Outgoing mail addresses changed from default account to another account

I have Apple Mail set up to send mail from AT&T account. "Use only this account" is checked in Mail preferences for the AT&T account. Messages are addressed with the AT&T address as the sending address. However, mail seems to be going out with my Gmail address, e.g., mail sent to a listserv from the AT&T account with the AT&T address as the sending address are bounced by as unauthorized with the Gmail address as the sending address. I notice that responses to messages sent to individuals are being sent to my Gmail address also.
Anyone have any clues as to what's going on?
Thanks,

Hi,
In that case if you open the Preferences to the Accounts Pane and click on the STMP server item choose the Edit option at the Bottom.
Chose what should be the AT&T one and check the details it has are for the AT&T server.
In one case I deliberately use a different outgoing Server.
That's not to say though that the details of your Server and it's name match what you think.
8:15 pm      Tuesday; January 6, 2015
​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • E-Mail address change from location to location while traveling?

    Been using Airport extreme as a local network for a eMac and a steady G4. I read, in MacHome I think, a traveling couple was not receiving responses to sent E-Mails from various locations while on the road. Reponse was that because each location they log on gave a different address not recogized by recipents that they were probably trashing them unopened not knowing who they were from. Solution was to purchase a router, such as Airport, and log on through it at each location. This would always assure that the same address would be sent that friends would recognize. Is there something to this? We"re going to start traveling, retired, and plan to use the email to communicate with family and friends so would be helpful to know something about this address thing.
    G4, Sawtooth, 1G mem, airport   Mac OS X (10.3.7)  

    Thanks for the response Duane. Would your answer be the same when moving from wireless network to wireless network and our home service providers email server not recognizing the different IP addresses. I may be mixing apples and oranges here. Our problem is not knowing what we're mixing, apples or oranges.

  • Need to change outgoing mail address which is from an old account

    We recently switched to a new internet service provider, but the old address is by default still being sent as the outgoing (from:) address in the Mail application. Is there a way to remove that address? The problem is not with the service provider because I have been able to check the current valid inbox address through the service provider's homepage online. The problem must lie with a setting in the computer that has retained the old address as a default.
    Any help would be greatly appreciated.

    If you're sending from the new account, that address is the outgoing mail address, by default. Did you try deleting the server of the old account? It could be sending mail out through that server instead of the one provided by the new ISP, which would change the outgoing mail address.
    Go to Preferences > Accounts and select the new account; look near the bottom of the window where it says "Outgoing Mail Server (SMTP)" and check to be sure that is set to the server provided by your new mail provider. If it's not, you need to select the correct one from the pop-down list.

  • How can i change my e-mail address color from blue to black when i send a new message

    How can i change my e-mail address color from blue to black when i send a new message

    Hi Steven, if you send to yourself does it come through blue?
    Is this in the Header or a Signature?

  • How do I remove an obsolete e-mail address of a friend (not a whole account)

    People change their provider and get a new e-mail address. From some people I have 3 addresses but 2 are obsolete. I can't remember which ones. So I want to remove the old addresses, not a whole e-mail account.
    If I send a new e-mail to a friend and I have typed part of my friends name, I don't want to see obsolete addresses as options. I only want to see 1 correct address.
    If your answer is something like "Go to the Adress Book", please do tell me - exactly - where this Address Book is and how I will be able to edit and save it.
    I have Thunderbird 31.5.0.
    Thank you.
    Frans1.

    All suggestions come from your address books. You are going to have to find the old addresses and edit or remove then.
    You have two address books by default. The personal and the collected books. Check them both and any other books you may have created.
    There is a button to open the address book window.

  • How to use different mail address in "from" and "user" property?

    I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

    Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

  • How would e-mail address change affect forum?

    How company recently changed e-mail addresses for all the employees.  Both the format of the username and the domain changed as well.  Our old address will still work for 2 years before they wipe it out, but of course they want us to start using the new address now.
    Many websites, including NI discussion forums, use a person's e-mail address as the login name.  When the e-mail address becomes inactive, how does that affect my interaction on the discussion forums?  Obviously, I could still login using the old e-mail address.  But any e-mails from the forum for things such as subscriptions to threads would no longer work.  I could not find any place in my profile settings to update my e-mail address for subscription purposes.  Of course, I expect it to be difficult to change the forum login name since that would be my unique identifier in the forum.
    This shouldn't really cause me any problems for almost 2 years.  And I'm sure I'll have to deal with it on other websites that use your e-mail address as the login name such as sites that I purchase products from.
    Anyone else had similar problems with e-mail address changes?  It makes me wonder, if the new e-mail address is supposed to be better, why didn't they use the new format way all along.

    The profile is site wide and not specific to the forums. To change the email address associated with the user, click the MyNI link at the top of each page and then the Modify Profile link.
    Try to take over the world!

