Outgoing emails problems & no email notification

Hi
I really hope someone can help me as my N900 was working perfectly before it was returned to Nokia for repair.
When I send an email from my handset it goes straight to the outbox & says failed next to it. A few seconds later I receive an error message saying STMP authentication failed. Check user name & password or that you have access to Smtp.live.com.
Also, to see if I've received an email I have to manually press send & receive.
I would be really grateful for any help.

Sometimes, I had this issue with Mail for exchange and i was not able to send emails from N900. So i went ahead and reinstalled the phone firmware and went through the email configuration set up again, now all seems to be working fine.
Maybe it helps
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

Similar Messages

  • OIM 11g - Email Notifications configured in human task is not working

    Hi,
    My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
    Sender Addresses = <[email protected]>
    Default Sender Address = <[email protected]>
    Outgoing Mail Server = <Exchange server host>
    Outgoing Mail Server Port = 25
    Outgoing Mail Server Security = none
    Outgoing Default From Addr = <[email protected]>
    I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
    However when a request is assigned to the user, email notifications are not sent.
    I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
    Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
    Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
    Regards
    Deepa

    Hi,
    My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
    Sender Addresses = <[email protected]>
    Default Sender Address = <[email protected]>
    Outgoing Mail Server = <Exchange server host>
    Outgoing Mail Server Port = 25
    Outgoing Mail Server Security = none
    Outgoing Default From Addr = <[email protected]>
    I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
    However when a request is assigned to the user, email notifications are not sent.
    I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
    Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
    Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
    Regards
    Deepa

  • Problem in attaching a xml file in Email Notification

    Hi,
    I am new to BPEL. I am using 10.1.3.4 Jdev. Facing a problem in attaching a xml file in Email Notification process. I do not get any email when ever the attachment is a xml. Whereas when the attachment is a pdf, i get the pdf in the mail. I have put the mime type as text/xml. Used ora:doc() to read the xml. Dont know what i am missing. Please help me out. Thanks.
    Edited by: friendsforever on Oct 6, 2010 1:05 AM

    actually i want that when a user open my website register form then he must attached their resume in it
    so i want to know how can i make a field of attaching.
    please reply
    I am waiting for your reply

  • HP Officejet Pro 8600 - Problem adding new Outgoing Email Profile

    I went in to the HP Utility to add an Outgoing Email Profile  (OEP) with an email I didn't already have setup on the printer.
    It would not let me create the new OEP, with a different email than those I had already setup.  When I clicked on "save and test" it said "Incorrect Credentials".  So I tried to create another new OEP but with an email addr the same as an existing OEP.  I input the SMTP password and Pin and when I hit the "save and test" it returned "Incorrect Credentials".  Then I input the same SMTP pswd and PIN on an existing OEP, with that same existing email addr, and I got the same results.  So now my existing OEP didn't work.  I then did the same on an existing but different email addr and it worked; this was using the last one I had added about 6 months ago.  
    It seems like two different email addresses that I had previously added have a different SMTP pswd, and the third email addr has the SMTP pswd I was using.  However, when all of this started, the email addr I was initially trying to use to create the new OEP hadn't been used yet?  So why would it already be expecting a certain pswd.
    Is there a way to find what the pswd should be for an existing OEP?  How would I reset the pswd?  How would I create an OEP with an email addr I hadn't yet used (ie: no pswd)?
    John

    Hi Max3, I am having the same problem.  Did you ever find a solution?

