Outbound delivery output not re-determined during goods issue?

Hi,
i'm currently in the process of testing an SAP upgrade from 4.6B to ECC 6.0, and have encountered the following problem: one of our outbound delivery output types (LD00) is supposed to print out at goods issue (which happens in VT02N, by the shipment).
In 4.6B, the output determination procedure correctly triggers at goods issue, however, in 6.0, it doesn't. Re-opening the delivery in VT02n causes the LD00 to be determined after all, but by then it's too late.
Does anyone have the slightest idea why the output determination isn't re-evalutated at goods issue?
regards
Rob

Hi,
Perhaps you are using an own VOFM subroutine to do filters if the output works or no. You create this subroutine with tcode VOFM, and after some steps you create an include in a report of SAP (SAPL). You can check if you are setting a VOFM in SM34/VVC_T683_XX_E1 for the output scheme. Sometimes is necesary to run this report to create and activate the report sapl, if no, when the abap call the subrutine, SAP doesn't find (perform * if found)
For VOFM there is a good document in google, format PDF, search it with the string inside vofm ext:pdf.
I hope this helps you
Regards,
Eduardo

Print HU label from Outbound delivery using output determination

Hi,
We have a business requirement to print HU labels from outbound delivery. The steps followed are
1) User executes VL02N
2) User clicks on packing
3) Material is entered to pack. HU is automatically generated.
4) After saving the delivery, output message is triggered.
Output determination is as follows
1) An Z output type is created.
2) Form entry and smartform name is assigned to this output type
Issue:
The issue is when the output message is triggered and the code in the form entry is executed, the handling unit (from nast) is not yet committed in the database. Since it is not updated in the database table, we cannot get any handling unit data to be printed.
Any inputs on how to print HU labels using output determination from outbound delivery is appreciated.
Thanks,
Sandeep

Hi Surya,
Thanks for the reply. But, my question was how to print labels from VL02N when i pack a material on this delivery.
Regards,
Sandeep

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

Output determination for outbound delivery

hi ,
I have configured outbound delivery with standard output type LAVA.
The output type LAVA is determining automatically for header (EXTRAS-HEADER) whereas it is not determining for item ( EXTRAS-ITEM).
I am using Access sequence 0003 sales org/dis./div./customer .Also i have maintained condition record for 0003.
May i know why the output type is not determining for items?
Thanks

Hi Ganesh Ram
Use Out type SHOR with Access sequence--- DlvType/Shipping Point
Thanks
Ramesh

Route determination in Outbound delivery

Hi Friends,
After STO is done i made an Outbound delivery for that STO. Is it possible to determine the route for the outbound delivery?
What is the significance of Route and Route Schedule in Transport Tab of Outbound delivery?
Please some one explain the route determination in Logistics execution master data and also what are all things i should define for route determination for outbound delivery?
Thanks in advance...I'm ready to provide more info on this.
Regards,
Arasu

hi
You can define routes in Logistics execution > Transportation. There are two ways to determine route in STO. One is manually enter route in STO and 2ndly is automatic determination. Automatic is recommended when there are big shipments. Automatic route determination is based on Shipping point, shipping conditions, ship to party. I recommend you to use manual entery route in STO. You can also calculate freight and shipping costs by using transportation in logistics execution.
Check the following links. You will find helpful material in these links. I am also configuring transportation in SD module. Transportation is done for both STO and Sales order.
Re: Work Flow & Procedure For Transportation Module Of SD
http://help.sap.com/bp_wholesalev1600/Wholesale_US/HTML/Scenarios/G82_Scen_EN_US.htm
update forum accordingly

Automatic Batch Determination prior to Picking in outbound delivery

Hi everyone,
My client currently wants to activate automatic batch determination. The main concern is that once the delivery is created, the picking can happen 2-3 weeks after the delivery. So in this case, they do not want batch determination during outbound delivery. They want to run the batch determination prior to Picking process. Is there a standard process to do this?
In addition, for batch determination, if it in an internal customer, it should take LIFO process and if it is external customer then FIFO process. Also if it is STO then it should take LIFO process. Does someone know how to control this
Thanks

Hi
Do it in the SO. In SM30 for V_TVAP_CH, set what the type of items of SO are determined for. For STO, do it for NLN and NLC in the delivery items (SM30/V_TVLP_CH). Check your ATP settings and that during this time (2-3 weeks) the stock for this batch goes on for your customer.
I hope this helps you
Regards
Eduardo

Goods Receive for Outbound Delivery Without Reference using MIGO

Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibarani

use transaction mb0a it will work for the scenario.

