Outgoing mail domain issue

I am getting a below error for one domain.users are sending the mail to this domain are getting softbounce with the error Reason:4.1.0 - unknown address error (451 Temporary local problem- please try later}
find error in detail in attachment.
want to clear this error on urgent basis as mails are not receiving to client.kindlyhelp someone on urgent basis.
I check the host status , it is showing up.also check the grep for domain IP, not showing any error, still the mail are soft bouncing.

Dear Sir,
I contact with the destination postmaster and replied the below logs for the issue.
I just want to verify on which end the problem is present.
2014-03-13 12:23:30 SMTP connection from (smtp.rblbank.com) [180.179.117.92]:63543 I=[119.18.57.70]:25 closed by QUIT
2014-03-13 12:24:04 H=(smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 sender verify defer for <[email protected]>: host lookup did not complete
2014-03-13 12:24:04 H=(smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 F=<[email protected]> temporarily rejected RCPT <[email protected]>: Could not complete sender verify
2014-03-13 12:24:09 SMTP connection from (smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 closed by QUIT
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <[email protected]>: host lookup did not complete
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<[email protected]> temporarily rejected RCPT <[email protected]>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <[email protected]>: host lookup did not complete
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<[email protected]> temporarily rejected RCPT <[email protected]>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<[email protected]> temporarily rejected RCPT <[email protected]>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <[email protected]>: host lookup did not complete
Regards,
Wajid

Similar Messages

Ipowerweb and outgoing mail server issues

getting my POP account on my iPhone to send mail successfully has proven to be difficult.
why is it that on my old Nokia E61 my incoming and outgoing mail server settings "mail.mydomain.net" worked regardless of whether i was on edge or wifi -- yet on my iPhone the only way i can send email is to turn wifi off, and input "cwmx.com" as my outgoing mail server and send sloooowly over edge?
i guess my question is, what is different about the way the iPhone connects to different servers, if my old phone did not have any issues with it at all - and how can i remedy this? shouldnt it be as simple as sycing the settings from my POP account on my G5? what am i missing here...and is this specific to ipowerweb hosting?
thanks

aegez,
As a point of clarification, if you are going to use Port 25 on EDGE you have to use cwmx.com. Many networks filter port 25 traffic because of port 25 traffic has been abused by people sending unsolicited bulk email (aka spam). AT&T's EDGE network is not the only network to filter port 25.
The iPhone in some situations will try other common ports, many of which will require authentication.
If you are using an outgoing mail server that requires authentication on a port besides port 25 it should work on both WiFi and EDGE in most situations. The exception would be on networks that filter traffic on all ports as a security major, such as some work environments.
This article includes more information on outgoing mail:
http://docs.info.apple.com/article.html?artnum=305634
This article indlues settings for some ISPs:
http://docs.info.apple.com/article.html?artnum=306074
Hope this helps,
Nathan C.

Outgoing mail server issue

I cannot send outgoing my mail from my email account. Its saying
two servers marked with
alert icons are in conflict and cannot be saved.
two servers cannot share the same address and authentication settings
. resolve the certificate and try again.
Ive delete the account now and re set them up but it still has an issue with the outgoing server which are the same .... Can anyone help?
jen

Is this MobileMe or dot Mac?
If so...
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

ICloud outgoing Mail server Issues

Have issues sending email from my Mac today - Outgoing mail server not found!
I can do from Safari/iCloud, but not MAIL? anybody else seeing this?
Bob D.

No
Sign out of iCloud (System Preferences>iCloud) restart and sign back in, make sure to turn on any services you require (Mail etc)

Outgoing Mail server issues

ooutgoing mail server issues. Rebooted phone, changed password, changed port everything and still no luck !!

Its something to do with my phone it's self. The exact details in another phone works !! Just can't figure it out.

Outgoing mail issue with my domain

All right I'll lay it all out in as much detail as I can...thanks in advance for any insight you can give me.
OS: Tiger 10.4.7 (latest security updates)
Mail ver: 2.1
I have three e-mail accounts: gmail, dot mac and my own domain.
As of right now, I can send outgoing mail through my gmail and dot mac accounts. My domain mail is dead when trying to send through Mac Mail.
Gmail settings:
SMTP: smtp.gmail.com
Port: 587
SSL: On
Auth: Password
Username: (myaddress)@gmail.com
Password: (mypass)
Dot Mac settings:
SMTP: smtp.mac.com
Port: 25
SSL: On
Auth: Password
Username: (my username)
Password: (mypass)
Domain settings:
SMTP: mail.(mydomainname).com
Port: Tried 25, 587, 110
SSL: tried both on and off
Auth: tried none and password
Username: Tried just my username and tried full with @(domainname).com
Password: tried Webmail pass and control panel pass
Again, I have no problems sending with the other two accounts. But I get "could not send message using server mail.(domainname).com" error message. This after the spinning wheel for about 30 seconds.
Now, both the incoming and outgoing server are mail.(domainname).com. I can receive messages through the account just fine. And I can send mail through my Webmail setup at my domain name, too.
I contacted my host (iPowerweb) and they set up a test account and said they are not seeing smtp issues, either.
I recently switched hosts and I was having the same issue with the previous host, too. In fact, I used to be able to send e-mail through my previous host with the same domain, but it just quit working one day.
I do not believe it is a port issue as I am able to send on both 25 and 587.
Previously I just accepted that I wouldn't be able to use Mac Mail to send through my domain. But I am unwilling to accept that fact anymore...
Any ideas folks?
Again, thanks...
PowerBook G4 Mac OS X (10.4.7)

