Outbound mails fails with error message number 826,Cannot process message,

Hi
We are in process of configuring outbound mail.
Profile parmeteres adapted are icm/server_port_0= PROT=SMTP,PORT=0,
is/SMTP/virt_host_0=:;and followed the notes 421359 for ICM Parameters
when we give the SMTP port number as 25,SMTP serveice in SMIC is not working and when we changed to 0 SMTP service is working.
Now the issue coming is we are not able to send the Mails to any domains and the error message in SOST is
*message number 826,Cannot process message, no route from XXXXX to XXXXX.com.*
Please suggest on how to over come the issue,are we missing any parameters or any other configurations.
All your help is highly Appreciated.
Regards
Swetha

HI
Did you check in SCOT?
SCOT>SMTP->Internet
SCOT>Settings-->Default Domain.
Please also check if you can telnet the SMTP server.
Anindya
Edited by: Anindya Bose on Mar 3, 2010 5:13 PM

Similar Messages

  • Flash CS 6 error: CreateWinProcess failed with error 2 - The system cannot find the file specified

    Hi,
    I'm getting the error "CreateWinProcess failed with error 2 - The system cannot find the file specified" whenever I try to test an Air app within the Flash IDE.
    This error even comes up with a new and empty project .fla file. I already updated the Air runtime and Flash to the latest version.
    How to fix this problem? Any ideas welcome!
    Thank you.

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • Adapter PLAINHTTP cannot process message packages

    Hi,
    I'm receiving 10 lines in one message from ERP and then PI splits them to individual messages. When PI tries to send messages using plain HTTP, I got error saying "Adapter PLAINHTTP cannot process message packages".
    Message packaging is not on and SXI_MONITOR shows messages in separate payloads.
    br,
    Tapio

    This is my assumption.
    Multiple messages that result from mapping are sent as one bulk message (grouped together) in the Integration engine. The  messages are really split into  individual mesges only in the adapter engine. Since HTTP adapter live in Integration Engine and you use HTTP as receiver, you get this error.
    Refer the conclusion portion of the link for further explanation.
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

    Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”.   - trying to remove account but get this message please help

    Try to remove the account in the Internet Accounts preference pane.

  • Ifconfig pcelx0 plumb fails with Bad file number error

    Hi,
    I installed solaris 8 (x86) on a Toshiba Tecra 8000.
    The Tecra uses Neomagic NM2200 chipset for it's display.
    Even though it is not supported by the Sun Drivers, getting xfree86 for sun fixed the display problem for me.
    Now according to the various sources that guided me in this task seemed to point at a few things that I had to do in order to make the Tecra work okay with Solaris 8 :
    1)Change the PCMCIA mode in the BIOS from automatic to PCIC mode
    2)Make sure that there were no IRQ conflicts on the system.
    3)Install the OS.
    Once the OS was installed, I ran prtconf -D and saw that the network instance #0 pcelx0 was showing up under pcic.
    I did not have to install the xig init-pcic patch.
    But it did not create an entry in /devices or /dev (as a link) with the error
    "pcelx0 requested IRQ failed 6".
    Also, I suppose that is the reason why when pcelx0 is plumbed, it comes out with the error message:
    ifconfig pcelx0 plumb : "bad file number"
    Any help will be greatly appreciated.
    Thanks,
    Dwai.

    Thanks Alex,
    I found out -
    ifconfig adapter plumb will fail with Bad File number error when the device file that is being referred to is missing.
    I checked and found that the pcelx link is not being made in the /dev directory and the file not created in /devices.
    I also found that when /reconfigure is run, it tries to create the device for pcelx but fails with this eror message:
    pcelx : RequestIRQ fail 6
    I am assuming that there is some IRQ conflict with some other device.
    Thanks,
    Dwai.

  • REP-56071: Security check failed with error message: Error code30009 - Gene

    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    Hello,
    I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
    one more thing...
    We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
    Tx,
    Diego.

    I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
    The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
    Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
    Regards.

  • Putting a row into a pageable cache failed with error 9 and error message

    Hi Guys,
                 I am fetting the follwoing message when the job is scheduled.
    Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
    I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
    Thanks

    Hi
    I've had the same problem.  We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
    Anyone??
    Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
    Richard

  • I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    Acrobat X problem updating.
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
    ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
    MSI Error message: Ugyldigt drev: K:\
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Is there anybody who know  how to solve it?

