Outbound function module to post the data in to WMMBID02 IDOC

Hi Experts,
I am using standerd idoc WMMB1D02 to post the goods recipt data.
I am using the outbound idoc , how to post the data in to idoc using FM or BAPI ?.
please help me on this.
Thanks,
Venkat.

Hi Hakim ,
Thanks for tour replay , we are using the standerd message type and standerd idoc are WMMBXY,
WMMBID02. I did't notice any standerd FM or BAPI which will create the outbound idoc for the same.
please help me on this.
Thanks,
Venkat.

Similar Messages

Is there any function module to convert the date format

Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
       I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.

hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*"       IMPORTING
*"             VALUE(DATE) LIKE SY-DATUM
*"       EXPORTING
*"             VALUE(FORMATTED_DATE)
*"       EXCEPTIONS
*"              INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
        YYYY(4) TYPE C,
        MM(2) TYPE C,
        DD(2) TYPE C,
      END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
    DATE = DATE
EXCEPTIONS
    PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas

Function module to determine the date for the nth weekday of the mth month

Hey folks,
Is there a function module which determines the date for the mth weekday of the nth month in the pth year.
For instance, if I input 2nd thursday of the 4th month in 2008, it should return me, 04/10/2008 (MM/DD/YYYY).
Thanks and Best Regards,
Puja.

Hi Ravi,
Hadn't been able to work on this lately...You solution was quite close, but did not work for a few scenarios....I tweaked the logic a bit to take care of them as well...
So here goes the code:
================================================
DATA first_day_of_month TYPE datum.
DATA day TYPE p.
CONCATENATE year month '01' INTO first_day_of_month.
CALL FUNCTION 'DAY_IN_WEEK'
 EXPORTING
 datum = first_day_of_month
 IMPORTING
 wotnr = day.
DATA day_number TYPE numc2.
IF day = weekday.
 IF recur = 1.
 DATA ls_date(10) TYPE c.
 CONCATENATE month '/01/' year INTO ls_date.
 CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
 EXPORTING
 date_external = ls_date
 IMPORTING
 date_internal = date.
 ELSE.
 day_number = ( ( recur - 1 ) * 7 ) + 1.
 ENDIF.
ELSEIF day < weekday.
 day_number = ( ( recur - 1 ) * 7 ) + ( weekday - day ) + 1.
ELSE.
 day_number = ( ( recur - 1 ) * 7 ) + ( 7 - day ) + weekday + 1.
ENDIF.
IF date IS INITIAL.
 CONCATENATE year month day_number INTO date.
ENDIF.
====================================
There still could be some loopholes in this....am not sure....but it sure did seem to work for a couple of random checks that I performed.
Brownie points to you for giving me a direction.
Thanks,
Puja.

Function module to predict the date for a given date

hi friends,
is there any function module to predict the date
means for example if i enter one date , what will be the date
after 4 months(say) to the given date.
my requirement is when a person is hired today (10.06.2008)
and if he is under probationary for 6 months, then on what date he comes into the permenant employee's list(predicted date after date 6 months)

Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
   anzahl_jahre = 1
   anzahl_monate = 2
   anzahl_tage   = 3
   datum_ein     = '20010101'
IMPORTING
   datum_aus     = l_new_date.
   Result:
   l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.

Function module to change the date format

hi guys
is there any function module to change the date format
from 08/28/2007(mm/dd/yyyy)
to August 28, 2007.
regards
vamsi

hi vamsi.,
Use CONVERSION_EXIT_SDATE_OUTPUT to get the month name,
but it will give short form of the month name.
if you want long description of the month,
use this peice of code.
PARAMETERS: V_DATUM(07) TYPE C. "(example input:12-2007)
DATA: V_MON(2) TYPE C,
 V_YEAR(4) TYPE C,
 V_MONTHNAME(10) TYPE C,
 V_FULLDATE(30) type c.
WRITE V_DATUM+0(2) TO V_MON.
SELECT SINGLE LTX FROM T247 INTO V_MONTHNAME
WHERE SPRAS = SY-LANGU
 AND MNR = V_MON.
CONCATENATE V_MONTHNAME v_datum+3(4)
 INTO V_FULLDATE SEPARATED BY SPACE. "(example output : December 2007)
 write: v_fulldate.
Reawrd points if useful
Chandra

