Outbound_hdlr leads to error \x2fwebdynpro\x2fssr\x2fSAPWebFramework.js\x22\x3e\x3c\x2fscript\x3e\x3cscript\x20language\x3d\x22JavaScript\x22\x20type\x3d\x22

Dear SRM Gurus, we are Setting up a completely new SRM-System. When calling a catalog, we get above page dislayed in the browser. Has anybody seen this error before? Thanks and best regards Julian

Dear Laurent,
thanks for your quick response.
I have attached a screenshot. This screenshot appears, when we call the web service (catalog) from the SRM Shopping cart.
The strange thing, the error appears with all our test-catalogs that work completely well in our other SRM-Systems.
Thanks and best regards
Julian

Similar Messages

Portege 3500 - 512MB memory modules lead to error

Hallo,
I tried to upgrade the memory in my P3500.
currently there is 1 256MB module installed in the slot beneath the keyboard.
I purchased 2x 512MB SO-DIMM PC133 ram modules, but both lead to errors / BIOS-beeps. I tried different combinations:
keyboard-slot: 512
bottom-slot: empty
--> long short
keyboard-slot: empty
bottom-slot: 512
--> long short short
keyboard-slot: 512
bottom-slot: 256
--> long short
keyboard-slot: 256
bottom-slot: 512
--> long short short
keyboard-slot: 512
bottom-slot: 512
--> long short (pause) long short short
This sounds as if the bios refuses the 512mb modules
I guess the beeps mean:
long short - keyboard-slot ram refusal
long short short - bottom-slot ram refusal
but according to the manual it should be possible to install 1 or 2 512mb modules. What am I doing wrong?
Do I need a BIOS update? (currently installed: "ACPI BIOS 1.20")
If only a new BIOS supports 512mb modules - is there a possbility to upgrade the bios from unix?
(the only BIOS download I found on the Toshiba support pages unfortunately just works for windows)
Help would be much appreciated...

Yes, you can upgrade your 3500 up to 1024 mb memory ( 2 x 512 mb ) but only with the right modules
You need *16 x 32 ( 16 chip architecture )* PC133 , 3,3v sdram modules ( 144 pins so-dimm )
I fear that your 512 mb modules are not compatible :-( you can count the chips on the module, there should be 8 chips on both sides of the module

DM 6-y address Book Sync leads to error code 0x80040fb3

DM 6-y address Book Sync leads to error code 0x80040fb3. I have done the following:
rebooted 6000+ tijmes (or mabe a bit less than that)
performed a security wipe on my device
reinstalled DM 6 software several times
Had "I-Yogi" technicians try to fix
Used "cellrepair service"
Bottom line--I'm not a computer guy. I just want my BB9550 Storm to be able to sync with outlook. Calendar, Memo and Tasks sync with no problem. Address books always stops after 121 records are synced and then I get the error code.
Definition of insanity is doing the same thing over and over but expecting different results. I'm now insane and don't know what to do.

That is certainly one option.
If you want to continue, here is a KB for activating advanced logging to see if that provides you with anything useful:
KB01451How to turn on advanced synchronization logging if a wired synchronization fails
I've also heard on these forums that if you export your contact list from Outlook (to CSV, ASCII or something else), the order they come out in is the same order that the synchronization works in...which might better help you identify the offending record (which you could then delete and re-create).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Changing Workflow id in V_T554S_WEB leads to error in WF

Hi Experts, We have specified earlier custom workflow id in table V_T554S_WEB. Later we changed it to standard WF 21500001 for some testing in levae application. And now when we replace the same with custom workflow id it leads to error in WF in SWIA it does not go to next agent. Please advise. Regards, IFF

Hi,
Please check that the necessary parameters are set properly. Below link may be useful for understanding:
Customizing the ESS Leave Approval using Business Workflow - ERP Human Capital Management - SCN Wiki
Regards,

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Lead Creation Error thro ABAP Code

