Outdated documentation

Why is it that the only documentation I can find on migrating Access DB to APEX is outdated? I'm using MS Access 2007, migrating to Oracle 11g and the latest version of APEX.
The doco that I have (updated June 2009) refers to security settings in Access which are no longer available on MS Access 2007. Also refers to using menu items which are no longer available in Access 2007 as it uses ribbons and the Access Options (which are terrible) and require so much more investigation to get the same outcome. I don't want to have to do this as it compromises what I am doing due to it not being 'in the instructions'.
This has caused me a great deal of time (and grief). Is there any documentation out there on the migration process which is up to date?
Also, the Quick Tour viewlet for APEX freezes up after about 30sec.
Edited by: user12516924 on 27/01/2010 15:11

The latest version is 2015-01. All or most of features works with starting version 2013-08.
Version in documentation indicates that minimum version required for working that feature. Hence, all documentation is pointing to 2013-08.
You should do the URL encoding before making http request. Otherwise special characters such as blanks and punctuation are passed in an HTTP stream without encoding, they might be misinterpreted. Hence your request failed due to space. You can use the following
method to do the URL encoding.
https://msdn.microsoft.com/en-us/library/4fkewx0t%28v=vs.110%29.aspx
Yes, REST API is fully supported. May be there could be few gaps or bugs. We are putting constant efforts to fix all bugs as we find and improve it further.
Thanks,
Sateesh
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

Similar Messages

GRCI documentation

Hi,
How can we get the GRCI i=Implementation guide and GRCI Users guide?
So far, the only GRCI docs I can get are the ones related to EBS R12 (from eDelivery) which is linked to ICM, but I'm looking to the new one linked to GRC Manager (old Stellent product).
Thanks a lot for your Support,
Christian MEYER

Please note that the link above contains outdated documentation for GRCC product and does not contain any documentation for GRCI product.
For GRCI documentation, see the following link:
http://www.oracle.com/technology/documentation/grci.html
For GRCC documentation, see the following link:
http://www.oracle.com/technology/documentation/logicalapps.html
Regards,
Sharvil

Code Signing Cert for AIR and MSI

If a Code Signing Certificate for AIR is purchased, can that same certificate be used when distributing the package using MSI?
Or does it not matter as long as the AIR app is signed?

No, this was a different problem that created similar symptoms.
I just found out that, since Director 11.5, we can put the Xtras folder inside a projector. I was relying on outdated documentation, both online and in my mind, which said the xtras had to be next to the projector.
Weirdly, putting the Xtras folder inside the Contents folder (inside the bare stub projector) solved the problem I was having: my sound was not functioning after I code signed the xtra that enables sound. Now it works fine.
I also created an error when my projector's INI file set Movie01 to a Director movie in the same folder as the projector. Now I have it instead point to a movie in the Resources folder of the projector. So maybe I will just throw all my movies and supporting files in the Resources folder.
I too am thinking of documenting the process, once I know customers are buying my app and using it successfully. Maybe I'll use screen recording to create a set of YouTube tutorials. That can spare others from this confusion and aggravation, and encourage people to buy the latest version of Director and update their old products. The more money that Adobe earns from Director, the more they will be encouraged to invest in developing Director further.
If Apple will accept apps without receipt validation, that will certainly simplify things. I saw an Apple web page that stated it was mandatory, but that page has been changed. Maybe validation is optional but no longer required.
For details, check this:
https://developer.apple.com/library/mac/releasenotes/General/ValidateAppStoreReceipt/Intro duction.html
but luckily there is source code out there that can be used to handle those technical details.
I'm wondering how you applied your set of icons to your bare stub projector. Did you simply replace the projector.icns file? I created an error when I tried that.

Applescript to get the current insertion point of the cursor

How do I use Applescript to get the current insertion point of the cursor in a Apple pages.app document?

Oops, missed that one - you are correct, the line should be:
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">set {TheStart, TheEnd} to character range of the selection</pre>
I have a wrapper script that I use to insert stuff from my handler/code library into a Script Editor document, and was adapting snippets from that for my examples - I guess that one got away.
As for the dictionary, some applications just have poorly written or outdated documentation. Some of the items have multiple entries (eg, there may be a selection object for the application and also for the document), and some inherit properties from other items. Some are used as nouns, others as verbs (or both). Sometimes it is easier to visualize the item by keeping track of it's reference - the 'some property of document 1 of the current application' thing. You can use the Script Editor's Event Log to see the results of various properties and commands - for example, the above script will result in the following entry (your numbers will vary depending on the selected text):
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell current application
get character range of selection
{50, 50}
end tell
</pre>
You can also use the 'log' statement (eg, 'log MyVariable') to add your own entries into the log instead of using dialog boxes.