Function module to get the dates from the year and the period

Is there a function Module to get the dates from the year and the period

Check with :
To get last day of period use .
LAST_DAY_IN_PERIOD_GET.
To get last of month Use :
RE_LAST_DAY_OF_MONTH
HRVE_LAST_DAY_OF_MONTH
LAST_DAY_OF_MONTHS
ISB_PREVIOUS_PERIOD_DATE_GET
Thanks
Seshu

Function Module for Posting the Delivery Doument

Dear Experts,
Could you please send me the Function Module for Posting the Delivery Doument.
Thanks & Regards,
Ashok.

Hi,
What do you mean by POSTING the delivery document?
Are you mentioning the creation of Goods Issue?

Is there any function module to get the data from st06?

Hi,
I'm new to this forum.
I would like to know if there is a way (maybe some function modules) to collect information like system architecture, and databases as displayed in transaction st06?
I would like to call it from external program in order to view part of the data available in st06.
Thanks,
Erez Gordon.

have a look at function group SMON.
Not sure if these are remote enabled, otherwise create a wrapper function module (RFC).
Edited by: Micky Oestreich on Dec 11, 2008 9:37 AM

Variables passed to Function module for posting the Idoc

Hi,
For Posting the Inbound Idoc a Function module is created what should be the values passed to
1) return_variable and
2) workflow_result.
I saw in many of the program like this if there is an error in posting.
I gave return_variable-wf_param = ' Error Idoc'.
and workflow_result = '99999'.
Why are these values passed, where are they used.

Josephine,
In your parntner profile for your customer/vendor ( depending on your idoc type and business scenario) , you would have assigned the post processing permitted agent.
In case the function module errors out, these values are carried out to the WF container and appropriate post processing notifications are sent to the agents. That is the purpose of having these variables in here.
It could be a success/failure, agents are notified in either case.
Ganesh

Function Module to get the data like in LS26

Hi Gurus,
We are designing a new program and we need to get information about the "available stock", "putaway stock" and "pick quantity" for some storage types. So this is exactly what the LS26 shows.
Do you know any Function Module that can extract or calculate this information?
I would really appreciate any suggestion.
Thank you in advance
Edited by: Abel Raya on Jul 4, 2011 11:39 AM

I don't think there is a function module exists. But you can get the details from table LQUA for item details and LEIN for header records.

Function module to save the data from ALV list to MS Excel file

Hi,
I am displaying an ALV list.
I am assigning a pushbutton in the GUI status to save the list as a MS Excel file.
Can you please let me know the function module to achieve this task.
I tried 'SAP_CONVERT_TO_XLS_FORMAT' FM but it is giving some type confict error.
Thanks & Regards,
Balaji.R

ALV has this option built in, you may also find FM like [ALV_XXL_CALL|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=alv_xxl_call&adv=false&sortby=cm_rnd_rankvalue].
Can you elaborate a little more on your need, why adding an option that already exits?
Regards

Function module to find the date

Hi folks,
Is there a FM where in by using the current date I could calculate an earlier date which is 30 days less than the current one?
Thanks,
Sk

Hi,
If you want to use FM, try FM RP_CALC_DATE_IN_INTERVAL.
data: wa_date like sy-datum.
call function 'RP_CALC_DATE_IN_INTERVAL'
         exporting
              date      = sy-datum
              days      = 30
              months    = 0
              signum    = '-'
              years     = 0
         importing
              calc_date = wa_date.
write: / wa_date.
Regards,
Ferry Lianto

Function module to read the the idoc

Hi abap gurus,
 I have an inbound idoc coming form a wms system .The IDOC is for goods recieved . how can I read the idoc to update the inbound delivery data in the sap system ? Is there any function module to read the data from teh inbound idoc ?

