Outbound IDOC for Article Master in WPMA without Price

Hi,
How to Generate an Outbound IDOC for Article Master in WPMA Tcode without maintaing Price for the Article. Please suggest Is it Possible in IS-Retail. If so, what needs to be Done.
Regards,
Selvakumar. M

Hi Selvan
In patner profile of outbound, Assign WP_PLU01 instead WP_PLU03..
This will solve ur problem
Regards
Vijai Jain

Similar Messages

Generate outbound idoc for Customer Master

Hi Developers,
I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
Thanks in advance for helping.
Regards,
Gajendra

Hi,
If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
If you want to send the idocs automatically, then you will to configure some program.
Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
Transaction SPRO
SAP Customizing Implementation Guide -->
SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
Take a look at this thread.
Re: automatic Idoc outbound
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

Outbound IDOC for customer master

Hi
I want to configure that as soon as I create a customer master using the transaction XD01 it should generate an outbound IDOC. Can anyone tell me how to configure this and what need to be br configured.
Thanx in advance
regards
Vinod

Hi Vinod,
We can distribute master data in many ways like Send original copy, Send changes and third one is Pull master data.
Go to txn SALE, and follow the steps to configure your scenario.
I think in your case you have to use Message Control or
Output Determination.
visit this link for message control...
http://help.sap.com/saphelp_erp2004/helpdata/en/c8/198afa43b111d1896f0000e8322d00/frameset.htm
Regards,
Narinder Hartala

OutBound IDoc for Material master

Hi everyone
I need to send Material Masterdata whenever data is saved in MM01,MM02 using BTE1250 .
I need to use function module MASTERIDOC_CREATE_REQ_MATMAS to send idoc.
Can anyone please help me with a basic program/ code for sending Idoc using MASTERIDOC_CREATE_REQ_MATMAS.
I am new to Idoc and could not understand programs given in SDN.
Thanks in advance.

Hi,
Refer to SAP standard program "RBDSEMAT".
Regards
Vinod

Outbound IDoc for AR Correspondence (Credit/Debit Memo)

We currently use the Print Correspondence function to generate automatic correspondence. In transaction OB78 we have each correspondence type linked to a print program which generates a .pdf "AR Invoice" via SAPScript.
Our new requirement is to generate an Outbound IDoc for the same miscellaneous AR Correspondence output. There does not seem to be any configuration means by which to generate an IDoc for these financial documents. Enhancement RFKORIEX only allows for fax or email.
Please advise how to generate IDoc via configuration without extensive coding.

We currently use the Print Correspondence function to generate automatic correspondence. In transaction OB78 we have each correspondence type linked to a print program which generates a .pdf "AR Invoice" via SAPScript.
Our new requirement is to generate an Outbound IDoc for the same miscellaneous AR Correspondence output. There does not seem to be any configuration means by which to generate an IDoc for these financial documents. Enhancement RFKORIEX only allows for fax or email.
Please advise how to generate IDoc via configuration without extensive coding.

Trying to change Inbound IDOC to Outbound IDOC for testing....

Hi Friends,
I am trying to do the following
1) In our legacy system SAP R/3 3.1H we have received an IDOC from our partner. This has been stored correctly.
2) We now need the same functionality in our SAP R/3 4.6C system so I have created the IDOC type + segments accordingly. I have also set up the partner profiles
3) We need test data but our partner can not send yet so the only other way is to send this INBOUND IDOC from 3.1H to 4.6C.
4) HOWEVER, i have tried everything to do this like using WE19 to edit the idoc, but I can not process it for OUTBOUND processing.... You can in 4.6C but there is no option in 3.1H.
HELP!! Rewards