Hi CRM ABAP Experts,
I have written a code for lead creation by referring SDN Code. when i execute code , lead is created and transaction get saved in to system. but atlast one error comes. plz help me. when i pass testrun = 'X' then i am not getting error but lead trasaction is not created. and when i passedtestrun = blank then lead is created but gives below error.Below error i am facing.
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_OS_OBJECT_NOT_FOUND' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_METHODCALL_PPF=============CP' has to be
    terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_OS_OBJECT_NOT_FOUND', was not
     caught in
    procedure "IF_MEDIUM_PPF~EXECUTE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Could not find the referenced object with the OID
    "00000000000000000000000000000000" (instance GUID) and
My Code is as follows
DATA: it_HEADER type standard table of BAPIBUS2000108_HEADER_INS.
DATA: wa_HEADER like line of it_HEADER.
DATA:it_ORGANISATION TYPE STANDARD TABLE OF     BAPIBUS20001_ORGMAN_INS,
     wa_ORGANISATION LIKE LINE OF it_ORGANISATION.
DATA: it_partner type table of BAPIBUS20001_PARTNER_INS.
DATA: wa_partner like line of it_partner.
DATA:HEADERX TYPE STANDARD TABLE OF     BAPIBUS2000108_HEADER_INSX,
     st_headerx TYPE bapibus2000108_header_insx,
     PARTNERX TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INSX,
     st_partnerx TYPE bapibus20001_partner_insx,
     i_orgx TYPE STANDARD TABLE OF BAPIBUS20001_ORGMAN_INSX,
     st_orgx TYPE bapibus20001_orgman_insx,
     i_save TYPE TABLE OF bapibus20001_object_id,
     i_return TYPE TABLE OF bapiret2,
     DATEX TYPE STANDARD TABLE OF BAPIBUS20001_APPOINTMENT_INSX.
DATA:i_itemx TYPE TABLE OF bapibus20001_item_insx,
     i_item TYPE TABLE OF bapibus20001_item,
     st_itemx TYPE bapibus20001_item_insx,
     st_item TYPE bapibus20001_item,
     i_schedulex TYPE TABLE OF bapibus20001_schedlinx,
     i_schedule TYPE TABLE OF bapibus20001_schedlin,
     st_schedulex TYPE bapibus20001_schedlinx,
     st_schedule TYPE bapibus20001_schedlin.
DATA :c_x TYPE char01 VALUE 'X',
      TESTRUN type BAPIFLAG-BAPIFLAG.
data i_input TYPE TABLE OF bapibus20001_input_fields.
data st_input TYPE bapibus20001_input_fields.
DATA:ORG_NO TYPE OBJEKTID,
     PARTNER_NO1 TYPE BU_PARTNER,
     CUST_BP TYPE BU_PARTNER,
     SALE_OFF TYPE CRMT_SALES_ORG_RESP.
DATA:msg TYPE ZRETURN_ERROR.
DATA:w_item TYPE CRMT_ITEM_NO,
     w_handle TYPE CRMT_HANDLE.
CLEAR:st_headerx.
st_headerx-handle = c_x.
st_headerx-process_type = c_x.
st_headerx-DESCR_LANGUAGE = c_x.
st_headerx-POSTING_DATE = c_x.
st_headerx-lead_type = c_x.
st_headerx-importance = c_x.
st_headerx-source = c_x.
APPEND st_headerx TO headerx.
CLEAR wa_header.
wa_HEADER-HANDLE = '0000000001'.
wa_HEADER-PROCESS_TYPE = 'ZCDL'.
wa_HEADER-DESCR_LANGUAGE = 'EN'.
wa_HEADER-POSTING_DATE = '20100603'.
wa_HEADER-IMPORTANCE = '5'.
wa_HEADER-SOURCE = '019'.
wa_HEADER-LEAD_TYPE = '0016'.
APPEND WA_HEADER TO IT_HEADER.
CLEAR:st_input.
st_input-ref_handle = '0000000001'.
st_input-ref_kind = 'A'.
st_input-objectname = 'ORDERADM_H'.
st_input-fieldname = 'PROCESS_TYPE'.
APPEND st_input TO i_input.
CLEAR st_input.
st_input-ref_handle = '0000000001'.
st_input-ref_kind = 'A'.
st_input-objectname = 'LEAD_H'.
st_input-fieldname = 'SOURCE'.
APPEND st_input TO i_input.
st_input-fieldname = 'IMPORTANCE'.
APPEND st_input TO i_input.
st_input-fieldname = 'LEAD_TYPE'.
APPEND st_input TO i_input.
*To fill the Organization X Structure
CLEAR:st_orgx.
st_orgx-ref_handle = c_x.
st_orgx-ref_kind = c_x.
st_orgx-dis_channel = c_x.
st_orgx-sales_org_resp = c_x.
APPEND st_orgx TO i_orgx.
*To fill the Organization Structure
CLEAR:wa_ORGANISATION.
wa_ORGANISATION-ref_handle = '0000000001'.
wa_ORGANISATION-ref_kind = 'A'.
wa_ORGANISATION-dis_channel = '01'.
wa_ORGANISATION-sales_org_resp = 'O 50000041'.
APPEND wa_ORGANISATION TO it_ORGANISATION.
*Fill input fields for Organization data
CLEAR st_input.
st_input-ref_handle = '0000000001'.
st_input-ref_kind = 'A'.
st_input-objectname = 'ORGMAN'.
st_input-fieldname = 'DIS_CHANNEL'.
APPEND st_input TO i_input.
st_input-fieldname = 'SALES_ORG'.
