Outgoing mail server setup

Hello everyone,
I am having problems with setting up the e-mail response.
How do you authenticate the smtp server from FCS?
In the outgoing mail server, I put "smtp.broadband.myISPprovider.com" - string I got from them. There is nowhere in FCS to put user name and password for authentication.
The e-mail response does not even show in the "View All jobs" window like every other response.
I tried every flavor of the string, including the port :587 , my e-mail address and such with no luck.
What am I missing?
If anyone could help, please.
Thanks
Radek

Thanks Simon,
I've just spoken to Apple and sure enough, the outgoing mail needs to go through an open relay server for it to work. Well..., open relay servers are getting blacklisted by most ISPs because of all the spam. I also spoke to my ISP and they do not offer any open relay so I'm stuck. I don't want to leave our system vulnerable by going through some shady open mail server. Apple needs to figure out how to make the authentication possible from FCS.
Thanks again
Radek

Similar Messages

HT4864 The Outgoing Mail Server drop down box in mail setup keeps reverting back to 'None' - anyone have any ideas why?

Hi
I've been having difficulties with mail on my Mac and have checked all the settings. I have three mail accounts, 2 iClouds (different acct names) and 1 bigpond account.
Whenever I change the outgoing mail server drop down boxes for the iCloud accts and save my changes, I go out of it then when I go back to the iCloud accts the drop down boxes for both iCloud accounts have reverted back to 'None'.
Is this of any relevance? Is it 'normal'?
I've tried deleting all mail accounts and adding them all again but the same thing still happens.
I have been on Apple Support and followed the Mail Acct setup tutorial.
I'd appreciate any help on this matter thanks.

Thanks for your reply Winston Churchill.
Because I'd been having problems which had recently been resolved by AppleCare Support I decided to go through all my accounts and check their individual settings. I found a Tutorial on Apple support for setting up or verifying email account settings and found mine were different so I changed it.
In any event I took your advice and just went with the option of automatically setting the iCloud accounts up and I haven't had anymore problems thus far - fingers crossed.
I do however note that my drop down box in account settings still says 'none' for the outgoing mail server and the 'use this server only' check box isn't ticked despite being ticked in the 'verify account' info on the tutorial, so hence my question to the community - did this matter and what was the difference?
I will let sleeping dogs lie I think and will see how I go.
Many thanks for your help.

Mail Server setup - EM 10.2.0.1.0

On Mail Server setup (EM 10.2.0.1.0) doesn't exists the options to set the User Name and Password, for authentication.
How do I configure a user authentication for the SMTP server?

You have to provide valid values for only the follwing two fields:
1 Outgoing Mail (SMTP) Server
2 and Sender's E-mail Address
Optionally you cand enter something in the Identify Sender As that will be used in the email body as an alias for the email address.
It should work. I tested this a few moments earlier.

Outlook 2007 - Outgoing mail server from a 3rd party

I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy

Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM...

Outgoing mail server and WiFi Questions

DeepPurple23, thank you -- you solved my problem as well!
Can either of you tell me what's involved in choosing a Wi-Fi network? I'm trying to choose one, but don't know whether I'm DHCP, BootP or Static. DHCP is preselected, but then the only lines that allow me to fill in anything are DNS, Search Domains and Client ID. What should I put there? My IPS is earthlink, and I created a client id, but I'm not getting anywhere. Thanks for any help you can give.
Message was edited by: Host - branched to new thread for new issue

nakoma,
EarthLink should allow you to user their outgoing mail server smtpauth.earthlink.net on port 587 on WiFi or EDGE. Cwmx.com is a work around that only works on EDGE.
As for choosing a WiFi network. Do you have a wireless router such as an Airport Base Station?
If so, you would connect to it, and it connects to your internet connection. Many places offer free WiFi or WiFi that they charge for. This can include restaurants, coffee shops, libraries, and even some cities are experimenting with it. To join one of those networks go to Settings -> WiFi, turn WiFi on, and it will search for WiFi networks that are within range.
Click on the wireless network you want to join. If there is a "lock" next to it that indicates whoever setup that wireless router or base station, and is likely paying for it to connect to the internet set it up to use encryption and a password. You would have to ask them for permission to use their network and the password to use.
Hope this helps,
Nathan C.

I have been abroad and had to change my outgoing mail server to send mail.i am back in the uk and want to reset it back to home settings.how can I do this

I have been abroad and had to change my outgoing mail server.i am back in the uk and want to reset it.any ideas please

Delete the account and setup the mail account again.

Why has mail suddenly started saying that my outgoing mail server is offline?

Why has mail suddenly started saying that my outgoing mail server is offline?
I can receive mail from my ISP using Apple Mail but as of this morning I can't send via my ISP.
When I check Mail preferences, they say that my ISP's outgoing mail server is "offline".
I haven't changed any settings, so what's gone wrong? I need a fix. At the moment I'm having to use Gmail.

If your email is hosted by Google then there are several known issues with Apple Mail under Mavericks accessing Gmail. Using a web browser is a good backup. In Apple Mail you can goto the menubar, choose Mailbox and choose take all accounts offline. Then bring them back online. Worst case you may need to delete and readd the account (usually if something was setup wrong) Menu bar - Mail > Accounts.
If you have turned on 2 step Google Authentication then you'll need to issue a specific email password for Apple Mail to use to bypass authentication. Google the steps.
Best of luck in getting your mail server online. Hopefully you can specify multiple servers in settings.

