Outgoing Call block on operator 7961 after office-hours

Hi guys,
we have call block enabled on our ccme 4.2 for 900 pattern and all users use pin to
make international calls.Now we want to block all 9.T pattern after office hours for operator phones only .please advise

Thanks Nadeem for your reply but the issue is i want to block outgoing calls
after office only for reception phone. other phones should work normal
we are blocking 24/7 international call using call blocking,users use login pin
so if i put other pattern of 9.T For local ,national and international to block after office-hours all phones will get blocked and all uses have to use pin after office to make calls
plus cant put after-hours exempt then cannot control users with international pin dialing
plz advise

Similar Messages

Automatic Call flow to auto-attendent after office hours

Currently running CCM 4.1, I would like to automatically switch some of our service lines automatically to a announcement service stating we're close for the day during weekdays and on weekends, can it be done? Is there anything I should consider having to purchase?

Yes, using the Time of Day Routing feature. Check this link for more details.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a03tod.htm
Regards,
Anup

Problem in message forwarding to SAP after office hours

Dear All,
i have a problem in forwarding the message with the priority very high to SAP after office hours.
can you please help me
Thanks,
Heba Hesham

Hi,
to get the automatic message forward working outside your business hours you need to maintain so called "Business Partner Call Times". See the IMG activity under the following path:
- solution manager
- SAP partner-specific settings
- service desk for service provider
- general settings
- maintain Business Partner Call Times
Use
Another component of the VAR functionality is to forward messages created with priority "Very High", outside the business hours of a service provider, directly to SAP. To be able to use this function, you must maintain calling times for the business partners of ordering parties.
You can specify the availability time for all VAR customers.
Activities
1. Choose a business partner.
2. Choose the Control tab.
3. Choose Calling Times in Business Hours.
4. Specify the weekly rule and days or hours.
5. Save.
In addition, the action for autom. sending messages to SAP in SPPFCADM should be maintained (e.g. AI_SDK_SP_SEND_AUTO)
Regards,
Richard

Print queue auto-deleted when printer is switched off after office hours

We have our fax program running 24-7 and autoprinting every received fax. When the printers are sutdown outside office hours, xserve deletes the jobs without holding them until the printers become available again.
Is there a trick to keep the jobs (auto) on hold and be printed as described above?
thanks
G5 2x2 Mac OS X (10.3.9)

Thanks for this info. Just what I need. Not intuitive at all. Jim

Suddenly Error -17306 in LV-Operator-Interface after 3 hours when trying to read a StationGlobal

Hello,
i´m using the example-labview-operator-interface with some modifications.
One
of the changes is that i created a Thread (UserEcentCallback.vi) which
reads a value from the StationGlobals and displays it on the OP.
This
thread is running in a loop and executed every second. This worked fine
for ~ 3hours and suddenly the attached error-message appeared.
What can i do to prevent this problem?
I´m using the default "TestStand Get Property Value.vi" to read the Globals.
Thanks for all tips.
(Sorry for double posting, buut i dont know if this is a labview or teststand-problem)
Attachments:
error4.JPG ‏66 KB

Hi,
That seems a strange one, especially seeing the VI before it must have found the property ProjectParameter as it read State_Mode without problems.
I guessing ProjectParameter is still present in your StationGlobals after the error occurred!
As to what to do, you could do a Check to make sure the property exists before reading the data.
Regards
Ray
Regards
Ray Farmer

N8 outgoing calls NOT ALLOWED

Hello,
I have a problem, not always but sometimes when I unlock keypad on my phone /Iam using a password lock/ and I try to make a call it says NOT ALLOWED. The incoming calls works without problem only the outgoing calls are NOT ALLOWED. After switching off and on its working. Any solutions about this? Thanks a lot-

Hi cryoy,
Are you able to send and receive SMS messages with no problem? If so, could you also put your SIM into another phone just to check that it is not your SIM/operator dropping out.
Report back here.
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Ios 7 Bug when making outgoing calls

When I try to make an outgoing call, it rings once, then after a few seconds of silence it goes straigt to voicemail.
This is happenning 3 out of 4 times when I try to make a call

Its sounds related to this problems with voice calling on this thread:
https://discussions.apple.com/thread/3404857?start=1560&tstart=0

Enable traffic only during office hours

hi,
is there a way to allow traffic on wireless network only during network hours ? i did not seen this feature in our controllers, is there any other way to disable the wireless network after office hours and schedule to get it enable next day before office hour.
thanks,
anvar

is there a way to allow traffic on wireless network only during network hours
Yes there are five (5) popular methods. And it will depend on what equipment you've got and/or how technically confident you are. The methods are:
You can enable time-based access on your Windows AD;
You can use time-based ACL and apply the ACL on the VLAN interface of your wireless network;
If you have WCS/NCS/PI, you can enable time-and-date to enable/disable the radios of the AP;
If you have WCS/NCS/PI, you can enable time-and-date to enable/disable the SSID; and finally
If your switch is Cisco then you can let the APs power down using EnergyWise.
Method 2 is popular and easy if you don't have Cisco WCS/NCS/PI. Option 4 is the most "destructive" because there's a chance your AP won't be powering up. This holds true of your AP is listed among the "Cisco Memory Component Issue".