APPEND st_input TO i_input.
*To fill the Partner X Structure
st_partnerx-ref_handle = c_x.
st_partnerx-ref_kind = c_x.
st_partnerx-ref_partner_handle = c_x.
st_partnerx-kind_of_entry = c_x.
st_partnerx-partner_no = c_x.
st_partnerx-partner_fct = c_x.
st_partnerx-no_type = c_x.
st_partnerx-display_type = c_x.
st_partnerx-MAINPARTNER = c_x.
APPEND st_partnerx TO partnerx.
*To fill the Partner Structure
*CLEAR:wa_partner.
*wa_partner-ref_handle = '0000000001'.
*wa_partner-ref_kind = 'A'.
*wa_partner-ref_partner_handle = '0001'.
*wa_partner-kind_of_entry = 'C'.           """""""A
*wa_partner-partner_no = '62563'.
*wa_partner-partner_fct = '00000022'.
*wa_partner-no_type = 'BP'.
*wa_partner-display_type = 'BP'.
*wa_partner-MAINPARTNER = 'X'.
*APPEND wa_partner TO it_partner.
CLEAR:wa_partner.
wa_partner-ref_handle = '0000000001'.
wa_partner-ref_kind = 'A'.
wa_partner-ref_partner_handle = '0001'.
wa_partner-kind_of_entry = 'C'.         """""""A
wa_partner-partner_no = '62564'.
wa_partner-partner_fct = '00000021'.
wa_partner-no_type = 'BP'.
wa_partner-display_type = 'BP'.
wa_partner-MAINPARTNER = 'X'.
APPEND wa_partner TO it_partner.
CLEAR:wa_partner.
wa_partner-ref_handle = '0000000001'.
wa_partner-ref_kind = 'A'.
wa_partner-ref_partner_handle = '0001'.
wa_partner-kind_of_entry = 'C'.    """"""""A
wa_partner-partner_no = '71024'.
wa_partner-partner_fct = 'ZCDLSM'.
wa_partner-no_type = 'BP'.
wa_partner-display_type = 'BP'.
wa_partner-MAINPARTNER = 'X'.
APPEND wa_partner TO it_partner.
*Fill input fields for Partner data
CLEAR st_input.
st_input-ref_handle = '0000000001'.
st_input-ref_kind = 'A'.
st_input-objectname = 'PARTNER'.
*st_input-logical_key = w_logickey_partner.
st_input-fieldname = 'DISPLAY_TYPE'.
APPEND st_input TO i_input.
st_input-fieldname = 'KIND_OF_ENTRY'.
APPEND st_input TO i_input.
st_input-fieldname = 'NO_TYPE'.
APPEND st_input TO i_input.
st_input-fieldname = 'PARTNER_FCT'.
APPEND st_input TO i_input.
st_input-fieldname = 'PARTNER_NO'.
APPEND st_input TO i_input.
st_input-fieldname = 'MAINPARTNER'.
APPEND st_input TO i_input.
*To fill the Item X Structure
st_itemx-handle = c_x.
st_itemx-header_handle = c_x.
st_itemx-ordered_prod = c_x.
st_itemx-number_int = c_x.
st_item-mode = c_x.
APPEND st_itemx TO i_itemx.
*To fill Schedule line X Structure
st_schedulex-item_handle = c_x.
st_schedulex-handle = c_x.
st_schedulex-quantity = c_x.
st_schedulex-logical_key = c_x.
APPEND st_schedulex TO i_schedulex.
CLEAR: w_item, w_handle.
w_item = '0000000010'.
*To fill the Item Structure
w_handle = 1.
st_item-handle = w_handle.
st_item-header_handle = '0000000001'.
st_item-ordered_prod = '400000120' .
st_item-number_int = w_item.
st_item-mode = 'A'.
APPEND st_item TO i_item.
*To fill Schedule line Structure
DATA:qty TYPE CRMT_SCHEDLIN_QUAN VALUE '1'.
st_schedule-item_handle = w_handle.
st_schedule-quantity = qty.
APPEND st_schedule TO i_schedule.
*Fill input fields for Item data
CLEAR st_input.
st_input-ref_handle = w_handle.
st_input-ref_kind = 'B'.
st_input-objectname = 'ORDERADM_I'.
st_input-fieldname = 'MODE'.
APPEND st_input TO i_input.
st_input-fieldname = 'NUMBER_INT'.
APPEND st_input TO i_input.
st_input-fieldname = 'ORDERED_PROD'.
APPEND st_input TO i_input.
Fill input fields for schedule line data
CLEAR st_input.
st_input-ref_handle = w_handle.
st_input-ref_kind = 'B'.
st_input-objectname = 'SCHEDLIN'.
st_input-fieldname = 'LOGICAL_KEY'.
APPEND st_input TO i_input.
st_input-fieldname = 'QUANTITY'.
APPEND st_input TO i_input.
CLEAR testrun.
*Testrun = 'X'.
CALL FUNCTION 'BAPI_LEAD_CREATEMULTI'
EXPORTING
   TESTRUN            = Testrun
TABLES
   HEADERX            = headerx
   PARTNERX           = partnerx
   ORGANISATIONX      = i_orgx
   itemx              = i_itemx
   sched_linx         = i_schedulex
   HEADER             = it_header
   ORGANISATION       = it_ORGANISATION
   PARTNER            = it_partner
   item               = i_item
   SCHED_LIN          = i_schedule
   INPUT_FIELDS       = i_input
   RETURN             = i_return
   SAVED_PROCESS      = i_save .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
   WAIT          = 'x'.
IF SY-SUBRC = 0.
IF sy-subrc = 0.
ENDIF.
ENDIF.

