Outbound FXO calls based on Signal detection

Hi Team,
FXO and outbound calls while the line not connected to the FXO port, is there a way to do signal detection so the call will jump to the next fxo port

For outbound call hunting you can use Trunk groups. You can assign multiple fxo ports to the trunk group and assign them priorty etc. From your dial-peer reference the trunk group and it will hunt the available line.
Refer to: http://www.cisco.com/en/US/docs/ios/12_3/vvf_r/vrg_t1_ps1839_TSD_Products_Command_Reference_Chapter.html#wp1491022
Also Refer: https://supportforums.cisco.com/discussion/12056631/need-sample-cme-multiple-fxo-ports-hunt-fashion
-Terry
Please rate all helpful posts and mark thread as answered if you have no other queries.

Similar Messages

UCCX 7.0: Outbound IVR call based on datetime

Hi,
I want to know can I dial my customers (through UCCX Outbound Subsystem) from the dialing list where datetime is included and I want to dial them at that particular datetime.
The idea came from like example, I want to wish birthday to someone at particular datetime in future but the database entry can be at anytime.
I know the dialer dials the list of numbers simultaneously based on the number of ports configured, but how can I schedule them?
Any help please?
Thanks,
Mijanur Rahman

Hi, I have designed a script for outbound dialing with 'place call' node and wth HTTP Trigger. It's working fine when i'm triggering that application from IE or FireFox.
Now my plan is to create an application using html or java which will watch the the database with timer function each after 30 seconds and will hit the http trigger only when the current server time will match.
Will keep you posted if I got succeed.
Thanks,
Mijanur Rahman

Email triggering an external or outbound phone call

Hello,
I have an enterprise client with CVP, ICM 8.x etc. They have helpdesk ticketing system that generates emails. We would like to create or trigger an outbound call that just plays a wav file or connects to an IVR.
I would like to know if you have done any thing within ICM that can do this (create outbound call based on email trigger) or if there is 3rd party that can do this and if needed connect the outbound call to ICM.
Thanks,
Baseer.

Hi,
can you please give us more details. Is it only one email address or multiple ones? A simple text email or rich text or HTML? Are we looking for a certain keyword in the email?
There's no built in email trigger functionality in UCCE. But you can certainly intercept emails when they arrive, provided you have a simple script that can do telnet - for instance, if your email server has got POP3 or IMAP access, I can imagine a simple Java application (JavaMail rocks ) that would connect to the email server, get the list of new emails, perform some text search (it may be necessary to distinguish "legal" emails from the ones that arrived by mistake, like spam).
I did a similar project a couple of years ago. A monitoring system sent an email, it created an issue in JIRA, and also rang our mobile phone saying something like "Major/Minor alarm at customer site XY".
G.

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

How to block calls based ANI for individual user?

I want to know how to block calls based on ANI for individual user in CUCM? Lets say if the individual wants to block calls from certain number.
Malicious call id - softkey will not work for our purpose.
calls come to cucm via mgcp gateway. cucm 9.x
thanks,

How to block calls has been asked hundreds, and hundreds of times at CSC, a simple search would have provided you with all the necesarry information. Please search before you ask
https://supportforums.cisco.com/docs/DOC-19628
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

HDMI to DVI No Signal Detected

I have a late 2006 MacBook Pro running OS X 10.6.6. I recently purchased an LG LED-LCD television as well as a HDMI to DVI adaptor cable, both from Amazon (the cable is an Amazon Basics cable). When plugged in to both the laptop and the television, there is no signal detected by the television and no display detected by the laptop. I've tried each of the three HDMI ports on the television, but to no avail. I returned the cable and exchanged it for an identical one, but the problem persists.
In searching through the forums, I've seen that quite a few people have had issues with this same setup, and I'm wondering if somehow I need more than just the cable to connect to my television (which doesn't make sense, but could still be the case). I've run a diagnostic on my laptop during startup, and found no issues with the hardware, so I'm 99% positive that I don't have a bum DVI port. At this point I'm just not sure what to do to get this to work, so any assistance would be wonderful.