Hi Friend,
        The test programs allow you to skip certain sections of the processing chain between applications to localize errors. However, they can also be used to simulate an entire business process (for example, purchase order on the customer side with posting of the purchase order on the vendor side) in an SAP System (without any other systems). For this reason, the test programs are an important tool for configuring the IDoc Interface and defining new IDoc types.
Use
You can use the test tool to generate an IDoc manually and send the IDoc for either inbound or outbound processing. You are not restricted to a specific port type. You can start with an IDoc type (an empty IDoc) or use an old IDoc as a template and edit the IDoc, that is, add segments or change data. This is a good way to test new IDoc types, in particular.
You can forward your new IDoc for standard inbound processing (checking partner profiles and so on). You can also call a function module directly. You can therefore test new function modules for new IDoc types.
Activities
·        Start the test tool with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Test Tool (WE19). You can use a template for your test IDoc.
You can choose IDoc types as a template, either directly or according to a specific message type. You can use the F4 Help for IDocs used as a template, which searches for IDocs by selection criteria, in the same way, for example, to IDoc Display. When an IDoc file is used as a template, the IDocs are read from this file and are available to you for selection. A default value for the IDoc file gives you the system using your test port which you can enter in IDoc Administration . This test port must therefore be of the file type. The default file is the inbound file entered there.
·        You generate the IDoc using .
The IDoc is displayed as a tree structure. If you do not use a template to create the IDoc type, at least one more segment must be added.
·        To create segments in the form of tree nodes (colored fields) place the cursor on an existing node (for example a control record at the top) and choose .
You can cut, paste or copy individual segments or entire segment groups by positioning the cursor on the relevant segment and selecting the required action from the Edit menu.
·        Click on the white fields to change data in the segments.
In the case of the control record, only the fields which are relevant for standard inbound processing are displayed. Do not forget the required entries in the partner profiles if you want to send the IDoc for standard inbound processing! You can also change all of the control record data by choosing All fields in the edit screen.
In the All fields editor screen you must enter the non-language specific partner function (for example AG for vendor). This is the only screen in the IDoc Interface in which the partner function is not translated into your language (in English AG becomes vendor VD) - in the partner profiles or in the IDoc display the field is always translated. Thus, you see the partner functions here in the way they are saved in the database. This is a unique value in the SAP System and therefore protected against mistakes.
·        The additional procedure depends on whether you want to test inbound or outbound processing.
Test: Outbound Processing from MC
Use
Use this test program if you have chosen the Message Control module and want to test generation of an outbound IDoc from an existing message status record (table NAST).
Prerequisites
You must be able to post the application documents which are to be converted into IDocs by the Message Control module correctly so that a message status record can be generated. In the case of the Materials Management (MM) and Sales and Distribution (SD) components, the following entries are required:
·        Customer or vendor records
·        Material records
·        Info records
·        MC condition record: The output medium 6 (for EDI) must be entered here. The condition records are maintained as messages from the respective application.
The appropriate file ports and partner profiles must exist in the IDoc Interface.
Outbound processing must be stopped when the message status record has been generated to allow the test program to intervene. To do so, you must set the Message Control dispatch time to 1 (output with selection run) in the corresponding condition record in the application. This test program, therefore, is simply used to start a selection run which retrieves the Message Control records and sends them for further outbound processing. The program is report RSNAST00, which is also generally scheduled with dispatch time 1 in live operation.
Activities
Once the application document has been posted, outbound processing stops after the message status record has been generated and is triggered again by the test program. Choose SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Outbound ® Outbound from MC.
Errors are stored in the Message Control processing log (document header) and in the status records of the IDocs. The status records, however, are only available if the IDoc was successfully generated.