Hi,
Look at the post. No one will be able to understand anything out of this. Kindly Repaste code using markup.
Regards,
Harsh.
Edited by: Harsh Saxena on Aug 28, 2010 11:40 AM

Define Currencies of Leading Ledger Error

Dear Friends,
I need to replicate a ticket, which consists of three currencies AED,USD,GBP. In the Spro-Define Currencies of Leading Ledger, Two currencies of AED and USD are already defined. when i try to enter 3rd local currency, 40 - Hard currency,
I am getting the following error.
You are not permitted to change the currency type
Message no. FC061
Diagnosis
The currency type for an additional local currency cannot be changed for company code , since documents were already posted in this company code.
How to solve this error?
Please advise.
Regards
Sridhar

issue is closed

Filenames with leading '%' cause error.

I've crawled my NTFS source. I search some terms that I know will show up in this source. I get the following error:
'Error when attempting to generate advanced result list: java.lang.IllegalArgumentException: URLDecoder: Illegal hex characters in escape (%) pattern - For input string: " s"'
In this case the filename was actually '% score card 59.pdf'
I have no idea who came up with the naming condition with a leading percent sign, but that is apparently a legal windows file name, and the crawler actually seems to pick it up correctly, it's just bombing out when the user clicks the Search button.

I've seen this before. The previous customer who reported it decided to fix the filenames, so the problem "went away".
If the filename is accepted during crawling, it's definitely a bug if it causes queries to fail. Can you log an SR with support so we can get this logged properly as a bug, then we can try to get a fix for it.
Scarbo: I believe the problem is not just around using the % as part of the query - if the document with the faulty URL (the URL being derived from the filename) is included in the result set then it will cause the failure regardless of the search expression used.

