Outbound plugin not gets loaded on mac

Hi
I am using adobe photoshop sdk CS5 on mac 10.6 snow leopard, I've build the outbound sample and copied the plugin to the import-export plugin folder. But when i am launching the photoshop application outbound menu is not showing under File->Export neither its about box.
What may be reason for this behaviour?
Thanks

I would double check the PiPL property for the entrypoint. I think I had a bunch of them wrong in the early drops of the SDK and I might still have that one wrong. Double check against a plug-in that is working for you. Here is the one from Dissolve:
#ifdef __PIMac__
#if (defined(__i386__))
    CodeMacIntel32 { "PluginMain" },
#endif
#if (defined(__x86_64__))
    CodeMacIntel64 { "PluginMain" },
#endif
#else
#if defined(_WIN64)
    CodeWin64X86 { "PluginMain" },
#else
    CodeWin32X86 { "PluginMain" },
#endif
#endif

Similar Messages

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
          <error-code>404</error-code>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
     <error-page>
          <error-code>500</error-code>
          <location>/faces/SessionExpirepage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>java.lang.Throwable</exception-type>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

Images not getting Loaded while running Java Application through jar file

Hello Friends,
I have a problem while starting my application.I have written my application using pure java.There is no JSP or anything just pure swings.Mine is a standalone appplication.So i used to run it using a batch file.And when i used to start my application it used to not show me the images.so what i did was i mentioned the starting directory in the properties of the batch file (ie in the start in column field).But that was when i was using weblogic server.And i have lot of people working on the same application.so i used ZAC publisher in weblogic and along with that i used to publish the batch file also.so the users dint have any problem.But now what is my problem is i m trying to use JAVA Webstart instead of weblogic ZAC.Now in webstart what happens is that i have to run the appliaction thru jar file.so where do i mention the class path so that the images get loaded.As of now the imaes are not getting loaded.i feel this is a class path problem.but where do i mention it that is my problem.It would be really helpfule if someone could help me out.
thanx and regards,
[email protected]

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

Outbound Delivery Not getting created

Hi Gurus,
Outbound Delivery Not getting created
there is a DESADV IDOC that is supposed to create inbound dely, do the GR then create Outbound delivery and shipment (all automized). But this is not happening.
There is workflow set up that is blocking this...Task no TS95000019 is responsible for passing the values. This will show up in the SAP inbox with error description. But i am able to see TS95000018 but TS95000019 is not showing up in the workflow log.
Can anyone let me know what setting is missing in workflow so that this task shows up and i can make the system create outboud delivery and shipment automatically
Please help
Sunil

Sunil
First check whether that particular task is active in your client.
For a task to get triggerred you need to activate the triggerring settings.
Use PFTC T-code, input your task as TS and ID as 95000019
click on view button
Then click on " Triggerring Events" tab page.
View whether your task 95000019 is active. Green light will appear next to it in the left most column. If it is grey or red, then you need to change it to green. Only then it will work. Once this gets triggerred, subsequently it will pass the message to your inbox with correct error message and then only create an outbound delivery.
Hope this will help you out !
Regards,
Syed Nasir

Some images are not getting loaded

I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
Hope this helps. :)

W_DAY_D is not getting Loaded with Enterprise WEEK or FISCAL week informati

HI Experts,
We have OBI Application 7.9.6.1 (FIN,SCM,PSA analytics application).
We are using Oracle EBS 12.0.6 as the source system.
we are using the Enteprise Calendar in EBS to load the W_DAY_D,but the W_DAY_D is not getting Loaded with Enterprise WEEK or FISCAL week informations,
does any one have an answer to this question,how to load theEnterprise WEEK or FISCAL week information in the W_DAY_D table??
We have raised an SR with Oracle Support & got the reply that this is a product BUG & they have internaly raised an Enhancement Request.
God knows when this will be fixed??
Can any one provide me with a work around ?/
Thanks

Hello:
Please look at these W_MCAL_PERIOD_D, and W_MCAL_DAY_D Tables for Fiscal information. For more information you can look at the RPD BMM Layer Dim - Date Fiscal Calendar.
With Regards,
Mohan