Callable object "input" is missing

Hi,
I am using some guides to learn to use block in Composite Application Framework.
I have a SAP Portal 2004s SP10.
I am using some guides I found on CAF Tutorial Center, in particular Designing a Block and Using Parallel Dynamic Block and Dynamic User Assignment.
Quite often in those guides it is asked to use a callable object called Input under the type Data Forms, but in my portal there is nothing with this name, the more similar is a callable object called Data input form, but it is no possible to insert input in it, so I cannot complete the tutorial.
Someone can help me, telling me if there is an alternative valid callable object, or if I have to install some other component?
Thank you
Giuseppe Pagnotta

Hi,
Most probably you're using an outdated documentation, as the Callable Object of type "Input" has been removed from recent releases.
Regarding the issue, you can most probably use Data Input Form or Web Dynpro Form instead of "Input" in this case.
OR
you can use Visual Composer to create the UI and use CO of type "Portal iView or Page" to integrate it into a Process.
You can find more information on Visual Composer here: https://www.sdn.sap.com/irj/sdn/visualcomposer
Hope this helps,
Ashutosh

Gimp Printing Problems

I just installed the latest version of the GIMP on Tiger (10.4.7) and I cannot get anything to print on my Epson Stylus Photo 820 injek printer.
I selected the right printer model in the setup panel, and have tried all the permuations of the options, but nothing works.
Has anyone had any success with printing out of the GIMP?

Geesus...what a f#$%'n pain in the butt....
The only way I got the GIMP to print on a 10.4.7 intel-iMac was to download Gutenprint v5.0, ignore the outdated documentation (which points to the app Print Center on Jaguar) and figure out how to install Epson SP-820 with the CUPS+Gutenprint version of the Epson driver.
You MUST install the CUPS+Gutenprint driver for this to work (using the printer model drop-down list).
FYI: installing the drivers from support.epson.com for Mac-for-Intel does NOT work with the GIMP.

Single dispatcher servlet? What's the benefit?

Greetings,
Just out of curiosity: I've written the setup for a web application using
several techniques:
1) Using Spring, where a central dispatcher servlets invokes a bunch
of 'Controllers' to which the servlet functionality is delegated.
2) Using just servlets (more than one) which take care of the incoming
requests according to their mappings.
3) My home-brew dispatcher servlet that dispatches to my home-brew
controllers (just an interface of course).
Just color me stupid, but I still can't see the benefit of one over the other.
Anyone care to enlighten me?
kind regards,
Jos
ps. of course Spring takes care of a lot of other useful things but it's
just that single/multilple servlet mechanism that I'm wondering about.