Hi Gaurab,
Creating a Function Module (Direct Inbound Processing)
This step describes how to create a function module which is identified by the IDoc Interface using a new process code and called from ALE (field TBD52-FUNCNAME). Direct inbound processing using a function module (not using a workflow) always includes the ALE layer. This setting (processing with function module and ALE layer) is identified by the value 6 in the field TEDE2-EDIVRS, which is read by the function module IDOC_START_INBOUND. IDOC_START_INBOUND then calls ALE.
Prerequisites
You must have completed the required steps in Defining and Using a Basic Type .
Procedure
Choose Tools ® ABAP Workbench ® Development ® Function Builder, and create a new function module.
Create the segments as global data in your function group. The function module should copy the application data from the segments into the corresponding application tables and modify the IDoc status accordingly. If an error occurs, the function module must set the corresponding workflow parameters for exception handling.
Activate the function module: From the initial screen of the Function Builder select .
In the example, create the function module IDOC_INPUT_TESTER with a global interface. The function module is called when an IDoc of type TESTER01 is received for inbound processing. You will assign an application object ("standard order") to this IDoc type and therefore maintain tables from SD. To do this, call transaction VA01 using the command CALL TRANSACTION. Please note that the intention here is not to simulate a realistic standard order, but only to illustrate how data reaches application tables from an IDoc table via segment structures (form routine READ_IDOC_TESTER) and how the function module triggers an event for exception handling (by returning suitable return variables to the ALE layer in the FORM routine RETURN_VARIABLES_FILL).
A comprehensive example of the code for an inbound function module is provided in the ALE documentation in the SAP Library under Example Program to Generate an IDoc. This function module, for example, also checks whether the logical message is correct and calls a (fictitious) second function module which first writes the application data and then returns the number of the generated document. In addition, status 53 is only set if the application document was posted correctly.
Administration parameters for IDOC_INPUT_TESTER
Application abbreviation
V (Sales and Distribution)
Processing type
Normal, start immediately
Interface for IDOC_INPUT_TESTER (global interface)
Formal parameters
Reference structure
Explanation
Import parameters
INPUT_METHOD
BDWFAP_PAR-INPUTMETHD
Describes how the function module is to be processed (example: in the background)
MASS_PROCESSING
BDWFAP_PAR-MASS_PROC
Mass inbound processing? (indicator)
Export parameters
WORKFLOW_RESULT
BDWFAP_PAR-RESULT
Set to 99999 if an event is to be triggered for error handling.
APPLICATION_VARIABLE
BDWFAP_PAR-APPL_VAR