Stoarage location is not being reflected in the outbound delivery

Hi
I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery . Since this storage location is WM managed hence the WM status shows that the transfer order is not required .
When i tried to put manually the storage location the system throws an error that this storage location in not maintained in plant R001 .
Althoght the stoack has been there in the stoarage location with resepct to plant ans also the matrerial master is also been extended for this storage laocation and all the respective views such as WM and Sales hasbeen maintianed .
Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
Thnaks and Regards
RAJ K

Hi,
did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
stor.conditions (table TVKOL)?
Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
Regards,
Ely

Scheduling Agreement Schedule Lines firmed after outbound delivery

Dear All,
We use scheduling agreement for cross-company process in our client. After MRP run schedule lines created automatically. For the next step outbound delivery is created via VL10F (or VL10B).
After outbound delivery creation, on MD04 or ME39, i see the schedule line firmed (*). Because firmig MRP doesn't change those schedule lines. This is a problem for our client.
Do you know a way for MRP can change the schedule lines even outbound delivery created ? How can i manage this situation ?
Best regards,

Hi Anil
The '*' that you see means that the schedule line has been changed manually and the Firming indicator (EKET-FIXKZ) is set when there is any change to the Schedule line.
So, when a Delivery is created, the schedule line should be 'Fixed'.
Otheriwse, MRP can delete or change this schedule line and it would cause an inconsistency in the system. This is the logically intended behaviour.
Please see the F1 help for the field EKET-FIXKZ:
"Schedule Line is "Fixed"
Fixes the schedule line and determines that it cannot now be automatically changed as a result of materials planning and control/MRP activities.
Procedure
The indicator is set automatically if:
.- You make manual changes to a line of a scheduling agreement delivery schedule that was created via the materials planning process
.- You create a schedule line manually
Dependencies
You can specify whether Materials Planning/MRP can change delivery schedule lines within the firm and trade-off zones in the additional data for the scheduling agreement item."
I hope this helps.
Anna

Error - Outbound delivery - WM

Hi,
I am facing error while creating the outbound delivery ( Return order process)
"Error while determining ref.mov.type for WM via Table 156S: 161/X/X/ /L/X/"
Thanks,
AC

The detail error are as below:
Error while determining ref.mov.type for WM via Table 156S: 161/X/X/ /L/X/
Message no. L9029
Diagnosis
The system attempted to find the reference movement type for the Warehouse Management system. A corresponding entry is missing in table 156S with the argument 161/X/X/ /L/X/.
The argument consists of:
IM movement type
Indicator: Value update
Indicator: Quantity update
Special stock
Movement indicator
Access indicatorsure
Indicator: Consumption
When I enter the outbound delivery number in VL02N then at the time of entering the storage location I am getting the above error. The same config setting I am able to create the delivery number in quality server and even developemnt previously it was working and suddelnly now I am getting the error.

Storage Type 916 in the outbound delivery

SAP GURU,
When i am creating a outbound delivery against a sales order...as my Plant is warehouse mnamanged so Warehouse will automatically get determined in the delivery based on SPRO setting but i am not able to find out how storage type 916 at the item level in picking view is getting determinated automtically.
If i check storage type search criteria in SPRO..we have not maintained 916 storage type for my ware house and picking combination.
Plz help in getting the logic of 916 storage type.
Nitin

I got the answer myself ...Plz ignore my question.

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

STO Problem while doing GR against outbound delivery

Hi Gurus,
Need your help regarding STO,in my case i created
1. STO
2. Delivery in VL10B t code and did PGI
3. on the basis of Delivery i created billing document
4. Excise invoice in J1IIn
Now while doing GR against outbound delivery system in not doing GR giving some error code 1 as follows
Goods receipt not possible for delivery 4900000212: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
My delivery types shipping points everthing is in place but am not able to trace out whats the problem. Please help its urgent
Regards
Vivek

Hi
Based on the error code 1 , it says that the delivery does not exists in the system, That means you cannot perform a Goods receipt againsst the document specified
I have also not done Goods receipt with reference to Outbound delivery. So i am not able to confirm that this can be done or not.... i will definitely get back to you on this.
Thanks & Regards
Kishore

Packing handling units to outbound delivery with batch management

Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
Isaac

Dear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely

Outbound delivery determination

Similar Messages

Maybe you are looking for