Outgoing calls to new number "Ends"...

Hi,
    I use a Nokia Lumia 800 with an Airtel Connection. If I make a call to any new (unknown) number, the call ends instantly. If I save the same number (to some name eg. ABC) in my phone & call ABC from my contacts, then it is working fine... Anybody facing the same problem....? Can anybody suggest a solution...

Sorry I didnt get back to you straight away, I actually fixed this problem by issuing the following commands on the pots dial peer in question.
progress_ind setup enable 3
progress_ind alert enable 8
Also something strange about the progress_ind alert enable 8 command, you have to type in the full command for it to take, if you do progress_ind ? to list options, alert is not listed as an option.
Thanks for help and interest anyway.

Similar Messages

  • DECT phone outgoing call issue

    Has anyone had issues with DECT phone outgoing calls -  My new BT Studio 3500 can receive calls ok, but dialling out returns "this number is not recognised" - using my old analogue phone and it suffers no such issues.  Is there something up with my phone line - I have ADSL connected, this works fine with microfilter and analogue- even when I disconnect the ADSL line the DECT phone still has an outgoing call issue.  I even replaced the DECT phone with a another model previous, but the issue still remains. 
    Im not contracted to BT but go via TalkTalk, and just want to find out if I am setting the DECT phone up incorrectly!

    So rather than try and troubleshoot your problem, or take the phone in to have it checked by Apple for a hardware fault, you're just going to wait for something to magically change... OK, then.

  • Cisco 3905 failed but outgoing call still ringing on mobile phone

    Dear all,
    We setup Cisco Call Manager 10 with Cisco Voice gateway 2911 ( E1 port) and 3905. All outgoing call & incoming call are ok. But we meet a small issue as below:
    -Using 3905 do outgoing call to mobile number. Mobile number ringing.
    -3905 failed without power but the call still ringing on mobile phone.
    Anyway to fix that ?
    Thank you & regards,
    ThànhNT

    Hello,
    So, your config looks good.
    Pelase, can you explain what you mean when you say:
    "-3905 failed without power but the call still ringing on mobile phone."
    You can try a "debug isdn q931" on your gateway and see if the disconnect is ok. Use the documentation bellow to understand the debug:
    http://www.cisco.com/c/en/us/td/docs/ios/12_2/debug/command/reference/122debug/dbfipx.html#wp1018126
    If the disconnection is good, you will need to understand your call flow.
    Phone -> CUCM -> Gateway -> PSTN -> Called Party
    The final disconnection point is provided by your telco, and it can send the disconnect late.
    Please, let me know the result of the debug.
    best regards.

  • Can verizon track down why we get so many misdialed calls to our number?

    Within the last year or so, the number of calls we're getting that are misdialed has become ridiculous. We get more "wrong numbers" than real phone calls, and it seems to me that there must be some illegal activity going on behind them.
    These calls are always from people whose caller id names show up as being Hispanic, and most of the time if we don't answer within a couple rings, they hang up before the answering machine even gets to pick up. And on the occasions when we do pick up quickly, they either hang up immediately or are clearly surprised that we answer in English. The few-ring hangup makes me wonder if our number is close to some popular drug-dealer - why else would people hang up if they don't get an answer by the 3rd ring?
    While I'd rather not have to change my number, I'd at least like someone at Verizon to see if they can figure out who these people are really trying to call, and maybe let the intended recipient know their "friends" aren't so good at getting in touch with them... and potentially getting the authorities involved if there's something illegal being carried on. Or maybe get the intended recipient of these calls a new number (assuming they are also with Verizon) if I've had my number longer than theirs.
    Or should I just take to "mis-dialing" the phone numbers I'm getting in my caller-id log and hanging up on them, randomly, at all odd hours like they've been doing to us?

    You can call Vz Unlawful Call Center at 1-800-518-5507. There you will be able to find out what Vz can do to help you get rid of these calls. This is likely only open during business hours.
    Hope this helps.
    Larry
    Verizon Telecom
    Vz Voice Portals & Connection Wizard
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Change iPhone number for outgoing calls from mac (Yosemite)

    I have two iPhones, and one of the iPhone is set for iPhone cellular calls (handoff) in macbook under FaceTime preference. How to change this number so that I can make outgoing calls from different iPhone?

