Outer join not outer joining
Hi, I'm trying to do a query like this:
SELECT A.id, etc
FROM A,B,C
WHERE A.id(+) = B.id and A.id = C.id
GROUP BY A.id
and this isn't getting the values in B that don't match with A.
I also tried the ANSI syntax but I got the same result.
thanks in advance.
Hi your Join condition of A with C might be the one which is not getting what you want. WHy dont you try only between table A and B and see what you get.
SELECT A.id, etc
FROM A,B
WHERE A.id(+) = B.id
GROUP BY A.id
thanks
Similar Messages
-
Windows 8.1 will not allow me to join a domain
I am trying to join laptops running Windows 8.1 to domain. When I go to properties for This Computer, Join a domain wizard is greyed out. Can I join a Windows 8.1 computer to a domain?Have you verified that your Windows 8.1 is a Pro or Enterprise edition? The Basic edition cannot join a domain.
-
ORA-30563, Outer Join not allowed in select list
I can not find any information about this error message that I am getting.
I have just upgraded my Oracle database from Version 7.3 to Version 8.1.7, a stored procedure that was written in v7.3 has outer joins in the select statement.
when trying to run this proc in version 8 I get this meesage.(ORA-30563, Outer Join not allowed in select list)
code ex:
Select alt.id
decode(alt.advise, NULL, NULL, AA.act_yr(+))||'-'||AA.act_per(+)||'-'||AA.Acc_per_no(+)) as advise_no
from alt, AA;
Is there any information about this message anywhere? or does anybody know if this is a known issue with oracle ver 8.1.7?
Thanks
CJIt appears to have been a bug in 7.x
From a metalink note on bugs fixed in 8i (doc 132632.1)
974742 Oracle does not report an error if (+) is specified in select-list. The OUTER JOIN operator (+) is only valid in WHERE clause predicates. As this is not flagged as an error the query can give unexpected results. The correct action to avoid this problem is to fix the query.
Ken -
Why Inner join or Outer join is not used for Pool or Cluster tables ?
Hi SAP-ABAP Experts .
With Due Regards .
May u explain me why Inner join or Outer join is not useful for Pool or Cluster tables ?
because peoples advised not use Joins for Pool and Cluster tables , What harm will take place , If we do this ?
Best Regards to all : RajneeshBoth Pooled and Cluster Tables are stored as tables within the database. Only the structures of the two table types which represent a single logical view of the data are defined within the ABAP/4 Data Dictionary. The data is actually stored in bulk storage in a different structure. These tables are commonly loaded into memory (i.e., 'buffered') due to the fact they are typically used for storing internal control information and other types of data with little or no external (business) relevance.
Pooled and cluster tables are usually used only by SAP and not used by customers, probably because of the proprietary format of these tables within the database and because of technical restrictions placed upon their use within ABAP/4 programs. On a pooled or cluster table:
Secondary indexes cannot be created.
You cannot use the ABAP/4 constructs select distinct or group by.
You cannot use native SQL.
You cannot specify field names after the order by clause. order by primary key is the only permitted variation.
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers -
How to use left outer joins ,right outer joins and order by clause for belo
Hi,
How to use left outer joins ,right outer joins and order by clause for below XML query.
The query which is red colour returns null then its not displaying any values for columns in that tables. Tried decode, nvl function hasn't worked.
