Outbound process for VMI.

Dear Expert,
I working about VMI project and concern to Idoc for send data to vendor via EDI.
But now I don't know about Idoc. Please tell me for how to start about Idoc step by step of outbound process (such as segment->Idoc type->etc....).
Thanks,
Pongsak

hi,
outbound process for IDOC:
hi follow this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
hope this may hlep you,
Regards,
srinivas

Similar Messages

To automate outbound process for a particular customer

Hi All,
I have setup a edi 855 outbound process, I don't know how make the 855 happen automatically for received 850 for a particular new customer. can anyone help me... cos we are supposed to go-live anytime next week...

Hi,
You should enhance the standard Data source 0customer_attr with that additional partner function (sales head) as per the proper logic and replicate the same . if it is 3.5 that same object( related to that field length and data type) same object can be added as attribute at info object level and do the transfer rules and activate that and try to the load.
Thanks & Regards,
Sathish

Status in SXMB_MONI ( Recorded for outbound Processing )

Hi All,
I getting a status "Recorded for Outbound Processing" for all interfaces in SXMB_MONI. Earlier all the Interfaces were working fine.
Kindly let me know your valuable inputs...
Thanks & Regards,
Ankur

Hi Ankur,
Pls do check the following.
1. Pls check whether on the outbound side the user id and password you are using are correct and is not changed.
2. The messages are getting assigned into the queues and the queue processing is happening properly.
3. If the volume of data is more, say for eg more no of idocs, etc. then it will take some time for the processing.
4. First of all go to the message monitoring tool and cancel all the messages of the same interface which is 'on hold' status and cancel them all from the beginning.
Cheers
JK

UCCE - Flowing abandon calls to outbound process

Hi all,
Is there a way to perform the following?
a) Standard report in webview/cuic which shows all the abandon calls. The intention is getting the list to manually call them back without hitting the RCD/TCD tables.
b) Flowing/routing (ICM+CVP) these abandon calls into the outbound process for preview/predictive dialing
Thanks!
-JT-

You don't want to query the TCD - just query the RCD (Route_Call_Detail) table. You are not interested in the agent involved, since these calls abandon.
Here is a simple query you can run that will show abandoned calls in the last hour to get you started. I'm only interested in calls where I can get the ANI, because I want to call those customers back.
-- Declare the start and end time variables
declare @start datetime
declare @end datetime
-- Look back 1 hour from now
set @start = DATEADD(mi, -60, getdate())
set @end = getdate()
-- Find abandon customer calls that occurred in the last hour
select DateTime, ANI, RouterErrorCode,
DialedNumberString, Variable10, RouterQueueTime
from Route_Call_Detail
where DateTime >= @start and DateTime < @end
and RouterErrorCode = 448 and RouterQueueTime > 0
and ANI is not NULL and ANI <> 'anonymous'
In my query I actually have "and DialedNumberString like '188%' " at the end of the "WHERE" clause, since all my outside dialed numbers start with 188 (from translation rules on the gateway.) Adjust to suit.
This is just a starting point for you. I have refined this a number of times - I put the abandoned calls into a temporary table then check each of the ANIs to see if they successfully called (RouterErrorCode=0) back. If you control the timespan on the RCD, this is a very fast query.
Regards,
Geoff

Schedule lines for outbound process

hi
can anyone tell me what is schedule lines for outbound process
thanks

thanks charlie for your answer can you pl tell me what does it means configured delivery types, item categories and schedule line for outbound processes.
thanks

Troubleshoot: How to process messages in "Recorded for Outbound processing"

Dear Experts,
I have File >XI(3.0)>IDoc scenario with 10-25 interfaces. Per interface an average of 200 msges.
Now we have an issue. from past 6 days all the messages for one of the interfaces are in status: "Recorded for Outbound processing"(with that single small black right arrow) in SXMB_MONI(around 1760 till now). Other than this few 100 messages for couple other interfaces are also in same status. There are other message interfaces using the same Idoc type; but they dont have this problem.
I have checked the queues: SMQ1/Q2. There are no errors. The other threads mention about some reports; but all are for error messages. So that also did not help!
On the first day someone had deleted the error queue entry. They had first checked the message in the queues but that was not showing any status. (This is very strange... but for some messages , the left most status column is not showing any status at all.. but while clicking on the end time column; I am getting the pop up which says succesfully processed). But this is not our problem right now.
Please help me process the messages in the "Recorded for Outbound processing" status.. some how!!!
Thanks in advance for your inputs....
P.N: Runtime workbench here is not configured properly. No CC monitoring tab; message monitoring shows only adapter messages etc.... So cannot check anything here

