Outbound with and with out message control

hai All,
In Out bound process when to go with message control and when to go with direct(without message control)?
thanks in advance
Praveen

Hi,
There are two ways to trigger an outbound idoc, 1. thru message control
and 2. without a message control.
Message control comes into picture if the application document is controlled by a output type.
Suppose a purchase order is created, then to send the purchase order to vendor, with the help of output type, the idoc will be triggered. This output type along with message type will be configured in Partner profiles.
Without message control comes into picture if its a master data like Customer master r Material master. U can use BD10,BD11 etc.,
Regards
Kannaiah

Similar Messages

Message control vs with out message control

tell me the differenece between message control and without message control.

Message control and output type. In R/3, message control is a mechanism by which documents are output based on certain selection criteria, requirements, and sequences. Message control determines the type of document, its timing, number, and medium (print, fax, ALE, or EDI.). Outbound messages in SD (Sales and Distribution) and MM (Materials Management, Purchasing) are created and processed by message control records. The output records are stored in the NAST table.
Message control uses the condition technique. The conditions for creating an output message are stored in condition tables that have selection fields picked from a catalog of application fields/tables. To determine if an application document qualifies for output, search strategies are used through access sequences, output procedures, and requirements. Once a message qualifies for output, message control modules use the parameters set in the condition type or output type to determine the timing of transmission and the medium of the message. The output type also specifies the program or module to be invoked to create the output.
Message/output determinations are concepts applicable not only to EDI and ALE, but also to other output mediums.

File to file with out message mapping and using variable substitution

Hi,
Can any one send me a scenario where we can have file to file scenario with out message mapping and where i can use variable substitution.
As of now i am using integrate configurations where i cant use variable substitution as the message does not reflect in integration engine. I need to populate time stamp between <filename><timestamp>.txt.pgp
I am as of now using configuration scenario.
The time stamp always writes before the last file extension.
Let me know your thoughts?
Thanks,
Chandra.

Hi Chandra,
u can use the Variable substitution even without IR contents also(Mapping....).
in the receiver communication channel just specify the path u want to access for a value...
eg: filename payload:mt_name,1,records,1,name,1
and in th file name give it as %filename%.txt... or vt ever ur requirement
Babu

My ipad touch screen not,also reseted it. It stops suddenly and goes out of control. Need answer very quickly

My ipad touch screen not,also reseted it. It stops suddenly and goes out of control. Need answer very quickly???????

Try doing a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.
If that does not help, take the iPad to an Apple store genius bar and have the techs check out the screen to see if there is a hardware fault.

Inbound IDOC error :51 Passed with out Message Type to ALE Layer

Hi,
I am struct wtih the inbound IDOC scenario ..XI able to send IDOC but at ECC side it is in 51 red status and the error message is
"IDOC passed without Message type to ALE Layer"
Do I need to pass these segment values in Message Mapping? I didnt mapped any MESTYP,SNDPOR,SNDPRT and so on.. disabled these fields...
Could any one light on this issue?
Thanks
Rajeev

>
rajeev raj wrote:
> Hi,
>
> I am passing values in MM as below:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <ZPORDCR01>
> <IDOC BEGIN="Constant">
> <EDI_DC40 SEMENT="Constant">
> <TABNAM>Constant</TABNAM>
> <DIRECT>Constant</DIRECT>
> <IDOCTYP>ZOrders</IDOCTYP>
> <CIMTYP>Constant</CIMTYP>
> <MESTYP>Z_Orders</MESTYP>
> <SNDPOR>B0009</SNDPOR>
> <SNDPRT>LS</SNDPRT>
> <SNDPFC>LS</SNDPFC>
> <SNDPRN>PD_100</SNDPRN>
> <RCVPOR>DEV</RCVPOR>
> <RCVPRT>LS</RCVPRT>
> <RCVPRN>Dev10</RCVPRN>
> <REFINT>GB</REFINT>
> <REFGRP>MTI</REFGRP>
> <REFMES></REFMES>
> <ARCKEY>20090909</ARCKEY>
> </EDI_DC40>
> <E1PORDCR SEGMENT="Constant">
>
> I am forwarding these values in MM... IDOC is successfully reaching in ECC but with 51 error in red... Logical system, post and message types are avaliable in Control record of the IDOC which received wiht errors in ECC.
>
> Thnaks
> Rajeev
Fill the TABNAME as EDI_DC40 and Direct as 2 (represents the inbound direction) and resend the idoc and check
Rajesh