SELECT XMLAGG ( XMLELEMENT( "P", XMLFOREST( P.process_id AS Ppid,
(SELECT XMLAGG( XMLELEMENT( "PI", XMLFOREST( PI.question_id AS PIqid,
PI.process_id AS PIpid,
PI.innertext AS
PItext, PI.itemtype AS PItype,
PI.linkfrom AS PIfrom,
PI.linkto AS PIto,
PI.associated AS PIas,
PI.content_id AS PIc,
PI.exitpoint1_id AS PIe1,
PI.exitpoint2_id AS PIe2,
PI.exitpoint3_id AS PIe3,
PI.followoncall AS PIfoc,
PI.userinput AS PIui,
PI.resolveidentifier AS PIri,
PI.libquestion_idfk AS PIlqid,
PI.isLocked AS PIstls,
PI.PreviousAnswer AS PIPAns,
PI.VisibleToAgent AS PIVAgent,
PI.RetryAttempt AS PIRetry,
PI.Tags AS PITag,
SELECT XMLAGG( XMLELEMENT( "PO", XMLFOREST( PO.option_id AS POoid,
PO.question_id AS POqid,
PO.process_id AS popid,
PO.opt_innertext AS POtext,
PO.opt_linkfrom AS POfrom,
PO.opt_linkto AS POto,
PO.libquestion_idfk AS POlqid,
PO.liboption_idfk AS POloid ) ) )
FROM vw_liveProcessOption_Sim_v6 PO
WHERE PI.question_id = PO.question_id (+)
AND PI.process_id = PO.process_id (+)
) "A" ) ) ) AS "PO"
FROM vw_liveProcessItem_Sim_v6 PI
WHERE P.process_id = PI.process_id
) "A" ) ) ) AS "PI"
FROM liveProcess_ec P
WHERE (P.process_id = 450)
Any help really appreciated.
Thanksuser512743 wrote:
Hi,
Here below is the scripts of tables, insert statements and Required output.
CREATE TABLE VW_LIVEPROCESSOPTION_SIM_v6
( "OPTION_ID" NUMBER,
"QUESTION_ID" NUMBER(10,0),
"PROCESS_ID" NUMBER(10,0),
"OPT_INNERTEXT" VARCHAR2(200 CHAR),
"OPT_LINKFROM" VARCHAR2(20 CHAR),
"OPT_LINKTO" VARCHAR2(20 CHAR),
"LIBQUESTION_IDFK" NUMBER,
"LIBOPTION_IDFK" NUMBER
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,2,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,3,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,5,450,'Yes',null,'6',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,6,450,'Yes',null,'7',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,8,450,'Block All',null,'9',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,9,450,'Yes',null,'10',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,11,450,'Yes',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,12,450,'Yes',null,'13',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,14,450,'Yes',null,'16',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,2,450,'No',null,'3',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,3,450,'No',null,'4',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,5,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,6,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,8,450,'Standard',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,9,450,'No',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,11,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,12,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,14,450,'No',null,'15',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (3,8,450,'Disabled',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (4,8,450,'User Defined',null,'12',null,null);
REATE TABLE "VW_LIVEPROCESSITEM_SIM_v6"
( "QUESTION_ID" NUMBER(10,0),
"PROCESS_ID" NUMBER(10,0),
"INNERTEXT" VARCHAR2(200 CHAR),
"ITEMTYPE" VARCHAR2(50 CHAR),
"LINKFROM" VARCHAR2(500 CHAR),
"LINKTO" VARCHAR2(500 CHAR),
"ASSOCIATED" VARCHAR2(200 CHAR),
"CONTENT_ID" NUMBER,
"EXITPOINT1_ID" NUMBER(10,0),
"EXITPOINT2_ID" NUMBER(10,0),
"EXITPOINT3_ID" NUMBER(10,0),
"RESOLVEIDENTIFIER" VARCHAR2(40 CHAR),
"LIBQUESTION_IDFK" NUMBER(10,0),
"FOLLOWONCALL" NUMBER(1,0),
"USERINPUT" VARCHAR2(200 CHAR),
"ISLOCKED" NUMBER(1,0),
"PREVIOUSANSWER" NUMBER(1,0),
"VISIBLETOAGENT" NUMBER(1,0),
"RETRYATTEMPT" NUMBER(10,0),
"TAGS" VARCHAR2(50 BYTE)
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (1,450,'CBB1015 - Router Firewall Settinngs Process','Title',null,'2',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (2,450,'Is the customers PC Firewall turned off?','Question','1','2.2,2.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (3,450,'Advise the customer to turn off the PC Firewall in order to continue. Has this been done?','Question','2.2','3.2,3.1',null,278,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (4,450,'Advise the customer the PC Firewall must be switched off before this process????','ExitPoint','3.2',null,null,null,14,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (5,450,'Is the customer able to access the internet now?','Question','3.1,2.1','5.2,5.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (6,450,'Is the customer having a problem with a specific website?','Question','5.1','6.2,6.