  • Problem in sending Email notification from BPEL

    Hi,
    i am trying to send email from BPEL using Email activity.Using SoaSuite10.1.3.3
    i configured the ns_emails.xml file properly as below.
    when i run the process, it is executing fine without any error.
    but i am not receiving any mail.
    even i applied patch set p6148874 also.
    below pasted is the ns_emails.xml file.
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>Oracle BPM</FromName>
    <FromAddress>[email protected]</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>domain.com</SMTPHost>
              <SMTPPort>25</SMTPPort>          
    </OutgoingServerSettings>
    <IncomingServerSettings>
    <Server>domain.com</Server>
    <Port>110</Port>
    <Protocol>pop3</Protocol>
    <UserName>ckommalapati</UserName>
    <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Chandu@1205</Password>
    <UseSSL>false</UseSSL>
    <Folder>Inbox</Folder>
    <PollingFrequency>1</PollingFrequency>
    <PostReadOperation>
    <MarkAsRead/>
    </PostReadOperation>
    </IncomingServerSettings>
    </EmailAccount>
    Even i tried adding <AuthenticationRequired> details to the above and its not working.
    i restarted the server after modifications.
    i tried pinging the SMTP server of my domain, and its connecting successfully.
    Could any one suggest me the solution for this problem.
    is there anything extra need to be configured for this..?
    Thanks in advance.

    Hi, ravigali :
    Following are some steps I take to set Email notification in BPEL:
    A important thing: get the right parameters of your Email server.
    Step:
    1. Alter ns_emails.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory), an example is as following:
    <EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
    EmailMimeCharset=""
    NotificationMode="EMAIL">
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>*Your Name*</FromName>
    <FromAddress>*Your Email: ***@***.com*</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>*mail.***.com*</SMTPHost>
    <SMTPPort>25</SMTPPort>
    </OutgoingServerSettings>
    <IncomingServerSettings>
    <Server>*mail.***.com*</Server>
    <Port>993</Port>
    <Protocol>IMAP</Protocol>
    <UserName>***@***.com</UserName>
    <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">***</Password>
    <UseSSL>true</UseSSL>
    <Folder>Inbox</Folder>
    <PollingFrequency>1</PollingFrequency>
    <PostReadOperation>
    <MarkAsRead/>
    </PostReadOperation>
    </IncomingServerSettings>
    </EmailAccount>
    </EmailAccounts>
    Note: the detail explain of every XML element is in http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref324 (2.2.1 Configuring the E-mail Server)
    2. Add the following property to wf_config.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory):
    <property name="oracle.bpel.services.notification.publisher_interval" value="1" />
    Then the BPEL server will send notification every 1 minute. More detail about this configuration to see http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/notif.htm#sthref1678 (14.2.1 Reliable Notification Service).
    3. Re-start all SOA Suite services. (opmnctl startall)
    After the BPEL process invoke any E-mail notification activity and if we can’t receive any E-mail notification, we need to check the BPELNOTIFICATION table (ORABPEL database schema). And delete any error data in this table, then correct the E-mail notification setting through above steps and re-start all SOA Suite services.
    Thanks,
    Melody

  • LMS 3.2 DFM email notification problem

    Hi,
    I got a problem in a newly installed LMS 3.2 with the DFM email notification.
    I can see the alerts appering on Alerts&Activities, but DFM would not send any emails.
    I can get emails from other moduls of LMS. CS sends me emails from successfully backups.
    The SNMP Server works fine. The settings are ok.
    I already reinstalled DFM.
    I have seen a thread exists on supportforum.cisco.com with the same problem.
    (https://supportforums.cisco.com/message/3033101#3033101)
    Maybe anyone have the answer to this problem.
    Thanks,
    C8-Netzwerk

    This looks like an issue I am currently tracking.  I have written a patch which should correct this.  You can get the patch by opening a TAC service request, and having your engineer contact me directly.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • Email notification problems

    Used to be the email notification appeared in my outlook in box and then disappeared when the message was delivered. Now it just stays there and also appears in my 8830. How can I fix this problems? Thanks.

    This is the notification that is also appearing in the blackberry:
    -----Original Message-----
    From: [email protected]
    [mailto:[email protected]]
    Sent: Saturday, August 02, 2008 07:05
    To: Dale Brown
    Subject: [NEWSENDER] - RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2 -
    Message is from an unknown sender
    This message is used to carry data between the BlackBerry handheld and
    an associated server. Please do not delete, move or respond to this
    message - it will be processed by the server.
    BEGINETP 10
    A4kFAAAAAAAAAQ!!
    ENDETP 505820133

  • For about two weeks I have not been getting my email notification, I have to go in to the mail app and retreive them manualy.Anyone else having this problem?

