Outbound status to delete XML messages in PI

Hi,
we are using a deletion process in PI wiith the pg RSXMB_DELETE_MESSAGES but the XML messages with a outbound status = 1 cannot be deleted. It seems that the pg SXMS_REFRESH_ADAPTER_STATUS permits to change the status to 6 but does not work for me.
So, I need guidance. For information, we condigured the deletion period (10 days).
Thank you

Hi Pascal,
You should try to manually confirm the messages (in SXMB_MONI - Cancel Processing of messages with Error CTRL F8) and then run all the deletion jobs again.
Please see Note 872388 and 820149 for details. Following is the relevant portion from 872388:
"Check if there are asynchronous messages in error status.
Asynchronous messages in error status are neither deleted nor archived.
This behaviour is different to erroneous synchronous messages which get
deleted after their retention period (see step 5) has expired).
Asynchronous erronous messages, however, must be cancelled and then be
archived. You can either use transaction SXMB_MONI, search for erronous
messages and manually cancel them. Or you can use the report provided by
SAP: RSXMB_CANCEL_MESSAGES. Should you decide (for non-productive
systems only) that you would like to delete these manually cancelled
messages, please use note 820149."
Regards
joel

Similar Messages

SXMB_MONI: Outbound Status Red (Need Err Message Alerts)

What is the best way to setup meaasge alerts in XI for a red flag in SXMB_MONI in the "Outbound Status" field? We currently have error messageing setup in ALERTCATDEF that will send an error message when the "Status" field is a red flag but I don't know if there is a way to point it to the "Outbound Status" also. We use the following short text in ALERTCATDEF for notification:
System: &SXMS_ERRSRC_SYSNAME&
POS XI Message ID:    &SXMS_MSG_GUID&
POS XI Error Category:    &SXMS_ERROR_CAT&
POS XI Error Code:    &SXMS_ERROR_CODE&
I am thinking tha ALERTCATDEF will only send an alert when the "Status" field is red flag, and may not be possible to point to the "Outbound Status" field".
     Any suggestions?    Thank-You.

Bill,
2 questions here,
1. Are alerts also triggered for outbound errors?
Am not very sure but if i remember correct ,in one of our scenarios when there was an error in SM58 while posting the Idoc ( error on outbound side in MONI ) no alert was triggered. I dont have any access to a server where alerts are working and so would just like to confirm if alerts are triggered also for Outbound side errors or are they triggered only for inbound errors?
2. If they are triggered for both, then wouldnt selectin NO RESTRICTION in where did the error occur suffice?
Regards
Bhavesh
Message was edited by:
        Bhavesh Kantilal

Delete XML Message permanently (SXMB_MONI) = empty

Hi all,
Could you help me how to delete all the xml message so my table become empty, no more message
in SXMB_MONI. because i already try execute RSXMB_DELETE_MESSAGES, but the xml message still there.
Thank you
Fernand

Fernand ,
Not all messages were deleted cause the retention period might not have expired for those messages.
See the following SAP Note 872388 for Deletion of XML Messages.
Regards,
Sumit

Reprocessing of XML Messages with status 003 i.e. Successfully Processed in

Hello Expets ,
I have to reprocess the XML messages which are already in successfully processed state ( 003 ) in ECC without posting the data due to some abap bug how am i going to do it.
Is there any way i can changes the status of the xml message to Manual restart possible or some other way to do it...!
Thanks in Advance

HI,
It's possible with some config change. (Hope your system is not production)
First solution:
The specified item was not found.
Second:
Insert the payload in RWB using test tab and send the data again

PI 7.1 XML messages are not getting archived.