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (7,450,'1536: CBB1008 - Browser Setup and Daignostics','SubProcess','6.1',null,'1536-1-0',null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (8,450,'What is the security level on the CPE Management page?','Question','6.2,5.2','8.4,8.3,8.2,8.1',null,279,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (9,450,'Change the security level to Standard. Does this resolve the customers issue?','Question','8.1','9.2,9.1',null,280,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (10,450,'Issue Resolved','ExitPoint','9.1',null,null,null,1,6,122,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (11,450,'Change the security level to Disabled. Is the customer able to browse the internet?','Question','9.2,8.2','11.2,11.1',null,281,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (12,450,'Change the security level to Standard. Is the customer able to browse the internet now?','Question','11.1,8.3,8.4','12.2,12.1',null,283,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (13,450,'Issue Resolved','ExitPoint','12.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (14,450,'Ask the customer to perform a master reset. Does this resolve their issue?','Question','12.2,11.2','14.2,14.1',null,282,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (15,450,'Faulty CPE','ExitPoint','14.2',null,null,null,1,6,124,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (16,450,'Issue Resolved','ExitPoint','14.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
CREATE TABLE "LIVEPROCESS_EC_V"
( "PROCESS_ID" NUMBER(10,0),
"USER_ID" NUMBER(10,0),
"CREATED" TIMESTAMP (6)
Insert into LIVEPROCESS_EC (PROCESS_ID,USER_ID,CREATED) values (450,7460,to_timestamp('21-APR-08 09.34.41.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'));
Required O/P in XML format
<P>
<Ppid>450</Ppid>
<PI>
<PIqid>1</PIqid>
<PIpid>450</PIpid>
<PItext>CBB1015 - Router Firewall Settinngs Process</PItext>
<PItype>Title</PItype>
<PIto>2</PIto>
<PO />
</PI>
<PI>
<PIqid>2</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customers PC Firewall turned off?</PItext>
<PItype>Question</PItype>
<PIfrom>1</PIfrom>
<PIto>2.2,2.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>3</POto>
</PO>
</PI>
<PI>
<PIqid>3</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer to turn off the PC Firewall in order to continue. Has this been done?</PItext>
<PItype>Question</PItype>
<PIfrom>2.2</PIfrom>
<PIto>3.2,3.1</PIto>
<PIc>278</PIc>
<PO>
<POoid>1</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>4</POto>
</PO>
</PI>
<PI>
<PIqid>4</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer the PC Firewall must be switched off before this process????</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>3.2</PIfrom>
<PIe1>14</PIe1>
<PO />
</PI>
<PI>
<PIqid>5</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer able to access the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>3.1,2.1</PIfrom>
<PIto>5.2,5.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>6</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>6</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer having a problem with a specific website?</PItext>
<PItype>Question</PItype>
<PIfrom>5.1</PIfrom>
<PIto>6.2,6.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>7</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>7</PIqid>
<PIpid>450</PIpid>
<PItext>1536: CBB1008 - Browser Setup and Daignostics</PItext>
<PItype>SubProcess</PItype>
<PIfrom>6.1</PIfrom>
<PIas>1536-1-0</PIas>
<PO />
</PI>
<PI>
<PIqid>8</PIqid>
<PIpid>450</PIpid>
<PItext>What is the security level on the CPE Management page?</PItext>
<PItype>Question</PItype>
<PIfrom>6.2,5.2</PIfrom>
<PIto>8.4,8.3,8.2,8.1</PIto>
<PIc>279</PIc>
<PO>
<POoid>1</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Block All</POtext>
<POto>9</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Standard</POtext>
<POto>11</POto>
</PO>
<PO>
<POoid>3</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Disabled</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>4</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>User Defined</POtext>
<POto>12</POto>
</PO>
</PI>
<PI>
<PIqid>9</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Does this resolve the customers issue?</PItext>
<PItype>Question</PItype>
<PIfrom>8.1</PIfrom>
<PIto>9.2,9.1</PIto>
<PIc>280</PIc>
<PO>
<POoid>1</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>10</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>11</POto>
</PO>
</PI>
<PI>
<PIqid>10</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>9.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>122</PIe3>
<PO />
</PI>
<PI>
<PIqid>11</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Disabled. Is the customer able to browse the internet?</PItext>
<PItype>Question</PItype>
<PIfrom>9.2,8.2</PIfrom>
<PIto>11.2,11.1</PIto>
<PIc>281</PIc>
<PO>
<POoid>1</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>12</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Is the customer able to browse the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>11.1,8.3,8.4</PIfrom>
