Outbound delivery document flow is not updated after LT0G

Hello Gurus,
after executing LT0G Returd to stock from delivery, a document flow of outbound delivery is not updated. Still an OvrllPickStatus remains = C Fully picked and OverallWMStatus = C WM trsf ord confirmd. This though the goods result to be returned correctly from 916 into stock.. What can be the reason for this malfunctioning?
Jari

Many thank for your feedback. The transaction LT0G is executed succefully and a destination storage bin results a correct quantity. Anyway I checked SM13 and a log is empty.
The notes you mentioned seemed very promising, but unfortunately they are not relevant as a release in where I am working is SAP ECC 6.0 SAPKH60013.
I am still trying to find some possible other notes but without a success so far.
Jari

Similar Messages

  • Document flow is not updated in outbound delivery

    Hi,
    I have issue at my client side that We create Transfer order and it is not updating in outbound delivery document flow.  Update without delay is check in shipping configuration.  Can somebody please provide the reason, Configuration missing or some OSS note which can help us?
    Thanks,
    RD

    Hi rohit
    I had refered to SAP OSS note 358454 earlier.
    Reward if useful
    Regards
    SE

  • After completion of GR(MIGO) delivey document flow was not updated.

    We have to move the stock from PlantA to PlantB . Purchase order and deliveries and PGI has been created and stock is picked out of PlantA . For that delivey goods reciept also completed, when i checked in Purchase order history system showing GR has been completed. but in delivey document flow system showing upto GI document. GR document was not updated.
      When i checked in MB5T stock is showing under *Display purchase orders with delivery completed too*
    Thanks in advance****
    Edited by: RAVI Y on Feb 18, 2009 7:10 AM
    Edited by: RAVI Y on Feb 18, 2009 7:28 AM

    Dear Ravi,
    How can we check  GR (MIGO) is completed with reference to outbound delivey or PO?
    Regards
    Ravi
    Edited by: RAVI Y on Feb 18, 2009 9:55 AM
    Edited by: RAVI Y on Feb 18, 2009 9:56 AM

  • Sales order document flow and delivery document flow are not in sunc

    Hi ,
    whan I look at the Sales order document flow  there are lot of line items rejected with specific reason , but for the same line items already delivery and PGI in place . When we try to do the invoice it shows error , it can't be invoiced because line items in sales order are rejected .
    Ideally in business when delivery and PGi created for the sales order , it should not allow the line item to reject . system should look at follow on documents in place . Reverse process should follow .
    Pls provide solution to stop item rejection when follow on delivery document in place .
    thanks and regards.
    Sunil Tripathy

    Hi,
    Goto the T.Code "VOV7".
    Select your item category.
    Details.
    Maintain the Completion rule as "A(Item is completed with the first reference)".
    Save.
    If you do this after the follow on document is created,the item is completed and you cannot reject the item.
    For your second question,
    Goto the T.Code "VTLA".
    Select your valid combination.
    Click on item.Select your item category.Details.
    There is a check box called as "Update document flow".Tick that one.
    Save.
    Regards,
    Krishna.

  • Document flow is not updated for Scheduling agreement

    Hi Gurus,
    Can you please advise on the below issue..
    Some deliveries created with reference of schedule agreement are not displayed in scheduling agreement in forecast delivery schedule under delivery tab and as well as not updated in document flow for VBFA table.
    There are two ways to create delivery with reference of Scheduling agreement , 1)  Create Delivery order (Order Type   : TAM) with reference of SA, then delivery for TAM order.
    2) we can add the line item in existing TAM order with reference of SA .
    Advance thanks for your valid points.
    Best regards,
    Venkat.

    Hi Ram,
    Thanks for the reply, there is no issue in copy control settings.
    Best regards,
    Venkat.

  • Outbound Delivery Document Flow (One-Step procedure) Goods Receipt

    I am trying to extract the Goods Receipt status of Outbound Deliveries which are posted using One-Step procedure.  I can do this one delivery at a time using VL03N.
    Some sites (plants) are configured with One-Step procedure and others are configured as Two-Step procedure.
    Document flow of an Outbound Delivery is extracted from table VBFA.
    For the two-step delivery process (Movement type 641) the Goods Receipt is recorded in table VBFA (Subs.doc.categ. / VBTYP_N = 'i').  Therefore, I can easily extract the goods receipts for these deliveries. 
    However, for the one-step procedure (Movement type 647) the Goods Receipt does not appear to be recorded in table VBFA.  Does anyone know which table the Goods Receipt is stored for one-step procedure?
    Using transaction VL03N we can view the document flow.  It appears that for One-Step procedure the Goods Receipt is held at item level.  By highlighting a delivery line in VL03N and viewing the document flow we can see the goods receipt for One-Step deliveries (therefore, the data must be held somewhere).
    I understand that by using One-step procedure the goods receipt is posted automatically, so we can assume that there should never be outstanding Goods Receipts for One-Step sites.  However, I have been tasked with the job of reconciling all deliveries for the past 12 months.  I need to prove that a goods receipt has been posted for every single delivery.
    Any advice is much appreciated.

    Thankyou for the advice.   I will proceed with your recommendation.
    However, the query is inefficient since the link between LIKP and MKPF does not use the primary key (Article Doc. / MBLNR).  We have almost 7 million records in MKPF table. 
    Is there any intermediate tables I can include between LIKP and MKPF so that only primary keys are used for the joins?

