Outdoor Wedding Theme - Intro Movie doesn't display

I applied the Outdoor Wedding Theme to my project and where the Intro Movie is supposed to play, I see only a black screen.
Adobe Premiere Elements 4.0
Windows Vista
HP Pavilion dv6985se
4GB RAM
Thanks!

In the Theme Customisation panel, have you checked ON the "Intro/Closing Movie" option.
This option is available under the "Theme Content" option.

Similar Messages

Rented movie doesn't display on iPad. Says PayPal purchases cannot be made on iPad

Very confused. Rented, downloaded, and paid for rental movie on iPad, but notice on iPad said PayPal purchases cannot be authorized from the iPad (weird... never happened before). Now on my computer in iTunes the purchase appears in recent purchases but no movie.... now what?

So on a final note on this issue, Apple called me back as promised however it was an automated message not the person I dealt with previously, so all they did really was to save me from dialing their number as I had to explain myself all over again.
They kept sending me "higher" to the next "senior" advisor who I thought would have more technical expertise than the one previous but this was not the case the last person I spoke basically told me (after making stupid excuses and trying to justify the issue because I was using "legacy" devices) that there was nothing he could do for me except to document the issue.
Thats's strike 1 Apple....2 more and you're out!!

Masked QT movie doesn't display correctly in Safari

I've only tested this in Safari so far, but here's my problem. I have a QuickTime video that I've letterboxed with black bars across the top and bottom. I applied a mask to get rid of the bars. The masked video plays perfectly in QuickTime Player. However, when I play it in Safari (embedded or just in its own window), there's a thin black bar on the left side and the right side looses a good 50 or more pixels, so my video looks off-center. If I take the mask off, it works fine. Any suggestions?
I think it may have something to do with the 720x480 vs. 640x480 thing (which I still don't fully understand. I tried creating a mask at 720x480 and still get the same problem.

Could you post a URL so we can check?
Rather than use a mask you could use an app like MPEG Streamclip (free) to "crop" the file.

Intro movie-clip

Hie,
i've created an intro under CSflash5 for my website, and i would like to export it into a movie clip, if you see what i mean.
Usually people create them intro movie clip and once inside begins to elaborate them intro, i just do the reverse, or rather, i just do the opposite.
thank you very much for your help !

you can't export a movieclip.
you can create a movieclip of your intro and you can copy that movieclip and you can paste that movieclip into another fla.

Windows Explorer doesn't display some files until I play or get info for them in iTunes.

Windows Explorer doesn't display some files until I play or get info for them in iTunes.
How do I get them to all show up in Explorer without playing them all one by one?

I think I solved the problem by going to File -> Library -> Organize Library

I need to open my iTunes playlists in a new iPad so I can play them outdoors at an outdoor wedding. How?

I built playlists for an outdoor wedding using my iTunes on my Windows laptop. I modified cross-fade and start/stop time of each song to create a flow. I need to open my iTunes account and have the playlists perfectly preserved with all the changes on a new iPad. Then I need to use that new iPad to play the music at the wedding, which is OUTDOORS. Is this possible? How?

Thank you. I am trying again to backup my catalog to my second hard drive. When I tried it before it would stop at 64% at which point I figured it was stuck and cancelled it. The third time I tried it I let it go for a day, and then it gave me an error message. Unfortunately, I was so frustrated I didn't write down or look up the error message, I just decided to copy in Windows instead - just so I would have a backup for my stuff. Currently it again seems to be stuck on 64% again. I will let it go and see if I eventually get an error message and then try to look that up and resolve it. If successful I will then reconnect with the method you shared with me - thank you!

The Video app in OS7 update doesn't display file names.

The Video app in OS7 doesn't display file names under the image.
How can I identify my video files without having to open each file to access the file name.
Is there something I am missing or is this just an omission in the OS7 upgrade.
I am a music teacher and this lack of file names makes the app virtually useless for use in the classroom.

Agreed. This has been a problem with TV Shows in the Videos app since forever, but at least it used to put the name under Movies. Now instead fixing it for TV Shows in iOS 7 they've done the opposite and made Movies fail the same way as TV Shows always have!
Apparently it still lists the title for Home Videos, so the best work around for now is probably to reclassify all your Movies as Home Videos. Sigh.
Apple's Videos app development team seem to be unaware that iTunes can store and play movies and TV shows that don't come from the iTunes Store, videos that don't have covers, and that need to display the names and other info from iTunes for them. They also seem to not understand that the default grid view for videos is totally inadequate for users with scores or hundreds of movies and TV shows that they home share to their iPads and iPhones from iTunes. The Videos app needs a list view at least, as well as a grid view.
All they have to do is look at how the Apple TV handles the same files and meta-data from iTunes and provide something similar for the iPad and iPhone. Why after all these years they still don't get that I have no idea.

