Outbound e-mails blocked in Outlook

I'm using Outlook V14.0.2 for Mac and suddenly outbound messages became blocked again. Had problem previously more than a month ago when Port 25 was blocked so changed to port 587 and all was well. Suddenly this problem has reappeared again and with Port set ot 587 outbound e-mails are again blocked. Does anyone have a similar problem?

Anthony_VZ,
Thanks for your reply but I still cannot get this going. If I change the outgoing port to 465 and check the secure SSL option, it simply times out and still never sends the message. So, I tried all combinations -- setting the new port numbers as you have suggested for both incoming and outgoing, turning SSL both on, then off and nothing seems to work for the outbound messages. I am OK on inbound and even if I reset the incoming port to 995, messages come in on port 110. So, problem still exists for my outbound messages.
Any other suggestions? I am using a MAC and the version of Outlook is 14.0.2. All had been working fine so something must have changed on the verizon side.

Similar Messages

Apple Mail blocks Charter email, which blocks Apple mail

I am running 10.6.8 on a 2008 Mac Pro. I was using MS Entourage as my email program. I want to upgrade to Lion/Mtn Lion, but my old MS Entourage or other Office programs won't work on that, so I decided to start using Apple Mail (version 4.6)
I get my email thru my ISP, Charter.net,
When Apple Mail is OPEN it will not connect to Charter email, and Charter email will not display or recieve or send any email, nor will Entourage (POP) or a MS Outlook (trial version). Apple Mail says it "cannot connect to the IMAP server," and it "cannot connect to the SMTP server."
I have set up Apple Mail correctly according to Charter: IMAP port 143, SMTP port 25, no SSL etc (default email reader Entourage, but I've tried Mail, Outlook, etc. …no change in my problem)
When I quit Apple Mail, the others will immediately access/send emails.
The problem seems to be that for some reason Apple Mail blocks Charter mail from connecting, but since that is where I get my email, Apple Mail is blocking itself, Entourage and Outlook from connecting to the IMAP/SMTP servers, therefore no mail service.
The strange thing is that now and again Apple Mail WILL connect—briefly—and mail will come in/go out, but then drops offline again.
I've been on the phone with Charter for a couple hours and had a service tech here this morning for an hour, but everyone is stumped. Of course none of them are very Mac-savvy, so that doesn't help.
Can any of you help?

I've been having exactly the same trouble with my Charter E-mail Accounts.
I first use two of my existing Charter E-mail Accounts (which I have never used in years!). Set them up in Apple Mail (Snow Leopard 10.6.8, on my MacPro 4.1) as POP Accounts!
They did work sometimes, but now I can only receive mail.
Set up a new Charter E-mail Account, and used that to Set Up in Apple Mail as IMAP Account. It does NOT work at all, period, either way.
I've been on the phone with Charter Tech Support many, many, many times, for many hours, but nobody has a clue. They tell me to check their webpage for Set Up, which I don't need because I've been through the Set-up Procedure so many times already.
Then they tell me to call Apple Tech Support, which I cannot afford.
So, now I'm back to using my old DreamHost E-mail Accounts, which work just fine, after their Tech Support helped me to resolve some issues. They had me open Terminal, then Keychain. I tried all three Keychain Methods, which resolved the issues with DreamHost E-mail.
I'm going to try setting up my G-mail Account in Apple Mail and see what happens .....

How do I create subfolders UNDER multiple accounts in Mail, similar to Outlook?