Variable freely available from application for workflow
IN_UPDATE_TASK
BDWFAP_PAR-UPDATETASK
Asynchronous update? (indicator is not set in example)
CALL_TRANSACTION_DONE
BDWFAP_PAR-CALLTRANS
Transaction called? (indicator is not set in example)
Table
IDOC_CONTRL
EDIDC
IDoc control record
IDOC_DATA
EDIDD
IDoc data records
IDOC_STATUS
BDIDOCSTAT
IDoc status records for ALE
RETURN_VARIABLES
BDWFRETVAR
IDoc assigned to Object type method parameters.
SERIALIZATION_INFO
BDI_SER
If several IDocs are to be processed in a certain sequence: this structure contains the necessary information
Example
FUNCTION IDOC_INPUT_TESTER.
""Globale Schnittstelle:
*" IMPORTING
*" VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*" VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*" VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*" VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*" VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*" VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*" IDOC_CONTRL STRUCTURE EDIDC OPTIONAL
*" IDOC_DATA STRUCTURE EDIDD
*" IDOC_STATUS STRUCTURE BDIDOCSTAT
*" RETURN_VARIABLES STRUCTURE BDWFRETVAR
*" SERIALIZATION_INFO STRUCTURE BDI_SER
initialize SET/GET Parameter and internal tables
PERFORM INITIALIZE_ORGANIZATIONAL_DATA.
Move IDOC to internal tables of application
PERFORM READ_IDOC_TESTER.
call transaction Order Entry VA01
PERFORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
set status value
perform write_status_record using errorcode.
return values of function module
PERFORM RETURN_VARIABLES_FILL USING ERRORCODE.
ENDFUNCTION.
FORM INITIALIZE_ORGANIZATIONAL_DATA.
initialize SET/GET parameters
 SET PARAMETER ID 'VKO' FIELD SPACE.
 SET PARAMETER ID 'VTW' FIELD SPACE.
 SET PARAMETER ID 'SPA' FIELD SPACE.
 SET PARAMETER ID 'VKB' FIELD SPACE.
 SET PARAMETER ID 'VKG' FIELD SPACE.
initialize internal tables
 REFRESH BDCDATA.
 CLEAR BDCDATA.
 CLEAR BELEGNUMMER.
 CLEAR ERRTAB.
 REFRESH ERRTAB.
 REFRESH XBDCMSGCOLL.
 CLEAR XBDCMSGCOLL.
ENDFORM. " INITIALIZE_ORGANIZATIONAL_DATA
FORM READ_IDOC_TESTER.
PERFORM INITIALIZE_IDOC.
LOOP AT IDOC_DATA
 WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
 CASE IDOC_DATA-SEGNAM.
header data
 WHEN 'E1HEAD'.
 MOVE IDOC_DATA-SDATA TO E1HEAD.
 PERFORM PROCESS_SEGMENT_E1HEAD.
position data
 WHEN 'E1ITEM'.
 MOVE IDOC_DATA-SDATA TO E1ITEM.
 PERFORM PROCESS_SEGMENT_E1ITEM.
 ENDCASE.
ENDLOOP.
only when there were one or more items
CHECK FIRST NE 'X'.
APPEND XVBAP. "last one
ENDFORM. " READ_IDOC_TESTER
FORM INITIALIZE_IDOC.
CLEAR XVBAK.
REFRESH XVBAP.
CLEAR XVBAP.
POSNR = 0.
FIRST = 'X'.
ENDFORM. " INITIALIZE_IDOC
FORM PROCESS_SEGMENT_E1HEAD.
requested date of delivery
WLDAT = E1HEAD-WLDAT.
delivery date
XVBAK-BSTDK = E1HEAD-BSTDK.
customer number
XVBAK-KUNNR = E1HEAD-AUGEB.
order number
XVBAK-BSTNK = E1HEAD-BELNR.
division
XVBAK-SPART = E1HEAD-SPART.
distribution channel
XVBAK-VTWEG = E1HEAD-VTWEG.
sales organization
XVBAK-VKORG = E1HEAD-VKORG.
order type
XVBAK-AUART = E1HEAD-AUART.
