Outbound Proxy - Message Recorded(Commit Missing)

Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan Bhasha

Do the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R

Similar Messages

Error in SXMB_MONI - "Message Recorded (Commit Missing)"

We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

XML Status : 'Message recorded, commit missing"

Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
Sandeep

I think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK

Outbound Proxy message missing in PI

Hi ALL,
i created a OutBound Asyn service interface and i created a Proxy for the same .now when i Run it .the XML i am able to see in the SXMB_MONI of the sender ECC system ,but i am not able to see the same the message in the SXMB_MONI of the PI system,
do i need to create End setting like RFC or Prots .from Ecc to PI ystrem .or anything else for receiving the message in the PI system.. from Ecc system.. ?
thanks
Souz

Dominic , your issue seems to be that message is not getting stored in ECC right since the message is in SXMB_MONI of PI, in that case check with your BASIS team on the config. in SXMB_ADM in ECC
Regards,
Senthil Nattamai Sekar

Outbound Proxy messages in SXI_MONITOR of R/3 system in status "Scheduled"

Hi guys,
I have the following issue:
In a Proxy-to-File Scenario, we are trying to send some data from R/3, but they never reach XI because they remain in sender R/3 system, transaction SXI_MONITOR with status "Scheduled", with a green flag. I cannot see them in SM58 neither.
Do you have any idea ?
Best Regards,
Evaggelos Gkatzios

Hi Evaggelos,
I have face same issue.But i had resolved it.This issue is related to Queues.Your objects are struct in queues.Please do the following steps.
1)Go to SXMB_ADM
2)Select Manage queues->register queues->Activate queues
Note:Before u r register the queues,delete the queue objects in SMQ2 otherwise it will gives error
3) Refresh the Cache objects SXI_CACHE
http://<hostname>:<port>/CPACache/refresh?mode=full
http://<hostname>:<port>/CPACache/refresh?mode=delta
Thanks
Ravi

ABAP PROXY--Commit missing

Hi,
I am working on a scenario outbound from SAP Using Proxies :
When I check SXMB_MONI in R/3 the message has the status
Message Recorded(commit missing).
Can any one help me on this .
I guess we have to manage queues(SXMB_ADM).If so Please let me know how can i do.
Thanks,
Ravi P

Hi Udo,
Thanks ya.
I guess Commit work is not requried when we are working on the synchronous proxies.Correct me if i am wrong.
Ravi P

SRM XI standard content ...SRM Server 7.0 - Outbound proxy not working

Hello All,
we have integrated SRM SUS with ECC 6.0 using XI standard content XI SRMSERVER IC 7.0. With same configuration, Purchase Order has been send from ECC to SUS and PO is created successfully in SRM SUS. But, while confirming the purchase order, its not generating outbound proxy message.
And when we check the interface PurchaseOrderConfirmation_Out(i.e dobule clicking) in SPROXY transaction of SRM SUS, getting the following LOG:
1. Logical port template is inconsistent, regenerate it and activate it
2. cannot create LPT without DT profiles
3. Regernate proxy(inactive version incorrect)
Let me know if you have any suggestions.
Regards,
Sreenivas.

Hello Srinivas,
1.Check your Port creation from ECC to XI 2 SRM.
2. Activate your proxies properly and check whethar your proxy communication working properly or not.
check this links for your reference.
MM -XI-SUS
MM System - XI - SUS
MM-XI
How to integrate MM using XI
SRM-XI
SRM and XI Integration
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
SRM and XI
Is there pre-configured message mapping for SRM Content?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
SRM XI scenario
Which version of SRM needs XI?
SRM AND SAP XI
XI with SRM 4.0
Regards,
Mahesh

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

ABAP Outbound Proxy: some messages stuck in CRM system

Hi all,
we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
Any idea where could be the problem / we should check?
BR
Holger

On which SP r u working correctly. May be an SP upgrade could help.
Regards,
Prateek

TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

Do you still get that one if you restart the PC and try to connect again?

Outbound Proxy - No XML message seen !!!!!!!!!!

Hi All
I am trying to use outbound ABAP proxy from an R/3 system . I have written a Z program to triger the execute_asynchronous method of the proxy generated. Now when i go to see the SXMB_MONI txn to see any XML message flow i dont see anything .
Any pointers so to what need to be perfect to see a XML message is the monitor for an outbound proxy??
Thanks in advance for your help
rohan

Hi,
Generally the message goes in the schedule mode when the target system is not available or the connection to target system is broken. Pl check the target system.
You can use this weblog as checklist.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Thanks,
Prateek
Message was edited by: Prateek Shah

Outbound Proxy is triggered from CRM 4.0, tag is missing in the payload

Hi,
A Outbound Proxy is triggered from CRM 4.0, one of the tag is missing in the payload. I had checked the SXMB_MONI in CRM and in XI as well both seems to miss that. I checked the BADI which triggers this PROXY the data is rightly populated to the PROXY method. Also, this problem is not occuring regularly but few times it misses the same tag. The occurrance defined in the datatype is 0 to 1. Can anyone help why this is happening..
Many Thanks..

This could rather be a logical error. May be the logic is not populating the XML tag on those occassions. I would suggest to debug in that direction.
VJ

After installiing ios6 to ipad i no longer have my photos or apps and cannot connect to iTunes on my computer. Get message saying pairing record is missing.Can anyone help please?

After installing ios6 to ipad2 I no longer it went back to factory settings. I cannot sync iTunes on my computer with the iPad but get a message "pairing record is missing". Can anyone help me.

I need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

New IPad error message when connecting to Itunes: Pairing record is missing

Pairing Record is missing and Itunes can not connect to my ipad. How do I resolve?

These directions should help you: http://computerknowhow101.com/iso/a-fix-for-pairing-record-missing-error

Problems with 'COMMIT MISSING' - when using ABAP client proxies

Hi
We have a requirement - wherein while SAP std inbound IDOCs are being processed in the R/3 system- we need to monitor the processing of idocs - by sending relevant information out of the R3 system to a monitoring dashboard - outside of the R/3 environment.
Inorder to accomplish the above, we generated a async. client proxy class in the R3 system by pointing to a XI o/b message interface and that interface mapped on to DB calls - from which the dashboard was bringing up status of idocs being processed in R3
We made a call to the async class method from within the idoc user exit that lies within IDOC_INPUT_ORDERS FM . The user exit chosen to make the call was - after the salesorder processing for the inbound idoc was done in the above FM. We have not given any COMMIT WORK statement after the async client proxy method call within the user exit - since the call was being made from within user exit and we did not want to upset SAP std processing flow.
Now, when the inbound idoc processing is being done by using SAP std program rbdapp01 using parallel processing option of packets, the outbound message generated is in 'COMMIT MISSING' status - whereas - when rbdapp01 is executed in normal mode - the proxy message is sent out ok out of the R3 integration engine.
The program rbdapp01 has a COMMIT WORK statement after each IDOC packet is processed - but still with the parallel processing option - the proxy message stays in th R3 box - with the status 'COMMIT MISSING'
Any thoughts/ pointers on this is appreciated....

Hi Karthik,
I don't think you can get this to work using an asynchronous proxy - except perhaps by spawning an update task to send the data.
Perhaps you can re-cast this as a synchronous interface?
Regards,
Thorsten

Outbound Proxy - Message Recorded(Commit Missing)

Similar Messages

Maybe you are looking for