Outgoing calls are not going on my iphone 3gs....

i am not able to make any outgoin calls on my iphone 3gs. I am getting incoming calls. I am in chennai can anyone tell me an authosized service centre.

it is all fine with the sim card. i have tried a different service provided sim also. while talking on the fone suddenly the iphone gets restarted & cut...

Similar Messages

Incoming skype calls are not ringing on my iphone

incoming skype calls are not ringing on my iphone. It used to work but now doesn't. I can't find anywhere in the settings to fix this.
Any suggestions?
Solved!
Go to Solution.

Ever since iOS5 the ringer and display does not work. No notifications.
I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
Do not waste anyone's time with cookie-cutter answers.
My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
I've deleted and reinstalled 3x. It is running. Volume is correct.
This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
You are pushing things towards class litigation here in the US. There is no excuse.
Microsoft now owns Skype. They are a US corporation and are liable.
iPhone4
iOS5
Skype 3.5.117(3.5.0.117)
Notifications: Sound ON Alerts ON
Volume is at 100%
Ringer is at 100%

My calls are not going to voice mail, the phone just rings any suggestions?

Voice mail is installed, but incoming calls are not goint to voice mail.. What can I do?

Check with your Phone Carrier that Voice Mail is Setup and Activated...

Books are not showing up in iphone 3gs

i am not able to transfer my pdf book into my iphone 3gs even i already have installed pdf in my iphone.also i can not import or export pictures in my iphone.

"My audio books are not showing up in purchase history,"
That is correct. You cannot redownload audiobooks.
" is anyone having the same problem?"
Everyone and it is not a problem. Audiobooks simply are not available for redownload.

Outgoing mails are not going on N97

Dear All,
Please help me out. I have N97 and i have set up the mail box but i can only receive the message but i cannot send it from my mobile. when i checked out in my outlook configuration i found, there is one option more settings, once i press the icon i get one more window where it is mentioned my outgoing server SMTP requires authentication and below that it is mentioned that log on using username and password. i know the username and password but the same is not showing in my N97.
Please help me out how to solve this.
Regards
Santosh

it is all fine with the sim card. i have tried a different service provided sim also. while talking on the fone suddenly the iphone gets restarted & cut...

All of a sudden, events entered on boss's calendar from my pc are not going to his iphone.

all was working fine. i'd enter events to his calendar from my pc & he'd have it on his iphone calendar or vice versa. all of a sudden my event entries don't show on his iphone and events he enters on iphone don't show on my pc.

How is that problem related to Firefox support?

Our photos are not going from the iPhone/iPad to the computer?

Does the iCloud control panel have to always be logged on? We have two "clouds" to upload from, my husband's and mine. How do we make this work?

anyone?

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
Both devices have the Icloud on.

Try this on All Devices...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

TS3989 photos from my iphone are not going over in icloud to my ipad? both have photostream on any ideas?

photos from my iphone are not going over in icloud to my ipad? both have photostream on any ideas?

Are these photos that were on your iphone before you set up photo stream? If so, too late. Only photos taken after setting up photo stream are synced.

Incoming sip calls are not working but outgoing is working with cme

I have CME setup with voip.ms on my 2800 router, my outgoing calls are working but my incoming calls are not. Below is my config, please let me know if it is something with my config:
voice translation-rule 3
rule 1 /^9142281$...$$/ /\1/
voice translation-profile INCOMING_CALL_1
translate called 3
dial-peer voice 1 voip
translation-profile incoming INCOMING_CALL_1
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
dtmf-relay rtp-nte
no vad

I made the change, but I am getting no output from debug voip ccapi inout. What does concern me from debug ccsip messages is:
Aug 31 12:42:04.195: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 400 Bad Request - 'Invalid Host'
Via: SIP/2.0/UDP 107.6.67.238:5060;branch=z9hG4bK000d3c36;rport
From: "+19144410197" <sip:[email protected]>;tag=as7439b9c1
To: <sip:[email protected]:1061>;tag=829C8-2532
Date: Sun, 31 Aug 2014 12:42:04 GMT
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Allow-Events: telephone-event
Reason: Q.850;cause=100
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
I also am getting this:
voicertr2#debug ccsip error
SIP Call error tracing is enabled
voicertr2#
Aug 31 12:45:07.359: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
Aug 31 12:45:07.359: //-1/78AE76E98009/SIP/Error/sact_idle_new_message_invite: Invalid URL in incoming INVITE

HT201317 Some of my photos in my Photo Stream on my iPhone are not going over automatically to my computer. How do I fix this?

Some of my photos in my Photo Stream on my iPhone are not going over to my laptop. I can't figure out why, and I use them for scrapbooking. My laptop is a PC NOT a MAC.

Welcome to the Apple Community.
For the avoidance of doubt, are the photos actually in photo stream on your iPhone or just in your camera roll?
If they are in photo stream, then you might try turning photo stream off and on again on both devices, restarting both devices before enabling photo stream once again.

My text messages are not going through to other iphone users. They are going through to other phone types though.