do not fill incoterms (inco1, inco2)
customer function
CALL CUSTOMER-FUNCTION '001'
 EXPORTING
 PI_VBAK621 = XVBAK
 IMPORTING
 PE_VBAK621 = XVBAK
 TABLES
 PT_IDOC_DATA_RECORDS = IDOC_DATA.
ENDFORM. " PROCESS_SEGMENT_E1HEAD
FORM PROCESS_SEGMENT_E1ITEM.
position number
XVBAP-POSNR = XVBAP-POSNR + 1.
amount
XVBAP-WMENG = E1ITEM-MENGE.
unit
CALL FUNCTION 'ISO_TO_SAP_MEASURE_UNIT_CODE'
 EXPORTING
 ISO_CODE = E1ITEM-BMEINH
 IMPORTING
 SAP_CODE = XVBAP-VRKME
 EXCEPTIONS
 OTHERS = 0.
material number
XVBAP-MATNR = E1ITEM-LMATNR.
CALL CUSTOMER-FUNCTION '002'
 EXPORTING
 PI_VBAP621 = XVBAP
 IMPORTING
 PE_VBAP621 = XVBAP
 TABLES
 PT_IDOC_DATA_RECORDS = IDOC_DATA.
APPEND XVBAP.
ENDFORM. " PROCESS_SEGMENT_E1ITEM
FORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
call transaction first dynpro
PERFORM DYNPRO_START.
call transaction double-line entry
PERFORM DYNPRO_DETAIL2.
incoterms
PERFORM DYNPRO_HEAD_300.
call transaction item datas
PERFORM DYNPRO_POSITION.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'SICH'.
determine input method
IF INPUT_METHOD IS INITIAL.
 INPUT_METHOD = 'N'.
ENDIF.
call transaction VA01
CALL TRANSACTION 'VA01' USING BDCDATA
 MODE INPUT_METHOD
 UPDATE 'S'
 MESSAGES INTO XBDCMSGCOLL.
errorcode = SY-SUBRC. " remember returncode for status update
ENDFORM. " CALL_VA01_IDOC_ORDERS
form write_status_record using errorcode.
FILL IDOC_STATUS
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF ERRORCODE = 0.
IDOC_STATUS-STATUS = BELEG_GEBUCHT. "value 53
 GET PARAMETER ID 'AUN' FIELD BELEGNUMMER.
 IDOC_STATUS-MSGID = 'V1'.
 IDOC_STATUS-MSGNO = '311'.
 IDOC_STATUS-MSGV1 = 'Terminauftrag'.
 IDOC_STATUS-MSGV2 = BELEGNUMMER.
ELSE.
 IDOC_STATUS-STATUS = BELEG_NICHT_GEBUCHT. "value 51
 IDOC_STATUS-MSGID = SY-MSwGID.
 IDOC_STATUS-MSGNO = SY-MSGNO.
 IDOC_STATUS-MSGV1 = SY-MSGV1.
 IDOC_STATUS-MSGV2 = SY-MSGV2.
 IDOC_STATUS-MSGV3 = SY-MSGV3.
 IDOC_STATUS-MSGV4 = SY-MSGV4.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM.
FORM DYNPRO_START.
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
 DYNPRO-EINSTIEG
 CHANGING LAST_DYNPRO.
ordertype
PERFORM DYNPRO_SET USING 'VBAK-AUART' XVBAK-AUART.
sales organization
PERFORM DYNPRO_SET USING 'VBAK-VKORG' XVBAK-VKORG.
Distribution channel
PERFORM DYNPRO_SET USING 'VBAK-VTWEG' XVBAK-VTWEG.
Division
PERFORM DYNPRO_SET USING 'VBAK-SPART' XVBAK-SPART.
Sales office
PERFORM DYNPRO_SET USING 'VBAK-VKBUR' XVBAK-VKBUR.
Sales group
PERFORM DYNPRO_SET USING 'VBAK-VKGRP' XVBAK-VKGRP.
ENDFORM. " DYNPRO_START
FORM DYNPRO_NEW USING PROGNAME
 DYNPRONR
 CHANGING LAST_DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGNAME.
BDCDATA-DYNPRO = DYNPRONR.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
LAST_DYNPRO = DYNPRONR.
ENDFORM. " DYNPRO_NEW
FORM DYNPRO_SET USING FELDNAME
 FELDINHALT.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
dynpro field name
BDCDATA-FNAM = FELDNAME.
contents
BDCDATA-FVAL = FELDINHALT.
APPEND BDCDATA.
ENDFORM. " DYNPRO_SET
FORM DYNPRO_DETAIL2.
okcode