Feature-Site Theme activation leads to error

When I click on the site collection features>Activate(Theme) it is leading to this error. This is happening when I click on site Actions>Create new site and selecting blog under sites and workspaces. Please help me with troubleshooting this.I have done
some research and saw that some DLLs might be missing or some references are not working properly.
Feature '9aafa318-8619-4726-8531-660edf9221ff' could not be installed because the loading of event receiver assembly "DCCTheme, Version=1.0.0.0, Culture=neutral, PublicKeyToken=43bbb856e4d7825b" failed: System.IO.FileNotFoundException: Could not load
file or assembly 'DCCTheme, Version=1.0.0.0, Culture=neutral, PublicKeyToken=43bbb856e4d7825b' or one of its dependencies. The system cannot find the file specified. File name: 'DCCTheme, Version=1.0.0.0, Culture=neutral, PublicKeyToken=43bbb856e4d7825b' at
System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName
assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String
assemblyString) at Microsoft.SharePoint.Administration.SPFeatureDefinition.get_ReceiverObject()
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn
this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Troubleshoot issues with Windows SharePoint Services.

DCCTheme does not appear to be an out-of-the-box feature. Check with the developer(s).
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Exporting pdf leads to errors in Acrobat...

Hi, everyone.
I'm hoping someone here might be able to help me. I posted this same issue in the Mac Acrobat forum last week, but I still have not received an answer, so I'm hoping I'll have better luck here. Maybe this is an issue with the Indesign CS5 file, or the way I'm exporting?
Here's the original post:
I've looked around on the internet for a solution for this, but I'm finding no answers that help.
I keep getting the following errors in Acrobat Pro 9.3 when trying to use the pdf optimizer. It's driving me nuts. I'm trying to compress an Indesign CS5 generated pdf. It contains transparent objects, and all the images are .ai files.
In the Acrobat pdf optimizer:
If I leave the transparency box unchecked I immediately get this error:
An error was encountered while processing images.
If I check Transparency, it shows the little loading bar, as usual, and then when that's done I get this:
An error was encountered while flattening transparent objects.
The most annoying part of this, is that I've been using this same file for months now. Every so often the disclosures on it get updated, and I make the edits in Indesign, export, add form fields, and compress using pdf optimizer. Why all of a sudden is it grumpy? Is this a CS5 issue, because this form may not have been updated since I upgraded to CS5 from CS4?
I've tried swapping out the .ai files with newly saved CS5 versions. I've tried flattening layers pre-export. I cannot remove transparency, so that's not an option. But, as a test I removed all images before export and the pdf compressed fine. Any ideas? There's no broken links or anything in the Indesign file.
Any help or suggestions are appreciated. Thanks.

Yes, I've been saving it with a new name since April of last year. It's a Sales Receipt that has some legal disclosures on it, and they get updated every so often, so I've been using the same file for quite a while now. It was originally created in CS4, or possibly CS3. Every other month or so the bank decides that there's new "stuff" that needs to be added or removed so using current versions is a must. It seems this is the first time I've updated them since upgrading to CS5, so I can't help but think that may have something to do with it.
Thanks for the suggestion, but unfortunately it didn't work. Same error when I use the pdf optimizer.
Just for "fun", I tried exporting an old version of the same form from December, and it worked fine. It has all the same images on it, so it just doesn't make sense. I mean, it's literally the same form at a glance. Though changing the old to new will take hours of looking through the fine print, and details with a fine tooth comb.
Another oddity is that all the other Sales Receipts, for different clients(there's about 8), export and compress with no problems, and those are as old as the problematic one.

Searching by aggregate type field leads to error message in Workbench

I defined a persistent pojo entity that contains an attribute as an aggregate type mapping.
Now I tried to query entities with an instance of that aggregate type as parameter to the query (TL expression query in the workbench).
First argument (query key) is the attribute of the entity (aggregate type), operator is EQUAL and second argument is the parameter which is of same aggregate type.
I thought this would be the natural way to query but the workbench shows an error message:
0251 - The expression (line 1.) on query readByOwner is invalid. When querying on a reference mapping, only unary operators (Is Null, Not Null) are supported.
Is this really an error? Where is the problem?
I found a similiar post from 2003 on this forum, saying that it is a bug, though I'm unsure if it is the same problem. I use the most recent version of Toplink and Workbench, so it's hard to believe that such a basic problem was not fixed for 5 years... was it?
Regards,
Sebastian

