Outbound Queue got deleted during ECC upgrade

Hi,
After ECC EHP6 Upgrade Outbound Queue in SMQ1 got deleted for data source 0F_GL_14 in ECC, but delta queue exists under RSA7.
how to re-generate outbound Queue which got deleted during Upgrade?
Santhosh

Hi Shantosh,
In this case, please follow the below steps -
1. Delete the delta for your info package, and do init without data transfer.
2. After this first fill your setup tables with SBIW tcode,
3. And run your Info Package with Repair full request the data will come to PSA now, anyway ur DSO will overwrite all the existing records and add only the fresh records.
4. Later enable your delta for the Info Package. This will absolutely go fine.
Thanks..!!
Regards,
Harish. K

Similar Messages

BW Extractors During ECC Upgrade

All, We are moving from 46B to ECC. One of the open questions we have is what needs to be done during the upgrade prepare phase with the extractors from our BW system.
We are using the downtime minimized approach, so the prepare phase will start several days prior to the start of upgrade downtime. Here is the question: We have 50+ delta extractors running that pull data from the ECC system to BW. SAP has told us that during the prepare phase (this is during system uptime) we will need to turn off the extractors and clear the delta queues prior to the prepare phase running. But they are also telling us that we COULD turn them back on after prepare is complete but before the downtime starts but that they do not recommend it.
Any experience with BW extractors and an ECC upgrade? Since we are starting the ECC prepare phase several days prior to the start of downtime for the upgrade, we are trying to determine whether we will be without BW feeds for that entire time or only during the downtime.
Thanks!

> Thanks for the reply. So you see no reason to have
> the extrators off the entire time between when
> RSVBCHK is run during prepare and when it is run
> during the downtime?
No - I don't see it. We used that procedure when we went from 4.6 to 4.7 and it worked - we didn't have any data loss.
> We will have approximately 48 hours between the
> prepare and the start of downtime and obviously the
> business would prefer to have the extracts available
> during this time.
RSVBCHK doesn't just check for the BI deltas but for cancelled update tasks too and some more things.
You must though make sure that nobody creates any more deltas (thus no more production) after you passed RSVBCHK during UPGRADE OR make sure, someone is around at a later point before you shutdown the system and load the data out of the R/3 system. You must make sure that all deltas are loaded before you enter MODPROF_TRANS, if you still have delta there, it will be lost.
Markus

MDMP Unicode Conversion problem during ECC upgrade

hi Experts,
I met a problem when upgrade from 4.6c to ecc 6.
in 4.6c, some key users made some chinese written entries in table field while he/she was logon as English, so, the language field in this entry is "EN" although the actual language was written by chinese, after upgrade to ECC6, we found the chinese words became messy code, maybe it was due to the chinese were encoded by english codepage during conversion, my question is, how can I avoid this? I really don't want this happen in our PRD upgrade.
The second question is: if a field contains both chinese and english, then, which language should it be assigned? english or chinese? I'm afraid if we assign this word as "EN" in vocabulary, then, after upgrade, the chinese part will be messy code.
Thank you for your kind suggestions.
Freshman

Hi,
you can either use transaction SUMG (manually) to repair the entries ( you have to add the according table - please check unicode conversion guide for details) or you need to change the language key in the table to Chinese if you want the Unicode conversion to convert the data correctly.
To your second question: If the English texts are restricted to US7ASCII characters ("normal" English without special characters) those texts containing Chinese and English words can (and must !) be assigned to ZH, as US7ASCII characters are included in the Chinese code page.
Best regards,
Nilsn Buerckel

TS2776 can I get back my lost music that got deleted during sync process?

During the sync process my music 471 songs to be exact were deleted although I thought the option given said to remove and sync with this itunes library, can I get them back or is it a lost cause???? Hoping it is not, I just found my IPOD touch after it has been missing for more than a year!

Downloading past purchases from the App Store ... - Support - Apple

Is there any way to retreive playlists that got deleted during an ipod sync?

I was attempting to add new music to my iPod, and it didn't want to do it. Finally it did, but in the process it deleted all the music. I managed to bring back most of the music, but I can't find the playlists. Any help on finding them and getting them back?

Maybe:
iPod recovery software to restore lost music files

Do TSE05 Pattern Entries Get Deleted During Upgrade?

I have read in this forum that you can add records to table TSE05 to create a default header for your programs.
One of the examples stated to use this: APP_OBJ = ADDM and KEYWORD = REPORT
If I use that key to add records, I am using an SAP key. Currently, there are 9 records in the table for that key. If I were to add records 10 - 20, wouldn't my records be deleted during an upgrade? I understand that only records where APP_OBJ = 'U*' are not overwritten.

Hi Brenda,
please save the records of the table TSE05 either with download using SE16 or write a little program to save the data.
After the upgrade you can control the new table. If you miss your entries load them from your table-backup.
Regards
Josef!