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-UER2.
fix dynpro number 4001
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
 '4001'
 CHANGING LAST_DYNPRO.
order party
PERFORM DYNPRO_SET USING 'KUAGV-KUNNR' XVBAK-KUNNR.
purchase order number
PERFORM DYNPRO_SET USING 'VBKD-BSTKD' XVBAK-BSTNK.
requested delivery date
PERFORM DYNPRO_DATE_SET USING 'VBKD-BSTDK' XVBAK-BSTDK.
purchase order date
PERFORM DYNPRO_DATE_SET USING 'RV45A-KETDAT' WLDAT.
ENDFORM. " DYNPRO_DETAIL2
FORM DYNPRO_DATE_SET USING FELDNAME
 FELDINHALT.
DATA: DATE TYPE D.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
BDCDATA-FNAM = FELDNAME.
WRITE FELDINHALT TO DATE.
BDCDATA-FVAL = DATE.
APPEND BDCDATA.
ENDFORM. " DYNPRO_DATE_SET
FORM DYNPRO_HEAD_300.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-KKAU.
incoterms part 1
IF NOT XVBAK-INCO1 IS INITIAL.
 PERFORM DYNPRO_SET USING 'VBKD-INCO1' XVBAK-INCO1.
ENDIF.
incoterms part 2
IF NOT XVBAK-INCO2 IS INITIAL.
 PERFORM DYNPRO_SET USING 'VBKD-INCO2' XVBAK-INCO2.
ENDIF.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'BACK'.
ENDFORM. " DYNPRO_HEAD_300
FORM DYNPRO_POSITION.
LOOP AT XVBAP.
dynpro item double line entry
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'UER2'.
 IF XVBAP-POSNR = 1.
material number
 PERFORM DYNPRO_SET USING 'VBAP-MATNR(01)' XVBAP-MATNR.
order quantity
 PERFORM DYNPRO_SET USING 'RV45A-KWMENG(01)' XVBAP-WMENG.
desired delivery date
 PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(1)' WLDAT.
sales unit
 PERFORM DYNPRO_SET USING 'VBAP-VRKME(1)' XVBAP-VRKME.
 ELSE.
 PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'POAN'.
material number
 PERFORM DYNPRO_SET USING 'VBAP-MATNR(02)' XVBAP-MATNR.
order quantity
 PERFORM DYNPRO_SET USING 'RV45A-KWMENG(02)' XVBAP-WMENG.
desired delivery date
 PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(02)' WLDAT.
sales unit
 PERFORM DYNPRO_SET USING 'VBAP-VRKME(02)' XVBAP-VRKME.
 ENDIF.
ENDLOOP.
ENDFORM. " DYNPRO_POSITION
FORM RETURN_VARIABLES_FILL USING ERRORCODE.
allocate IDOC numbers to Workflow output parameters
IF MASS_PROCESSING <> SPACE.
 IF ERRORCODE = 0.
 RETURN_VARIABLES-WF_PARAM = PID.
 RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
 APPEND RETURN_VARIABLES.
 RETURN_VARIABLES-WF_PARAM = APO.
 RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
 APPEND RETURN_VARIABLES.
 WORKFLOW_RESULT = C_WF_RESULT_OK.
 ELSE.
 RETURN_VARIABLES-WF_PARAM = EID.
 RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
 APPEND RETURN_VARIABLES.
 WORKFLOW_RESULT = C_WF_RESULT_ERROR.
 ENDIF.
ELSE.
 IF ERRORCODE = 0.
 RETURN_VARIABLES-WF_PARAM = APE.
 RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
 APPEND RETURN_VARIABLES.
 WORKFLOW_RESULT = C_WF_RESULT_OK.
 ELSE.
 WORKFLOW_RESULT = C_WF_RESULT_ERROR.
 ENDIF.
ENDIF.
ENDFORM. " RETURN_VARIABLES_FILL
Globale Daten von IDOC_INPUT_TESTER
TABLES: E1HEAD, E1ITEM.
DATA: BEGIN OF BDCDATA OCCURS 500.
 INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF XVBAK. "Kopfdaten
 INCLUDE STRUCTURE VBAK621.