Sorry for any confusion, my last post was sent before reading your second post.
The VGA test proves nothing about the DVI output. The DVI ports on these Macbook Pros is a combo DVI and analog VGA port (DVI-A). The DVI-VGA adapter does nothing more than connect the VGA to VGA, and does not convert the DVI to VGA. You have to use an actual DVI device to test the DVI. The 4 pins and large blade on the end of the DVI connector are the VGA pins - they can be omitted on a DVI-HDMI adapter with no harm.
I really don't know if there could be a problem with the software on the Mac and/or TV, and the cable just fine.
Perhaps try to seek out someone who has a working DVI-HDMI cable to try? Or try a store that will demonstrate that it works and has a money back guarantee?

MSI gtx 770 twinfrozr "no signal detected"

Hello!
Just got a new GPU and installed it and all, but when i´m starting my system my monitor doesn´t start and just show a box with the text " no signal detected" and then goes black.
The system sounds normal and every fan starts but still the monitor seems to not be connected even when i have tested 3 differnet with different cables. Also my old GPU won´t work anymore and acts the same as the new.
i have changed RAMs and reseted bios with the cmos battery but still no succes, so please help!
Regards Hugo
Specs:
Board: MSI P67A-GD55
Bios: unknown
VGA: MSI 770GTX Twin Frozr
PSU: Corsair VX550
Intel Core i5-2500K Sandy Bridge 3.3GHz
MEM: Corsair 2x2 4gb cl9 1600 mhz
HDD: random 500gb
COOLER: cooler master hyper 212 evo
OS: Windows 7 64bit ultimate

Quote from: Svet on 15-November-13, 04:21:38
then the problem is not in the video card
try >>Clear CMOS Guide<< with power cord removed and use your old VGA card to try to boot.
what is your old VGA card?
unfortunatly no succes, still the same but im gonna try annother monitor just to be sure

How to get info from imported file in an outbound campaign IVR-based. UCCX 8.5.

Hello.
Somebody knows if it is possible to get the information inside my ivr script from the file imported when I create an outbound campaign IVR-based?
I want to store in variable data like first name, last name, account number... And use them in the flow of my IVR script.
I´m using UCCX 8.5.
Regards

did you get this to work ?

MBP connected to Sony LCD 46X350A - No Signal Detected

Need help.
I've tried connecting my MBP to my Sony LCD via the VGA output (I believe that's what it is), via the cable supplied when I bought my notebook, but the message on the LCD says no signal detected.
I've went into the System Preferences, Displays and the MBP definitely recognizes that it is connected to the LCD, but I cannot get any picture (No Signal Detected Message on LCD) either by mirroring or using the LCD as an external monitor.
Any thoughts or suggestions from anyone?
Many thanks in advance.

Im having a very similar issue. I was happily using my MBP with an external Acer Display connected, until that display simply stopped working. It now only says 'No Signal' before shutting off. Zapping the PRAM and the SMC didn't get me anywhere, so I'll be taking it to the Mac Store tonight. I'll post what they'll tell me!

No Signal Detected?

WOw when finally the iTune Store works on my iPhone, a new problem appears, now my iPhone is connected and says:
*" Activation Alert"*
"No Signal detected. Signal is required to complete activation."
The sync is in progress but i dont know if it's really in progress. Does anyone has the same problem??

I got that too. But it seeems to be working OK so far. It took sime time and the iphone restarted and now it is syncing. Hope this helps!

IDOC no. for outbound JIT calls

Hi,
I need to extract idoc number for all outbound jit calls that I can view in Outbound JIT call monitor.Can anyone please tell me that which table is used to store the generated idoc no. for a particular call/component group in a call.
Thanks,
Gauri

Hello,
There is one transaction code BDM2 which is the link between the INBOUND IDOC and the OUTBOUND IDOC
I never used this transaction, but try
OR as an alternative
There is a Function module SREL_GET_NEXT_NEIGHBOR
Goto the Transaction code SE37 and give this FM
OBJECT-OBJKEY = <IDoc number, 16-digits>
OBJECT-OBJTYPE = 'IDOC'
MAX_HOPS = '99'
and execute
it will give the Outbound idocs for the inbound idocs
I hope this will solve your requirement.
regards,
santosh

Route call based on source IP address

Hello Guys,
Is there a way to route calls based on source IP address?
I want to redirect calls to specific queues based on the ip of the phone who's starting it.
Any ideas?
Thanks in advance.
Filipe Leite