Use
This test program selects one or more outbound IDocs and forwards them to the external system. You can choose the IDocs according to various criteria (for example, recipient or business message).
Prerequisites
You require outbound IDocs which were generated without errors (no error status). The partner profiles, therefore, must be maintained completely.
Outbound processing must stop when the outbound IDocs have been generated to allow the test program to intervene. You can check this by setting the output mode to Collect IDocs in the partner profile for the IDoc Interface. If you now generate an outbound IDoc for the partner (for example, using the application or the test tool), the IDoc is only generated in the SAP System and is not forwarded to the external system. This test program, therefore, is simply used to start a selection run which retrieves your IDoc(s) and sends them to the external system. The program is report RSEOUT00, which is also generally scheduled with the output mode Collect IDocs in live operation.
Activities
You start the test program by choosing SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Outbound ® Outbound from IDoc (WE14).
You can decide whether the output mode is set to Start subsystem or Do not start subsystem in the partner profile. This defines whether the external (sub) system processes the IDocs further.
Use
This program is used to test whether status confirmations for an outbound IDoc are sent correctly from the external system to the SAP System. The port type here must be set to File.
Prerequisites
A correct status file which can be generated by an EDI subsystem, for example, is required. The status file must refer to an existing outbound IDoc in the SAP System. You can also generate such a status file yourself.
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The SAP System reads the status file. The IDoc number contained in the file refers to the outbound IDoc, to which the status confirmation relates. The confirmed statuses are credited to the relevant IDoc in the form of status records in the SAP System.
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Status ® Edit Status File (WE17) and pass the inbound port, name and directory of the file. These entries overwrite the standard values which you have stored in IDoc administration using the test port.
Test: Inbound Processing: Modified Outbound File
Use
This program converts an outbound file with IDocs to a correct inbound file and sends the new file for inbound processing. The outbound file is not modified and can therefore be used more than once. The port type here must be set to File.
Prerequisites
You need a correct outbound file, for example, a file which is generated by the test tool or using a standard outbound processing. In this case, a port of the type File must be specified in the partner profile for the IDoc Interface, so that the IDoc(s) can be written to a file.
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The program imports sender and recipient data as input parameters from the user. The program reads the IDoc file and changes the corresponding entries in the IDoc control record. The changed data is written to a second IDoc file at the operating system level.
Standard inbound processing is then triggered;
·        Reading the modified file
·        Generating the IDoc(s) in the SAP System
·        Processing in the application
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Inbound ® Inb. Mod. Outb. File (WE12).
Set the sender and recipient data, as well as the outbound file and the inbound file to be generated (path and name). Your entries for the inbound file overwrite the standard values which you have stored in IDoc administration.
The recipient in this case is the SAP System. The port is used for identification purposes:
·        SAP (for example RSMITH
Test: Inbound Processing: Original Inbound File
Use
This program reads an inbound file and sends the file for inbound processing. If all data has been successfully read, the file is deleted.
Prerequisites
You require a correct inbound file. In this case, correct means that the:
·        Sender and recipient in the control record are correct
·        Direction in the control record is set to 2 (inbound)
·        Client in the control record and data records are correct or empty
The sender port must be recognized by the receiving system. The port must therefore be maintained as a port of type File in the port definition for the IDoc Interface. The entry for the inbound file must also be given here.
Features
The program reads the IDoc(s) from the inbound file and sends them for standard inbound processing (with processing within the application).
The file is deleted after being read successfully!
Activities
Start the test program with SAP Menu ® Tools ® IDoc Interface/ALE ® Test ® Inbound ® Inb. Orig. Inb.File (WE16) and pass the following data:
·        Inbound port
·        Name and directory of the file
These entries overwrite the standard values, which you have stored in IDoc Administration using the test port.
Thanks

