Outbound IDOC not received at the receiver system.

Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohith

Hi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes.

Similar Messages

Idoc not found in the receiving system

Hi Experts,
In the sending system idoc status is 03 (Data passed to port OK), but in the receiving system the idoc is not there. How to rectify this error?
Thanks & Regards,
Soumya.

Hi Soumya,
Check the RFC connections, becoz in the sending system once the IDOC is sent the status becomes 03 it does not check whether the IDOC has sent to the received system, if there are any errors before sending the IDOC it will not send and the status will be 01, so check the RFC connections at sending and receiving systems.......
Reward points if this helps............
Regards,
Ravi G

Mail not received by the receiver but successfully sent out

hello sir
i m new to java mail and i have installed one free server from in internet ........i have connected to that server through my programme ..........
i have send mail through my programme .....
from : [email protected]
to : [email protected]
it send it out successfully and showing in the server but it will not been received by the receiver..................can u plz tell me why and what i should do to come out of with this problem so that it will be delivered to the receiver...
thank you
gaurav

I sent like 6 msgs today and all day could not get one freaken message delivered. I have now permenetly turned off iMessage. The service in my opinon is horrible, not reliable and annoying. This is not the first time I couldnt get messages through.
In general iOS5 has caused me more problems then solutions.

I re-send a mail with 3 pdf attachmets to an outlook account and the attachments do not arrive to the receiver, if the receiver is a Windows PC. If the receiver is an iPhone the attachments can be accessed til the moment Unload the full message is pushed

I re-send a mail with 3 pdf attachmets to an outlook account and the attachments do not arrive to the receiver, if the receiver is a Windows PC. If the receiver is an iPhone the attachments can be accessed til the moment Unload the full message is pushed

It is NOT legitimate. It is SPAM
The latest Firefox release is 7.0.1 which you should update to by visiting http://www.mozilla.org/en-US/firefox/new/

My sms are not memorized from the receiver

hi,
i have a Nokia 1200. From few a have this problem:
the sms the sms that i send are not memorized from the receiver . It is only possible read it when arrive and cancel it.I've tried to move the sim card to another phone and i have not problem.
Anyone have had the same problem?
hi
Alfredo

Puh! I think you need to rephrase that since it is impossible to understand what you could have meant...probably that´s why nobody has replied yet...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

My iphone has (-1) message and it will not show my message as sent even it has already received by the receiver. help!thx

I have updated my iphone to ISO5 yesterday, and suddenly after 1day, the message app show that I have got (-1) message, and everytime when I am trying to send a message, it will always show as sending but never get sent even if the message has already been received by the receiver.
Also my message inbox got emptied as well.
It will be great if anyone of you could kindly help me out!
thanks a lot!

Hi there miamidlfin,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

TS3798 Directv apt will not connect to my receiver. The receiver is connected to the internet. Any suggestions Thanks Dick

Directv Apt will not connect to the receiver. The receiver is connected to the internet. All other functions work fine

have you went to the DirectV support site? They sem to have a lot of information there for mobile productes.

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted.

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.

Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.

When using facetime, my picture is not seen on the receiving end. How do i fix?

When using FaceTime, my picture is not seen on the receiving end. Help!

Part of training the junk filter is also to mark good messages 'As Not Junk'.
http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

Inbound IDoc not getting generated in XI System

Hi all,
I have created a scenario following the given weblog:
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
The first half of this scenario is working fine and the idoc data is getting posted into the the oracle table successfully.
The business process is successfully sending the acknowledgement IDOC 'ALEAUD' to the XI server using an HTTP Receiver Channel.
The problem is that no inbound IDOC can be seen in the XI system using tcode we05.
Next the xi system has to send the same IDoc to the R/3 system. But as no IDoc is getting generated in XI, nothing gets sent to R/3.
Can anyone suggest what could be the possible error.
Pls help.
Regards,
Neetu

Hi,
You will not see that IDOC in WE05 of the XI system. You can see that only in SXMB_MONI. XI system will not store any IDOC. When it enters XI it is a XML message and it will not post any IDOC that you can see in WE05.
If you need to send the IDOC back to R/3 system, you can use BPM and send back the IDOC to R/3. If you need few details from Oracle tables that is to be sent back to R/3 then get those values from Oracle tables and fill in the same IDOC and send it back to R/3.
Try this and let me know.
Thanks,
Prakash

DataSource 2LIS_11_VAHDR is not defined in the source system

I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any success

I am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3.

Duplicate Outbound IDocs getting Triggered at the same time.

Hi Folks,
I have created custom outbound idoc and done all the configurations required like WE20, WE30, WE31, WE81, WE82, WE 41, WE57 etc.
Also I have written my code to populate segments and then call MASTER_IDOC_DISTRIBUTE in the custom function module which is assigned to the process code and also done the configurations like we57 etc. for the same.
Now when I trigger my output type from VL74 transaction, I noticed two entries in we02 resulting in two IDocs generated for 1 HU.
The difference in two IDocs is the first IDoc getting generated in error with status 29. While the second one as success with status 03.
The data records containing segments have same values for both the IDocs number.
Whether the configuration is a issue here or problem in code of custom fm?
Please help.

Hi Anil,
Appreciate your quick response.
In my custom FM I have populated an internal table it_master_idoc_data with two records of two segments, containing segment name in SEGNAM filed and segment data in SDATA field.
Please let me know whether the data in this internal table of structure EDIDD sufficient for passing to MASTER_IDOC_DISTRIBUTE FM? Or do I need to populate any other field of EDIDD.
Also I am exporting a structure master_idoc_control containing values in this 5 fields.
MESTYP = Z message type, Z IDOCTP, partner and details in RCVPOR, RCVPRN, RCVPRT fields.
I am not populating the internal table communication_idoc_control while calling FM MASTER_IDOC_DISTRIBUTE from my custom function module.
After executing MASTER_IDOC_DISTRIBUTE FM, when the control comes back to my custom FM there is one record in communication_idoc_control internal table with IDoc number in DOCNUM field with status 29(error). Now when we check in WE02 there are two IDocs generated after this transaction's execution.
The first one in error which FM MASTER_IDOC_DISTRIBUTE returns and second one in success with status 03.
Please help....
Thanks,
Pravesh

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

Outbound IDOC not received at the receiver system.

Similar Messages

Maybe you are looking for