Thank you for your inputs.
@Udo.... SMQR- no issues.
The RFC destination is fine.
@Abhishek The Idoc has not reached SAP. The xml messages in XI are in "Recorded for outbound processing" which is kinda like Scheduled, i think. Anyway I checked the R/3 cant find the messages or errors.
Any help would be highly appreciated....

Delete messages stuck in status 12, Recorded for Outbound Processing

I am on a PI 7.10 SP8 system. I have 59,000 XML messages showing in status 12 ( Recorded for Outbound Processing) that I would like to just delete or cancel. These have accumulated over several days of testing interfaces. If I have to allow them to be processed, that would also work but is not needed. I have read about 6 different forum threads and tried several things but nothing has worked yet. 
The messages can not be cancelled from SXMB_MONI. 
The queues are no longer showing in SMQ2. 
I have tried restarting and re-registering the queues. 
I've tried RSXMB_RESTART_MESSAGES and RSXMB_CANCEL_MESSAGES. 
SWPR & SWPC show nothing to restart. 
Any ideas on something else to try? 

Hi,
You can try to delete or archive mesages. use following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Delete Messages SXMB_MONI
http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Too many questions on Archive/Delete messages.
Inder

"Scheduled for Outbound processing" message

Hi,
My scenario is: R/3 (IDoc Customer) -> XI -> PC (file) and I use a BPM with option "multi to single".
In the Message Monitoring, I have two steps:
1. Idoc DEBMAS06 --> BPM:
status = "Processed successfully". Thus it's ok.
2. BPM --> my PC:
status = "Scheduled for Outbound processing" and in column "outbound" I have not "IENGINE". There is no other error message and obviously no data are sent to my PC.
Have you already seen this message?
And have you a solution?
Note: Last friday, the same scenario was ok. I have just changed some data inside the mapping (occurence was not change).
Mickael.

Hi,
Try resetting the status to "Ready".
If you get SYSFAIL again, try deleting that particular LUW. If there are other messages waiting in the queue, just click on the unlock queue button and the remaining messages will flow thru.
Regards,
Sridhar

Scheduled for Outbound Processing

Hi,
I have a simple problem: I want to send a XML file from a place to another place. When I put the file in the sender folder, XI import this file correctly, therefore, the file doesn't go to the receiver folder.
In the XML monitor, the current status (message lifecycle) is "Scheduled for Outbound Processing".
What can be happening?
Tks,
Douglas

Hello Douglas,
I think that message is sitting in the queue. May be you should check whether queue registrations are done already. Otherwise the message might sit in the outbound queue. You can goto the queue entry (from monitoring) and unlock it if this is the case.
Regards
Rampi.

Scheduled for Outbound Processing in SXMB_MONI

I have a scenario RFC -> ccBpm1 -> ccBpm2 -> ccBpm3 -> RFC.
The scenario was working perfectly. I made some simple changes in ccBpm3 and some errors started to happen.
The Xml message from ccBpm1 to ccBpm2 started to stuck (message Scheduled for Outbound Processing in SXMB_MONI). I didn´t make ANY change in ccBpm1 or ccBpm2, before the error started.
When I made a "dummy" change in ccBpm2 and I reactivate it, the message from ccBpm1 to ccBpm2 process, but then the message from ccBpm2 to ccBpm3 stucks. If I do a dummy change in ccBpm3, the message from ccBpm1 to ccBpm2 stucks again.
I have no Queues locks in smq1 and smq2. The Cache status are all 0 in SXI_CACHE. I have tried to reimport all Integration Process in Integration Directory, but no sucess.
Seems to be any kind of bug.
Any idea?
Thanks

First, I would like to know.. if there was a justification to divide the scenario into 3 BPMs. Because BPMs add to system performance. They get converted to workflows on abap engine and context switches from java to abap engine. You might want to check you configuration in ID test configuration and then close analysis of the message processing in each of the ccBPMs.
VJ