Data Migration for Article Master

Hi,
I am doing LSMW For Aritcle master.In Aricle master having some custom fields also .that also i need to upload.
Can you tell me performance wise Which way of method is good for article master.Pls Explain me.
1)Batch Input
2)Recording
3)BAPI
4)IDocs
Regards,
GJ

Use IDOC or BAPI
Regards
Vinod

Is it possible to generate outbound idocs for FI invoices? How?

Is it possible to generate Outbound idocs for FI invoices? How? or else i have to write program to get data in file and pass it to translator. Please help.

Dear Gabriel
Before letting you know the possibility, can you please let me know why you want such a requirement, since standard has not provided such copy control, to my knowledge.
As you would know order type KB is for consignment fillup where you are just transferring the goods from FG unrestricted to your own warehouse and that is why in standard you can see the copy control KB --> F8 which means you can raise proforma against delivery and not against fillup order.
So think of whether really you wanted to raise proforma against fillup order which is NOT recommended by SAP. However, still if you feel that the requirement is so to have, you can make the settings in VTFA.
thanks
G. Lakshmipathi

Function Module to Generate Outbound IDOC for Sales Documents

Hello Experts,
Can someone please help me, I need to know which function module to use in order to generate the outbound IDOC for sales documents. Some of the fm's I have come across are the following:
IDOC_OUTPUT_ORDERS, but actually for Purchase Orders
IDOC_OUTPUT_ORDRSP, but did not generate any IDocs for my sample Sales Order.
Points will be given for any help provided.
Thanks in advance.

Hi Nagaraj,
I tried using the IDOC_OUTPUT_ORDERS but I keep getting an error that the Purchase Order <xxx> does not exist, even though the document I tried is a sales order. For everyone's reference here is the code:
form process_data.
DATA v_idoc       TYPE edidc-docnum.
DATA i_edidd      TYPE TABLE OF edidd.
DATA wa_idoc_ctrl TYPE edidc.
LOOP AT i_nast INTO wa_nast.
    CLEAR i_msgs[].
    CALL FUNCTION 'WFMC_PROTOCOL_GET'
      EXPORTING
        cps_nast        = wa_nast
      tables
        messages        = i_msgs
     EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2.
    LOOP AT i_msgs INTO wa_msgs WHERE arbgb EQ 'E0'.
*--- Check first if there is an IDOC
      IF wa_msgs-msgv1 IS INITIAL.
        CONTINUE.
      ENDIF.
      v_idoc = wa_msgs-msgv1.
      CLEAR i_edidd[].
      CLEAR wa_idoc_ctrl.
      CALL FUNCTION 'IDOC_READ_COMPLETELY'
        EXPORTING
          document_number                = v_idoc
        IMPORTING
          IDOC_CONTROL                   = wa_idoc_ctrl
*         NUMBER_OF_DATA_RECORDS         =
*         NUMBER_OF_STATUS_RECORDS       =
        TABLES
*         INT_EDIDS                      =
          INT_EDIDD                      = i_edidd
        EXCEPTIONS
*         DOCUMENT_NOT_EXIST             = 1
*         DOCUMENT_NUMBER_INVALID        = 2
          OTHERS                         = 3.
      CALL FUNCTION 'IDOC_OUTPUT_ORDERS'
        EXPORTING
          object                              = wa_nast
          control_record_in                   = wa_idoc_ctrl
*       IMPORTING
*         OBJECT_TYPE                         =
*         CONTROL_RECORD_OUT                  =
        tables
          int_edidd                           = i_edidd
*       EXCEPTIONS
*         ERROR_MESSAGE_RECEIVED              = 1
*         DATA_NOT_RELEVANT_FOR_SENDING       = 2
*         OTHERS                              = 3
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      COMMIT WORK.
    ENDLOOP.
ENDLOOP.

IDOC for Batch Master Conversion

Hi,
Is there any IDOC for Batch Master Conversion (Transaction : MSC2N) ?
The data being maintained is in Basic data 1 and classification tabs.
Regards,
Esha Raj

Hello,
I faced the problem with BATMAS03. When drilling down to F'tn BAPI_BATCH_SAVE_REPLICA I could that one and similar BATMAS03 get to work with filling following set of fields. Adapt of course the values to you're system.
BAPIBATCH_SAVE_REPLICA_
MATERIAL = 000000000000033001
BATCH = 12543872
PLANT = D010
CLASSALLOCATIONS
CLASS_TYPE 023
OBJECTKEY 00000000000003300112543872 (in our case MATNR&BATCH combination, dependend on system setting Plant could also be needed)
CLASSNUM FROZEN_FINISHED (Classification Class)
OBJECTTABLE MCH1
CLASSVALUATIONSCHAR
CLASS_TYPE 023
OBJECTKEY 00000000000003300112543872
OBJECTTABLE MCH1
CHARACT LOBM_ZUSTD
VALUE_CHAR X
This works now fine and similar for the BATMAS IDOC
Hope this is helpfull for you.
Dirk

I want IDOC for Vendor master updation ( XK01 &XK02 )