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • REP-56071:Security check failed with error message:No privilege to do oper

    Hi
    I get the following error when I try to see the job status (..../rwservlet/showjobs?)
    REP-56071: Security check failed with error message: No privilege to do the operation
    I also get the following error on running any report on this server:
    REP-110: Unable to open file 'Test.rdf'.
    REP-1070: Error while opening or saving a document.
    REP-0110: Unable to open file 'Test.rdf'.
    Anyone seen the same issue before?

    Fugured it out - had issues with reportserver.conf file.
    _*                                                                                                                                                                                                   

  • Installing OS4 - restore fails with error message 1014 - 3GS unusable

    I tried to install OS4 on my 3GS iPhone. Process reported that a restore and update were required. The restore failed with error message 1014. This has rendered the phone unusable. Any help for me since Apple technicians from India weren't able to help.

    Anyone got this fixed, I also have the same problem. I got an error during update, then the iPhone went into Recovery Mode and iTunes says it has to be restored and updated, but the restore has taken over 15 hours know and Applecare told me to wait or come to an applestore... I'm on holiday in Europe and I have a 12 hour fligth in a few days back to the US...

  • REP-56071: Security check failed with error message

    Hi!
    We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
    Oracle9i Reports version is: 9.0.2.2.0
    iAS and Infrastructure are on separate hosts.
    Trying to run Reports demo test.jsp or test.rdf we get the following message:
    javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
    In package:wwv_rw_usr function:security_check
    Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
    Found on Metalink the following Note: 216847.1
    This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
    After commenting them out reports works fine.
    BUT
    at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
    We need reports integration with Portal. We need SSO as well.
    Could you give any workaround for this problem?
    PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
    None of them gave any solution for the problem
    Thanks in advance,
    Andras Weintrauth

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

  • _Media creation failed with error message: 'The system cannot find the path specified.'

    SCCM 2012 R2 CU2 all latest patches.
    I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
    I only see the error in CreateTSMedia.log as below. How do you fix this?
    <![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
    <![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
    <![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
    <![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
    <![LOG[  Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
    <![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
    <![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
    <![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
    <![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
    <![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
    <![LOG[Media creation process that was started from Admin Console completed.
    ]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
    <![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

    Hi,
    Error code 0x80070003 = "The system cannot find the path specified."
    Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Time Machine copy failed with error:28

    Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
    This time, it keeps returning.   I have no idea what to do:
    Here's a log:
    2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
    2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
    2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
    2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
    2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
    2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
    2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
    2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
    2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
    2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
    2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
    2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
    2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
    2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
    2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
    2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
    2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
    2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
    2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
    2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
    2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
    2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
    2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
    2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
    2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper:  message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
        "query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
        "restricted" => <bool: 0x7fff74932320>: true
    2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper:  message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
        "query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
        "restricted" => <bool: 0x7fff74932320>: true
    2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
    2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
    2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
    2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
    2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
    2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
    2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
    2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
        com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
        com.google.Keystone.Daemon.Administration: 0 connection(s)
    2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
    2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
    2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
        <KSTicket:0x585250
            productID=com.google.Keystone
            version=1.1.0.3659
            xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-26 00:04:18
        >
    Using server: <KSOmahaServer:0x292b10
        engine=<KSDaemonUpdateEngine:0x287110>
        params={
            EngineVersion = "1.1.0.3659";
            ActivesInfo = {
                "com.Google.GoogleEarthPlus.intel" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                "com.google.Chrome" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                    LastActiveDate = 2012-11-25 19:27:11 +0000;
                    LastActivePingDate = 2012-11-26 08:00:15 +0000;
                "com.google.Keystone" = {
                    LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                    LastActivePingDate = 2013-02-16 08:00:39 +0000;
                    LastActiveDate = 2013-02-16 22:57:18 +0000;
                "com.google.musicmanager" = {
                    LastActivePingDate = 2012-07-29 06:59:48 +0000;
                    LastActiveDate = 2012-07-28 19:04:42 +0000;
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            UserInitiated = 0;
            IsSystem = 1;
            OmahaOSVersion = "10.8.2_i486";
            Identity = KeystoneDaemon;
            AllowedSubdomains = (
                ".omaha.sandbox.google.com",
                ".tools.google.com",
                ".www.google.com",
                ".corp.google.com"
    >
    2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
        server=<KSOmahaServer:0x292b10>
        url="https://tools.google.com/service/update2"
        runningFetchers=0
        tickets=1
        activeTickets=0
        rollCallTickets=0
        body=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
                <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                    <o:updatecheck></o:updatecheck>
                </o:app>
            </o:gupdate>
    >
    2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
        server=<KSOmahaServer:0x292b10>
        url="https://tools.google.com/service/update2"
        status=200
        tickets=1
        activeTickets=0
        rollCallTickets=0
        data=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                <daystart elapsed_seconds="53810"></daystart>
                <app appid="com.google.Keystone" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
            </gupdate>
    >
    2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
    2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
    2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
        <KSTicket:0x28ec80
            productID=com.google.Chrome
            version=24.0.1312.57
            xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-18 13:11:31
            tagPath=/Applications/Google Chrome.app/Contents/Info.plist
            tagKey=KSChannelID
            brandPath=/Library/Google/Google Chrome Brand.plist
            brandKey=KSBrandID
            versionPath=/Applications/Google Chrome.app/Contents/Info.plist
            versionKey=KSVersion
        >,
        <KSTicket:0x29fe80
            productID=com.google.Keystone
            version=1.1.0.3659
            xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
            serverType=Omaha
            url=https://tools.google.com/service/update2
            creationDate=2010-06-26 00:04:18
        >
    Using server: <KSOmahaServer:0x595c80
        engine=<KSDaemonUpdateEngine:0x287110>
        params={
            EngineVersion = "1.1.0.3659";
            ActivesInfo = {
                "com.Google.GoogleEarthPlus.intel" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                "com.google.Chrome" = {
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                    LastActiveDate = 2012-11-25 19:27:11 +0000;
                    LastActivePingDate = 2012-11-26 08:00:15 +0000;
                "com.google.Keystone" = {
                    LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                    LastActivePingDate = 2013-02-16 08:00:39 +0000;
                    LastActiveDate = 2013-02-16 22:57:18 +0000;
                "com.google.musicmanager" = {
                    LastActivePingDate = 2012-07-29 06:59:48 +0000;
                    LastActiveDate = 2012-07-28 19:04:42 +0000;
                    LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            UserInitiated = 0;
            IsSystem = 1;
            OmahaOSVersion = "10.8.2_i486";
            Identity = KeystoneDaemon;
            AllowedSubdomains = (
                ".omaha.sandbox.google.com",
                ".tools.google.com",
                ".www.google.com",
                ".corp.google.com"
    >
    2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
        server=<KSOmahaServer:0x595c80>
        url="https://tools.google.com/service/update2"
        runningFetchers=0
        tickets=2
        activeTickets=0
        rollCallTickets=0
        body=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
                <o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
                    <o:updatecheck></o:updatecheck>
                </o:app>
                <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                    <o:updatecheck></o:updatecheck>
                </o:app>
            </o:gupdate>
    >
    2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
        server=<KSOmahaServer:0x595c80>
        url="https://tools.google.com/service/update2"
        status=200
        tickets=2
        activeTickets=0
        rollCallTickets=0
        data=
            <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
            <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                <daystart elapsed_seconds="53812"></daystart>
                <app appid="com.google.Chrome" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
                <app appid="com.google.Keystone" status="ok">
                    <updatecheck status="noupdate"></updatecheck>
                </app>
            </gupdate>
    >
    2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
        com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
        com.google.Keystone.Daemon.Administration: 0 connection(s)
    2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
    2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
    2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
    2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
    2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
    2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
    2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
    2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
    2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
    2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
    2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
    2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
    2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
    2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
    2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
    2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
    2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
    2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
    2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
    2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
    2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
    2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
    2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
    2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
    2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
    2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
    2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
    2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
    2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
    2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
    2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
    2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
    2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
    2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
    2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
    2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
    2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
    2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
    2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
    2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
    2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
    2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
    2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28