MDM 7.1.02.59 : Repository not getting loaded

We are experincing a problem.
The problem is Repository is not getting loaded. We have tried the
below:
1.#Verify-> Check Repository: 0 fatal and 0 Non-fatal errors.
2.#Verify-> Repair : 0 fatal and 0 Non-fatal errors were corrected
We Tried loading the Repository with Immediate and Update Indices
option. The error we get is:
Load aborted with error(0xFFAA0300: Table not found).
We tried restarting the server and database as well. But it gives same
error.
Any valubale suggestions on the same will be highly appreciated.
Thanks in advance .
Regards,
Nitin

Hi Nitin,
Can you post a list of all the database tables that are connected to this repository?
You'll have to access the database using a DB client or SQL. The DB schema for this repository should be named similar to the repository name.
Please be aware that there are two schemas per repository - one with suffix "_Z<3 digits>", one with "_M<3 digits>".
Best regards,
Dennis

Monthly sales forecast file upload new combinations not getting loaded.

For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
We run CIF daily and monthly also to include all new material.
When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
Can anyone advice.

Hi Siva,
To b frank I did not completely understand what you are talking about as you are all over.
As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
"Sold to party is new"-- where is this new? in the cube data?
"contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
This still does not stop the system from creating all combinations int he cube as CVCs.
The possible reasons why the combinations(CVCs) are not generated from cube:
1. If there are empty values in a record like below
Plant--Materialsales org.-customer---qty.
P1--M1SO1____----10
P2--M2SO2C2--
17
The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

CCM: More than two items in catalog are not getting loaded into CCM

Hi All,
We configured CCM to our client and working fine, but we are able to upload only two items. when we add third item or more items to catalog, these are not getting loaded in to CCM (The catalog is loading find and there is no problem when loading).
The log shows green, but items are not there in CCM.
Is any one faced similar problem?
How can we export master schema from CCM to desktop?
Thanks,
Ravi Varma

It is Supplier catalog
Ravi

Apps imattic not getting loaded on iPad or iPhone

I down loaded imattic apps from apps store. It got downloaded on the iPad, synced with iPhone as we'll, but the problem is the app imattic does not get loaded with any article it goes to loading and gets stuck there it self, it does not work on iPhone as we'll

Hello there, vikram80.
Sounds like your app is stuck downloading on both of your iOS devices. You can try tapping on the application icon to resume the download, as outline in this featured discussion:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out ot Apple Support Communites.
Cheers,
Pedro.

My Bose Companion 5 speakers are not getting detected in mac pro. They are working fine with other machines (including mac).

My bose companion 5 speakers are not getting detected on Mac Pro. They are working fine with other machines (including friend's mac)

Same Issue here. I had a similar issue with my Bose USB speakers when I upgraded to Maverick. I've had the speakers since 2010 and had no issue with my 2006 Mac Pro or my iMac till the Maverick upgrade, contacted both Apple and Bose with no luck but an Apple update fixed the issue.
I wonder if other USB speakers have an issue or is it just BOSE USB speakers. But my Companions did work fine with my Mac Pro and iMac 27 till the Yosemite update with an initial issue with the Maverick upgrade it was definitely an Apple issue not Bose. I have both Boise Airplay and Blue tooth speakers that seem OK it is only the USB Companions that don't work.
Will look forward to a solution.
Thanks,
Rich

Trying to load the sample plugin snippetRunner but it's not getting loaded

I tried to load the sample pluggin SniipetRunner and open Indesign.
Indesign opened successfully and is showing other plug-ins in the plug-in drop down but now SnippetRunner
any idea?

I had the same problem. The SnippetRunner can be found under "Window" in the top menu bar. A screenshot can be seen here: http://stackoverflow.com/questions/23214516/indesign-sdk-sample-plugin-not-working/2323971 5#23239715

Applet not getting loaded in Windows Vista's Mozilla Browser

Hi,
When I open the URL http://www.operamini.com/demo/ , the applet in that site gets loaded from windows XP and linux, but not from windows vista, for the same firefox version. When I refer the Java console I get the message lissted below.
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
load: class org.microemu.applet.Main not found.
java.lang.ClassNotFoundException: org.microemu.applet.Main
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What can be the reason? what should be done to overcome this?Is it due to any version incompatibility of Java? I have no idea regarding this.
Please help
Rony

there are other issues as well - in Safari:
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/s.png] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
       me2.o.a(null:-1)

Outbound plugin not gets loaded on mac

Similar Messages

Maybe you are looking for