TS1307 outgoing mail server (SMTP): offline?

I am able to recieve email but can send, getting message "username or password for [email protected] is incorrect.....went to mail and it's telling
me that 'outgong mail server (SMTP): offline.....how do I get it "on-line".....

Don't delete te old account yet.
I think they're slowing nudging people to the fact that MobilMe & .mac is going away shortly in favor of iCloudinees!
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password

What is apple's incoming/outgoing mail server for iphone 4?

I am trying to setup receiving email from my apple email address on my iphone 4.
what is apple's incoming/outgoing mail server for iphone 4? Thanks

For a MobileMe account?
If so, this is not needed. Use the MobileMe account preset and the incoming and outgoing mail servers will be set up automatically.

TS3988 No preferred outgoing mail server for icloud

Hi, I suddenly cant use my icloud account, it says I dont have a preferred outgoing mail server and it wont let me put one in, even if I knew what it was..! ? Please help..B

Go to apple >> system preference >> I cloud. Uncheck mail for a moment and recheck it. Or did you setup mail manually at some point?

Outgoing mail server issue

I cannot send outgoing my mail from my email account. Its saying
two servers marked with
alert icons are in conflict and cannot be saved.
two servers cannot share the same address and authentication settings
. resolve the certificate and try again.
Ive delete the account now and re set them up but it still has an issue with the outgoing server which are the same .... Can anyone help?
jen

Is this MobileMe or dot Mac?
If so...
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

HT1277 how do I find my outgoing mail server info for gmail account set up?

how do I find my outgoing mail server info for gmail account setup?

Most current Mac systems have a preloaded set of information and settings for the common email providers. Try just choosing gmail and enter your userid and password at the prompts and see if the preload configures correctly for you.

HT3228 hi..what setting work on iphone 4 - lineone mail server setup.. have tried Tiscali recommendations, which aren't beiong picked up..nightmare..!

hi..what settings work on iphone 4 - lineone mail server setup.. have tried Tiscali recommendations, which aren't biong picked up..nightmare..!
Used Imap, Pop mail..!

Thanks for the quick read and response. Do you feel the issue might lie with the fact that it is a Mac Mini? And possibly just not powerful enough to run Leopard Server? I have to say in our trials with MacPro it was like night and day as to how they performed. And if you could elaborate on this "Many VPNs don't play well with NAT so your VPN server should have a direct connection to the public network (preferably firewalled, of course, but not NATted)." Most every SoHo and for that matter uses simple NAT translation for security even our multi thousand dollar Cisco PIX and ASA's are basic NAT devices to start with. How would you put the VPN on public net while keeping the attack surface low for the rest of the services like file, web, mail and print?
Don't get me wrong I want this to work more than you can imagine. We are so tired of supporting MSFT technologies that cost thousands a year in antivirus, antispyware, antispam and other malware protection for the enterprise. We know that Leopard has great potential but for an integrator, getting this system up and functional is not an easy task. And the worst part of it is every time we have called for support the tech always lets out a sigh when they hear we have run standard setup because they are not allowed to walk us thru the server console to make repairs. And have been told by 3 techs so far that this is a new product and the support avenues are not there for standard since it just supposed to work out of the box. But when it doesn't then ohh well. Which is sorta sad...
DM

Sane virtual mail server setup?

I'm giving up. I want a simple mail server setup (imaps, pop3s, smtps) with virtual user support that I can comfortably configure from the web (PostfixAdmin, web-cyradm, courier-web). I want to manage multiple users on multiple domains. It appears that the task I want to accomplish is insanely complex for some reason. I'd like to use as few different software packages as possible.
I can't find a simple and sane tutorial on the topic and I don't even care what software is going to be used. Of course, I did search and play around with the config for hours but to no avail. The tutorials in the Arch wiki are no good either, they are either outdated or do not allow me to do web configuration.
Help me out here, please.

It's always good to have alternatives, but out of curiousity, did you not try the courier-mta wiki? I used that wiki guide recently and it had me running with a system like what you describe without too much fuss. The only stuff I haven't tried/used is web-based administration or mail access; perhaps this was the problem for you?

Can I set my iCloud email as the outgoing mail server for my google apps email account in Mac Mail?

I have a google apps email account from an old client, all my work emails have been going to it for years. As I'm no longer affiliated with this client I'd like to make a transition to using my iCloud account for work. I asked people to use my iCloud address but as they've been using my google apps address for years it's what automatically comes up when they type my name.
I figure the easiest way to make a transition is if I reply to all the emails that arrive at my old address from my iCloud address and gradually they will start using my new address without realising it. But I can't find a simple way to do this.
In Mac Mail preferences > accounts > Google IMAP (my old account name) > Account information > Outgoing Mail server (SMTP) I'd like to set my iCloud SMTP server. But although my iCloud account uses its own outgoing mail server for its own account , it is not in the server list when I select my google account. I've tried to add it to the server list as smtp.mail.me.com but it caused my whole iCloud account to give me error messages until I force quit Mail...
Any ideas?

In iCloud/Mail, have you tried going to Preferences (select with gear at lower left)/Composing and setting a Send from address there?

Outgoing mail server setup

Similar Messages

Maybe you are looking for