    Hi,
    If you Erased the Drive  and set up the computer anew it will depend on how you migrated/imported your Mac User Account (if you even did).
    Mostly the process will make the Mac seen as a "New" computer.
    In some cases this will means settings that involve some sort of "pairing" will not work.
    You may also get to the point of having 5 "devices" linked to iTunes because of this.
    I have  G4 that is coming up on 121 years old.
    It has 4 drive bays and some of the drives are partitioned.
    It will boot into OS 9 and every version of OS X up to and including Leopard (OS X 10.5)
    I have tended to Clone the current set up and then Update the main Drive.
    It does mean though that iTunes counts them all individually.
    On top of that I have a Snow Leopard MacBook Pro and my current Yosemite booted iMac (It also has Older OSes on External Drives)
    The outcome is that you might have to re-link the two devices.
    9:38 pm      Friday; January 2, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How can i hide my extension number when i make outgoing calls

    Hi All,
    How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
    Regards,
    Lester

    We use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.

  • When a contact gets a new phone number, I delete the old and enter the new.  Then when I text or call the old number shows up as a selection yet it's no longer under the contacts info.

    When a contact gets a new phone number, I delete the old number and enter the new number.  When I try to text or call, both the old a new numbers. One up as a selection choice, even though the old number is gone from the contact.

    That's normal behavior as the old one will remain in the memory cache for a while until it's eventually overwritten.  If it's particularly bothersome to you, you can restore your phone as NEW and this will empty the cache.

  • When I receive a phone call from a new number, how do I save that number to my contacts?

    When I receieve a phone call from a new number, is it possible to save that number from the incoming calls screen? Can I create a contact from the number itself without having to go to the contact list and write the number in manually?

    Thank you so much. I feel like an idiot for not figuring that out on my own, it is so simple.  But I really, really appreciate this. Thank you!!!

  • TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

    Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
    I`ve tried restarting, rebooting, nothing works.
    The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

    Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/.  . The more people that bring this to their attention the faster it will get fixed

  • I just changed my number.  How do I keep my new number private from unwanted call/texts?

    I just changed my number.  Is there anything I need to do to make sure unwanted calls/texts do not get my new number?

        Hi mbco, I have another suggestion! Do you have access to My VZW? You can set up call and text blocking from unwanted numbers. Use this link for the details http://vz.to/RZXLNr.
    Thank you!
    EdW_VZW
    Follow us on twitter @VZWSupport

  • HT204023 My husband and I have different phone numbers for our business; however, we need a way to keep track of incoming and outgoing calls on both phones.  By the end of the day, our phone has deleted several numbers.  How can we locate those deleted nu

    My husband and I have separate phone numbers for our business but need to keep track of incoming and outgoing calls; however, by end of day many numbers have been automatically erased from our phone.  How can we find those deleted numbers?

    I believe the total amount is 100 calls that will list.
    No way of changing that.

  • I hve unlocked iphone and got walmart family mobile. I was issued a phone number initially with phone and then I had them change it. Now when I send texts caller id people see is the original phone number, and when I call it is the new number.

    I have unlocked iphone and got walmart family mobile. I was issued a phone number initially then asked for a different one. Now when I send text messages, they show up the original number, but when I make phone calls, the id shows up the new number, I can recieve text messages to both numbers. If you try to call the first number it says it is not a working number. On my phone, if I go under "about" it says "my phone number" and it says the second number, under settings, and messaging, it says that I send and recieve messages from the original one. T-mobile, has no idea why this is happening and has tried everything to fix it

    This is for iMessages only, not for text messages as in SMS/MMS.
    Settings > Messages > Send & Receive > Apple ID.
    Select your Apple ID and at the menu window that appears, select Sign Out.
    Turn iMessage off at Settings > Messages > iMessage.
    Then follow these instructions.
    You can remove an iPhone from your support profile by following these steps.
    Step 1: Click on this link to open the login window of your support profile.
    Step 2: Log into the website using your Apple ID – same as your iTunes login.
    Step 3: Click on the button ‘Edit products’ and select the iPhone that you want to remove from the list.
    Step 4: Click on the arrow behind the product, and then click on the button ‘Unregister’ to delete the iPhone from your support profile.
    After you unregister your iPhone, on your iPhone go to Settings > Messages > iMessage and turn iMessage on.
    Go to Settings < Messages > Send & Receive > Apple ID. Sign back in with your Apple ID.
    This should re-register your iPhone with your Apple ID with iMessage with the new phone number only.

  • Cannot connect outgoing call to one specific cell number on the Verizon network.

    Cannot connect to a specific number with an outgoing call.  The call goes to voicemail after first ring.  Can call the same number on a different phone with no problems.  Is there a setting I accidentally activated.  I have been able to call the number in the past. 