    >>> Enter Time Machine and manually delete unnecessary backups to make
    >>> sufficient room for new ones.
    >>
    >>
    >> I haven't figured out how to do this.   Where is this setting?
    >
    > I have not figured this out either. But there is a command line
    > program tmutil (time machine utility) that can delete backups, and
    > also do much more. I am not an expert in this area, so I can only
    > suggest that you open a Terminal.app and type
    >     man tmutil
    >
    > Be careful Howard. If Time Machine is not able to delete old backup
    > jobs, something is wrong with your backup disk.
    If I recall correctly you do this by going on to TM and using one of the
    pull down menus in the top apple menu strip ....
    I myself am having problems with TM. I erased the external target disk and
    started TM again. However it stops wverytime and refuses to backup ..
    Telling me there isn't enough room even though the ext space is much
    bigger. It also quotes the size of my HD content about 20% bigger than
    finder says weird.
    Howard (another one...)
    ============
    1. Enter the time Machine
    2. Scroll back it time for a few generations
    3. Select the folder(s) to delete
    4. Under the "Action" item (or gear icon), select the delete option you
    want.
    =================
    > The last couple of days my Time Machine has run out of space during
    > backups (error 28).
    Just to be certain, is that really "28" or is it "-28"? (I assume it is
    a positive error number, as error -28 is
    > In the past, when I've seen this, I just say OK, and the problem goes away
    > by itself, as it clears up space.
    >
    > My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
    >
    > I tried using Disk Utility to fix permissions, but those buttons were
    > greyed out.   Disk Utility did not find any problem with the disk.
    Repair Permissions is not relevant for Time Machine backups. It only
    repairs permissions on files installed by the OS X Installer application
    (or the OS installation or preinstalled OS, or Software Update). TM
    backups don't qualify.
    In any case, Time Machine deletes old backups using root privileges so
    it doesn't care about permissions on the backup drive.
    > Time Machie preferences show 13.3 GB of 1 TB available.
    >
    > I haven't been adding stuff to my computer lately more than getting
    > mail.
    >
    > Oldest backup:  December 29, 2012
    > Latest backup: February 15, 2013
    >
    > Excluded from backups is the backup drive, my downloads folder, and my
    > Mobile Documents folder.
    >
    > Estimated size of full backup 397.5 GB
    Something odd is happening here. Given your described usage, you should
    not be chewing through 1 TB of backups in less than three months. I've
    gone more than a year on a drive with a similar ratio and not filled it
    (and I am backing up my downloads, sometimes two or three times as I
    move them to other folders).
    Has anything major been done to the computer within that timeframe, e.g.
    installing a new hard drive, or erasing the main drive and restoring
    from backup? If so, that drive is treated as a new one and would require
    another full backup, leaving the old one there.
    A similar possibility is if Time Machine thought the computer had been
    replaced, which would result in a new backup being started, and would
    also leave the old backup unable to be deleted automatically.
    In this case, you wouldn't be able to directly access the backups prior
    to the change using "Enter Time Machine", but could get to them by
    holding down the Option key and choosing "Browse Other Backup Disks"
    from the Time Machine menu.
    > What suggestions do you have for me to resolve this issue.
    Which OS X version are you running?
    Have a look in system.log (using Console) to see if Time Machine logged
    any relevant information when the backup failed. Look for references to
    "backupd" (which is the background software which does Time Machine
    backups).
    =============

  • SSIS custom execute sql task : Failed with error

    I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
    Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
    during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
    Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
    "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
    not being created.".
    ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
    Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
    the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
    Task failed: CustomSSISTask
    Here is the code sample I'm trying , 
            public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
                                                  IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
                MessageBox.Show("testing:");
                try
                    // Add the SQL Task
                    Package package = new Package();
                    package.Executables.Add("STOCK:SQLTask");
                    Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
                     // Get the task host wrapper
                    TaskHost taskHost = package.Executables[0] as TaskHost;
                    // Get the task object
                    ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
                    // Set core properties
                    task.Connection = connections[0].Name;
                    task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
                    //task.SqlStatementSource =
                    //    "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID  = '1'";
                    task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
                    // Add result set binding, map the id column to variable
                    IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
                    //IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
                    resultBinding.ResultName = "variable";
                    resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
                    task.Execute(connections, variableDispenser, componentEvents, log, transaction);
                catch (Exception ex)
                    throw new ArgumentException(ex.Message);
                return DTSExecResult.Success;
    It doesnt throw any exception but custom task fails.
    Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
    Any help would be greatly appreciated.
    Thanks
    Sang