Hello, and welcome to the Discussions.
Typically, Port 587 would require at least Password Authentication -- using None as Authentication would not be expected to succeed. If None is the correct setting, then Port 25 would be the necessary Port.
The fact that accounts in the same domain work, is not definitive, in my opinion, since it might be permitted without Authentication, whereas other sending activities might not.
Without regard to blocking, sending with a third party SMTP involves establishing "trust", and trust is either established by Authentication, or by being identified by the venue where your ISP can ensure you are trustworthy, and this typically must require the use of Port 25.
The change might be that as a Spam fighting measure, your ISP has only just now required authentication on Port 587, although I think this has already been nearly universal.
Ernie

Having problems with maverick and outgoing mail with domain name

hi
i just upgraded my operating system from mountain lion to maverick. i did a clean install on a new hard drive.
anyways, my desktop mac mini computer using mountain lion is having no problems with my outgoing mail with my domain name.
smtp.1and1.com
custom port 993
SSL
password
using the exact same info on my laptop with maverick
no dice.
mail comes in but can't email out with my domain name
i tried - smtp.1and1.com:(email address)
any suggestions
thanks
phil

Hi, Phillip Chin.
Thank you for the question. The article below will help you troubleshoot the issue that you are experiencing with mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jason H.

10.5.3 Outgoing Mail Issue

Greetings,
I recently updated to 10.5.3. Right after this was done I began experiencing issues with sending and receiving email. The error returned is as follows:
Cannot send message using the server X.
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
It's a POP account. I didn't change the name of the incoming mail server but I did change the name of the outgoing mail server by adding mail. to the front. I'm using Port 993 with SSL, with an Authenticated POP (ADOP) Authentication. I'm not as computer savvy as I'd like to be, so I'm sure I'm leaving out some details. Any and all assistance is much appreciated.
Cheers,
Jeff

You changed the outgoing server settings, or SMTP server settings based on what? In an attempt to fix the sending problem on your own, or based on an SMTP server settings change by the email account provider for this account?

UTORmail Outgoing Mail Issues

I have been having an issue where outgoing mail does not send. Each time I try to send mail, I recieve the error message, "Email Application Alert: Error sending "..." ". I contacted the utoronto tech staff and they are also confused as to why the setup is not working correctly. As there is no specific Palm Pre setup on their website I went by the Iphone settings, which should work correctly:
Setting up your UTORmail account
Tap Settings on the home screen:
Scroll down and tap Mail:
Tap Add Account:
Select Other (last option):
Tap IMAP:
Fill out the information fields as follows:
     * Address: Your @utoronto.ca email address
Incoming Mail Server
Host Name: mailboxN.utcc.utoronto.ca (where N is replaced with your UTORmail configuration number)
User Name: your UTORid
Password: Your Password
Outgoing Mail Server (SMTP)
Host Name: smtp.utoronto.ca
User Name: Your UTORid
   1. Scroll down and tap Advanced.
   2. The following screen will appear
Incoming Settings
Use SSL: ON.
Authentication: Password.
Server Port 993
Outgoing Settings
Use SSL: ON.
Authentication: Password.
Server Port 587
Any information on how to fix this would be appreciated.
Post relates to: Pre p100eww (Bell)
Post relates to: Pre p100eww (Bell)
Message Edited by bmirabelli on 11-03-2009 10:33 AM
Message Edited by bmirabelli on 11-03-2009 10:33 AM
Message Edited by bmirabelli on 11-03-2009 10:34 AM

Normally, if you send out using SSL, you use port 465, and if you send out without SSL, you use port 587. Can you try port 465?
== Edit ==
I found the University's instructions for various mail clients. The pattern seems to be SSL ==> 465, TLS ==> 587. If the Pre supports TLS, try switching the encryption method from SSL to TLS and using port 587. Any luck?
Message Edited by Jeffro on 11-03-2009 03:50 PM

Outgoing mail is failing in eM Client, authentication issues

I cannot send mail through eM Client, it fails and asks for credentials. Up until Friday eM Client was working fine, and nothing has changed in the configurations. I tested eM Client and gmail and it worked without an issue, using port 25, outgoing.verizon.net and not using a secure connection.
My wife is also having this issue on her computer using the same software as an email client. I would say it's the client, but it works fine with gmail, both sending and receiving.
Any help would be appreciated.
Thanks.