SWF Doesn't Display

I'm redesigning a site with a SWF movie on the home page but the SWF doesn't display on the redesigned page. Original page displays fine. Same results on IE 7 & 8 and FF - that seems to rule out computer & browser errors. The only difference I see is new page is XHTML while the original is HTML - The code on the two pages is virtually identical except for that.
Redesigned site is http://www.bath-hancock.com/index.html
Original site is http://www.countryconnectionsva.com/index.htm, on a different host.
Live HTTP Headers shows everthing is being downloaded properly except http://www.bath-hancock.com/flash/CountryConnections.f4v and http://www.bath-hancock.com/SkinUnderAallNoFullNoCaption.swf get 404 errors - these files don't appear on the original site and I don't know what they are as I can't find any reference to them in the code for the new site.
Any suggestions would be greatly appreciated.
Thanks!

Thanks Murray,
Yes, I tried that but didn't know what to exect as I have never done that with a SWF before. I downloaded the
entire old site with DW, copied the files to the new directory, and then uploaded them with DW. I guess I'll repeat the process and see what happens.
Hmmm - I can play the one I initially downloaded in Flash but I get the following error when I try to play the copy:
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: file:///Macintosh%20HD/Users/laurenceheine/Sites/Country%20Connections/SkinUnderAllNoFull NoCaption.swf"]
Checking what was downloaded, I found three more files: SkinUnderAllNoFullNoCaption.swf, CountryConnections.f4v, and CountryConnections.flv. Copied those to the /flash directory and now the SWF plays on my computer in Flash. Uploaded them to the server and it plays w/o the skin (still get that 404 error). Moved the skin to root and it plays fine. Wonder why it plays ok in /flash on my computer but not on the server?
Only issue left is the white background - can I change that somewhere? (I don't do Flash so have no clue.)
Thanks again!
Larry

I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?

I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?

Perhaps someone on this forum has done what you are asking and would be more help than me.
I think it could be done, but you'd have to do some fiddling around. The concept is to make the iDVD theme part of your iDVD or iMovie created slideshow, so that it will play as part of the slideshow.
I don't know if this will work, but if I were experimenting I would try creating an iDVD project with just the theme in it, and then save that to your desktop as a disc image. When you click on the icon of the disc image you have just created, you will see a Video_TS folder. Open that and you will see a file containing the letters VOB. Open that file.
You need to convert that VOB file back to DV or Quicktime Movie which iMovie is designed to handle. For that you need the free download MPEG Streamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/, which I believe costs about $20.
Open MPEG Streamclip and drag the VOB file to its window. Go to the MPEG Streamclip file menu and click on Export to DV.
After the export is done, you will have a DV file containing the iDVD theme. I would try adding that clip as your first entry in your slide show, assuming that you are running iDVD7. (You can't add a movie to a slideshow in iDVD6.) When you play your slideshow hopefully it will play the DV clip containing the theme, then seamlessly followed by your slide show. If it doesn't, try instead exporting the VOB file to a Quicktime Movie, and then try to add the Quicktime movie to your slideshow.
You might be able to do this easier if you created your slideshow in iMovie instead of iDVD. You could make an iMovie with the iDVD theme clip as the lead clip, and then share your iMovie project to iDVD.
Good luck with this. As I said, perhaps someone else has an easier way to do this and will chime in.

XMP doesn't display proper info in Photoshop CS2 for Mac.

Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.

The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

Picasa Web albums: doesn't display all uploaded photos. This only happens on my desktop computer. All photos displayed on my laptop.

Not all of my uploaded photos display in my Picasa web album. All the photos upload, but 17 out of 90 photos don't display. Some are landscape, some are portrait. This is no pattern to what doesn't display (e.g., not every third photo). This only happens when I use my desktop computer. When I use my laptop, all uploaded Picasa web album photos display.

See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

In the iDVD window, there is a box in the lower left corner. When I scroll over it, I get the message to hide or show the intro movie. Checking or unchecking the box seems to do nothing. Can anyone explain?

Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner. Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie. I have checked and unchecked the box, but see nothing different in the project. Nor can I figure out what is meant by "intro movie." Can anyone explain?

Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
Here are ways to view and edit the background movie:
◼
Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
(If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
◼
Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

Not allowed to play movie, an external display is detected (Q1544)

I'm getting this message on my I-pad 2 while using my Uverse app
"Not allowed to play movie, an external display is detected (Q1544).
There is no problem using the Netflix app.

There isn't a workaround, if you get that message then the provider has blocked using Airplay or an external monitor. Contact Uverse and ask them to remove the block.