Scheduled for Outbound processing - Sysfail

I´m trying to build a (Mail-> XI -> File) Scenario and I´m having some problems.
The attachment of the mail must be passed to xi bpm and for that I used the module PayloadswapBean
(according to /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapterpayloadswapbeanstep-by-step)
On SXMB_MONI I checked that the Mail -> XI message have worked fine. But inside the BPM, the senders steps doesn´t work, all keep "Scheduled for Outbound processing" status
I´ve tried a sent step to Sap r/3, to File, and all have the same error. In runtime workbench, I checked that the messages aren´t arriving to adapter.
In SMQ2 I checked that when this error happens, a queue is created with status Sysfail. On details of message it says "Access with 'ZERO' object reference not possible."
Can anyone help me please ?
Thanks
Vitor Zaninotto

Is the sender getting invoked in the BPM? If yes then check in the adapter engine for any errors for that particular message. My guess is there would be some messages of the same instance which are stuck in the adapter engine. Once you clear the error/messages, try restarting the queue. This might solve the problem.
Cheers,
Sarath
Award points if helpful.

Query for Outbound Processing through change pointers

Hi,
I have a reduced Message type for HRMD_A07, for which change pointers are activated. So whenver the changes are tracked, it sends all the changes into 1 IDOC. My requirement is to send Employee wise single IDOC, rather than collection of all the changes at once.
Any inputs would be helpful.
Regards,
Heena

Hi
Since change pointers are specific to the fields based on the change documents for that so i dont think that you may get the Idoc details based on the emplyee.
1.To get the desired ouput we have to either schedule the program RBDMIDOC for lesser intervals of time so that it can collect the data regularly.
2.Based on the chages updated in CDHDR or CDPOS we have to update the details in the user exits for the outbound process code.
3.Else you collect the changes from CDHDR and CDPOS employee wise and manullay populate the idoc.
Thanks & Regards
Jyo

Message stuck in SXMB_MONI status " Sceduled for Outbound Process." Urgent

Hello All,
All messages in our XI environment are getting stuck with status Scheduled for Outbound Processing ...I have already done the following..
1) Registered the Queues
2) Deleted entries in SMQ1 and SMQ2 and restarted messages
Last time we had this issue, we were finally able to reslove it by doing a J2EE restart. But this has resurfaced again within a week, and this time even the restart is not working.
Do you think some parameter has been set incorrectly during the install ..
Any help would be appreciated ..
thanks
Mayank

Hey Mayank,
Did you got JCO failure error for any of XI message before start of getting this error message?
If so it's failing because of RFC connection problem...
You need to go to Tcode : SM59 in your xi server
check the TCP/IP Connections which is created while post-installation phase..
1. AI_RUNTIME_JCOSERVER.
2. AI_DIRECTORY_JCOSERVER
Solution : Increase the default value for CPIC_MAX_CONV (se note 314530).
Hope this wull solve your problem.
Nilesh

MIRO - Idoc for outbound process ( LIV)

Friends,
SAP has to send the following data to Oracle Financials. XI is the interface. So I need to identify the idocs used in LIV ( Invoice Verification) module.
Can any one help me what idoc / bapi should i use for the below outbound process.
Vendor invoice and credit memo
Also, i heard transactional data cannot be triggered by programs RBDMIDOC and it will be send automatically.
How can I send the idoc automatically in the outbound ALE layer. Is theres any message type to set up or any program to be execute. In other words , how the change pointer is triggered for the transactional LIV data.
Regards
Raj

Raj,
It really depends on where you are sending yor IDOC or whom you want to be informed.. If you think it is just for records.. After reding your initial description.. if it is an ERS based invoice, you could use ERS, else
Create a new condition table and include all teh fields that you want.. make sure you do not mix the item fields with the header,
Include that table in a custom access sequence that you create and assign a new message type-- custom again..
That is the only way you'd actually be able to capture all teh fields and information you want.

Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

Hi EDI Gurus,
I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

Hi,
there is no process code for MessageType LOIPRO .
check the below link u will get the clear idea.
Re: Process Code for Outbound Production Order??
Reward if helpful.
Regards,
Nagaraj

Outbound process for VMI.

Similar Messages

Maybe you are looking for