    Hi, could you check whether the following threads help:
    http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
    Regards, Leo

  • [ForumFAQ]How to troubleshoot error "SSPI handshake failed with error code 0x80090324"

    Understanding the problem:
    When connect to SQL Server with Windows authentication, you may receive the following message in the SQL Server error log:
    SSPI handshake failed with error code 0x80090324, state 14 while establishing a connection with integrated security; the connection has been closed.
    Security Support Provider Interface (SSPI) is a set of Windows APIs that allows for delegation and mutual authentication over any generic data transport layer, such as TCP/IP sockets. SQL Server supports Kerberos indirectly through the Windows Security Support
    Provider Interface (SSPI) when SQL Server is using Windows Authentication.
    "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos Authentication. There are many reason for SSPI Handshake error to appear in SQL Server error log.
    Troubleshot the problem:
    Download and install the Windows error code lookup tool Err.exe to view error descriptions for Windows Error Codes.
    The error code 0x80090324 (SEC_E_TIME_SKEW) means "clock on client and server machines are skewed". In most case, this is a Kerberos issue. Kerberos is using a timestamp to protect against replay attacks. The maximum time skew that can be tolerated
    between a ticket's timestamp and the current time at the KDC is 5 minutes by default.
    Also check the Windows Event Log of client machine, domain controller and the SQL Server machine for existence of W32time error messages.
    The solution:
    Make sure the clock of client server, domain controller and the server running SQL Server are within five minutes of each other. Or Resynchronize the clock by run w32tm /resync on client machine and SQL Server machine.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    This error can happen due to Active Directory configuration issue or Network related issues. Assuming they are fine,
    another reason could be related to fail Kerberos Authentication to connect to SQL Server.
    In Windows 2003 and above, the default method of establishing a connection is Kerberos but if it fails, then connection may be established using NTLM. An error may be registered on SQL Server error log due to Kerberos failure.
    To confirm if you have any database connection using Kerberos authentication, run this on your SQL Server
    SELECT distinct auth_scheme FROM sys.dm_exec_connections
    If you only see NTLM and SQL then, there is no Kerberos connection.
    To use Kerberos, the client and SQL Server must be in the same domain or trusted domains and a Service Principal Name (SPN) must be registered with Active Directory for SQL Server service account.
    You can check if the service account already has SPN, by running this on the SQL Server
    setspn -l <domain\sqlserviceaccount>
    If you don't see anything starting with MSSQLSvc\ then the account is not setup with SPN.
    You can manually register SPN as a Domain Administrator using these commands.
    To      create an SPN for the NetBIOS name of the SQL Server use the following      command:
    setspn –A MSSQLSvc/<SQL Server computer name>:1433      <Domain\Account>
    To      create an SPN for the FQDN of the SQL Server use the following command:
    setspn      -A MSSQLSvc/<SQL Server FQDN>:1433 <Domain\Account>
    If SQL Server service account is granted "Validated write to service principal name" privilege in Active Directory, SQL Server database engine will register itself when it starts and unregisters at shutdown. If you Domain Administrators do not permit this setting
    then you should manually register the SPN and the SSPI error will go away.
    Also the SQL Server service account must be granted "Account is trusted for delegation" privilege in Active Directory. If your SQL Server connects to other SQL Server using Linked Server then the server must also be granted "Trust this computer for delegation
    to any service" privilege.
    For a named instance, you can use the FQDN of the named instance instead of SQL Server FQDN and use the port number.
    For a clustered server, you should use the FQDN of the SQL Server virtual name. In this case you will need two entries, one with port name and one without such as
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN> <Domain\Account>
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN>:1433 <Domain\Account>
    Kerberos authentication works when SQL Server, Service Account and Windows account accessing the SQL Server are in same windows domain. If anyone these are in different domain, there must be bidirectional trust established between the domains, otherwise it
    does not work.

Maybe you are looking for