DATA: END OF XVBAK.
DATA: BEGIN OF XVBAP OCCURS 50. "Position
 INCLUDE STRUCTURE VBAP.
DATA: WMENG(18) TYPE C.
DATA: LFDAT LIKE VBAP-ABDAT.
DATA: KSCHL LIKE KOMV-KSCHL.
DATA: KBTRG(16) TYPE C.
DATA: KSCHL_NETWR LIKE KOMV-KSCHL.
DATA: KBTRG_NETWR(16) TYPE C.
DATA: INCO1 LIKE VBKD-INCO1.
DATA: INCO2 LIKE VBKD-INCO2.
DATA: YANTLF(1) TYPE C.
DATA: PRSDT LIKE VBKD-PRSDT.
DATA: HPRSFD LIKE TVAP-PRSFD.
DATA: END OF XVBAP.
DATA: BEGIN OF DYNPRO,
 EINSTIEG LIKE T185V-DYNNR VALUE 101,
 KKAU LIKE T185V-DYNNR,
 UER2 LIKE T185V-DYNNR,
 KBES LIKE T185V-DYNNR,
 ERF1 LIKE T185V-DYNNR,
 PBES LIKE T185V-DYNNR,
 PKAU LIKE T185V-DYNNR,
 PEIN LIKE T185V-DYNNR,
 EID1 LIKE T185V-DYNNR,
 POPO LIKE T185V-DYNNR,
 EIPO LIKE T185V-DYNNR,
 KPAR LIKE T185V-DYNNR,
 PSDE LIKE T185V-DYNNR,
 PPAR LIKE T185V-DYNNR,
 KDE1 LIKE T185V-DYNNR,
 KDE2 LIKE T185V-DYNNR,
 PDE1 LIKE T185V-DYNNR,
 PDE2 LIKE T185V-DYNNR,
 PKON LIKE T185V-DYNNR,
 END OF DYNPRO.
DATA: BEGIN OF PANEL,
 KKAU LIKE T185V-PANEL VALUE 'KKAU',
 UER2 LIKE T185V-PANEL VALUE 'UER2',
 KBES LIKE T185V-PANEL VALUE 'KBES',
 ERF1 LIKE T185V-PANEL VALUE 'ERF1',
 PBES LIKE T185V-PANEL VALUE 'PBES',
 PKAU LIKE T185V-PANEL VALUE 'PKAU',
 PEIN LIKE T185V-PANEL VALUE 'PEIN',
 EID1 LIKE T185V-PANEL VALUE 'EID1',
 EIAN LIKE T185V-PANEL VALUE 'EIAN',
 POPO LIKE T185V-PANEL VALUE 'POPO',
 EIPO LIKE T185V-PANEL VALUE 'EIPO',
 KPAR LIKE T185V-PANEL VALUE 'KPAR',
 PSDE LIKE T185V-PANEL VALUE 'PSDE',
 POAN LIKE T185V-PANEL VALUE 'POAN',
 PPAR LIKE T185V-PANEL VALUE 'PPAR',
 KDE1 LIKE T185V-PANEL VALUE 'KDE1',
 KDE2 LIKE T185V-PANEL VALUE 'KDE2',
 PDE1 LIKE T185V-PANEL VALUE 'PDE1',
 PDE2 LIKE T185V-PANEL VALUE 'PDE2',
 PKON LIKE T185V-PANEL VALUE 'PKON',
 KOAN LIKE T185V-PANEL VALUE 'KOAN',
 END OF PANEL.
DATA: BEGIN OF ERRTAB OCCURS 20,
 TRANS LIKE TSTC-TCODE,
 ARBGB LIKE T100-ARBGB,
 CLASS(1) TYPE C,
 MSGNR LIKE T100-MSGNR,
 TEXT LIKE T100-TEXT,
 TEXT(123) TYPE C,
 MSGV1 LIKE SY-MSGV1,
 MSGV2 LIKE SY-MSGV2,
 MSGV3 LIKE SY-MSGV3,
 MSGV4 LIKE SY-MSGV4,
 END OF ERRTAB.
*---- Hilfsfelder -
DATA: PROGRAMM_AUFTRAG LIKE T185V-AGIDV VALUE 'SAPMV45A'.
DATA: LAST_DYNPRO LIKE T185V-DYNNR,
 WLDAT LIKE VBAK-BSTDK,
 POSNR LIKE VBAP-POSNR,
 FIRST(1) TYPE C VALUE 'X'.
DATA: BEGIN OF XBDCMSGCOLL OCCURS 10.
 INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF XBDCMSGCOLL.
Terminauftrag ( Auftragsart wird fest gesetzt !)
DATA: BELEGNUMMER LIKE VBAK-VBELN.
DATA: ERRORCODE LIKE SY-SUBRC.
Statuswerte fuer IDOC-Status
DATA: BELEG_NICHT_GEBUCHT LIKE TEDS1-STATUS VALUE '51'.
DATA: BELEG_GEBUCHT LIKE TEDS1-STATUS VALUE '53'.
*- Direktwerte für Return_variables -
data:
 eid like bdwfretvar-wf_param value 'Error_IDOCs',
 pid like bdwfretvar-wf_param value 'Processed_IDOCs',
 apo like bdwfretvar-wf_param value 'Appl_Objects',
 ape like bdwfretvar-wf_param value 'Appl_Object'.
*- Direktwerte für Workflow_Result -
DATA: C_WF_RESULT_ERROR LIKE BDWFAP_PAR-RESULT VALUE '99999'.
thanks
karthik
DATA: C_WF_RESULT_OK LIKE BDWFAP_PAR-RESULT VALUE '0'.