Anyconnect Client profile files deleted after client upgrade

L.S.
I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
The ASA I am connecting to is a 5510 running ASA OS 8.4.5
The problem I have is the following:
We are using machine certificate authentication combined with RADIUS user authentication.
The machine certificates are stored in the Machine/Personal container in the local machine.
By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
We do not want to have the user run the client as administrator (in elevated mode) all the time.
Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
The VPN is established.
However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
This means the user cannot connect without using elevated rights the next time he wants to connect.
If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

Hi poiu720408 ,
1. You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration. So once the user connect to the proper URL/alias the profile will be applied.
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
3. This behavior is totally expected and they should disappear after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
Please rate helpful post !
Hope this helps
- Randy -

Can UCCHECK be performed on already UNICODE migrated system during ECC upgr

Hi there,
Can UCCHECK be performed on already UNICODE migrated system during ECC upgrade?
If NO, why? What is the technical reason?
Prakash

Hi,
first unicode means
Unicode is a 16-bit code to represent universal character set, which is used to facilitate a better exchange of data between different systems.
for uncheck
The transaction UCCHECK is used to find Unicode related issues. You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
why you are checking second time.
Regards,
Madhu

SAP ECC Upgrade : Userexit or Related Enhancement been Overwriten

Hi All,
Is that anyone get explanation from SAP why during ECC upgrade most of the enhancement been overwritten and need to re-do.
Thank in advance on your knowledge sharing.
Trevor Wong.

Ok. There might be need to do "adjustmens" in case of upgrade conflict, or just simple confirmations of code enhancements in transactions SPAU + SPAU_ENH.
I think you should find all missing code enhancements there, waiting for adjustment.

Will anything be deleted during installation?

I'm about to install Snow Leopard 10.6.3. I have some pretty important pictures and documents. Will any movies, pictures, or documents be deleted during installation?

They shouldn't be lost or deleted during the upgrade, but as a precaution one should always have a backup of some sort on an External Hard Drive.
see > Mac OS X v10.5, v10.6: How to back up and restore your files
Personally I started using > Carbon Copy Cloner - Home way back in Tiger and Leopard and still use it today in Snow Leopard and Mountain Lion

QRFC outbound queue

Hello all,
In the outbound queue of a R3/ECC system, I find messages with status as "Message edited in the target system".
What could be reason for this and what is the work around to solve this problem ?

Hi,
Did you get resolutoin to your problem here? We have BI queues in ECC which have been running just fine for over a year now and out of no where this just started happening to one of our LO extraction processes in ECC. We have raised our issue to SAP but at this point can not find any notes pertaining to this type of message being in a ECC outbound queue for BI.
thanks

Error in Outbound Queue while Releasing order from CRM to ECC

Hi,
When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
Can you please tell me why this error is coming?
Thanks,
Sandeep

Hello Sandeep,
During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
If a call screen is executed, there is the mentioned error.
Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
Best regards,
Maggie

Delete Outbound Queue : SMQ1

Dear Friends
I am upgrading my ECC6 PRD Server by EHP5.
My Check Roadmap step has been completed with warnings!
I Knew it to release and delete by the LBWE and LBWQ.
But my question is that i need to delete it now in CHECK and PREPROCESSING phase.
or
Delete it in the DOWNTIME phase ! becuase, the PRD system in integrated with BI PRD server and the data is collecting each hourly.
Please advise.
A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->
Long text:
    Cause
      Changing extraction structure &V#& for application &V#& is forbidden,
      because there are entries that have not yet been processed into an
      extraction queue for application &V#& for at least one client.
      If an extraction structure is changed to the entries that are still
      open in an extraction queue, then these are no longer able to be read
      and can cause terminations with the collective update.
    What to do
      Start the collective update using the function "Job Control" in the
      <DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
      To get an overview of the logistics extraction queues, see the
      <DS:TRAN.LBWQ>Logistics Queue Overview</>.

Dear Anwer,
As long as you are in prepare or uptime of the upgrade you can
ignore the errors in the RSVBCHCK which say that there exist
update records (as it is normal that there are update records
in a system which is productively used).
In the downtime there is also a check on update records. In the downtime
this check cannot be ignored.
You can also read note 328181.
Please also refer to the upgrade guide with this regard.
SAP Enhancement Package 4 for SAP ERP 6.0 ABAP:
page 105********************************************************
Outstanding or Incomplete Updates (Phase JOB_RSVBCHCK2)
If there are any outstanding or incomplete updates, the upgrade stops in
this phase with a message.
If errors occur in this phase and you have not stopped production
operation yet, you can skip these
errors with ignore without entering a password. However, we recommend
that you check for these updates and clean them up. The message is:
Update records still exist - Please process
page 103*******************************************************
Update records still exist - please process
Make sure that you have cleaned up all outstanding updates.
Make sure that you have cleaned up all outbound queue RFC calls by the
JOB_RSVBCHCK_R or JOB_RSVBCHCK_D phase (during downtime) at the latest.
If you are still in the preparation phase (before the beginning of the
Preprocessing roadmap step) and therefore in production operation, you
must only delete the terminated updates.
Also during the production downtime for such issues you can check the
following information:
This error is caused because the updates have been deleted but
entries in tables related to the update process are not empty:
- tables VBDATA,VBMOD and VBHDR should all be empty
To avoid the error message , run report RSM13002 with "delete" option
to delete update records as explained in attached note 67014. After
that you can repeat the phase, the incidence should have been solved.
-> 67014 - Reorganizing update requests
Information remains same for EHP5 as well.
Regards,
Abhishek

Deleting an outbound queue SMQ1

HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
Mike

Hello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues

Deleting Outbound Queues in SMQ1

Dear Experts,
System landscape: ECC 6.0, SRM 5.0
I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
If I need to delete the queue, can you please let me know how to delete this outbound queue.
Points will be rewarded.
Thanks in advance,
Bob.

Hi Bob,
I'm not sure if I completely understand your question.
You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
Hope this helps!
Thanks,
Aravind

Outbound Queue got deleted during ECC upgrade

Similar Messages

Maybe you are looking for