Hi Filipe
I'm assuming here that you are using CallManager rather than CME?
One option might be to use the 'device mobility' feature to assign a specific CSS to devices based on their IP subnet. That CSS could have the appropriate partitions to route to a seperate trigger that directs calls to a separate CSQ.
Of course, whether you can do this depends on whether it would be appropriate to override the device CSS in this way.
Aaron

Getting invalid-attribute-value Error during Delta Import on Call-based ECMA2

I'm developing an ECMA2 MA to which supports delta imports. I have found very few samples of working code to do delta imports, so my attempts are created
using a lot of trial and error... Any samples of working Call based MA's with delta support would be much appreciated :-)
The data is located in a SQL server and the schema (for delta) is like this (simplified):
EmpID string
Status string
UPDATESTATUS string (<-- This is the update column with values New/Update/Delete)
For each EmpID, there may be multiple Status values, i.e. Status should be imported into a multi value attribute in FIM.
For the full import this is working as expected, but I run into issues when attempting to do the delta imports
The code for the delta import
private
GetImportEntriesResults GetImportEntries_Delta(GetImportEntriesRunStep importRunStep)
GetImportEntriesResults importReturnInfo;
List<CSEntryChange> csentries =
new List<CSEntryChange>();
string employeeID =
null;
string appStatus =
null;
string currEmployeeID =
CSEntryChange csentry =
null;
List<string> appStatusList =
new List<string>();
string changeMode =
for (int i = currentReadRecord; i <= da.Tables["AppStatus"].Rows.Count - 1; i++)
if (currEmployeeID != da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim())
if (currEmployeeID !=
"") // this should be true except for the first run
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
csentries.Add(csentry);
appStatusList = new
List<string>();
if (csentries.Count >= m_importPageSize)
              currentReadRecord = i;
importReturnInfo = new
GetImportEntriesResults();
importReturnInfo.MoreToImport = (i <= da.Tables["AppStatus"].Rows.Count - 1);
importReturnInfo.CSEntries = csentries;
return importReturnInfo;
changeMode = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(2).ToString().Trim();
csentry = CSEntryChange.Create();
csentry.ObjectType = "ApplicationIdentity";
employeeID = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim();
currEmployeeID = (string)employeeID;
switch (changeMode)
case "New":
csentry.ObjectModificationType = ObjectModificationType.Add;
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeAdd("EmployeeID", employeeID));
break;
case "Update":
csentry.ObjectModificationType = ObjectModificationType.Update;
csentry.DN = employeeID;
break;
case "Delete":
csentry.ObjectModificationType = ObjectModificationType.Delete;
                     csentry.DN = employeeID;
break;
default:
throw new
UnexpectedDataException(string.Format("Unknown modification type: {0}", changeMode));
appStatus = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(1).ToString().Trim();
appStatusList.Add(appStatus);
// save the last object
if (csentry != null)
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
csentries.Add(csentry);
importReturnInfo = new
GetImportEntriesResults();
importReturnInfo.MoreToImport = false;
importReturnInfo.CSEntries = csentries;
return importReturnInfo;
The code compiles and executes, but the delta import fails with the "invalid-attribute-value" message per csentry.
From the eventlog I have the following message
The server encountered an unexpected error while performing an operation for a management agent.
"System.InvalidCastException: Unable to cast object of type 'System.Collections.Generic.List`1[System.String]' to type 'System.String'.
   at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.AddAttributeToDImage(CDImage* pdimage, String attributeName, AttributeModificationType
attributeModificationType, IList`1 attributeValueChanges, Int32 escapeReferenceDNValues)
   at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.ConvertToDImage(CSEntryChange csEntryChange, CDImage** ppDImage, Int32 escapeReferenceDNValues)
   at Microsoft.MetadirectoryServices.Impl.ScriptHost.InvokeExtMA_ImportEntry(UInt32 cBatchSize, UInt16* pcszCustomData, UInt32 cFullObject,
_OCTET* rgoctFullObject, UInt32* rgomodt, UInt32* pcpcszChangedAttributes, UInt16*** prgpcszChangedAttributes, Int32 fIsDNStyleNone, UInt16** ppszUpdatedCustomData, _OCTET* rgoctCSImage, Int32* rgextec, UInt16** rgpszErrorName, UInt16** rgpszErrorDetail, Int32*
pfMoreToImport)"
To me it seems as if FIM is unable to process the List of strings that is returned when processing the delta. Remember that this works OK when doing the full import.
Do you have any suggestions as to why this fails?
Kjetil

