Outbound mails from SAP CRM server

Hi,
Is there any way by which Outbound mails from SAP CRM server can be routed to more than one mail servers?
Any suggestions or work arounds will be appreciated.
Thanks and regards,
Asheesh

Hello Asheesh,
it is possible to create more than one Mail Node in Transaction SCOT. The mail can then be routed depending on the Domain Name.
Regards
Gregor

Similar Messages

To send outbound mails from SAP

Hi team,
Here i need to configure email setting from SAP to any other email ID ( yahoo,gmail etc).For this configuration do i need to confgure any program or to genrate some RFC settings.
Can some one guide me the process step by step what to be done to send outbound mails from SAP. Immediate help will be really appreciated.
thanks in advance.

Check note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Markus

Send mail from SAP system to another SAP system

Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

Hi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY

To send an mail with external attachment check this one

first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv

Then include that report in the following report and copy the same code and paste it there

*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan

Upload/Read Documents from SAP-CRM to/from SharePoint

Hello ,
We have a requirement to upload documents from SAP CRM to share point(select the document from the desktop and pass the data to sharepoint server) , the user should also be able to view the documents located in Sharepoint.
There are web methods in SharePoint already developed which will allow the uploading of the documents and passing the location of the stored documents as URL back to CRM.
Could any one please help me in the follwoing
1. Configurations to do on SAP side for Calling the methods developed in Sharepoint.
2. Configuration to pass the document from SAP CRM(Uploaded from desktop) to sharepoint.
Thanks in advance

Hi Ravi,
We also have a similar requirement in which we need to read the document stored in an external server from SAP CRM. Can you please let me know know how you achieved this. I will know the exact path (URL) of the document. Using this is it possible to retrieve the content of the document.
Regards,
Sudha.

Error while sending mails from SAP

Hello Experts,
I am facing the below problem:
If an error occurs during the processing of a Z SAP transaction, an email needs to be sent to the user who is executing the transaction.
So, in this case the sender and receiver is the same user.
But the problem that i am facing is that for sending the mail from SAP, i have to maintain the email address in the user profile as blank. If I maintain some email address in the user profile, i encounter the following error:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address>: Sender address rejected .
Please help me resolve this.
Thanks a lot in advance to answer the above query.
Regards,
Himanshu

Hi Himanshu,
I think its the problem with mail server configured in ur system.
Please contact ur basis Person.Ask him to chk The SCOT tcode once.Maybe ur SMTP configuration is not done properly.Also chk this sap note 455140 - Configuration for e-mail, fax using SMTP
Regards,
Lakshman.

Call to Web Sevice in external system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Mike,
You should honestly search the SDN site for consuming web services with ABAP. There are some good examples.
However the general procedure is easy:
1. Generate an ABAP proxy using the WSDL provided to you by the external program
2. Configure an HTTP destination for the server of the web services (needed for HTTPS calls)
3. Configure the logical port for the web service using lpconfig
4. Write the abap code to call the webservice via the proxy. Works very similar to FM call in my opinion.
To expose a webservice(bapi being called from outside) you need to do a little more work
1. Create a web services for the RFC enabled function module via SE80
2. Use wsadmin and wsconfig to make the service available
3. Publish the service out to the UDDI as needed.
Once again this code is pretty well documented in the standard help and SDN. Do a simple search on ABAP proxies and you will find what you need.
Take care,
Stephen

Error Sending Mail from SAP

Hi all,
I am facing this error when i try to send a mail from Sap to external address. I have maintained the necessary settings in SCOT, maintained the email address in SU01and SAPconnect is activated in transaction SICF.
No delivery to ..... as recipient unknown
Can anyone help me out...
Thanks

Hello ..
I have followed the Recommendations and everything is going well but now I can only send emails from the same domain (my default domain), but cannot send outside that domain for example hotmail, gmail, yahoo..
The administrator said that: the Exchange server already has registered the IP SAP server to enable him to relay.(but like knowing if it is truth)
But nothing happens, The error is the same: No delivery to ..... as recipient unknown
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
thanks to all

Sending Mail from SAP to External Source

Hi Experts,
We are on ECC 6.0. I have configured the standard SAP system for
sending mails from within SAP to our company mail server. The
mails from SAP are going successfully to our official company
ids, But when i am trying to send mails to outside address like
eg. " email@removed " or " email@removed ", it is not going and
giving an error recipient unknown.
The configuration of SAPConnect is correct because mails are
going successfully to our company id, to send outside do i need
to do something extra???