Hi
I want to do LSMW in IDOC method for this vendor updation.
So I want IDOC for Vendor master updation ( XK01 & XK02 ).
I want to do both create vendor and change also.
Regards,
Ravi
Edited by: kandukuri ravi on Dec 1, 2008 2:56 PM

Hi,
For Vendor Master using IDoc's for LSMW,Use Message Type = CREMAS and Basic Type = CREMAS05.
For Basic type 01,02,03...05 are versions which includes more fields in basic type so better use latest version.
Hope it will help you.
Regards,
Sudhakar Reddy.A

Default data for article master -Purchasing/Logistics view

Hello,
What is the difference between below configuration settings:
1. Logistics general --> Basic data retail --> General control, retail master data --> tab Control parameters for article master --> field 'vendor default data'
2. Logistics general --> Business Partner --> Vendor --> controls --> Define account groups --> go to details --> tab default values
Are these settings intended for same purpose ( e.g. copy default data from vendor master to article master) ?
Thanks,
Pat.

Found the answer
Copying of Data from the Vendor Master to Purchasing Data
All changes that you make to the reference data in the vendor master record are copied to the purchasing data in the article master record if the system is configured accordingly in Customizing for Business Partners in Define Account Groups and Field Selection for Vendors.
Copying of Data from the Vendor Master to Logistics Data
The changes are also copied to the site-specific logistics data if the vendor is either the sole vendor or the regular vendor and if the system is configured accordingly in Customizing for Logistics Basic Data: Retail in General Control, Retail Master Data. For more information, see Vendors: Copying Changes to Other Data Records.

If output type is missing in PO, can system create a Outbound IDOC for that

Hi
Scenario: sales order should get generated in anoter system once PO is saved in first system. But this is not happening for a new vendor. I checked & found that output type is missing in PO. Asked user to provide another PO for which SO was created. I checked that PO, here also output type is missing.
I am surprised that if output type is missing in PO, can system create a Outbound IDOC for that PO? If yes then I am not aware of this process.
Please help me in analyzing this problem.
Regards
Sapmm12

Hi Sridhar,
Thanks for your replay.
I checked for other vendor also. condition records does not exist in NACE for any of them. But user is claiming that sales aorder is getting created for those PO. Though I have asked them to provide the sales order number & possibly outbound IDOC number for at least one vendor.
I tried to search IDOC number with reference to PO number but system is taking too much time & ending with run ime error. Because I do not have details of partner, receiver not even message type. Neither I have any process document which can explain how this process works?
any other approach which may work here?
Regards
sapmm12

Outbound IDOC for CLFMAS

Hi All,
I am sending Outbound IDOc for CLFMAS through BD93 T-code. But it is sending all the IDOCS for Classification created earlier against vendor.
I want to send only selected one.
Please let me know how it can be achieved.
Thanks,
Anuj

HI Sharath,
WE are passing Class Type, Class and Date only as these are the only options availabe there.
We want to post those IDOCs only whose Vendors were created recently. But insted it is picking all the vendors which are linked to the CLAss type and Class name passed on selection screen.
So, please let me know how this transaction fulfills my requirement. or is there any other way to achieve this.
Thanks.

Outbound idoc for RFQ

Hi,
can you tell me Outbound idoc for RFQ, Inbound idoc for Quotation and PO

P786809 wrote:>
> Hi,
> can you tell me Outbound idoc for RFQ, Inbound idoc for Quotation and PO
Hi,
This is the idoc type..
ORD_ID01 - Req.for quot./quotation/purchaseorder/order change
Message Type for               IDOCTYP
QUOTES -ORD_ID01
REQOTE -ORD_ID01
REQOTE is the outbound idoc will trigger for RFQ
QUOTES and REQOTE will trigger for Inbound idoc for RFQ
ORDCHG,ORDERS,ORDRSP,PORDCR will trigger for PO inbound and Outbound idoc
Regards,
Prabhudas

Outbound IDOC for Article Master in WPMA without Price

Similar Messages

Maybe you are looking for