Hi,
Thank you Søren! I got some good clues for the right direction from your answer. If anyone would be looking same answers the correct solution would be down below. I hope it would be help for someone else too.
Get-Shema.ps1
$obj
= New-Object
-Type PSCustomObject
$obj
| Add-Member
-Type NoteProperty
-Name "Anchor-Id|String"
-Value 1
$obj
| Add-Member
-Type NoteProperty
-Name "objectClass|String"
-Value "user"
$Obj
| Add-Member
-Type NoteProperty
-Name "IsLicensed|Boolean"
-Value $true
$Obj
| Add-Member
-Type NoteProperty
-Name "FirstName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "LastName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "mail|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "immutableId|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "DisplayName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "UsageLocation|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "ProxyAddresses|String[]"
-Value ("","")
$Obj
| Add-Member
-Type NoteProperty
-Name "Licenses|String[]"
-Value ("","")
$obj
Import.ps1
#Always pass objects as hash table in pipeline
foreach ($User
in $Users)
$obj = @{}
$obj.Add("Id",
$User.UserPrincipalName)
$obj.Add("objectClass",
"user")
$obj.Add("IsLicensed",
$User.IsLicensed)
$obj.Add("FirstName",
$User.FirstName)
$obj.Add("LastName",
$User.LastName)
$obj.Add("mail",
$User.UserPrincipalName)
$obj.Add("immutableId",
$User.immutableId)
$obj.Add("DisplayName",
$User.DisplayName)
$obj.Add("UsageLocation",
$User.UsageLocation)
$obj.Add("ProxyAddresses", ($User.ProxyAddresses
-ne ""))
$obj.add("Licenses", ($User.Licenses.AccountSkuId))
$obj
Marti

ICM 7.5-how to get individual outbound dialer calls talktime and respective ECC values

Hello,
I'm looking for following two items
1. Outbound dialer calls talktime in each call.
2. Each calls respective ECC values.
I have tried to get talktime from TCD table it’s shows zero value.
Please advice how to get above values, it would be much appreciated.
Thanks
Regards,
Param

Hey Param,
You can use the PeripheralCallType in the TCD table to find dialer calls. Look for calls with:
PeripheralCallType IN ('27','28','29','30','31') for reservation calls and
PeripheralCallType IN ('32','33','34','35') for the customer calls
For duration of reservation calls look at the HoldTime value
For duration of the customer call you can look at the HoldTime + TalkTime + WorkTime for a total handle time for the customer leg of the dialer call
If you want to look at the ECC variables that were associated with that call you will have to lookup the Termination_Call_Variable table matching:
Termination_Call_Variable.TCDRecoveryKey = Termination_Call_Detail.RecoveryKey
Cheers,
Nathan

Redirect Calls Based on Calling Party Number

Hi All,
I am looking for a method to redirect inbound PSTN calls based on the calling party number. I can do this in CUCM 9 or IOS. I find plenty of documentation out there on blocking calls by calling party number but nothing on redirecting.
My situation is this. We are a large company and often get request from users to block calls from annoying or harassing numbers. Rather than block them I would like to drive them into a mailbox where the caller can attempt to find a resolution if they feel the calls was blocked in error.
Has anyone else attempted something like this?
Thanks

Hi Jerold,
If you are using CUCM 8.x and above, you can re-direct the call on the basis of the calling party number.
The configuration is very similar to block a call that uses the new feature added in CUCM 8.x and above (
Route Next Hop By Calling Party Number). The step 8 in the following document explains how to handle the call when the call has be routed by the calling party number. The translation pattern is configure with Route Option as "Block this pattern".
https://supportforums.cisco.com/docs/DOC-18367
In order to re-direct the call, you can configure the Route Option with "Route this pattern" and specify the desired destination pattern under "Called party Transformation Mask". Also, make sure to add the appropriate CSS to be able to route the call.
HTH,
Jagpreet Singh Barmi

Outbound FXO calls based on Signal detection

Similar Messages

Maybe you are looking for