    For about two weeks now I have not been getting my new email notifications, The only way that I can retrieve them is to go into the mail app and get them manualy.
    My question is; Is there anyone else having this same problem?
    "yahoo is my email provider"

    jcrash2000 wrote:
    My question is; Is there anyone else having this same problem?
    "yahoo is my email provider"
    Judging by the number of other threads on this, yes many people have been having Yahoo mail issues with push, and it appears to be on Yahoo's side, not Apple's.

  • I there a problem with email notifications?

    Hi.Since yesterday morning, I am no longer receiving email notifications through my email provider regarding new postings on threads that I've commented on in this forum, although I can still see them under my profile on this website.I haven't edited my preferences or my spam controls but they don't appear in the spam either.Anybody experiencing the same?

    You're telling me! I made the mistake of clicking on "receive email notifications" for every community so ended up with about 300 emails! But of course it was a website problem, not my settings.To top it all, as soon as I deleted all the emails, the Wi-Fi on my W995 decided it had enough and couldn't even find my router in the same room.I've just handed it in for a warranty repair (hopefully) as it's less than 3 months old and no amount of troubleshooting (update service, soft reset, hard reset,update service no 2, phone repair and update service no 3) could fix it.They say it comes in threes....

  • Outgoing email problem with Gmail via ATT

    I'm posting this on behalf of my mom, who's at her wit's end with her Mail program.
    She has AT&T DSL service, and uses Gmail for her mail. Also, she's running 10.5 on a Macbook. We've tried fiddling with things every since she got the system in the spring, but she's consistently had trouble connecting to the Gmail server, especially regarding outgoing email. Most of the time it takes forever for a message to send, if it ever sends at all.
    I use Comcast and Gmail and have never had any problems, which leads me to believe that this may have something to do with ATT(/Bellsouth). Any guidance would be greatly appreciated!

    I have same problem with Apple Mail at ATT as ISP. I used the program ATTYahoo!EmailSetup from their website. Now I can rarely send any email, from my work email or from my MobileMe email. I seems like that program messed up the entire Apple Mail client so it can no longer send mail. Emails I try to send just sit the in Outbox. Does anyone have a solution?

  • Problems with outgoing email

    I have problems with my outgoing email from my Icloud account. Ingoing emails are working fine. This problem started after I changed my HD. Any suggestions of what to do?

    http://www.apple.com/support/mail/
    has a setup guide to test your settings
    http://support.apple.com/kb/TS3276
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons#/?tagSet=1386
    You probably thought you were here:
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Problems with outgoing email on Y!Mail

    The first week I used my free Yahoo email on the E61i I was fine. It's strange that I'm able to receive email from Yahoo, but I'm unable to send email out. I've tried everything from:
    Outgoing:
    smtp.mobile.mail.yahoo.com (worked for awhile)
    smtp.mail.yahoo.com
    smtp.next.mail.yahoo.com
    I have 2 questions regarding this problem of mine...
    Could the problem be from T-Mobile or Yahoo or perhaps both?
    If I purchase Yahoo Mail Plus will I be able to send emails?
    I'm trying not to use a third party email since it's not push email capable...so please help me.
    thanks in advance,
    jennifer

    It worked for a while with the first server adress? is the ports correct?
    usually if the server your using is not "open" you have to use your operators server for outgoing email. witch will send the mail first via your operators server and then trought your email.
    i could be wrong here tho

  • Problem with outgoing email and 1.0.1

    Outgoing email seems slower, especially with SSL enabled. I am configured with IMAP to exchange, BUT use smtp.dslextreme.com for outgoing. The email will send out but it will take over a minute. I did not have this problem with 1.0 and I had the same configuration with 1.0.