Running app doesn't display unicode chars

So far, i didn't care about character encodings. When i setup a string in java i just used my special characters, like e.g. the german umlauts:
String text = "�usserlich �berhaupt nicht sch�n."; //html: Äusserlich überhaupt nicht schön Then i changed the file encoding in my IDE (eclipse) to UTF-8. The first time i reloaded my source files, i had to replace my texts by retyping my special charaters in the source. I thought that would have been enough.
But now, such text doesn't display anymore in a Swing component like a JTextField - instead the special characters are replaced by weird (sometimes multiple) other characters.
The only workaround i've found so far is, to replace all special characters in my source code with the corresp�onding unicode code character "\uxxxx" (backslash + u + 4 chars). But then this would be a step back writing text in the source code. I thought it would be easier to use Unicode ...?

This post should be under iCloud on the Mac, not icloud.com. If any moderator can move it, that would be great.

.flv doesn't display in browers

Problem: progressive FLV doesn't display in browsers
This is what I did: 1) inserted flash video (about 5 MB and
encoded in Flash Video dEncoder CS3) into a DW page. 2)Saved and
checked that it plays correctly in DW preview. 3) uploaded page,.
FLV and required FLVPlayer_Progressive.swf to server. 4) Checked
with server; they allow progressive FLVs. 5) From Adobe.com I
downloaded and replaced FLVPlayer_Progressive.swf in my local
folder in case cross-scripting vulnerability=the culprit.
6)uploaded new FLVPlayer_Progressive.swf to server. Tried it at
root level and in folder analogous to local file. 7)Cleared
browsers' caches, histories. Refreshed page. 8) did all of this on
Mac OS10.4 and Windows XP (except #5 because Adobe site has 404
error on cross-scripting vulnerability link for Macs . Have
notified Adobe about 404 three times.)
URL:
http://www.digitalartsclub.jandove.com/pages/gallery/motion/jdove.html
Very frustrated, would appreciate any suggestions

<sigh>
Your page throws a javascript error when it loads - line 155.
Line 155 is
this -
AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0','widt h','360','height','240','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=Clear_Skin_1&streamName=../../../media/motionartists/dove-mnem&a utoPlay=false&autoRewind=false','quality','high','scale','noscale','name','FLVPlayer','sal ign','lt','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Vers ion=ShockwaveFlash','movie','FLVPlayer_Progressive'
); //end AC code
That function is in the script mentioned here -
<script src="../../../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
</head>
When I browse here -
http://www.digitalartsclub.jandove.com/Scripts/AC_RunActiveContent.js,
I get
file not found. You do the math....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jandove" <[email protected]> wrote in
message
news:[email protected]...
> Problem: progressive FLV doesn't display in browsers
> This is what I did: 1) inserted flash video (about 5 MB
and encoded in
> Flash
> Video dEncoder CS3) into a DW page. 2)Saved and checked
that it plays
> correctly in DW preview. 3) uploaded page,. FLV and
required
> FLVPlayer_Progressive.swf to server. 4) Checked with
server; they allow
> progressive FLVs. 5) From Adobe.com I downloaded and
replaced
> FLVPlayer_Progressive.swf in my local folder in case
cross-scripting
> vulnerability=the culprit. 6)uploaded new
FLVPlayer_Progressive.swf to
> server.
> Tried it at root level and in folder analogous to local
file. 7)Cleared
> browsers' caches, histories. Refreshed page. 8) did all
of this on Mac
> OS10.4
> and Windows XP (except #5 because Adobe site has 404
error on
> cross-scripting
> vulnerability link for Macs . Have notified Adobe about
404 three times.)
>
> URL:
>
http://www.digitalartsclub.jandove.com/pages/gallery/motion/jdove.html
>
> Very frustrated, would appreciate any suggestions
>
>
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=8,0,0,0','width','360','height','240','id','FLVPlayer','src','FLVPlayer_
>
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamNam
>
e=../../../media/motionartists/dove-mx&autoPlay=false&autoRewind=true','quality'
>
,'high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http:/
>
/www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','
> movie','FLVPlayer_Progressive' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=8,0,0,0" width="360" height="240"
id="FLVPlayer">
> <param name="movie"
> value="FLVPlayer_Progressive.swf" />
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=../../../media/mo
>
tionartists/dove-mx&autoPlay=false&autoRewind=true" />
> <embed src="FLVPlayer_Progressive.swf"
>
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=../../../medi
>
a/motionartists/dove-mx&autoPlay=false&autoRewind=true"
quality="high"
> scale="noscale" width="360" height="240"
name="FLVPlayer" salign="LT"
> type="application/x-shockwave-flash"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" />
>

Outdoor Wedding Theme - Intro Movie doesn't display

Similar Messages

Maybe you are looking for