IMac 20" G5 (gen1) with out of control fans

My iMac's fans are running at speeds that are driving me and my office mate completely out of our minds. Currently, terminal reports:
"location" = "System Fan" | | | | "target-value" = 1240 | | | | "location" = "CPU fan"
| | | | "target-value" = 4343
| | | "location" = "Hard Drive"
| | | "target-value" = 1800
| | | "location" = "sysclk slew"
| | | "target-value" = 1
The CPU is running at an average load of 26.1% and is at 144.3 degrees, with no out of control processes, and the hard drive is at 125.6 degrees. That's with only 5 applications running.
I'm running OS 10.4.3 and the iMac has 2 gigs of RAM. I've run the Apple Hardware Test disk, which reported no problems, and have run an overnight memory test, which also reported no problems and have reverted back to the Apple supplied memory with no positive effect.
I've also (several times):
reset the SMU (PMU for older Mac fans)
cleared the PRAM
run disk utility
repaired the permissions
done a clean software install
Nothing has worked. This is all on a computer whose firewire didn't work out of the box and which I repaired with a refurbed motherboard when it was less than a week old. Nothing like buying a new machine and getting a refurbished one to start you off on the right foot.
Now I'm trying to get this computer, which is under warranty, repaired but can't even find a number that I can call where I won't get charged! I live in Maine, so taking it to an Apple Store, or even a convenient service center is out of the question. Can someone advise?
This has been, without a doubt, my most disappointing Apple experience ever (and I owned a Mac Portable!)

Timothy,
I'm certainly open to another member's disagreement on this, but It appears to me that you have done everything necessary to disqualify software as the cause of your fan issue.
In that case, it's probably worth it to you to go ahead and give Apple your credit card to enable phone support for this issue, as it appears likely to be hardware related, which will cost you nothing (they should only charge you if it turns out to be a software issue.
Phone support will go down a list of things that you need to do to disqualify software, all of which, I believe, you've already tried. The only risk would be if phone support comes up with a software fix that no one on this board thinks to recommend to you. However, on the bright side, if no one on here can come up with another idea to try, and phone support has one that does work, it's going to be worth the cost, what is it - $75, I think?
I suppose your alternatives would be to:
1. buy some books or an AppleCare repair course and become an expert,
or
2. buy AppleCare and get free phone support back for both software and hardware for another two+ years, as well as valuable rights to in-home repairs.
If you have seen your iMac run well at times, and can see keeping it, AppleCare at $169 could be a bargain for what you might get out of it in phone support alone, not to mention another expensive part replacement a year from now. Furthermore, there are times it can be found at a lower price on eBay, usually a bit under $100 delivered. I have bought several, for this one I'm using, for a 17" that I sold, plus as a gift for a relative's iMac.
Best of luck.

Blank screen and time out message when connecting to EC2 via Putty

successfully installed SP 09 trial version on EC2. when trying to connect to the instance via Putty following all the proper steps in the Guide, after upload of PPK file, all I get is a black screen with "the session time out" message in 10-15 sec.
HELP !!!!!- researched everything, trying using elastic fox to ovoid conversion of pem file into ppk . same story there.

Hello Vynga,
Thank you for your quick reply.
Yesterday, I went to the store and bought the exact same cable I used at my friend's place. And voilá, it works perfectly with my monitor. Nontheless, i am still concerned. Although the image and sound are both perfect at the moment, it doesn't seem right that my computer should only work with 1 out of 4 cables. I'm pretty sure something is wrong there.
And yes, I did check the HDMI port for damage. If something is wrong with it, I cant see it. Also, if the port is damaged, I don't understand why it would work perfectly with one of the cables.
Sincerely,
Sebastian

Mouse pointer and keyboard out of control

The mouse pointer and keyboard can not control. Only powe button can use.
The system is still running. The clock and battery indicator is still working
how to solve?

Not a solution, I'm afraid, just concurring -- I am experiencing a very similar problem with the keyboard, but not the mouse pointer. I get an intermittent temporary freeze lasting maybe ten seconds, after which it recovers. Although I suspect waking the machine from sleep may set these off, I couldn't swear to it, and I have experienced several of these sequentially, maybe five minutes apart.

How to Integrating applications with full message control

Hi All,
I have a scenario where in I have to access three different Application databases and integrate them.
I have some Business validations to be performed on the Application Tables of the three.
I need some control of the message. This is Integration should choose a sender based on the data in a Tag
Questions:
1) Should I have to go for an integration process?
2) Can I retrieve data from a tag from the outbound interface? How to do that?
3) Can I call a synchronous Jdbc adapter from the process, get the response and based on that take a decision? Which step will help me to call an adapter?
Please help me with some of your suggestions and ways to proceed.
Regards,
Meher

Hi Meher,
>>>>Should I have to go for an integration process?
Yes
>>>>Can I retrieve data from a tag from the outbound interface?
Yes, of course
>>>>How to do that?
With a mapping
>>>>Can I call a synchronous Jdbc adapter from the process, get the response and based on that take a decision?
Yes
>>>>Which step will help me to call an adapter?
A send step
Regards,
Udo

Trying to install flash player 9 with out activeX controll???

i deleted something to do with xp and now i got no flash player and no activeX controll and my internet is running with add ons disabled and i cnt turn it back on.....so how do i download flash player 9???????????

