Outbound EDI IDOCs for G/L document posting

Hi All,
I'm trying to generate outbound IDOCs from G/L documents (FB70, FB75 transactions).
Of course INVOIC IDOC type does not work for this.
Does anybody know which is the IDOC type for G/L documents?
Really appreciated any help.
Thanks and regards!
Beatriz Balones
SD and MM Senior Consultant

Hi
it means you can use this document type only if you post the document by B.I (It's special usage).
This characterist is setted in customizing (trx OBA7).
You should choose another document type or change that configuration if you think it's wrong.
In my system the flag "Batch Input Only" for SA is space.
Max
Message was edited by: max bianchi
Message was edited by: max bianchi

Similar Messages

Problem in triggerring EDI idoc for Purchase order..

Hi experts,
I am trying to create an outbound EDI IDOC for a PO.
I have configured the partner profile in partner type LI with message type ORDERS in outbound parameters. I have created a new output type ZEDI for EDI, and entered in a message control, as application EF, message type ZEDI and process code ME10.
But when i go to the me23n and goto--> messages, but when i click F4 for output type i am not able to see the new output type ZEDI i have created.
And if i also enter NEU with medium EDI, and Partner function VN, and partner 3000(where i configured the parnter profiles), its giving an error as, "maintain outgoing EDI-connection data for partner 3000".
Kindly help me out. please experts reply me..
Nithin

Hi
<b>In the transaction NACE</b>
you need to maintain the necessary 'Z' output type, in your case.
Hope this will help.
Please reward suitable points.
Regards
- Atul

I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04

Hi EDI Experts ,
We Have ECC 6.04. We are planning to have inbound EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
1.For Goods Receipt against PO I have identified below Message type:
MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
WMMBXY/ WMMBID02- Messages Types - I remember used in last Project
Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
2. For Service Ent Sheet inbound posting I unable to find any IDoC and never heard same.
( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
What is exact fact ? Is there Service entry sheet can not pe posted by IDOC ? If yes, how ? if now, what is the best options ?
Thanks in advance.
Regards
NAP

Hi ,
In MM-SUS deployment,
Until SRM 7.0 with ECC 6.04, Service procurement using MM-SRV & SAP SUS, was not provided. But, as of “SRM 7.0, only in combination with ECC 6.04 ”, SAP standardized the “Service Procurement” scenario along with Material Procurement for MM-SUS deployment and so fully supported for Material & Services .
Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
Create Purchase Order
PurchaseOrderERPRequest_Out_V
Outbound
Change Purchase Order
PurchaseOrderERPRequest_Out_V1
Outbound
Receives Service Entry Sheet
ServiceAcknowledgementERPCreateRequest_In
Inbound
Approve Service Entry Sheet-> Send Approval Note
ServiceAcknowledgementERPConfirmation_Out
Outbound

IDOC for Invoice/Billing document

Hi Experts,
Some of our customers want us to send electronic but no paper invoice to them in the coming week.
I've investigated the process, steps are:
1. Do some configs for message type of billing document
2. Create KU partner profile and set outbound parameters, include Port / Basic type / Message type / Process code.
If you have experience about this (IDOC for Invoice/Billing document) ? please kindly share the detail for me.
Thanks in advance.
Regards
Sam

Hi,
Please check [https://supplier.intel.com/static/ap/forms/imp_gid2.doc|https://supplier.intel.com/static/ap/forms/imp_gid2.doc] this.
This might help you.
Thanks,
Abhijit

EDI/IDocs for WMS

Hi all,
I need sample code and processing steps for EDI-IDocs for WMS concept.

Hi,
check this it wil be helpful to you.
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
cheers,
sowjanya.

Manual creation of idoc for a Accounting document FIDCC1

Hi,
Some of the config for the change pointer was not moved to production and some accounting documents have been created which have not triggered the IDOC.
Is there a way to create the idoc for the accounting documents already created.
Regards,
Puneet.

Once you have all your change pointers setup correctly (view bd52) then you should be good to go BUT to answer your question about the existing documents .. you would need to somehow "touch" those documents to trigger the creation of the IDOCs. You can modify something on then that also is attached to the change pointer say a date? 1/11/11 change to 1/12/11 but don't save that value .. change back to 1/11/11 then save.
Just my thoughts .. let me know how it goes.
Jay Esparza

Idoc for Customer to Customer Posting

Hi
I want to upload finance data in SAP using IDOCS through XI
I'm using the following idocs
1) GL to GL Posting ........ ACC_GL_POSTING01 (Accounting: General G/L Account Posting)
2) GL to Customer Posting ..... ACLREC01 (Posting in accounting: Billing document)
3) Customer to Customer posting ......... ?
Which idoc should be used for Customer to Customer posting ?
I want to Debit one Customer & Credit the other Customer.
Please Suggest
Regards
Abhijit

Hi ,
You can try this question in the ABAP Help instead in XI , So that you may get more help
Regards,
Jude

Delivery number for a material document posted

Hi experts,
I need to delivery number for the material document number posted,
I tried to use the field XBLNR from the table MKPF
but i see that the feild is empty in the case of inbound delivery
why is it so.
How ever i can get the data from VBFA ,but can any one tell me the reason why XBLNR is empty in case of inbound delivery.
Thanks a lot in Advance.