        @Newmie,
    I appreciate reaching out to us regarding the calls going through. I can understand how this can be an inconvenience to you. Please complete a soft reset by holding down the power button and home button simulataneously. If you still run in to issues with the call again please ensure that the contact information is correctly entered. We want to ensure that you are able to reach this particular contact number.
    YosefT_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Prevent called party number changes on outgoing call to PSTN

    Hello Folks,
    we have CUCM 9.1 with SIP trunks to cisco 2951 connected to the PSTN either by BRI or PRI module.
    we have implemented internal full e.164 (including +) dialplan
    when    we do an outgoing call (via SIP trunk and 2951) the phones first  shows   the full e.164 number i.e. +4970366431002. As soon as the call  goes  out  to the PSTN, the display changes to the number format in  which the  2951  sends the call to the ISDN.
    Because in  ISDN  there  is no +, the gateway translates the called number to (in  this  example)  70366431002 TON national. and sends this back to CUCM in  the  Session  progress Remote-Party-ID value (see output from debug  on the 2951 below)
    how can we prevend that the phone is showing this number instead of the original number?
    thanks a lot - mat
    debug isdn q931
        Calling Party Number i = 0x1081, '497142500290'
            Plan:Unknown, Type:International
        Called Party Number i = 0xA1, '70346431002'
            Plan:ISDN, Type:National
    debug ccsip  messages:
    Sent:
    SIP/2.0 183 Session Progress
    Via: SIP/2.0/TCP 10.1.60.2:5060;branch=z9hG4bK3b5c02cb10b0d
    From: <sip:[email protected]>;tag=3018449~a209bda8-de62-43dc-9e6a-6ebfafc31bde-46236303
    To: <sip:[email protected]>;tag=ED03BF44-10BA
    Date: Mon, 02 Sep 2013 12:41:56 GMT
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    Allow-Events: telephone-event
    Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
    Contact: <sip:[email protected]:5060;transport=tcp>

    Hi,
    any calling or called transformation in the route pattern appears in the screen.
    you can discard the 9 in the route pattern and add prefix 9 in the route list level.
    for the 2nd point there is a service parameter in the call manager to keep the original dialed number
    HTH
    Anas
    don't forget to rate the helpful posts

  • Outgoing calls disconnects using new SIP trunk

    Hi,
    i have a lync 2010 setup. all calls (until now) are going through isdn lines. a few days ago i have configured a sip trunk to use. i have configured new dial plans and voice routes for this.
    the issue is that when i call an external number the call is not established. if i click redial usually the call is connected fine. incoming calls are working just fine

    i got this from the logging Tool:
    TL_ERROR(TF_PROTOCOL) [1]070C.083C::10/02/2014-09:53:35.314.000001a9 (MediationServer,GatewayCall.GatewayParticipateComplete:gatewaycall.cs(1740))(0000000002446616)$$START-MEDIATIONSERVER
    MediationCall: 3ff4fd37c1dc4083bc2a12218476c925
    CallId: 005e2a14-9630-4f2e-b9ad-9f22d8d67c5d
    From: sip:[email protected];user=phone
    To: sip:[email protected];user=phone
    Direction: Outbound
    Start-Line: FailureResponseException: ResponseCode=503 ResponseText=Service unavailable
    Microsoft.Rtc.Signaling.FailureResponseException:A 503 (Service unavailable) response was received from the network and the operation failed. See the exception details for more information.
       at Microsoft.Rtc.Signaling.SipAsyncResult2`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.SipAsyncResultBase2.EndAsyncOperation[TResult](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Signaling.SignalingSession.EndParticipate(IAsyncResult result)
       at Microsoft.RTC.MediationServerCore.GatewayCall.GatewayParticipateComplete(IAsyncResult ar)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Signaling.FailureResponseException..ctor(String message, Exception innerException, SipResponseData responseData)
       at Microsoft.Rtc.Signaling.RealTimeException.GetWrappedRealTimeException(String message, SipResponseData responseData, Exception exceptionToWrap)
       at Microsoft.Rtc.Signaling.SipTransactionAsyncResult`1.ProcessFailureResponse(SipResponse response)
       at Microsoft.Rtc.Signaling.SipInviteAsyncResult.ProcessFailureResponse(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    i get the 503 service unavailable... which i find strange. because first outbound call ALLWAYS fail and the second always succeds

Maybe you are looking for