It's very difficult to help you when we don't know exactly what you did / deleted.
If you deleted something that is part of Windows, then you can try to run the System File Checker
Start -> Run -> type sfc /scannow [Enter]
This will replace all missing or corrupt system files; you will need your Windows install disk for this.
Another thing you can try is a System Restore to a date before your problem started.
Start -> Programs -> Accessories -> System Tools -> System Restore
Do you have any particular reason why you want to install the old version 9 of Flash Player? You can download it from this page (the installer you will need to run is flashplayer9r159_winax.exe).

CPU runs high and spikes out of control.

Since the last couple updates firefox 11 & 12 have been pushing my cpu through the roof up to 103 at times then going way down then up to 30 to 60 erratically. I tested all of my add ons and my extensions and it still does it with all of them disabled and in safe mode. I tried changing the about:config-
browser.sessionstore.interval - The default value is 10000. Change it to 30000.
I installed Flashblock. I emptied the cache. I don't know what else to do. It keeps revving up my MBP and it gets so hot I smell it. I tested a few sites to see what makes it spike and Laist.com is one that it happens to I don't know why. Sometimes it won't even do it. I hate to abandon firefox but I don't want it to ruin my computer. Please any suggestions to why this is happening
Thanks

If you create a new profile, open Firefox using that, don't make changes but just test surfing, does it still happen?
[[Managing profiles]]
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].

Faces change names and mixes out of control

Hi!
I have 100+ detected faces and just realized that some of them had disappeared.
Example of problem: A is gone, but found her faces combined with B´s.
When trying to manually correct some of the images the problem escalated from 3 and now involves 7 persons which have been mixed.
If I for example found a picture with A and changed only that faces name from B to A, then all of A´s and B´s pictures get combined under A´s name.
Btw, I just upgraded to Mountain Lion and the problem persisted..
It is a bit frustrating when I think of all the work I put into organizing them in the first place.
Thankful for any help
/Erik

If you create a new profile, open Firefox using that, don't make changes but just test surfing, does it still happen?
[[Managing profiles]]
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].

What is message control?

Hi all,
What is message control? esp in Idocs..... Any docs links on Message control?
Thanks,
Charles.

hi,
Message control
Application like PO(purchase order) creation use this technique , where the output type is linked to the application(Message control is a configurable cross application component which can be set in IMG .Such programs are created in the form of function modules and linked to the output type which is linked to the apllication.These have predefined interfaces.
In outbound programs(function module) that use message control the key of the
application document is passed to the function module whcig will read the data from the table depending upon the key passed(NAST structure) and fill the IDOC segemnts with the application data.The control record is also passed to the function module but is not fully filled, the rmaining fields are filled and the control is passed back to the calling program which is RSNASTED and is invoked by the
message control to process ALE and EDI output types and this program on recieving the IDOC data will create the physical IDOC in the system.
The parameteers passed to the function module are
IMPORTING PARAMETERS
OBJECT LIKE NAST
It contains documents key.
CONTROL_RECORD_IN LIKE EDIDC
It contains the partailly filled control record
EXPORETING PARAMETER
OBJECT_TYPE
CONTROL_RECORD_OUT LIKE EDIDC
TABLES
INT_EDID LIKE EDIDD
The internal table used to fill the data records in the same order as they exists in
the IDOC.
The important parameters that should be filled in the custom function module are
CONTROL_RECORD_OUT and INT_EDIDD .The OBJK field of the structue NAST contains the key of the apllication document.
===========================================
Message control and output type. In R/3, message control is a mechanism by which documents are output based on certain selection criteria, requirements, and sequences. Message control determines the type of document, its timing, number, and medium (print, fax, ALE, or EDI.). Outbound messages in SD (Sales and Distribution) and MM (Materials Management, Purchasing) are created and processed by message control records. The output records are stored in the NAST table.
Message control uses the condition technique. The conditions for creating an output message are stored in condition tables that have selection fields picked from a catalog of application fields/tables. To determine if an application document qualifies for output, search strategies are used through access sequences, output procedures, and requirements. Once a message qualifies for output, message control modules use the parameters set in the condition type or output type to determine the timing of transmission and the medium of the message. The output type also specifies the program or module to be invoked to create the output.
Message/output determinations are concepts applicable not only to EDI and ALE, but also to other output mediums.
~~Guduri

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud Connection

Hi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Outbound with and with out message control

Similar Messages

Maybe you are looking for