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

TS3694 error -39 leads to error -50 when downloading from itunes store and the download will not resume

I download a TV Show from itunes and usually as soon as it begins, it tells me that my TV Show is ready to watch and I can choose to "Play TV Show Now" or "Watch Later." I choose Play TV Show Now. Then after about 20 seconds of watching, and error message comes up with the error code -39. The download stopped and when I resume, it will download for 5 more seconds but then I get another error message with the code -50. I click the Resume button and it won't resume no matter how many times I click it. So I have to go to Music, iTunes, iTunes Media, Downloads, and delete the folder with the name of the TV Show that wouldn't work. Then i open iTunes again and Check for Downloads and it starts over downloading.
The errors only occur when I start playing the TV Show while its downloading. Its fine if I let it download.
How do I fix the errors?

That's not the issue (waiting for the download to complete). The issue is that the download never ever completes. The Computer says "Hey, you can watch your show," but then just a few moments have downloaded, and you get a "-50" error.
The published solution for the -50 error is to navigate to the wack place that itunes has decided to store your download (if you can find it) and delete the partial file and try again.
I have "tried again" 5 times now. It's not working.

Cp leads to "error processing extended attributes: Argument list too long"

With certain PDF files to which I've added a lot of extended attributes (using Skim.app, a PDF reader/annotator which stores its notes in extended attributes), Chronosync and Finder drag-drops don't preserve extended attributes like they're supposed to (i.e. the notes aren't viewable on copies of the document). When I use cp to do they copying, the following message appears in system.log:
error processing extended attributes: Argument list too long
Googling it returns no results

Hi Derick,
error processing extended attributes: Argument list too long
I have no idea why you get this error when copying a file...
There is a max size for each extended attribute (about 3800bytes), and if I try to create (by using a simple C program) an attribute larger than this limit then I get "Argument list too long" error. But in your case you are trying to make a copy of an existing PDF file whose extended attributes should be smaller than the limit, of course (Skim has no magical power of creating an attribute larger than the limit; if the note is too large then I guess Skim just splits the note into two or more attributes).
Q1: do you get the error only if you (try to) copy a PDF file with large notes? or you also get the error for a file with only small notes? How about a PDF file with many small notes?
Q2: are you copying the PDF file to external volumes? If so, are you sure it is HFS+? What happens if you copy the PDF file to the same internal disk volume, for example
cp your.pdf tmp.pdf
PowerMacG4, PowerBookG4, iMac(C2D) Mac OS X (10.4.9)

Currencies of Leading Ledger Error

Dear all,
Can You any one help me the below error.
Regards,
Sathish.E

Hi sathish enuganti
go for oy01 and select ur country fill the field hard currency save
go for ob22 and fill again by keeping blanks for two currency types valuation means legal valuation save and press enter
thanks
ram

Failed Restoration leading to Error 1013

Hi All,
I've exhausted the searching around the internet to help get my phone working again.
Last night, out of the blue, my phone stopped having service (iPhone 4 CDMA Verizon) and said I needed to restore it using iTunes.
When I plugged it in, iTunes said it was not able to restore at this time, try again later.
I tried again for hours afterwards. I was on the phone with Verizon and Apple and both parties weren't really able to help me over the phone.
I did everything that was told to me. Hold Power/Home simultanouesly, trying several different Macs, Macbooks, and PCs, reinstall iTunes, etc..
I then decided to put it into DPU mode which got me somewhere but not a lot. It started downloading the software back onto my phone and what not but then Error 1013 pops up. This also happened on my Macbook Pro, my friend's Macbook Pro, the college PC and two college-owned iMacs; all spat back that error message.
My personal Macbook does not have the gs.apple.com under the hosts file that everybody keeps talking about.
Does anybody have any suggestions as to what is wrong/ how I could possibly try fixing this before I head out to the Apple Store?

http://support.apple.com/kb/TS3694#error1013
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Outbound_hdlr leads to error \x2fwebdynpro\x2fssr\x2fSAPWebFramework.js\x22\x3e\x3c\x2fscript\x3e\x3cscript\x20language\x3d\x22JavaScript\x22\x20type\x3d\x22

Similar Messages

Maybe you are looking for