<PIto>12.2,12.1</PIto>
<PIc>283</PIc>
<PO>
<POoid>1</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>13</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>13</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>12.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
<PI>
<PIqid>14</PIqid>
<PIpid>450</PIpid>
<PItext>Ask the customer to perform a master reset. Does this resolve their issue?</PItext>
<PItype>Question</PItype>
<PIfrom>12.2,11.2</PIfrom>
<PIto>14.2,14.1</PIto>
<PIc>282</PIc>
<PO>
<POoid>1</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>16</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>15</POto>
</PO>
</PI>
<PI>
<PIqid>15</PIqid>
<PIpid>450</PIpid>
<PItext>Faulty CPE</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.2</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>124</PIe3>
<PO />
</PI>
<PI>
<PIqid>16</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
</P>
Thanks in advance
Edited by: user512743 on Nov 18, 2008 4:46 AM -
Difference between inner join and outer join
1.Difference between inner join and outer join
2.wht is the difference in using hide and get crusor value in interactive.
3. Using join is better or views in writting program . Which is better.Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Inner Join
|--||||||||--|
| A | B | C | D | D | E | F | G | H |
|--||||||||--|
| a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
| a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
| a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
|--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID AND
FCONNID = PCONNID
WHERE P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.
Note
In order to determine the result of a SELECT command where the FROM clause contains a join, the database system first creates a temporary table containing the lines that meet the ON condition. The WHERE condition is then applied to the temporary table. It does not matter in an inner join whether the condition is in the ON or WHEREclause. The following example returns the same solution as the previous one.
Example
Output of a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE LIKE SFLIGHT-FLDATE,
CARRID LIKE SFLIGHT-CARRID,
CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
INTO (CARRID, CONNID, DATE)
FROM SFLIGHT AS F INNER JOIN SPFLI AS P
ON FCARRID = PCARRID
WHERE FCONNID = PCONNID
AND P~CITYFROM = 'FRANKFURT'
AND P~CITYTO = 'NEW YORK'
AND F~FLDATE BETWEEN '20010910' AND '20010920'
AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
Note
Since not all of the database systems supported by SAP use the standard syntax for ON conditions, the syntax has been restricted. It only allows those joins that produce the same results on all of the supported database systems:
Only a table or view may appear to the right of the JOIN operator, not another join expression.
Only AND is possible in the ON condition as a logical operator.
Each comparison in the ON condition must contain a field from the right-hand table.
If an outer join occurs in the FROM clause, all the ON conditions must contain at least one "real" JOIN condition (a condition that contains a field from tabref1 amd a field from tabref2.
Note
In some cases, '*' may be specified in the SELECT clause, and an internal table or work area is entered into the INTO clause (instead of a list of fields). If so, the fields are written to the target area from left to right in the order in which the tables appear in the FROM clause, according to the structure of each table work area. There can then be gaps between table work areas if you use an Alignment Request. For this reason, you should define the target work area with reference to the types of the database tables, not simply by counting the total number of fields. For an example, see below:
Variant 3
... FROM tabref1 LEFT [OUTER] JOIN tabref2 ON cond
Effect
Selects the data from the transparent database tables and/or views specified in tabref1 and tabref2. tabref1 und tabref2 both have either the same form as in variant 1 or are themselves join expressions. The keyword OUTER can be omitted. The database tables or views specified in tabref1 and tabref2 must be recognized by the ABAP-Dictionary.
In order to determine the result of a SELECT command where the FROM clause contains a left outer join, the database system creates a temporary table containing the lines that meet the ON condition. The remaining fields from the left-hand table (tabref1) are then added to this table, and their corresponding fields from the right-hand table are filled with ZERO values. The system then applies the WHERE condition to the table.