No audio on incoming or outgoing calls after operating system upgrade

I have iphone 4.....Everything was working fine with it until today when I upgraded to iOS 5. My condition seems to be described here in several other posts where the phone app appears to be working fine but I can't hear anyone and no one can hear me once connected. I called tech support who advised to do a full reset....which I did many times with no luck. Each time...the problem continued. I got one call out of the phone after the upgrade.
I tried the head phone jack solution which appeared commonly throughout but also did not have any luck.
Out of pure frustration.....I decided to drop my phone about a meter on its back side. I figured it couldn't hurt.
Tried again...and everything is working fine now.
I have no explanation. I did 10+ resets and it was not fixing the problem.....dropped it once and I'm back in business and everything is working normally again.

Any good news for my Disabled phone brothers?
Will iOS 5.1 resolve this freeeking bug issue?
What developers say? Apple had noticed the issue or just ignoring and tryng to be dumb as always?
Please let me know.

I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

After connecting my blue tooth it works for a few incoming and outgoing calls. Then for no reason when i make a call the other party cannot hear me and even if i try to click on the speaker phone or hand set they cannot hear me. rebooting required

Blue tooth operation and lock up. After i connect my bluetooth it works fine foe a few calls. Then if i place an outgoing call, I cannot hear the reciving party but they can hear me. Other times i can hear them but they cant hear me. After rebooting the phine it works again for a few calls. This is consistent with 2 diferent blue tooth devices?

Sorry about the delay, I have been away from my computer for a couple of days.
Since you are able to use Siri and dictate notes, that indicates the mic itself is working.
I would suggest fully quiting the Phone app and resetting the iPhone.
Double click the Home button (bottom center of the display with square icon on it) to get the fast switcher. Press and hold on one of the icons so they start "shivering" and the red "-" icons. locate the Phone icon and press the red "-" on it. Then press the Home button again to stop the "shivering".
Then Reset the iPhone, press and hold the Home and Sleep/power (top right edge of iPhone) buttons until you get the Apple logo. Wait for it to finish restarting and then test again.

Help me! After updating my iphone 3g is no longer able to call. Outgoing calls are completely silent for the recipient

Help me! After updating my iphone 3g is no longer able to call!!
Outgoing calls can be made but the recipient does not feel anything. I own a phone that is useless!

First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
If that does not work, Restore your iPhone in iTunes from your backup.
If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

Can't Make Any Outgoing Calls After 7.0.2. Update iPhone 5 Verizon???

After I updated my phone to 7.0.2. I ahve not been able to make outgoing calls. And when I speak into the phone all i cam here is myvoice through the ear piece. I would have o hang up and try again atleast 3 times to get the call to go through. Also when on the phone with headset the phone will constantly say call failure even though I have a strong signal. It's an iPhone 5 thru Verizon. Please Help!!!

The same problem for me. When i'm trying to make outgoing call, 60% of times it's just freezing at "Calling...." without any sounds inside. When i'm trying to cancel phone call, it's freezing at "Cancelling...". But 2-3 minute doesn't do it.
My friends most of times can't phone to me because iphone always unavaiable. The one things that helps - every time reset phone with button. During one day it can be 20-30 times.
THIS IS THE WORST IOS WHAT I EVER SEEN... iPhone should be PHONE primary, not any other features.
iPhone 5 / iOS 7.0.2
Problems starting from iOS 7.0.0

How to block the incoming and outgoing calls by programmatically

I want to block incoming and outgoing calls from my application. Is it possible?

For App Development questions, please post in the Development Forums made available to you as a Developer. We cannot answer these questions here.
https://discussions.apple.com/community/developer_forums

SPA-3102 Drops outgoing calls after 58sec everytime

Hi there
Can someone please help me resolve this problem of outgoing calls being dropped after 58sec? I have searched everywhere for an answer, including my ISP, without any joy.

It could be due to the other end negotiating a differnet codec during calls. Try fixing the codec selection on both ends. In addition, check mtu setting on your router. I had a similar problem when routers at either end of a vpn tunnel had different mtu settings and the call was dropped when voip packets got bigger than the other end could accept.

Outgoing Call block on operator 7961 after office-hours

Similar Messages

Maybe you are looking for