Thank you very much for your answer. It fits my conclusion (so I like
your answer a lot ;-) that it simply doesn't matter.
I am just a beginner w.r.t. all those servlets/jsps etc. so I was just
wondering.Jos, are you injecting your controllers into your servlets? Yep, for my single 'main' servlet, the 'main-servlet.xml' file defines the
url -> controller mappings.
Are you loading the Spring web context using the ContextListener?
You want the Spring contexts to be loaded before any of those servlets.I just checked: yes I did; just by accident though because I grabbed that
part from some examples I read in "Pro Spring" and "Spring in Action" ;-)
I can think of one advantage - multiple servlets are under the control
of the container lifecycle. If you have just one servlet and multiple
controllers, the controllers have their lifecycle handled by the GC.
Wait - if those controllers are Spring singletons, they won't be GC'd.
I'm killing my own argument.I'm not using my controllers as singletons because (nitpicky as I am)
I don't want these controllers around when they are not in use but take
up 'precious' memory ;-)
iow: I delegate the real work from those controllers mentioned in that
xml file to my controllers again.
Don't you have to embed the individual servlet URL for the HTTP
POST into each page that way? A single servlet for all JSP POSTs
makes it easier to change navigation parameters.Well, sort of, because I do have to define several SimpleFormControllers
and keep track of them when those url -> controller mappings are
injected in the servlet. IMHO it just moves that little burden to some other
place ;-)
Spring Web Flow has a state machine that allows more complex
page navigations. That might be useful.I haven't used it yet because I was under the impression that it wasn't
finished and released yet; hm, outdated documentation again. I'll check
it out.
Personally, I like the single controller servlet. Before I learned about
Spring I wrote one for myself that used XML to control navigation. I
read it in using the init() method.Exactly what I did (see my OP). I think the mechanism is cute and given
the way Spring does its job, it's the way to go: you can't just stuff all this
injection stuff in web.xml so defining a single dispatcher servlet and its
single <servlet>-servlet.xml file is the cleanes way to go.
But when I look at my multiple servlet configuration it's just as clean, so
I couldn't (and still can't) see the benefits of one way over the other.
My next question would've been: what's all that 'notational benefit' all
about w.r.t to jsp 2.0, jstl and the expression language? (EL). I find it
a bit of a burden personally because it introduces just another
notation on top of nothing else. Maybe I haven't seen the light yet
I really like JSTL a lot. I like the "taggy" notation. I find that it keeps
scriptlets out of my pages and makes it harder to embed business
logic into pages. I find scriptlets very hard to read, worse to debug.
What's not to like?I think I'm in the other camp ;-) I do realize that those jsps are not for
complicated programming tasks; but then again, if they're not, I find that
scriptlet notation quite convenient: just Java all over the place and no
need to use all those different tags at all over the place. IMHO they hide
a bit to much for my personal taste, i.e. if something isn't present, (null),
it mufffles it away to an empty string. I find that a bit ...
PS - Stunning World Cup results. Wayne Rooney looked like a
hooligan. The only thing worse would have been kicking the referee
in the [email protected] I saw that; he was not being a good sportsman. IMHO it was a lousy
match again.
And how did France beat Brazil? Ronaldino didn't do anything the
entire tournament. What happened?I guess the French were just a bit better: France - Brazil 1 - 0. Nothing
Brazil could do about it ;-)
All European final. Amazing. I thought that Argentina or Brazil or both
would be there.Even more: all Western Europe countries in the (semi) finals. I suspect
that Brazil was a bit too popular and that fact made the players a bit
too self confident.
kind regards,
Jos

Will T7700 intel CPU work in a T61?

Will CPU work without any major upgrades? Also, what is the max mem RAM
alllowed in T61? Seller is telling me only 3gb but web says upto 6(?)
Thanks all!
Solved!
Go to Solution.

Welcome to the Forum!
yes, T7700 (2.4GHZ) CPU is a Merom processor and compatible with any T61 or T61p. If you encounter a blank screen upon installing the T7700 CPU, then you may need to update your BIOS. However, I would not recommend updating BIOS unless absolutely necessary as a failed BIOS update can brick your computer.
As for maximum memory, T61 can definitely take 2x 4GB= 8GB total DDR2 RAM despite the outdated documentation, (see here for example), which may lead some to believe it is limited to 6GB or 4GB. If you install a 32-bit operating system you will be limited to a little over 3GB. You will need a 64-bit operating system to access the full 8GB.
Have a great day. (I do not work for Lenovo)

Cannot create collection or query assets...

I'm trying to create Collection and Query assets but having no luck. I've gone in as site admin and enabled both assets...giving them "New" and "Find" in the start menu...but nothing. Is this a bug or is there another step required? Thanks! (This works fine with other assets)

As a small update...I can create a collection and query in the Contributor interface...but the documentation states being in the Admin interface. Perhaps this is just outdated documentation? The form for creating a new collection looks different in the documentation than the actual form I'm seeing. If anyone can confirm this I'd appreciate it!

No "Diagnostics Administration" in RCA workcenter

Hello,
SAP SOLUTION MANAGER 7.0 EHP 1 SP20
I'm using the RCA workcenter but there is no "Diagnostics Administration". Only "Diagnostics Setup" is usable.
Any ideas?
Thanks

Hello Patrick,
I think you might be using outdated documentation, in the past there were references to "Diagnostics Administration" before SP18 (EHP1).
Now the "Diagnostics Setup" (or quicklink http://<solman_host>:port/smd) is the diagnostics administration.
Best regards,
Guilherme Balbinot

Sun coding conventions for documentation are horribly outdated!