Left outer join between table 1 and table 2 where column D in both tables set the join condition:
Table 1 Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
Left Outer Join
|--||||||||--|
| A | B | C | D | D | E | F | G | H |
|--||||||||--|
| a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
| a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
| a3 | b3 | c3 | 2 |NULL|NULL|NULL|NULL|NULL|
| a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
|--||||||||--|
Regards
Prabhu -
Equal Join and Outer Join in OBIEE
Hello expert,
I think the default join in OBIEE is Outer Join. So no matter what join conditions that I specify on the physical layer, the result that I get in the presentation layer is still outer join.
How to specify the equal join or inner join in Business and Logical layer?Hello,
Thank you for your reply. However it does not work. I got the following message:
[nQSError: 32005] The object "Fact - Fruit" bc if type 'LOGICAL TABLE SOURCE': is missing a foreign key or a complex join in the join graph.
The situation that I have is:
Fact table: "Fact - Fruit"
List of value table (look up table): "dim_list_of_values"
I am only interested in the type in the "dim_list_of_values" table where equals to "Apple". So I only want to join the "Fact - Fruit" and "dim_list_of_values" with those records with "Apple" type.
It sounds to me that I am unable to define a freign key. -
SYNTAX "INNER JOIN and OUTER JOIN"
Hi Experts,
I think LEFT JOIN,INNER JOIN syntax is in ANSI.
I know that Oracle has got its own alternate(+) operator to serve the purpose.
Please tell me whether INNER JOIN,OUTER JOIN,LEFT JOIN,LEFT OUTER JOIN,RIGHT OUTER JOIN these syntaxes present in ORACLE 8I.
If not in 9i Or highr versions are they existing?
Thanks in advance,
Ananth
nullHi,
8i has inner join. (+) syntax supports LEFT or RIGHT OUTER JOIN.
FULL OUTER JOIN is supported in 9i, which introduces the JOIN keyword.
Herman -
Error occurred when executing query involving cross join or outer join
Hi,
I tried to execute the following query:
select count(*)
from
po,
invoice,
table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
where
extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID') =
extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')(+)
It produced the following error:
Error: ORA-00936: missing expression
Then I change the query to:
select count(*)
from
po left outer join
invoice cross join
table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
on
extractValue(po.content, '/PurchaseOrder/Header/DocumentID/RID')
= extractValue(value(invoice_line_item), '/LineItem/Product/PurchaseOrderIdentifier/documentCreatorIdentifier')
It produced the following error:
Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
If I simply the query to:
select 1
from
invoice cross join
table(xmlsequence(extract(invoice.content, '/CommercialInvoice/Body/LineItemDetails/LineItem'))) invoice_line_item
It also produced the following error:
Error: ORA-00904: "INVOICE"."SYS_NC0012900130$": invalid identifier
What is the cause of the problem? How to resolve it?
The version I am using is 10.1.0.2.0 on Windows. Any help would be much appreciated.Hi,
Recently we went for BW upgradatiaon (BI7.0) , the error you are facing could be due to the following issue,
If infoobjects are used in infoset as infoprovider ( in BW3.5) after upgrade this infoobjects will not be selected automatically as infoproviders. So it will not be available for Infoset.
Please check whether any infoobjects are used as infoprovider, if so manually change them as infoprovider ( In BI7) and activate.
Since, few reports are working on the infoset , this could be those reports are not using the fields from the infoobjects. so it is working it seems.
Please check and let me know.
Thanks,
V.Senthil -
Invalid combinations of joins involving outer joins
Hi all, I have the following problem
Scenario: I created 6 custom folders:
Tasks (with measures)
Type
Criticity
Status
Owners
Assignees
The first folder is used to retrieve how many tasks (COUNT(tasks)) have a particular type or status or a combination between them, and the others 5 are dimensions.
I create 6 joins starting always from the dimensions in this way (radio buttons):
Detail item values always exist in master folder (Typical)
Outer join on detail
where the master is always a dimension and the detail is always the custom folder with the measures.
I put the outer join on the custom folder with the measures because I want to show '0' in case I don't have any record on this folder for a specific attribute on a dimension (the join fails).
