Outbound delivery was created saved and deleted

Hello,
I created some outbound deliveries and SAP's system said that the outbound was saved (and gave me the number).
After fiew minutes I received a SAP mail to inform me that the document was updated.
After this, when I tried to view it and SAP said that the document does not exist...
I Don't know what to do ???
I verify all the configuration with NACE but I don't find and solve the problem.
Does somebody can help me , please ?
Regards.

Hello, Patrice
Did you got any Exception some thing like: Express updated was terminated (i.e, an Abap shortdump /Type of Error)
If you got the above message while you are Saving or at the time of Saving the Outbound delivery creation.
Then, certainly physically there is NO Outbound document is present in the system. This may be due to not updating the Abap tables while saving (system may throw this kind of exception at the time of saving
Or
Sometimes when you go to display the document which is already created)
Suggestion: If you got similar to the above, then you need to analysize the issue with the help of Abap /Basis consultant.
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Similar Messages

Outbound delivery was created but deleted

Hello all,
I create an outbound delivery from an order.
SAP's system tells me that the outbound delivery 80002121 was created.
After a short time I receive a message by mail from SAP to inform me of this outbound.
After, when I'm trying to open this outbound, SAP's system tell me that this document doesn't exist...
Somebody can explain to me how change the output for a printer and no mail ?
REGARDS.

For more informations:
IN NACE :
I choose Application V2.
1) I choose conditions records LD00 => customer number + partner function "SH" + Medium "1" print out + time "4" send imediatly.
in communication, I choose my printer and check print immediately
2) TCODE V/71, I VERIFY delivery type = "LF" and check the output procedure (=V10000) and output type (=LD00)
3) In NACE, I click on "PROCEDURES" and check Procedure "V10000" and control "LD00". result OK.
4) In NACE, I click on "OUTPUT TYPE", chosse LD00 and display details (sequence = 0005). In partners functions, I've only "Print output".
5) In NACE, I click on "Access sequences", check acces sequence "0005". Access ok and fields ok.
But with this customizing, I always received a sap mail and the outbound delivery isn't saved...???

Req: Save Valuation Type in PO when Outbounde delivery is created and Saved

Hi Gurus,
I have a requirement.
1) PO is created
2) Outbound Delivery is created with ref to PO and saved . The VALUATION TYPE entered in outbound delivery needs to be updated in the PO.
please guide me in which user exit in Outbound Delivery can I update a PO valuation type.
and also how can i change it whether through a BAPI or Direct table change.
Avi.

Hi,
I have resolved this issue, I'm posting here so that it could be useful to someone.
To trigger output from Inbound delivery, I have setup a new output and also developed a process code XXXX. A new FM is developed for this process code.
In the new/ customized FM, I have called the standard FM 'IDOC_OUTPUT_ORDERS' which is used to pull PO data for ME10 process code.
It is know that we have to pass PO number as object-key to the FM to pull the PO data but when a output is triggered from inbound delivery object-key will be a delivery number.
Write a simple select statement which will get the PO number from EKES and set this as object key and pass it to FM 'IDOC_OUTPUT_ORDERS' .
Thus, you can generate an outbound IDOC which has PO data when triggered from E1 application (Inbound Delivery).
Thanks,
Santo
Edited by: santo29 on Jan 13, 2011 9:44 PM

Outbound delivery not created automatically

Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
Lindsay

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

Outbound delivery not created

Hi,
I have the following scenario in STO:
Planned delivery time for a material =2days
When material delivery date is on wednesday , system proposed delivery creation date as monday-that is ok.
When material delivery date is on thursday, system proposed delivery creation date as tuesday- that is ok.
When material delivery date is on tuesday, system proposed delivery creation date as friday(2day minus as Saturday but since saturday is holiday , it take Friday)- that is ok.
Problem is in situation:
When material delivery date is on monday, system proposed delivery creation date as Friday(2day minus as Saturday but since saturday is holiday , it take Friday). Systematically this is ok but not physically as other plant has holiday on saturday and sunday , so if it get delivery on friday , they can't ship before tuesday.
Please suggest, how this issue can be resolved.
Regards
Sandeep Kumar

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

Outbound delivery date in June and customer invoice post in July,tax rate?

Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachin

Tax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav

I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'

'''I was on facebook and deleted an icon by using the right-click menu but then all my pictures and all profile pictures, could no longer be seen. I was able to view them in Explorer so this is something I did in Firefox. How can I unblock a site?'''

If you select that right-click context menu entry then you block all images from that domain and not one specific image, so do not use that.
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions (e.g. sphotos.ak.fbcdn.net)
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Can VMD_EI_API handle Create, Edit, and Delete Vendor Master records?

Hi Everyone,
I have a development that requires to create, edit, and delete vendor master records through a webportal ui. Technically, it will be a background process in SAP because it must not have a dialog screen. In my search so far, there is no standard BAPI or Function module that can handle this one.
Can the class VMD_EI_API handle the requirements?
Regards,
John

Hi,
Yes, You can use this class to create/modify/delete vendor master data. You can find in SCN documents with example how use it.
Jarek

My project was not saved and is now gone...where did it go?

Help
My project was not saved and is now gone...where did it go?

Check to see if Premiere autosaved your project. Open Premiere and start a new project.
File Menu > Project Settings > Scratch Disks
The last entry is 'Project Auto Saves'. See where this is pointing on your computer. If you are very lucky, Premiere may have autosaved your project from before and you'd be able to find it and open it that way.
Otherwise, you won't be able to recover a project that wasn't saved.