Hi Experts,
Currently I am wotking with PI 7.1. I am trying to archive PI messages from PI Production server,and also maintianed the following parameters in SXMB_ADM.
ARCHIVE PERSIST_DURATION ASYNC 1 1
DELETION PERSIST_DURATION ASYNC 1 1
DELETION PERSIST_DURATION HISTORY 7 30
DELETION PERSIST_DURATION SYNC 2 0
DELETION PERSIST_DURATION_ERROR SYNC 3 1
Retention period
Retention Period for Asynchronous XML message in the Database
XML Messages Without Errors Awaiting Deletion 1
XML Messages Without Errors Awaiting Archiving 1
Retention Period for Synchronous XML message in the Database
XML Messages with Errors Awaiting Deletion 3
XML Messages Without Errors Awaiting Deletion 2
Retention Period for History Entries in the Database
History Entries for Deleted XML Messages 7
Messages are not getting archived.
When I execute the report "RSXMB_SHOW_REORG_STATUS"
I am geting the following output.
Msgs not in retention period (can be archived): 0
Msgs in retention period (cannot be archived): 88
Kindly suggest me what changes can be done so that PI messages will get archived from PI production server.
Regards
Naveen

Hi,
Please refer this thread.
[Deleting XML messages, database growing|Deleting XML messages, database growing]
Suresh

Deleting XI Messages - Abap dump in Delete job

Hi all,
I would like to know if we could directly delete xml messages without archiving. We are working on a sandbox system.
I tried to schedule a delete job ARCDEL_Delete_20080612115401 / 11540100.
It cancelled giving an abap dump CALL_FUNCTION_NOT_FOUND.
the abap dump is as follows:
    The function module " " is called,
    but cannot be found in the library.
    Error in the ABAP Application Program
    The current ABAP program "ARCDEL_DELETE_PARA" had to be terminated because it
     has
    come across a statement that unfortunately cannot be executed.
Any idea why a function module with no name is called?
Thank you.
Regards,
Raghavan

Hi Raghvan,
There are few ABAP report for that
RSXMB_DELETE_MESSAGES
RSXMB_DELETE_ARCHIVED_MESSAGES
check this blog for reference :
/people/gourav.khare2/blog/2007/12/21/mass-cancellation-of-error-messages--xi
Sachin

Delete Successfull Message but error or schedule status in outbound ?

Hi XI Expert,
I have problem to delete the xml message with status Processed Sucessfully but got error / schedule status in outbound message. I can cancel this type of message, so this message will be persistent forever in my database.
could you advise how to cancel this message so the deletion job will remove automatically.
Thank you and Best Regards
Fernand

Hi All,
I already set PESIST_DURATION for DELETION and also running RSXMB_DELETE_MESSAGES.
but then those message with Status = Success but having error / schedule status still in database, i can't even cancel the message.
so any idea how to cancel or delete this type of message.
Best Regards
Fernand

XML Message is status scheduled on R/3 side

Hi All
While trying to send message via outbound ABAP proxy i am getting my XML message in status "scheduled (commit work follows)" on R/3 side ... My queues are also registered .. I tested the HTTP connection to XI server also and it seems fine .. wonder why still no messages are appearing on XI system ?
Please provide help ?
Thanks

To register queues;
TCODE SXMB_ADM -> Manage Queues -> Register the Queues.
you can also run the report RSXMB_REGISTER_QUEUES

CcBPM: Message outbound status, Message being sent

Hi
I have a message with status flag message being sent at the outbound status PE since 30 days. Because of this message many messages got blocked with scheduled on outbound side status.
I tried to delete work items related to the message in SWWL, but i am not able delete.
Please suggest solution
Regards
Subba Rao

Hi velidi subba rao,
Please go to SMQ2 and right click on the entry and Select Save to LUW. It saves it to SMQ3. You will be able to reprocess it from there.
Give it a try and let me know if it worked. Also just release the queues once you have saved the message that is stuck.
Regards,
Jannus Botha

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Possibility to transfer additional parameters in outbound XML message

Hi,
is there any possibility to transfer additional parameters in outbound XML message using (BADI: BBP_SAPXML1_OUT_BADI).
Additional parameters are,
1. Communication Method for the Business Partner
2. R/3 Vendor # & logical system for Business Partner
3. Relationship between Business Partner Number and R/3 Vendor Number is BP GUID.
How can we extended the structure in the BADI.
Please give me qucik response.
Thanks & Regards.
Surya