I saw that if I put the outer join on the master (dimensions), when the join fails I don't see at all the information regarding that particular dimension.
For example
I select 2 folder: Tasks and Assignee
join: Tasks.task_id (+) = Assignee.task_id
Result:
TASK ASSIGNEE
10 Mr. A
20 Mr. B
30 Mr. C
0 Mr. D
Just to make a test, If I change the join on Administrator putting :
Detail item values might not exist in master folder
Outer join on master
...the result is this
TASK ASSIGNEE
10 Mr. A
20 Mr. B
30 Mr. C
...I don't see the last record.
The customer asked to see always the record with task =0 (if exists), so I joined all the custom folders as I expalned above, but when I try to link (on Discoverer Plus) more than two tasks I have the following error:
Invalid combinations of joins involving outer joins
So, my question is this: how can I avoid this error ? Does it exist any trick or another way to link the custom folders (showing always the records with '0' when the join doesn't retrieve nothing ) ?
Thanks in advance
AlexWell I will take a stab at answering this. The problem is not knowing what is in your custom folders. Also not knowing the specifics on your Discoverer Join definitions. On something like this you may be better going to Oracle support, since they can start a Web Conference and see exactly what you see, and can check out the various possibilities. All we here can do is make guesses, and the guesses could be wrong.
You do have to be careful in your join definitions in Discoverer. You have to pick the correct table as the Master table, and the correct table as the Detail table. Mess that up and you can mess yourself up. So my first though is check your join definition. Sounds like you want assigned to be the master table. Then tasks would be the detail table.
Then you want to pick the option that detail items might not exist in master. Which it looks like you have done.
Then for the other options, Oracle, in my mind, does the opposite of what I would think to pick. If you pick OUTER JOIN ON DETAIL, that will include the Master items with no detail items. So that is what you need to pick.
Looks like you did the OUTER JOIN ON MASTER, which means will include detail items with no master. Since you had a master with no detail, it will not show, and that is why the Mr. D does not show.
I always have to do the help on this because it is opposite of what I would expect - my mind thinks outer join on master should include all masters. Nope, it has to be the outer join on detail to do that.
The master with no detail will probably show a NULL value in the column for the detail, instead of 0. You could convert the null value to display as a 0.
Hope this helps a bit. Just remember that I am guessing/speculating on a possible cause.
John Dickey -
Inner join Vs Outer join with ABAP code...?
Inner join Vs Outer join with ABAP code...?
Inner Join means, it will not select that recor at all, unless there is a matching entry in the second table.
suppose table VBAK INNER join table VBAP on VBAKVBELN = VBAPVBELN.
In this case, if there are no entries in VBAP, the header entry also will not show up.
But in case of OUTER JOIN, even if there is no items, it will show the header entry(VBAK) with blank columns for fields from item table.(VBAP)
here is one sample for inner join.
SELECT A~EBELN
A~EKORG
A~EKGRP
A~BSART
A~LPONR
A~LOEKZ
A~LIFNR
A~RESWK
B~AEDAT
B~WERKS
B~MATNR
B~MENGE
B~EBELP
B~ELIKZ
B~PLIFZ
B~PSTYP
B~KNTTP
B~MATKL
B~ZZD_PLANT
FROM EKKO AS A INNER JOIN EKPO AS B
ON
AEBELN = BEBELN
INTO CORRESPONDING FIELDS OF TABLE T_DATA
FOR ALL ENTRIES IN T_EKET
WHERE
A~EBELN EQ T_EKET-EBELN AND
A~BSART EQ C_UBSTO AND
A~EKORG IN S_EKORG AND
A~EKGRP IN S_EKGRP AND
A~BSTYP EQ C_BSTYP AND
A~LOEKZ EQ SPACE AND " Order not deleted
A~RESWK IN S_RESWK AND
B~EBELN EQ T_EKET-EBELN AND
B~EBELP EQ T_EKET-EBELP AND
B~WERKS IN S_WERKS AND
B~MATNR IN S_MATNR AND
B~MATKL IN S_MATKL AND
B~LOEKZ EQ SPACE. " Line item not deleted -
Inner join and outer join in infosets
hi everyone,
i have a doubt in infosets...
when and why we use inner and outer joins(right outer join and left outer join) for infoset
please give a real time scenario........