stjore wrote:
I am running the latest eM Client (Version 6.0.21040.0) and this problem appeared within the last week. eM Client incoming mail (POP) works fine but outgoing mail (SMTP) does not work. I spoke with Verizon Tech Support this morning, but was unable to resolve this problem. The eM Client SMTP settings that I'm using (and worked previously) are below:
Server
Host: smtp.verizon.net
Port: 465
Security policy: Use SSL/TLS on special port (legacy)
Authentication
Server requires authentication (checked)
Use identity credntials (not selected)
Use these credentatials: (checked)
User name: [email protected]
Password: **********
Enable Service (checked)
Unless you are a Yahoo user (which also uses different servers) do not use [email protected] Just use username

HT201320 Outgoing Mail Issue

My iPhone 5s kept shutting off on its own so the Apple Store gave me a new one. I cannot send outgoing mail because I have no idea what my original password is. The outging server is smtp.mail.yahoo.com. How can I resolve this issue so I can send outgoing mail? Thanks, KD

The only way you can send mail on the iPhone is by having your password. If you need to change your password you need to do that through yahoo.

How can i block outgoing mails to particular domain

I have just set a mac mini with snow leopard server . Configured mail in it . I want to block the outgoing mails to some particular domain or all domains other than my server domain .
please help

Hi Fritz:
Your English is FAR better than my Deutsch (Ich bin ein Wisconsonite). I can barely ask for the train to Zermatt (one of my favorite places on Earth).
Anyway, I think I understand your question. If you mean is there a way to stop the recipient of an E-mail from actually getting it (after you sent it), the answer is no (in Apple's Mail application). Entourage (a Microsoft application) is a good program. As I recall (I used Outlook years ago in my corporate world) the Microsoft mail applications have a feature to "un-send" E-mail). However, I think that only worked if the mail was sent to someone on the same network. You could not retrieve mail from someone outside your own network.
Barry

Dislaimer for all outgoing mails, excepting some domains?

I'm still trying to add a Disclaimer to all outgoing mails. Actually, I need some help to add such a Disclaimer to nearly all outgoing mails, excepting some specific domains and for the right syntax:
I know that I can add a message filter with the action 'add-footer' through CLI like this:
if (recv listener == "OutboundMail" AND (not only-body-contains ('some unique text from my company disclaimer'),1)
{add-footer('name of previously in GUI added dislcaimer-text');}
else
{ deliver();}
My questions:
a) How can I prevent such a Disclaimer for every recipient in the domain "@company-without-disclaimer.com"?
b) How should I write that for multiple recipient-domains without disclaimer?
c) Is it important to write the listener-name and the disclaimer-name in the above code with ' (single quote) or " (double quotes)?
d) Are the brace brackets {} set correct?
e) Should I enter the entire disclaimer-text for the body-scan? I'm not sure if our actually one is 'unique' - maybe other companies has the same or a very similar one. Should I add multiple parts to looking for? How do you do that?
Thank you for every help in advance!

I can't figure out how to add the NOT-command.
It works for me as written in my previous example.
And could you please tell me something to my other questions c), d) and e)?
"C" and "d" are very basic questions documented in the "Message Filters" section of the Advanced User Guide. Single or double quotes are both fine. The curly braces are probably OK as you've written them, but putting whitespace around them might be necessary (the docs don't say).
As for the disclaimer text, that's hard to get perfect. It depends on your threat model. If you just want to be reasonably well assured that it gets put in, then pick out some bit of the disclaimer that is unlikely to appear elsewhere and check for that. But if you want to make sure that your own people can't spoof the process by embedding that bit in a message in order to avoid getting the disclaimer (not a likely threat in my opinion), then you'd need to check for the whole thing. Depending on how long it is, it might be safer to check for it piecemeal rather than all at once. I really can't say since I've never tried this. Or you could just add the footer unconditionally. At worst, you'd only end up with multiple instances of the footer in some messages, and it would only be in those messages which pass through your ESA more than once.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Outgoing mail issue in SCOT

Hi All,
When we have an outgoing mail generated either by a program or the SAP Business Workplace the mails sit in the Waiting stage. They do not show up in SOST as well. And they are all sent together probably in the night as we can see the mails in our Inboxes! I am not sure why this is happening? We cannot blame the send jobs as the mails are being sent... Also the send jobs are configured and the SMTP server is configured. The mails are sent but not as soon as they are generated.
Any pointers to this problem will be greatly appreciated.
Best regards,
Sudhi

Sudhi,
Check the sent mail job frequency ? It might be running only once .. idle would be running this job every 15 mins or so
Thanks
prince Jose

Outgoing mail domain issue

Similar Messages

Maybe you are looking for