Seriously I have seen 10 different formats on searching that look way better and the fact the conventions on display from sun date to 1999 is very confusing.
Can I ask which is preferred (I am doing the SCJD and here is an example of format vs format)....
For beginning class comments.
* @(#)Contractor.java
* Version 1.0.0
* Date 27/03/2009
*/vs
* @(#)Contractor.java    Version 1.0.0    Date 27/03/2009
Methods
* Sets the record number for the Contractor record.
* @param recNo A <code>Integer</code> containing the record number to be
* set.
*/vs
* Sets the record number for the Contractor record.
* @param recNo     A <code>Integer</code> containing the record number to be set.
*/Edited by: Yucca on Apr 5, 2009 7:12 PM
Edited by: Yucca on Apr 5, 2009 7:14 PM
Edited by: Yucca on Apr 5, 2009 7:17 PM

* Returns an Image object that can then be painted on the screen.
* The url argument must specify an absolute {@link URL}. The name
* argument is a specifier that is relative to the url argument.
* <p>
* This method always returns immediately, whether or not the
* image exists. When this applet attempts to draw the image on
* the screen, the data will be loaded. The graphics primitives
* that draw the image will incrementally paint on the screen.
* @param url an absolute URL giving the base location of the image
* @param name the location of the image, relative to the url argument
* @return      the image at the specified URL
* @see         Image
public Image getImage(URL url, String name) {
     try {
         return getImage(new URL(url, name));
     } catch (MalformedURLException e) {
         return null;
}This was taken from... [http://java.sun.com/j2se/javadoc/writingdoccomments/#format]
And this...
     * ...method doSomethingElse documentation comment...
     * @param someParam description
    public void doSomethingElse(Object someParam) {
        // ...implementation goes here...
    }from [http://java.sun.com/docs/codeconv/html/CodeConvTOC.doc.html] Notice how the @param docs differ and both are from sun! So Jwentling Mr. know it all which one must I follow? And this is not THE ONLY ONE WHERE SUN contradict their own conventions, leaving people like me asking here! Go moan at them for not being precise.

Is "2013-08" the latest REST API version or is the documentation outdated?

I'm wondering if the Azure Notification Hubs REST API documentation is
still correct and up-to-date or if there is already a newer API version than "2013-08" that can be used.
All the single pages show "Updated: February 26, 2015", but I guess it was just a meta data update of all the pages, since the API version didn't change,
it's still "2013-08". Is this intentional because the API didn't change or was it forgotten to update the API version?
Here (and here)
is an example for the REST API usage from Elio Damaggio which uses "2013-10" as the api version. I tried all possible api version values in the format "yyyy-mm" from "2013-10" to "2015-03" and the following
were working: "2013-10", "2014-01", "2014-05", "2014-08", "2014-09", "2015-01". Are there actual changes to the API and if so, aren't they officially supported or what is the reason for the
old API version in the documentation?
Is the API version "2015-01" officially supported and can I find the documentation for it or am I stuck with API version "2013-08"? Or
aren't there any changes worth updating the documentation?
Moreover the documentation for "Read All Registrations of a Channel" states to use
following request URI, which doesn't work: https://{namespace}.servicebus.windows.net/{NotificationHub}/registrations/?$filter=DeviceToken eq ‘{deviceToken}’&api-version=2013-08
Even more confusing, the german version uses double quotes, which doesn't work either: https://{Namespace}.servicebus.windows.net/{Benachrichtigungshub}/registrations/?$filter=DeviceToken
eq "{Gerätetoken}"&api-version=2013-08
I found out that the correct request URI must be like this to work: https://{namespace}.servicebus.windows.net/{NotificationHub}/registrations/?$filter=DeviceToken+eq+'{deviceToken}'&api-version=2013-08 ,
so + instead of spaces and '' (apostrophe / straight single quote - U+0027) instead of ‘’ (single curved quotation marks - U+2018 and U+2019) or "" (straight double quote - U+0022), e.g. https://myServiceBusNamespace.servicebus.windows.net/myHub/registrations/?$filter=DeviceToken+eq+'2ED202AC08EA9033665E853A3DC8BC4C5E78F7A6CF8D55910DF230567037DCC4'&api-version=2013-08
Is the documentation just wrong by mistake or is it not up-to-date? How are people even using the REST API without a 100% correct documentation? Is
there something I am missing? Do you get a manual when you buy a Azure Notification Hubs subscription or is the REST API not even supported officially?