    Well, i decided to use my gmail account for my outgoing smtp configuration and that works great, and with ssl. So i am going to say my problem is with dslextreme and use google for outgoing now. Thanks Apple, this phone kicks ***.

  • Outgoing email problem solved

    Several people have reported that after they switched to Yosemite, they can still receive emails on Exchange but they can't send emails. The problem may be attempting to send an email with a corrupted address. In Mountain Lion, attempting to send an email on Exchange with a corrupted address would trigger a warning saying the email cannot be sent. On Yosemite, there is no warning. The email with the corrupted address is held in the Outbox and all subsequent outgoing emails queue up behind it. It would save people a lot of time if Apple reestablished the warning. In the meantime, keep an eye on your Outbox.

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Outgoing email problem message.

    My incoming email works fine but when i reply to send an outgoing email i keep getting the following message with any email i receive.
    " cannot send mail. one of the recipient addresses was invalid"
    i checked the addresses. everyone is correct and works when sending from my macbook. any suggestions??

    When I set up my new phone my e-mail provider bellsouth.net was set up for me via Itunes. I had the same problem in which I was able to receive e-mails but not respond to them. Dummy me called att and they got me over to a Iphone expert, or so called expert. He had me go through the standard re setting of all and later told me to delete the account. Once i began to set up the account from scratch it appeared he didnt know "jack" and hung up on me. So know in order for me to get the info back I need to restall all as new set up but still have have problem that I can not send mail. Anyone out there that has set up a bellsouth.net account from the add new account on the phone?

  • Server Monitor Notification will NOT accept an outgoing email address

    Hi folks. I have a new XServer Xeon. Everything is working great, except for one maddening issue: When I use Server Monitor and go to set up notifications, the "send to" field will NOT accept any input at all...whether it's a bonafide email address or just any old text typing. Nada. I can seem to enter all other info like the "from" field, and the buttons work....just can't add any addresses to send notifications to. Any ideas? I'm hoping this is a "duh" moment for me and not a real issue.
    Thanks!

    Daddy
    I have quite a few Xserve's (G4, G5) running Email notification from Server monitor without mail services running.
    It appears to be a problem with the new Intel's version of Server monitor, I cannot get SM to accept any email addresses either, it will also not remember other settings between launches.
    I have submitted a bug report with Appple through ADC on this.
    FYI if you setup lights out management on another IP on Xserve and connect server monitor to that IP from another machine you can add email addresses but when hardware events occur on Xserve no emails are sent!
    So IMHO server monitor V1.5 is broken right now, only good for manually monitoring the hardware.
    If I get an answer from Apple I will post it in this category
    Ed

Maybe you are looking for

  • Apple TV in "Not supported mode" on Samsung HLN467 TV

    I just got an Apple TV and I can't get it to show a picture on my (3-1/2 yr old) Samsung HLN467 DLP-type TV. The Apple TV is connected via Component video cables. I have tried Component 2 and 3 inputs on the TV, same result: "not supported mode" is a

  • Red error of a web template in Metadata Repository in TEST system

    This red error only occurs on our test system (maybe related to transport).  RSA1->Goto Metadata Repository page->Double Local objects under Activated objects in the middle frame -> Double click Web Template Name in the right frame, then can see two

  • Possible to batch share multiple clips?

    In Pro or Elements, is it possible to create clips and then export them in a batch? We've been using Final Cut Pro X, but it no longer does that (at least not in a way that is efficient for us). We've been capture video from a Canopus FW converter to

  • Lost Adapters in Adapter Monitor

    Hi, buddies, We've applied install guide SR1 and Release 3.0 SPS18. But in our adapter monitor, there's two adapter engine, both of which contain only the "JPR adapter" with green status and no other adapters. Anyone who can help us? B'Rgds,

  • About crystal reports

    I need to know about Web Intelligence;Crystal Xcelsius;Crystal Reports Could u please give me the explanation about these contents...