Hi,
If you do GR w.r.t. Inbound Delivery No in MIGO then it will not update "Reference" field i.e. XBLNR.
To update same with Inbound Delivery No, you have to do "Post Goods Receipt" from Inbound Delivery Document itself in VL31N or VL32N.

During MIGO for Free goods documents posted in SPL in ECC6

Hi Friends,
In ECC6, when posting MIGO for free goods, document is being generated and posted in Special Purpose Ledger, but No Document is being generated for the same process in 4.6.
Can any one suggest the reason for the same.
Thanks

Dear Peeyoosh Jain
For inventory accounting, go to OBYC, click on Transaction BSX, give Chart of Accounts and execute so that you will see the respective G/L account would have been assigned there.
thanks
G. Lakshmipathi

Authorization for Task - Manual Document Posting

Hi All
We have have few tasks in our consol monitor like data collection, manual posing, validation, reclass etc. I want to restrict authorizaiton to users based on company and tasks. When I do so its perfectly working except for manual posting task. The system is allowing user to post manual posting of other company in which the user is not supposed to. I am wondering. The system is just ignoring manual posting task alone. Is there any tricky way to solve the issue for manual posting task?
I am currently using the objects R_UGMD_CHA, R_UGMD_SNG, R_UC_TASK combinations. It works fine except for manual document posting task. If any one got any suggestions, let me know to fix this problem.
Regards
A.Bharath

Note 610621 - SEM-BCS: Authorization check for the Manual Posting
During the execution of the Manual Posting the system by mistake checks the authorization for consolidation groups or consolidation units against value '#'. The system should check against the initial value instead.
For example, if you start a Manual Posting task, which posts on posting level 10, for a consolidation unit 'xyz', the system checks the authorization against the following values:
Consolidation unit = 'xyz'
Consolidation group = '#'
Instead of this, the system should check against the following values:
Consolidation unit = 'xyz'
Consolidation group = initial value
Other terms
Manual Posting, authorization check
Reason and Prerequisites
This problem is caused by a program error

Idoc for tcode MIRO ( invoice Posting)

Hi Experts!
I have to Post inbound idoc file to MIRO transaction.
Is there any standard inbound idoc for this purpose.
can you help me out with this
thanks

Hello!
Please, look at the INVOIC02 idoc.
Regards,
Albert

BAPI/FM for change Material Document Posting date

Hi Experts,
Is there any BAPI/FM for change a material document posting date.
Its urgnt.

Hi You can check the source code of MB02.
i doubt whether you can change the date , hope so you have to reverse the document asd post it again.
check & use MB_CHANGE_DOCUMENT at your own risk.

Create Outbound extended IDOC for venodr create & change (XK01 & XK02)

Dear all,
My requirement is as below:
I have to populate an extended IDOC of the standard IDOC CREMAS in the following cases.
1. When a new vendor is created from XK01 with classification characterstics value for supplier status as 'YES'.
2. When a vendor is changed by adding a partner function OA in the partner function.
3. We have to purposefully fail the IDOC when the partner function OA is deleted in XK02 transaction.
4. We have to purposefully fail the IDOC when the main vendor is blocked or deleted(XK05 or XK06).
Since i am new to IDOC, i tried many things but its not working.
I tried by the change pointer method for the standard IDOC but it will create the IDOC in all cases which we don't want it should be created only when supplier status is 'YES' and new partner function OA is created.
Regards,
Manjunath

hi,
I know how to extend an IDOC, but my question is after extending an IDOC i have to populate that outbound IDOC only in some cases.that is when a vendor is created with supplier status as YES, when a vendor is changed by adding an partner function.
I want these checks know where to make these checks before creating an outbound IDOC.i want to knaow a common point where i can make these checks like an exit.
i found 1 exit fo all the cases EXIT_SAPMF02K_001 but in this exit we will have the vendor number because it is exit before save.
Now i am looking into the FM 'MASTERIDOC_CREATE_CREMAS' in which we have an exit 'EXIT_SAPLKD01_001'.
Regards,
Manju

Inbound IDOC for sales orders not posting the configuration data

Hi all,
I am facing a problem in posting the inbound IDOC (message type ORDERS). The configuration data maintained in the parent segment E1CUCFG and in the segment E1CUVAL is not getting posted though i am passing the data in these segments which is 100% correct.
Can any one solve this problem

Hi Ravi,
Please check the two segments are active. You can do that in BD53.
In BD53 enter message type, and make the segments active.
If segments are active, it appears in white colour.
After this post the IDoc and check with segments.
If its useful, award points pls..
Regards,
Bharadwaj

Problem with Outbound EDI messages for shipping

Hi Experts,
we automatically generate the output SHAD (for shipment notification SHPADV) into the SD-transport.
We are facing the problem that sometimes the output works (green) and sometimes not (yellow).
When not, the status of the SHAD output is yellow and we can't find it into the VT70.
Any idea ?
PS: the SD-Transport has been generated into a Z-Programm and Batch Input.
With Regards,
David

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

Outbound EDI IDOCs for G/L document posting

Similar Messages

Maybe you are looking for