It's Mail Relaying and it allows a mail server to send email (or relay it) on behalf of other systems. Many companies have relaying turned off because it is a security risk.
For example, allowing relaying will allow your system to send an email from xxx.com though your email server which manages emails for company.com. This could be used by a rogue to send spam through your email server.
Also, if you try to send an email from an account that your mail server does not handle some receiving servers may assume it is spam and block it.
For this reason, only allow mail relaying on the email server for your domain and only from the SAP systems. This will prevent abuse from occuring because relaying is enabled.
Have you set the default domain for SAPconnect:
[http://help.sap.com/saphelp_nw04/helpdata/EN/00/7c9962df8111d3a36400a0c943858e/content.htm]
Microsoft note on SMTP Relaying:
[http://support.microsoft.com/kb/304897]

How do I move mail from an old server to a new server?

I am rebuilding my server. The new server runs on OS X 10.9.4 with Server 3.1.2. The old server ran OS X 10.9.x and Server 3.x (the exact versions are not known).
Within the folder /Library/Server/Mail, I found the email stores for both systems. I have gone through each folder and identified the 36 character string that serves to identify the user's mailbox and paired each one to a user id on both systems. On the old system, there are multiple mailboxes for some users, and I think it is a result of the users being deleted and recreated: perhaps the system identified the identical name and assumed that the user might be different and therefore created a unique 36 character id for the mail system.
The trick is, I am trying to recover the mail from the old server.
I have attempted to copy the files which are human readable and formatted for SMTP transmission to the new server under the correct mailbox corresponding to the owning user (see screen shots below). The simple act of copying the files has not made these files visible via the IMAP protocol. I have tried restarting the mail service hoping that the Server app would rebuild whatever indexes need to be built so that the mail can be served via IMAP, and that has not worked either.
The question is, how do I get the mail from the old server mail boxes into the new server mailboxes?
This screen shot shows the location of one mail collection at /Library/Server/Mail/Data/mail/[userid]. Mail sits in the "new" folder only for a moment before being processed and put into the "cur" folder. Copying mail from the old server into the "new" folder produces an empty "new" folder, but one can see the files populate briefly before they are moved into the "cur" folder.
The next screen shot shows one email opened in TextEdit. The format should look very familiar. This is the same format that one would use to send SMTP requests to an SMTP server. This particular example happens to be an email from a Gmail account to the PediatricHeartCenter.org domain to test the mail system when the old server was set up. It was sent on 24 Jan 2014 and had text reading "Intended for Mavericks1. -Jared".