Need to create One outbound delivery against multiple PO and Schedule lines

Hi Experts.
I needed your help in regards to creating one single outbound delivery for multiple PO/SA lines(in one shipment) using either FM GN_DELIVERY_CREATE or
W_FRM_DELIVERY_CREATE_GENERAL.
I have tried setting up the indicator XKOMDLDN-KZAZU = 'X' in the interface to combine orders in one delivery but I am still getting multiple deliveries.
If somebody had sucess with the above then can you please let me know what other parameters do I have to set or let me know if I have to code this in a user exit/badi which will be called inside these FM's.
OR
Please let me know if there are any other alternatives to the above FM's to post one single delivery against mupltiple PO's.
Thanks
Raj

Hi,
I am little bit disappointed since I did not get even a single reply for the issue that I raised. Anyways finally after couple of days debugging VL10d and going thru SAP support website I found couple of solutions. Here it is in case anybody else needs it in the future.
I am using solution 2 below.
Solution 1.
From SAP portal website u2013 Apply SAP note 386340 (Grouping purchase orders into one delivery using VL10*)
Note- This solution will affect all your plants and delivery types that is using VL10d transaction or any other transactions calling FM GN_DELIVERY_CREATE
Solution 2.
This is the solution that I am using and it is done by implementing BADI u2018LE_SHP_GN_DLV_CREATEu2019 method MOVE_KOMDLGN_TO_LIKP.
1) Here I am checking for two fields (IS_XKOMDLGN-WERKS and IS_XKOMDLGN-LFART) are equal to the plant and delivery type that I need to combine deliveries for.
2) If step 1 above is true then I am updating the header structure CS_LIKP-LFDAT (delivery date) to todays date (sy-datlo).
Thanks
SHR.

Outbound delivery gets created automatically not by vl10g

Hi :
Here is my scenario:
it is third party order, once sales order get create a pr is created automatically, and we created purchase order and inbound delivery for it, an outbound dellivery gets created one we finished creating inbound delivery as i checked it is created by batch job not by vl10g, my question is that is there another way to have outbound delivery created automatically once we finished creating inbound dleivery for this scenario?

See my reply in blue
As per my experience for third party sales scenario, it don't involve GR at all.
It does invlolve GR and GR is done for its PO.
If its there then it would be statistical.
What did you mean for statistical?
That's why, if you can tell us, what movement type you use for GR, it will assist us assist you further.
The movement type is 101.
B'coz, I get a feeling that you don't have GI for the process and therefore you don't background job for the same SM37.
And if GI is present, then its not third party sales.
What did you mean for "GI is present"? As we finally need to post goods issue for the outbound delivery

Single STO Outbound delivery not creating for different lines in PO.

HI ALl...
1... I have 2 different ST PO which raised by other plant(plant is same), and it contains different line item.
When try to do outbound delivery in VL10B, it is creating seperate outbound delivery doc to each item, but not created single doc for all items.
Please let know, if any thing needs to be done, to get create single outbound delivery for all the items in PO.
2... Is it possible to pick the Price automatically ( MAP of the supplying plant material), while create Billing in VF01.
Regards
Chandradhara...

HI..
I have checked and corrected Delivery date/ loading group and Transportation group, now it is coming single delivery document.
OTHER REQUIREMENT IS;
We need MAP of the Supplying Plant to be picked will do billing for PRICE condition. What settings should be done
Regards
Chandradhara

Bapi or FM to create,change and delete Contact persons for vendors

Dear Experts,
We are replicating the Contact persons details from SUS(SRM) to ECC, When a Contact person is create,changed or deleted the data should be replicated in ECC. We are doing custom development to do this, I need to know is there any function module or Bapi which I can use to create , change or delete the contacts persons for a vendor.
I tried using BAPI_ADDRESSCONTPART_CHANGE, BAPI_ADDRESSORG_SAVEREPLICA for changing but its doesn't covers few fields like time zone etc. For deletion I tried WY_KNVK_SINGLE_DEL_FROM_BUFFER its too not helping me .
Please let me know is there any bapi or fm to do these process or we can go for BDC.
Thanks & regards,
Santhosh.R

Hi Santosh,
Can you please tell me what Business Scenario is asking you to consider the Time Zones .
If you know the Customer Number you can very well get the country and there are various FM's to get the time zone based on a country .
Now Call the FM (as wrote by you ) based on the TIme Zone condition,
Please enlighten me if i am incorrect.
Thanks
Sri

Goods Receipt of HU in an Outbound Delivery not updating HUMSEG and Hu Hist

Hi,
   I have a pecuiliar prob ... I am trying to do GR (MIGO) for an Outbound Dely containing HU (non HU Stor Locn), although I am able to post the article documnet. The Gr article doc doesnt get updated in the table HUMSEG and in the HU History.
   Whereas if I do the Gr for an Inbound Delivery containing HU in the same stor location , the article docs gets updated in HUMSEG.
    Can anyone throw some light on this?
REgards,
BG

HI Csaba,
   Now I am trying to create GR for Inbound Dely containing the HU through MIGO and not VL32n , it is throwing the error
Packing can only be updated via inbound delivery dialog
Message no. VLA311
    We are into ECC 6.0 and it seems that SAP NOte 1384533 has already been implemented , but still I dont see the VLA 311 message in System Messages under the Logistic Execution path of SPRO.
   I have been reading the SAP Note 199703, but when I set the GR Assignment field of the Conf Control to blank and remove the movt type for Dely Item Cat ELN , it doesnt allow me to create HU in the Inb Dely, although it allows me to create a GR for the Inbound Dely through MIGO .
     Can you please help me in overcoming the prob.
REgards,
Binayak
Edited by: Binayak Ghosh on Jun 15, 2011 4:37 PM

Create, Update and Delete Partner functions for a Functional location.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Outbound delivery was created saved and deleted

Similar Messages

Maybe you are looking for