Thanks in advance.
Bye.Hello,
Inner join:
For example, the requirement is to show all sales documents where you have delivery exists. In this case, you join both sales ods and delivery ods in a infoset as inner join. This will match the record against the reference documents and pull only matched records.
Outer Join:
Suppose you want to pull all billing/invoice details along with their FI documents related data in a report. Assume that always there might be a situation that invoice exists but not posted to FI, however, you want to have all billing documents details either it has FI document or not. In this case, you link both Billing data and FI document data in a outer join. This will pull all invoices data either FI document exists or not. Other words, you want to show one side of data always but adding additional details from differenent source if data exists.
Hope, it clarifies your doubt. Let me know if any questions.
Thanks
Viswa -
Hi,
I need to join three tables, based on some conditions (EKPO, EKBE and EKKN Note: All PO line items from EKPO will have a movement associated in the EKBE Table. Capture all PO line items where no matches found in the EKPO-EKBE join)
for the above requirement shall I write my query like this?
SELECT ekpo~ebeln
ekpo~ebelp
ekpo~loekz
ekpo~txz01
ekpo~matnr
ekpo~bukrs
ekpo~werks
ekpo~menge
ekpo~meins
ekpo~knttp
ekbe~vgabe
ekbe~bwart
ekbe~menge
ekbe~dmbtr
ekbe~shkzg
ekkn~sakto
ekkn~kostl
ekkn~ps_psp_pnr
INTO CORRESPONDING FIELDS OF TABLE i_podata
FROM ekpo LEFT OUTER JOIN ekbe ON ekbeebeln = ekpoebeln AND
ekbeebelp = ekpoebelp
INNER JOIN ekkn ON ekknebeln = ekpoebeln AND
ekknebelp = ekpoebelp
WHERE ekpo~werks IN s_werks AND
ekpo~ebeln IN s_ebeln.
Shall I use both Outer Join and Inner join in one Query?
Please correcte me.
Thanks
Frank RexHi,
You can use both inner join and outer join in the same select statement.
Ensure first all the inner joins between tables are declared and put the left outer join at the end.
Some sample code for your reference:
SELECT
AVBELN AKUNNR ABSTNK ABSTDK AVKORG AVTWEG AAUART AKNUMV
BPOSNR BMATNR BWERKS BSPART BLGORT BKZWI1
SUM( BKWMENG ) AS KWMENG DBZIRK D~VKGRP
EDISPO EPRCTR
FROM VBAK AS A INNER JOIN VBAP AS B ON AVBELN EQ BVBELN
INNER JOIN VBPA AS C ON CVBELN EQ BVBELN
INNER JOIN KNVV AS D ON DKUNNR EQ AKUNNR
AND DVKORG EQ AVKORG AND DVTWEG EQ AVTWEG
LEFT OUTER JOIN MARC AS E ON E~MATNR EQ
BMATNR AND EWERKS EQ B~WERKS
INTO CORRESPONDING FIELDS OF TABLE IT_ORDERS
WHERE A~VKORG IN SO_VKORG
AND A~VTWEG IN SO_VTWEG
AND A~KUNNR IN SO_KUNNR
AND A~ERDAT IN SO_ERDAT
AND A~AUART IN ('ZFOR','ZROR','ZEOR','ZDXR','ZXOR','ZRM1','ZGOR','ZSOR')
AND B~MATNR IN SO_MATNR
AND B~WERKS IN SO_WERKS
AND B~SPART IN SO_SPART
AND B~ABGRU EQ SPACE
AND A~LIFSK EQ SPACE
AND A~FAKSK EQ SPACE
AND B~VSTEL IN SO_VSTEL
AND B~LGORT IN SO_LGORT
AND C~KUNNR IN SO_SHIP
AND C~PARVW EQ 'WE'
AND D~VKGRP IN SO_VKGRP
AND D~BZIRK IN SO_BZIRK
AND B~LGORT NE '0950'
GROUP BY AVBELN AKUNNR ABSTNK ABSTDK
AVKORG AVTWEG AAUART AKNUMV B~POSNR
BMATNR BWERKS BSPART BKZWI1 D~BZIRK
DVKGRP BLGORT EDISPO EPRCTR E~MATGR.