My text messages on my iphone5 (ios 7.1.2.) are not sending to other iphone users. This is a new problem. The messages send with no problems to other types of phones.

you don't. you tell her to turn off iMessage on her old iPhone

Calls are not getting thru in Cisco voice GW for a particular Number

Cisco gateway is connecte to a PBX with an Qsig interface, for a particualr destination number the calls are not gettin estabilished.
the output of the Q931 debug :
Aug 16 16:17:46.145: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x7E05
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98396
                Exclusive, Channel 22
        Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
        Facility i = 0x9FAA068001008201008B0100A11D0202010002010080144E455453202
F204C4F4E472044495354414E4345
        Calling Party Number i = 0x2183, '8168911010'
                Plan:ISDN, Type:National
        Called Party Number i = 0x89, '18553808521'
                Plan:Private, Type:Unknown
        Sending Complete
Aug 16 16:17:46.149: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xF
E05
        Channel ID i = 0xA98396
                Exclusive, Channel 22
Aug 16 16:17:55.709: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x
FE05
        Cause i = 0x80BF - Service/option not available, unspecified
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x7E0
5
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xFE05
The Qsig and dial-peer configration :
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad

Hi Raj,
My name is Edson Pineiro, I understand that your problem description is in regards to failed incoming calls from a qsig trunk.
According to the received q931 setup message I can see the called party number is 18553808521 and as so the gateway should route the dnis based on the best match in destination-pattern. My first suggestion would be to ensure your outgoing dial-peers has a matching destination-pattern that matches the dialed number, for example:
dial-peer voice 1 voip
destination-pattern 1T
The T is a wild card for any digit any length
Or you can be very specific.
dial-peer voice 1 voip
destinaton-pattern 18553808521
The next suggestion would be to ensure that your incoming pots dial-peers contains 'direct-inward dial'. This is so that you don't receive secondary dial tone when dialing in, which I don't think is happening here.
Another suggestion would be to remove 'isdn overlap-receiving' from interface serial 0/0/0:23. Reason being is that the DNIS received is enbloc and not overlapping. You can clearly see that the complete e164 number is received within the setup and no further digits are needed.
But overall the disconnect cause code is 0x80BF the 80 portion is related to the source of the disconnect which is the router and BF "Service/option not available, unspecified" which is described as:
The network or remote equipment cannot provide the service option that the user requests, due to an unspecified reason. A subscription problem can cause this issue.
Any ways seems like the router does not support the protocol or type of message included in the Setup. After decoding one of the facility message:
        Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
decode -->
Facility IE first byte (protocol profile): 0x9f(Network Extentions), depends on Network Protocol Profile
**Note:
**0x91/0x9f both be used by older qsig spec, including:
**ISO 11582:1995, ETSI 300 239:1993/1995
**newer qsig spec use 0x9f only, including:
**ISO 11582:1995/Cor.1:1999, ECMA 165(4th), ETSI 300 239:2003
**see CSCeb58118 for CCM compatibility issue
NetworkFacilityExtension ::= {
sourceEntity: 0
destinationEntity: 0
NetworkProtocolProfile not present
APDU is a ROSE
0
DivertingLegInformation2Invoke ::= {
invokeID: 1793
operationValue: 21
argument: DivertingLegInformation2Arg ::= {
diversionCounter: 1
diversionReason: 1
originalDiversionReason: 1
divertingNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
originalCalledNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
redirectingName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
originalCalledName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
Looks like this is a redirected call (call forward or transfer), the redireted number is "50005998" and the other end of the PRI maybe attempting to do either a 2 B channel transfer or B channel optimization, which is not supported certain gateways or needs the use of a tcl scripts. Any ways is it possible to confirm if such features are enabled on the other end of the qsig trunk? and what the number 50005998 is assigned too. This may warrant a TAC case.
However please ensure your carry through the first three configuration changes before looking at the possible bad facility message.
Here are some good documents on ISDN, IOS dial-peers and call legs:
Understanding debug isdn q931 Disconnect Cause Codes
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
Configuring Telephony Call-Redirect Features
Two B-Channel Transfer
http://www.cisco.com/en/US/docs/ios/voice/ivr/pre12.3_14_t/configuration/guide/ivrapp.pdf
Understanding Dial Peers and Call Legs on Cisco IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
Understanding Direct-Inward-Dial (DID) on IOS Voice Digital (T1/E1) Interfaces
http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00801142f8.shtml
Understanding Inbound and Outbound Dial Peers Matching on IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#prereq
Voice Translation Rules
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Let me know how you go.
Thanks again for asking the tuff questions.
Cheers
Edson

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

Mails are not going

Hi Experts,
I have developed a RFC to approved leave, this RFC will send mail to required recipients. After executing the RFC, when we check into the TCODE: SCOTT mails are sending properly. While the same RFC calling from .NET mails are not going.
Please let me know any kind of configuration required in .NET or Share point.
Please do the needful.

Hi,
Refer below links.
Mails are in "Waiting" status in SCOT
Mails not send in SOST
Regards
Durga

Outgoing calls are not going on my iphone 3gs....

Similar Messages

Maybe you are looking for