I am trying to move from Outlook 2011 MAC to Apple Mail. I understand how to drag my folders (mbox) but I have 3 mail accounts in Outlook and want to create these same accounts in Mail...followed by the specific folders under each mail account.
Mail doesn't seem to allow me to simply drag a subfolder under a particular account. I'm on the latest version of Mountain Lion, as an FYI.
Can someone help me because there has to be a way to keep things organized by email account and respective subfolder.
Thanks,
Harlan

In Solution Manager use SPRO to see the step by step configuration.
Shaji

Multiple exchange e-mail accounts in outlook 2013

Hello. I'm trying to set-up two exchange e-mail accounts in outlook 2013 (Exchange server is synchronized with Active Directory).
Once I add second account and restart outlook I get password prompt from each of the accounts. And it keeps prompting all the time and one of the accounts do not work. Could you please assist me on how to set-up those multiple exchange e-mail accounts correctly

Setup the second Exchange account in one profile would always keep prompting usernam/password. This is limitation of Outlook profile.
To work around this, I recommand that you may use the tool as below:
http://www.codetwo.com/freeware/autologon/
Note:
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.

No new mail notification in Outlook - CAS Exchange RPC Client Access problem

Hi, we're facing this problem:
Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013) anymore
Inbox does not show the new mail either
When the user changes folders in outlook, the new mail does show in the Inbox folder
Restarting Outlook shows the new mail as well.
The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
No entries in the event logs that seems to be related
As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD while the issue occurs. We
can only kill the process and restart the service, solving the issue instantly.
What we’ve tried until now:
Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
Updated all Exchange servers to latest critical Windows updates
Recalculated requirements using MS Sizing tool. Upgraded EXCH1-RTD VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
and 4vCPU (1 core/cpu)
Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
Any ideas would be greatly appreciated!
Ron

Hi Ron,
From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

Is there anyway to send a mail from Microsoft Outlook to solution manager?

Is there anyway to send a mail from Microsoft Outlook to solution manager.
If anybody having notes or documents that will be very much helpful for me.
Awaiting for your reply,
With best Regards,
Alexey

Hi,
It is just the inbound mail configuration as like the out bound config.
Below are the required demo, blogs,helps
[Demo on Mail from outlook|https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/5087262b-59ef-2910-abb1-957000b7c3d4&overridelayout=true]
[blog 1 for mail to SAP|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID1382272150DB00641126052855673650End?blog=/pub/wlg/795 ]
[Artical inbound mail config|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10dfad5a-5398-2b10-568b-d3d999d49b5c]
Hope this helps
Jansi

Mail server for outlook?

does anyone know the mail server for outlook? i can't seem to find it. i have outlook 2003 for work.

OneAHis,
Is this the server information to enter in Outlook, or to enter in your iPhone?
Either way the server information would be your mail server. Who hosts your email? Is it your employer or is it an Internet Service Provider? Whoever hosts your mail server can tell you the settings, since they are the ones who control the settings.
This link has links to the settings for several common Internet Service Providers in the U.S.:
http://docs.info.apple.com/article.html?artnum=306074
UK:
http://docs.info.apple.com/article.html?artnum=306986
Germany:
http://docs.info.apple.com/article.html?artnum=306987
Hope this helps,
Nathan C.

Create a new Mail Folder in Outlook 2011 and control its location?

Hello,
I want to create a new mail folder in Outlook in a location of my choosing (from dialogue box)
After selecting the location, the user would get a dialog box that asks for the users initials (i.e CY)
A second dialog box would ask for the name of the new folder.
Clicking "ok" would create a new folder in outlook that looks like this:
20131107-TECH-CY-MyFolderName
A new dialog box then prompts for a location on the Mac where a similarly named folder should be created.
Clicking "OK" uses the finder to create this folder.
Many thanks for any help!

Does anyone know how to summon a dialog box in Outlook 2011 for Mac using Applescript??

I use Apple Mail and dislike Outlook. If I create a note in Apple Mail, move it to desktop for easy access and then open the note, it opens in Outlook. How do I stop Outlook from opening? Do I need to uninstall Outlook? Will it disrupt other software?

I use Apple Mail and dislike Outlook. If I create a note in Apple Mail, move it to my desktop for easy access and then open the note, it opens in Outlook. How do I stop Outlook from opening? Do I need to uninstall Outlook? Will it disrupt other software?

Open Apple Mail, and open Preferences (under Mail in the Menu Bar). On the General tab, check the "Default Email Reader" and set it to Mail (6.6).