Lakshminarayanan.
P.S.Mark all helpful answers for points. -
hi friends,
how to use inner join and outer join methods in abap. pls explainyou have to code them
Seriously, I suggest you take an ABAP class, it's out of the scope of this forum to tech you how to program joins.
Markus -
Hi guys,
I am not sure why the left join is not working.. when I try to use the and condition out of the left join condition. The database is relational but the requirement is for reporting. I have 2 user inputs and I should get the query results as explained below..
Let me explain with the sample data.
Table 1: PRTYPE (P)
TYPEID CLASSID
T001 CLS001
T001 CLS002
T001 CLS003
T002 CLS002
T003 CLS001
Table 2: EMPLOYEE (E)
EMPID NAME
E001 Joe
E002 Mark
E003 Lucy
Table 3: DETAILS (D)
EMPID CLASSID STATUS
E001 CLS001 NEW
E001 CLS002 DONE
E002 CLS001 NEW
E002 CLS004 NEW
Report1:
Input: PRTYPE.TYPEID = T001, EMPID = E001
Output:
E.NAME E.EMPID P.TYPEID A.CLASSID D.STATUS
JOE EMP001 T001 CLS001 NEW
JOE EMP001 T001 CLS002 DONE
JOE EMP001 T001 CLS003 BLANK
Report2:
PRTYPE.TYPEID = T003, EMPID = E003
E.NAME E.EMPID P.TYPEID A.CLASSID D.STATUS
LUCY E003 T003 CLS001 BLANK
LUCY E003 T003 CLS004 BLANK
When I use and condition in left join itself, it works but when I take it to the end of the sql using where p.typeid= T001 and E.EMPID = E001 I am not getting the left join results... It looks like Oracle doesn't like the condition at the end. I hope I am clear on explaining. Please share your experience on how to get it working..
Thank youHi,
Welcome to the forum!
user12118328 wrote:
I am not sure why the left join is not working.. when I try to use the and condition out of the left join condition. The database is relational but the requirement is for reporting. I have 2 user inputs and I should get the query results as explained below..
When I use and condition in left join itself, it works but when I take it to the end of the sql using where p.typeid= T001 and E.EMPID = E001 I am not getting the left join results... It looks like Oracle doesn't like the condition at the end. I hope I am clear on explaining. Please share your experience on how to get it working..I'm not sure what you mean. Why don't you post your query? You know, it will be easier for someone to tell you what you're doing wrong if they know what you're doing.
Are you saying that you get the correct results when you have a cerain condition in an outer join, but that you get the wrong results if you put the exact same condition in the WHERE-clause?
If so, keep the condition where it does what you want.
You can usually move INNER join conditions around like that, but never OUTER join conditions.
As Alex said, if you want help, post executable statement to create and populate your tables with a little sample data, as well as the output you want from that sample data, and your best attempt at a query.
Maybe you are looking for
-
80G Video iPod - Not sure what the problem is
So this problem just randomly started occuring. What will happen is my iPod will freeze completely, and then it will go to this screen which has a warning i have never seen before. It is an iPod with a triangular warning sign on it (with exclamation
-
Possible to add BI publisher report in OBIEE 11g
Hi, i have an requirement to add publisher report in my OBIEE 11g dashboard, i am not sure that can be possible, if yes can anyone help to do the way please. thanks in advance !
-
How much would I have to pay monthly if I want to get financing for a MacBook?
How much would I have to pay monthly if I want to get financing for a MacBook Pro?
-
Call establish alert - missing feature
Hi, I'm using 6300 and wish to hav a new, basic and simple but imp feature for Nokia phones. not sure if this is already available in other Nokia models. You would agree that there is a time delay (min 10-20 seconds) from the time the caller hit the
-
Sending error msgs through email and sms
Hi, does anyone done on sending error msg file through email and sms. if so share some knowledge with me. thanks in advance