On further research, I have learned that OS X Server sets Dovecot to use the MailDir format. The email messages can be removed from the folders and put back, and as long as they were present in the folder to begin with (received by Dovecot originally), they reflect in the Mail.app on client computers. Deleting a file in the "cur" folder causes the file to disappear in Mail.app. Copying the file back into the "cur" folder will cause the file to reappear without any modification of an index file or any other system component, as long as the file was properly formatted by Dovecot to be identifiable to that folder.
According to Dovecot.org's review of MailDir found here (http://wiki2.dovecot.org/Ma,ilboxFormat/Maildir), the file name can be broken into simple pieces: " [unixtimestamp].[process id].[hostName],S=<message size>,W=<virtual message size>/2,[status tags]". The original MailDir++ specification requires the string ":2," to appear after the virtual size, but this file naming format is not legal in Mac OS X, so Dovecot is modified by Apple to use "/2," instead.
The Dovecot's wiki describes inserting new messages as follows:
Mail delivery
Qmail's how a message is delivered page suggests to deliver the mail like this:
Create a unique filename (only "time.pid.host" here, later Maildir spec has been updated to allow more uniqueness identifiers)
Do stat(tmp/<filename>). If the stat() found a file, wait 2 seconds and go back to step 1.
Create and write the message to the tmp/<filename>.
link() it into new/ directory. Although not mentioned here, the link() could again fail if the mail existed in new/ dir. In that case you should probably go back to step 1.
All this trouble is rather pointless. Only the first step is what really guarantees that the mails won't get overwritten, the rest just sounds nice. Even though they might catch a problem once in a while, they give no guaranteed protection and will just as easily pass duplicate filenames through and overwrite existing mails.
Step 2 is pointless because there's a race condition between steps 2 and 3. PID/host combination by itself should already guarantee that it never finds such a file. If it does, something's broken and the stat() check won't help since another process might be doing the same thing at the same time, and you end up writing to the same file in tmp/, causing the mail to get corrupted.
In step 4 the link() would fail if an identical file already existed in the maildir, right? Wrong. The file may already have been moved to cur/ directory, and since it may contain any number of flags by then you can't check with a simple stat() anymore if it exists or not.
Step 2 was pointed out to be useful if clock had moved backwards. However again this doesn't give any actual safety guarantees, because an identical base filename could already exist in cur/. Besides if the system was just rebooted, the file in tmp/ could probably be even overwritten safely (assuming it wasn't already link()ed to new/).
So really, all that's important in not getting mails overwritten in your maildir is the step 1: Always create filenames that are guaranteed to be unique. Forget about the 2 second waits and such that the Qmail's man page talks about.
The process described by the QMail man page referenced above suggests that as long as a file is placed in the "new" folder, that a mail reader can access it. The mail reader then moves the file to the "cur" folder and "cleans up" the "new" folder. This is clearly happening in OS X, because the messages are moving from "new" to "cur", but IMAP is still not serving these foreign messages to the remote readers.
The thought crossed my mind that perhaps it is the fact that the host name does not match, which would cause the failure, however changing the "host" portion of the name from the old-server to the new-server did not fix the issue. Even with the new server name in the file name, the inserted message fails to appear in client Mail applications.
Within the file their is header information that still references the old machine. I'd like to not have to change the email files, because this will violate the integrity of the message. Also, this might take a lot of time or incur risks associated with poor automated processing. The header information should not be referenced by Dovecot, because the wiki page describing MailDir notes that neither Dovecot nor Dovecot's implementation of IMAP refers to the messages header information when moving and serving these mail files.
Unlike when using mbox as mailbox format, where mail headers (for example Status, X-UID, etc.) are used to determine and store meta-data, the mail headers within maildir files are (usually) notused for this purpose by dovecot; neither when mails are created/moved/etc. via IMAP nor when maildirs are placed (e.g. copied or moved in the filesystem) in a mail location (and then "imported" by dovecot). Therefore, it is (usually) not necessary, to strip any such mail headers at the MTA, MDA or LDA (as it is recommended with mbox).
This paragraph leads me to believe that after the mail box is identified that the content of the file becomes irrelevant to the system which manages. This suggests that we should be able to inject messages into a mailbox and have the system serve them as though they had belonged in that mailbox all along. Yet I have not found a way to do this.

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

E-mail from SAP R/3 to Outlook

Hi,
I am facing issues when attempting to send e-mails from SAP R/3 to Outlook it gives following error. E-mail id of the user id correct but for some reason but I still get these odd error/no message.
There is no resource constraint from SAP R/3 side, I have even seen a case when both the e-mail ids(To & CC) were correct. It failed on CC and TO went successful and visa-versa.
1. When E-mail is erroring out in SOST
Internal error: No Send Order Generated. Error Code:NI_SREQ
Internal error: No Send Order Generated. Error Code:NI_SREQ
Message no. XS829
Diagnosis
An error occurred in program No Send Order Generated. Error Code:NI_SREQ
Error text:
Additional information:
System Response
Message processing terminated.
Procedure
Report the error to the SAP Hotline.
Log :
04/11/2007     10:30:28     Document sent
04/11/2007     10:30:28     Wait for communications service
04/11/2007     10:30:35     Internal error: No Send Order Generated. Error Code:NI_SREQ
04/11/2007     10:30:36     Document deleted from queue
2. When NO STATUS is updated in SAP - SOST.
Recipient Is Valid. Delivery Attempted
Message no. XS718
Diagnosis
The communication system recognized the recipient as valid and will send the message to this recipient, or will generate an appropriate status message if the message cannot be delivered.
System Response
Processing was completed normally.
Additional information on the node used (in the system language of the node, if available):
250 2.1.5 [email protected]
Procedure
No action is necessary.
04/11/2007     11:00:41     Document sent
04/11/2007     11:00:41     Wait for communications service
04/11/2007     11:05:35     Recipient Is Valid. Delivery Attempted
04/11/2007     11:05:35     Document deleted from queue
Appreciate your help in resolving the issue.
Thanks
Nani