Outbound e-mail in IC WebClient 7.0

Hi Experts,
Small question in regards to the use of sending outbound e-mails from the IC WebClient application.
- Is it possible to have these e-mails in the Agent Inbox?
- if not, is there any way to keep track of these e-mails and to look them up? (it is not stored in the CRMD_ORDERADM_H)
Thanks,
Sebastiaan.

Hi Sebastiaan,
If it helps, for your second question you can track the outbound emails in SOST transaction.
I mostly use CRM4 and there we're not able to put the outbound emails in agent inbox only by configuration. In CRM7 I don't know if it is possible.
Kind regards,
Garcia

TS3276 Can't see the sent e-mails with Microsoft Outlook

I can sent e-mails using Microsoft Outlook but i can't see the sent e-mails in the folder provided. I can only see them after someone has replied to it. What am i doing wrong?

Sorry Thierry if I wasn't clear enough.
I meant the Add-Ins tab in the Ribbon, not the Options:
SAP does provide the functionality to hide the pane, on the bottom right you can see the top of the pane and there is an X. It can close it but the add-in stays on.
Then in the Ribbon you can activate the "Add-Ins" tab and you will have the SAP Cloud for Customer menu command.
This is what I meant in my initial reply by saying that I do that often. I hide the pane and reactivate it by simply clicking on that button highlighter in black above.
At least in it's in Outlook 2010 but like you said in your initial post, maybe it is not available in 2013. Partho Guha will be able to confirm.
JB.

Opening mail in Microsoft outlook

Hi,
I've noticed this question or ones similar to this have gone unanswered but I am going to try. Is there a way to open .mac mail in Microsoft Outlook in XP. I have a mac at home and I can use the mail app to look at my emails. At work I have to use a windows machine and I hate having to go on to the .mac website and login...etc..
I have tried to set it up myself but I just do not know what server address to put into the setup.
Even if this is impossible, could someone tell me so I don't keep trying forever.
Thanks
Jason

I haven't accessed by .Mac account with Outlook but I do access my .Mac account with Outlook Express on my Windows PC at work.
If you have not changed your .Mac account from a .Mac type account to a POP type account with the Mail.app on your Mac, you need to create the account as an IMAP type account in Outlook or Outlook Express. I also use Outlook for my business email account at work but I prefer using Outlook Express for my personal email account to keep things separate.
Select IMAP as the account type.
Incoming Mail Server: mail.mac.com
Outgoing or SMTP Server: smtp.mac.com
Account Name for the Incoming Mail Server: The portion of your .Mac email address in front of the @ sign only.
Password: Your .Mac account password.
For the Outgoing Mail Server, select "My server requires authentication" and also select "Use the same settings as my incoming mail server".
Depending on your company restrictions, the only thing you may have trouble with is using the .Mac Outgoing or SMTP server at work.

I am unable to send e-mails from my Outlook

Everything was working ok, for ages. Suddenly I am unable o send e-mails from my Outlook.
"The message I get is: 'Unable to send the message. Please verify the e-mail Address in your account properties'.
When I 'Send a Test Message' from Outlook, Tools, Accounts. All actions are completed besides sending a test message when I also get the instruction.

Hi
If it happened suddenly so possibly it was a virus?
I dont know why you are not able to send the e-mails.
I think you should check the email account properties. Check the data of you POP3 and SMTP server.
Im not a outlook expert but this options should be found somewhere in the email account properties.
The last possibility would be deleting of the email account under outlook and then a new creation of the new account.

HT4863 Can I use g-mail rather than outlook?

Can I use g-mail rather than outlook with icloud?

Welcome to the Apple Support Communities
Outlook is a mail program, and Gmail is a mail service. You can't use an iCloud mail with Gmail because Gmail can only be used with Google mail. If you don't want to use Outlook, you can set up your iCloud mail using this information > http://support.apple.com/kb/HT4864?viewlocale=en_US
Also, you can access to your iCloud email on http://www.icloud.com

Outbound e-mails blocked in Outlook

Similar Messages

Maybe you are looking for