  • Outbound delivery document flow shows TF document archived

    Hi folks,
    This could be a recurring problem.
    Case is regarding STO. The outbound del. is supposed to create an IB del. However for some reason this is not happening.
    When I checked the document flow, it shows "TF to stock in trans .49XXXX" AND  the status as "archived".
    Pl. let me know what needs to be done further.
    Thanks.
    Regards,

    Right Jürgen,
    However, what could have caused the deletion. Its a prod. env. and all of a sudden its happened.
    Whats the way out further for creating a PGI, I/B del. further steps.
    Regards,

  • Document Flow is not updating

    HI Experts,
       I am doing Order to cash Cycle, and iam using CIN also, when i am saving Billing document iam getting the following error
    Express document "Update was terminated" received from author
    Error in allocating internal document number Interval not found Number object J_

    Error in allocating internal document number Interval not found Number object J_
    Kindly check the Object J_1IINTNUM to assign the Number Range.
    Express document "Update was terminated" received from author
    Pls check if the Number Range is full.
    Best Regards,
    Ankur

  • How to update packing list inform to an outbound delivery document

    Hi all Experts,
    I meet with an tough requirements, Is there any solution fuction can use to generate packing to a outbound delivery document?
    PLease kindly advice, thanks!
    Regards,
    wei-guo

    Hi,
    I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
    This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
    The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
    The picked quantity is generally filled:
    u2022     by printing the picking list
    u2022     Warehouse Management by creating a transfer order
    u2022     or by manual entry
    Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
    In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
    I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
    Regards,
    Andrea

  • SD Document Flow is not been Updated

    Hi,
    I am using MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT to create Goods Movement.
    These FMs create the Material Document, but they don't update the Delivery flow.
    Manuaaly goods issue is done through VL02N and it updates the document flow.
    Note:- Bapi_goodsmvt_create cannot be used as it doesnot support movement types 643 and 644.
    Please help.
    Regards,
    Nitesh.

    hi , run this fm in a series like
    se37 : in menu tool bar ; function module -
    > then test ---> test sequence enter your function module in the next sequence enter fm name as bapi_transcation_commit . end run the fm then it may slove the prb
    why because data base table are not updated with out using commit work . some times orders created means fm are executed successfully and it generate order number s but those are not avalible in Data Base tables . so please try it once
    if your problem is sloved plesae close the thread
    Regards
    Siva

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • STO Partner Copy Control to Outbound Delivery Document (NL)

    Hi -
    Partner Schema CR for 0003 UB Type has been maintained in configuration, which allows CR (Freight Forwarder) partner function to be manually added to UB Document Types (Partner Determination Process u2013 0003 Stock Transfr PurOrd).
    However, even with this configuration the CR partner does not copy to the Outbound Delivery Document.
    After some analysis, I found the following:
    In program SAPLMEPO (MM06EF0P_PARTNERS) FORM PARTNERS in line 97 u201Ccheck EKKO-BSAKZ equal to spaceu201D; if purchase orders have EKKO-BSAKZ = 'T' then never determine partners. I have checked the EKKO table for field BSAKZ and all STOu2019s have a T in that field. If the code is looking for <blank> in order to apply the partner it looks like the program will not attempt to retrieve the Partner Functions with BSAKZ = T.
    All other partners are getting copied to the outbound Delivery, such as PI (Invoicing Party), DP (Delivering Plant), SH (Ship-To)etc.
    Is there a way to have Freight Forwarder partner copy control to Outbound Delivery document at time of Delivery create from either Vendor Master or Customer Master for STO (UB Purchase Order type) / Delivery type NL?
    Thank you,
    Karen

    remark: for me the check is in line 113 (SAPKH60407).
    Please read OSS note 842829:
    2. The system does not transfer the partner data from the STO to the replenishment delivery. This particularly applies to the forwarding agent. The replenishment delivery uses only the customer of the receiving plant (EKPO-WERKS) as a partner. In the replenishment delivery, this customer (EKPV-KUNNR) is the direct goods recipient. The customer is not the sold-to party or a general debtor, for whom the system would determine a (different) goods recipient using the customer master in the replenishment delivery. If the PO header contains a vendor, you can use a modification to transfer the vendor as a partner to the replenishment delivery, if required. However, this is not the standard system behavior. There is no known modification for transferring the forwarding agent.

  • Outbound delivery document from Sales order

    Hi ,
    While creating the outbound delivery document from Sales order, all the line items of the Sales order are populated in the Delivery document. The line items where stock is not available, the line is still populated in the delivery document with zero quantity.
    Pls suggest the way in config, so that at the time creation of the delivery document system to populate only the lines with the available stock.
    Thnx

    Hello Soumya
    I could not able to find any std transaction or config via you could restrict it. However you also no till 'Picking' not completed user is not able to make postings... so i couldnt see any issue in this.
    Still you need to restrict this, you to configure User Exit via you can restrich the lin items to come in delivery for no stock item.
    Amol

  • Recent files list is not updating after 10.1.13

    Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer.   If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update.  The recent files list updates only if I open the file from the same drive listed under Network.

    Hi Bert ,
    You might want to report for a possible bug.Please refer to the following link for the same.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    Regards
    Sukrit Dhingra

Maybe you are looking for