  • Several weeks ago I was forced to change my Apple ID when my e-mail address changed.  I spent several hours resetting all of my devices.  The new ID seems to be recognized everywhere except when I'm asked to enter it for app on my computer.

    Several weeks ago I was forced to change my Apple ID when my e-mail address changed.  I spent several hours on the phone with a tech resetting all of my devices.  The new ID seems to be recognized everywhere except when I'm asked to enter it for app upgrades on my Mac-Pro (10.8.5).  When I'm asked to sign in there, the old e-mail address is still shown and I'm unable to change it.  Suggestions?

    I was forced to change my Apple ID when my e-mail address changed. 
    There is no such requirement.
    You have created an additional Apple-ID, which is different from the one under which you purchased Items from The Mac App Store.
    Go back, log in under the OLD Apple-ID and Add an additional email Address there instead.
    Apple does not yet have a convenient way of combining Apple-IDs.

  • Can I transfer/migrate my mail address book from my old G5 OS 10.4.11 to a new Maverick 10.9.4 ?

    Can I transfer/migrate my mail address book from my old G5 OS 10.4.11 to a new Maverick 10.9.4 ?

    Thank you so much! I actually need help transferring my old address book with all my contacts and their e-mail addresses. I had trouble setting up mail so I used my internet provider's webmail to send and receive mail, but that is fixed now.
    If I have to manually enter each contact, I'll do that, but it sure would be nice if there was a way to transfer the address book.
    Thanks again.

  • Cannot change from default printer in Acrobat X by code

    pp.printerName = "\\\\print server\\printer"; works flawlessly in Acrobat 9 Standard but will not change from default printer in Acrobat X Standard unless run in the console. I've checked the printer names through the console and they are listed correctly. Javascript enable menu items is checked. I've even tried creating trusted functions (which still work flawlessly in Acrobat 9, but not in Acrobat X). All other printer settings in Acrobat X change as coded once the printer is changed manually.
    Any suggestions?

    function printFullPEng() {
    var pp = this.getPrintParams();
    var pSize = this.getPageBox("Crop");
    if (pSize[1] > "792") {pp.printerName = "\\\\print-server\\HP Designjet 4000 HPGL2/RTL (Copy 1)";}
    else {pp.printerName = "\\\\print-server\\TOSHIBA 4520C PCL6 - Engineering";};
    pp.NumCopies = 1;
    pp.pageHandling = pp.constants.handling.none;
    fv = pp.constants.flagValues;
    pp.flags = (fv.setPageSize);
    this.print(pp);
    This is tied to a menu button. As I say, it works flawlessly in Acrobat 9, but will not change printers in Acrobat X.

  • Fast_start_mttr_target has NOT been changed from default

    I did a raccheck on my new installed RAC nodes. OS is linux redhat, oracle version is 11.2.0.3.
    raccheck results has one : fast_start_mttr_target has NOT been changed from default.
    Our existing unmigrated system has not set up fast_start_mttr_target.
    Do we need to setup this parameter?

    The fast_start_mttr_target enables you to specify the number of seconds the database takes to perform crash recovery. You need to set optimal value.
    Refer below link before setting this parameter
    http://docs.oracle.com/cd/B13789_01/server.101/b10734/rcmtunin.htm#1008706
    Regards
    http://www.oracleracexpert.com
    Oracle Flashback Data Archive - Oracle Total Recall
    http://www.oracleracexpert.com/2012/06/oracle-flashback-data-archive-oracle.html
    Backup and Restore MySQL Database
    http://www.oracleracexpert.com/2012/06/backup-and-restore-mysql-database.html

  • Why is my iPhone getting the list of my e-mail address's from my computer?

    Why is my iPhone getting the list of e-mail address's from my computer?

    Oh! And 3 nights ago I ugraded my 3GS (this phone) to iOS 5.

  • How can I move purchased apps from one itunes account to another account?

    How can I move purchased apps from one itunes account to another account?

    You can't. The apps must be purchased separately.

  • How to move a report from one account to another account

    Dear all ,
    How to move a reports from one account to another account.
    These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
    Puru

    Hi,
    You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
    The data should be present in a Transport and you can import to Transport to any client using SCC1.
    Contact the Basis team to know how to use SCC1.
    Regards,
    Aj

  • Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

    Hi,
    Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
    The changes basically consist of adding several new MDS members which can be accessed via Excel.
    Thanks in advance,
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    In MDS terminology an Entity is metadata, and Entity Members are the data. 
    Typically changes to an Entity (ie model design changes) are promoted to different environments.  Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
    Adding, editing and deleting entity members is performed directly in each environment.
    If you want to selectively import data from a Dev environment, you can use staging.
    David
    David http://blogs.msdn.com/b/dbrowne/

Maybe you are looking for