The latest version is 2015-01. All or most of features works with starting version 2013-08.
Version in documentation indicates that minimum version required for working that feature. Hence, all documentation is pointing to 2013-08.
You should do the URL encoding before making http request. Otherwise special characters such as blanks and punctuation are passed in an HTTP stream without encoding, they might be misinterpreted. Hence your request failed due to space. You can use the following
method to do the URL encoding.
https://msdn.microsoft.com/en-us/library/4fkewx0t%28v=vs.110%29.aspx
Yes, REST API is fully supported. May be there could be few gaps or bugs. We are putting constant efforts to fix all bugs as we find and improve it further.
Thanks,
Sateesh
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

Installation Documentation in 2.2.1 download outdated?

Greetings,
We downloaded the 2.2.1 zip for installation on our HP boxes, but after the installation, the GUI for editing the pages is missing all the icons associated with the Page Rendering / Page Processing / Shared Components, and thus nothing shows up except for those column headings on the Edit Page Screen. We went back over all the tasks from the installation guide, and all were done in the correct order. We then went back to the website, and the installation guide available for download for 2.2 is a NEWER release than the one included in the 2.2.1 zip. The one available for download is a revision 02 with a date of September 2006, while the one included in the zip is a revision 01 with a date of July 2006. This one is missing an entry in the Post Installation tasks that is included in the September 2006 version.
Most notably, the
Applying the PL/SQL Web Tookit Patch
(section 4.5) is missing from the July 2006 version. Could this be the problem with our installation?
Regardless, we just wanted to make you aware (if you arent already) that there was an earlier version of the installation guide being included in the 2.2.1 zip download.
BTW, our download date for this was 9/29 at about 8:00pm.
Thanks in Advance,
Clifford Moon
UTPA Webmaster.

Bump
Sorry for the lack of time between posts, but we are unable to administer any of our production applications. The problem with the lack of user interface still exists after applying the patch . Page Rendering / Page Processing / Shared Components still appear inside their boxes at the top of the page (below the menu bar, etc.), but there is no additional boxes (items/branches, etc) appearing below them, nor are the icons appearing in the boxes for the 3 columns.
Any help is greatly appreciated before we are forced to restore from the 2.0 version.
Thanks in Advance,
Cliff Moon

CAF GP documentation

Hello
Is there a documentation of CAF GP Design Tool?
I know
http://help.sap.com/saphelp_nw2004s/helpdata/en/fb/5e6f4169e25858e10000000a1550b0/content.htm
and
SAP Composite Application Framework - CAF Tutorial Center [original link is broken]
But unfortunatelly it doesn't explain all features of GP Design Tool. I need <b>full </b> reference documentation and not thousands of simple scenarios.

Try this link instead http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/984942da51690de10000000a155106/frameset.htm . It will looks similar to the link you provided from help.sap.com but if you click on Core Development tasks for example. You'll see more content from the link I provide you. Your link probably points to outdated content.

Why is ITS ignoring its' own documentation? explicit woes..

Hi all,
I need some help with submitting a feed into iTunes.
The feed in question is originating from an automatic server platform, which autogenerates both the audio content as well as the RSS feed. The problems are caused by the inability to manually edit the RSS. Let me explain.
The server platform hosts hundreds of podcast feeds, which all have exactly one kind of header. So far all the other podcasts have been "clean", ie. there has not been any need to supply an <explicit> tag. But now there is a new podcast that needs to be marked as "explicit". So how can I do this?
After studying the (apparently outdated) podcast authoring guideline documentation, it suggests that if <explicit> tags are omitted from the RSS, I can supply the explicit status info manually while submitting the feed into ITS. However this does not seem to be the case. When I try to submit the feed into ITS, it defaults for "explicit: clean" in the "submit a podcast" dialog even though it is supposed to let me specify this manually!!! What gives?
Any help would be really appreciated! Like mentioned above, I cannot edit the RSS code manually.
TIA

You can Opt out of verizon marketing - 866 483-9700
Also when logged into your own account on the home page, under your bill - is account actions . go there and click on account tools and then scroll down the list. in that list is an option on the right underneath privay policy called called Change Verizon Broadband Preferences -- Click that and you can change how and when you get email offers.

Outdated documentation

Similar Messages

Maybe you are looking for