Function module for posting idoc

Hi,
For Inbound Idoc
In function module for posting the Idoc what should be given as the return_variable.

Hi,
it depends on application.i have written some piece of code for my requiremnt.chek it,may be it will help u.
FORM idoc_status_ord_change
 TABLES idoc_data STRUCTURE edidd
 idoc_status STRUCTURE bdidocstat
 r_variables STRUCTURE bdwfretvar
 USING idoc_contrl LIKE edidc
 value(retn_info) LIKE bapiret2
 status LIKE bdidocstat-status
 wf_result LIKE bdwf_param-result.
CLEAR idoc_status.
idoc_status-docnum = idoc_contrl-docnum.
idoc_status-msgty = retn_info-type.
idoc_status-msgid = retn_info-id.
idoc_status-msgno = retn_info-number.
idoc_status-appl_log = retn_info-log_no.
idoc_status-msgv1 = retn_info-message_v1.
idoc_status-msgv2 = retn_info-message_v2.
idoc_status-msgv3 = retn_info-message_v3.
idoc_status-msgv4 = retn_info-message_v4.
idoc_status-repid = sy-repid.
idoc_status-status = status.
APPEND idoc_status.
IF idoc_status-status = '51'.
 wf_result = '99999'.
 r_variables-wf_param = 'Error_IDOCs'.
 r_variables-doc_number = idoc_contrl-docnum.
 READ TABLE r_variables FROM r_variables.
 IF sy-subrc <> 0.
 APPEND r_variables.
 ENDIF.
ELSEIF idoc_status-status = '53'.
 CLEAR wf_result.
 r_variables-wf_param = 'Processed_IDOCs'.
 r_variables-doc_number = idoc_contrl-docnum.
 READ TABLE r_variables FROM r_variables.
 IF sy-subrc <> 0.
 APPEND r_variables.
 ENDIF.
ENDIF.
regards,
nagaraj

Function module to get the configuration of Individual objects

Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.

Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM

Outbound function module to post the data in to WMMBID02 IDOC

Similar Messages

Maybe you are looking for