Look for structure which the interface parameters are referring, there you should see some dummy structures referring to INCL_EEW* for e.g. in PO header INCL_EEW_PD_HEADER_SSF_PO. Add additional fields and pass the data accordingly.
Regards, IA

Archiving and Deleting of XML Messages in SAP NetWeaver PI 7.31 single stack

Hello my XI friends!
Need step by Step Guide to Archiving
and Deleting of XML Messages in
SAP NetWeaver PI 7.31 single stack
Similar to these instructions
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?quicklink=index&overridelayout=true
Regards,
Rinaz

Please check the below blog for archiving java only-(XMLDAS)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2011/11/16/aae-archiving-in-sap-pi-711-with-xmldas
For deletion there is standard delete job..
https://help.sap.com/saphelp_nw73ehp1/helpdata/en/48/b2e0036b156ff4e10000000a42189b/frameset.htm
Message was edited by: Hareesh Gampa

Outbound Proxy - No XML message seen !!!!!!!!!!

Hi All
I am trying to use outbound ABAP proxy from an R/3 system . I have written a Z program to triger the execute_asynchronous method of the proxy generated. Now when i go to see the SXMB_MONI txn to see any XML message flow i dont see anything .
Any pointers so to what need to be perfect to see a XML message is the monitor for an outbound proxy??
Thanks in advance for your help
rohan

Hi,
Generally the message goes in the schedule mode when the target system is not available or the connection to target system is broken. Pl check the target system.
You can use this weblog as checklist.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Thanks,
Prateek
Message was edited by: Prateek Shah

XML Messages in "Scheduled" status

Hi all,
The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restart the "Scheduled" message, there will be an entry in READY status at inbound queue and we have to unlock the queue. After that, the message will be processed successfully.
Here are my questions:
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Thanks in advance.

Donald,
Here are the answers to ur questions.
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
Some times the queues get stuck for various reasons. one msg will cause bottleneck for all other msgs behind it. there is no proper reason why this happens, however if it happens regularly then u will have to give it a thought.
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
Well, if the msgs r in the scheduled state then NO.
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Manual restart is not the best way to handle msgs bcause you might loose track/ some msgs might error out together causing issues. (that has happend to us). its tough to keep track if that is the case and if its critical from business point of view.
If it is going out of R/3 then may be you can configure jobs to push the data periodically.
Regards,
Pavan

Deleting old messages problem (adapter status 001)

Hi,
I am trying to delete old messages, and some of them are staying in system. Here is the result of 'RSXMB_SHOW_STATUS' report:
Message Status
Message Status:      003 Number:             85.274
Adapter Status of Messages with Message Status:              003
Adapter Status:      000 Number:              4.040
Adapter Status:      001 Number:             74.290
Adapter Status:      002 Number:                  0
Adapter Status:      003 Number:                  0
Adapter Status:      004 Number:                  0
Adapter Status:      005 Number:                  0
Adapter Status:      006 Number:              4.806
Adapter Status:      007 Number:              2.122
Adapter Status:      008 Number:                  6
Adapter Status:      009 Number:                  0
Adapter Status:      010 Number:                  0
Adapter Status >     010 Number:                  0
So, there is 74.290 messages whith 001 status in adapter. Archieve and delete jobs don't want to delete them, and status isn't going to change. Refreshing adapter status did help with most of messages but 74.290 is what still there after refresh. Any ideas how to bring them to final state or may be its possible delete them in this state?

Hi,
    Above Messages are related to your IDoc and BPM related interfaces...
so you need to schedule a report which does the deletion of the same...
Check the reports scheduled are running or not...
I dont remeber the reports which does the job of changing the status...
HTH
Rajesh

Outbound status to delete XML messages in PI

Similar Messages

Maybe you are looking for