Default domain is maintained.
This issue is happening only with few users when they are trying to send a mail through some customized Z t-code.
Recipient ................... Is Valid. Delivery Attempted.
Message XS718.
Pls advice.

Error in sending mail from SAP to microsoft outlook

Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AM

Hi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

Sample code to send a mail from SAP

Hi guys
could any one provide me with the
sample code to send a mail from SAP with text as the main body of that mail via bcs classes

Hi,
 Please go through this code: U can send mail;
Tables : zchp_cust-info.
DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: ENTRIES LIKE SY-TABIX.
DATA: NAME(15).
DATA: CON_NAME(20).
DATA: req_num like zchp_cust_info.
DATA: I_TAB_CHP LIKE ZCHP_CUST_INFO OCCURS 0 WITH HEADER LINE.
*data: reno like ZCHP_CUST_INFO-req_num value .
data input for the mail
select * from zchp_cust_info
appending table i_tab_chp where req_num = c_knumv.
LOOP AT I_TAB_CHP.
concatenate i_tab_chp-created_by i_tab_chp-req_num into CON_NAME.
*WRITE: / con_name.
ENDLOOP.
Fill the document
DOC_CHNG-OBJ_NAME = 'Refe'.
DOC_CHNG-OBJ_DESCR = 'TESCRA Ref Number !'.
DOC_CHNG-SENSITIVTY = 'P'.
*OBJCONT = 'Tescra'.
OBJCONT = CON_NAME.
APPEND OBJCONT.
OBJCONT = con_name.
APPEND OBJCONT.
DESCRIBE TABLE OBJCONT LINES ENTRIES.
READ TABLE OBJCONT INDEX ENTRIES.
DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
Fill the receiver list
CLEAR RECLIST.
RECLIST-RECEIVER = SY-UNAME. " replace with <login name>
RECLIST-REC_TYPE = 'B'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
CLEAR RECLIST.
RECLIST-RECEIVER = 'sapuser'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
Send the document
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 DOCUMENT_TYPE = 'RAW'
 DOCUMENT_DATA = DOC_CHNG
 PUT_IN_OUTBOX = 'X'
 TABLES
 OBJECT_CONTENT = OBJCONT
 RECEIVERS = RECLIST
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 OPERATION_NO_AUTHORIZATION = 4
 OTHERS = 99.
 CASE SY-SUBRC.
 WHEN 0.
 LOOP AT RECLIST.
 IF RECLIST-RECEIVER = SPACE.
 NAME = RECLIST-REC_ID.
 ELSE.
 NAME = RECLIST-RECEIVER.
 ENDIF.
 IF RECLIST-RETRN_CODE = 0.
 WRITE: / NAME, ': succesfully sent'.
 ELSE.
 WRITE: / NAME, ': error occured'.
 ENDIF.
 ENDLOOP.
 WHEN 1.
 WRITE: / 'Too many receivers specified !'.
 WHEN 2.
 WRITE: / 'No receiver got the document !'.
 WHEN 4.
 WRITE: / 'Missing send authority !'.
 WHEN OTHERS.
 WRITE: / 'Unexpected error occurred !'.
 ENDCASE.
Please provide points if the issue is solved.
Regards,
Sunil

Outbound mails from SAP CRM server

Similar Messages

Maybe you are looking for