Outgoing/offline mail server errors (143 /and/ SSL checked?)

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

Similar Messages

  • Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Have you tried deleting the account and re-adding it on the phone?
    What version of Exchange server are you running?

  • What is the outgoing (SMTP) mail server for iCloud?

    What is the outgoing (SMTP) mail server for icloud?

    dominic23:
    That's just the name/description you can give the server that appears in Mail's preferences for that account.
    After selecting Edit you can put in whatever you want in the description. 
    advisor81:
    Why do you need to know the name?  If you add an iCloud account in Mail all you really need is your Apple ID and password.  The servers are automatically assigned.

  • Oops... a server error occurred and your email was not saved.

    after completion of mail content when try to send the message error shows as
    "Oops... a server error occurred and your email was not saved."
    This problems are being experienced very often since installation of Firefox version 5.0

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Mail Server Error - 21055: auth: Error: od?

    Hi,
    Just upgraded to OSX 10.8 Mountain Lion, now my email services have gone AWOL.
    The server logs are telling me  [DateTime domain.com] log[21055]:auth: Error: od (username, ip address): authentication failed for user=me, method=DIGEST-MD5
    From a client (MS offlook) point of view I'm getting :
    Your message did not reach some or all of the intended recipients.
    Subject:    test
          Sent: 06/08/2012 19:09
    The following recipient(s) cannot be reached:
          '[email protected]' on 06/08/2012 19:10
                451 4.3.5 <unknown[ip address]>: Client host rejected: Server configuration error
    This used to work quite well with Lion and the Server Admin Tools.
    Is there anything I can try?
    Thanks in advance,
    Jeff.

    Thanks for getting back to me red shift, everything is now up and working again. 
    I think it was somthing to do with some folder permissions and some mail settings.  The mail server GUI supplied with Mountain Lion is all but useless and didn't help in any way in tracking down or resolving the problem. So, I've taken the plunge and set up MailServ for Mountain lion, its a much better mail server GUI client, and seemed to correct some of my postfix settings.
    I've tinkered a bit with command line mail stuff, but not quite at a level where I can fully administer it.
    Are there any good command line resources out there?  This is somthing I need to improve on.
    Cheers.

  • When I open Thunderbird it always ask mail server password required and than several times i have to enter password. I have 30 emails.

    When I open Thunderbird it always ask mail server password required and than several times i have to enter password. I have 30 emails. They select email randomly.

    Hey there Sharon47.
    Couple of things that I see when I read this.
    1 - If you have tried to reset your password (and it says that mail has been sent) my guess is that your spam or junk folder may have it on Gmail? That's assuming your old email account (earthlink) is still forwarding to your new (Gmail) account.
    2 - Make sure your Firefox versions are up to date on the devices.
    Also,
    Here's a couple of support articles which may help you with syncing and
    https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync
    https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
    Hope this helps!

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green.

    When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error."  When I check the iCloud status, all is Green.  What is the fix?

    Hi spillgar,
    If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/ts3988
    iCloud: If you can’t sign in to iCloud.com
    http://support.apple.com/kb/ph2611
    Regards,
    - Brenden

  • TS3276 Inadvertently deleted Outgoing SMTP Mail Server.  Entered correct Yahoo email SMTP info and now SMTP is "Offline".  Can't SEND emails.  Help!

    Inadvertently deleted SMTP Outgoing Mail Server address.  Re-entered correct mail service provider's address and now have '(Offline)' tagged on server name.  Can't SEND any emails.  When I try, message will not send but goes into Outbox and sits.  How can I get this SMTP address 'Online'?  Help!

    For whatever reason Yahoo blocked access to their mail servers from Apple Mail in the past couple of days. I deleted my Yahoo account in Apple Mail and tried to add it back. NO JOY.
    Today, Yahoo has reopened their servers so that I could add my Yahoo account to Apple Mail again successfully. Even w the second app password.
    The problem was at Yahoo. Apple Mail people were either blocked or knocked off from their Yahoo servers for a time. This may happen again as it has in the past. I hope it doesn't become a frequent happening.

  • Windows Mail server error 501

    Every time I foreword an address or web page etc. using the "File" E-Mail Link the following happens. The e-mail is sent but there are five old error messages shown below. The e-mail goes trough but I have to hit the [close] box to clear the sent message. I can't figure out how to remove the old rejected e-mail addresses.
    Here is a copy of the message.
    The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
    The rejected e-mail address was '*****@picturetrail.comAccount:2051017:return'. Subject 'Account:2051017:return', Account: 'Dave's Mail', Server: 'smtp.att.yahoo.com', Protocol: SMTP, Server Response: '501 Syntax error in arguments', Port: 465, Secure(SSL): Yes, Server Error: 501, Error Number: 0x800CCC79

    This has nothing to do with Firefox. Mail is being rejected as you have set up your mail in a wrong way with incorrect ports etc.. Please contact the appropriate people for this issue and not here.

  • Mail Server Error

    Hello,
    I have checked to activate SMTP in Server Manager.
    Ben when I want to add : enable inbound email, it takes a lot of time to save, the checkbox uncheckes itself, and in the system.log, I have this error :
    May 27 20:45:13 tmachinix servermgrd[13357]: Exception in doCommand for module servermgr_mail: *** -[NSCFString appendString:]: nil argument
    May 27 20:45:13 tmachinix servermgrd[13357]: --request was {\n    command = writeSettings;\n    configuration =     {\n        imap =         {\n            configdirectory = "";\n        };\n        postfix =         {\n            "enable_smtp_in" = 1;\n            "virus_db_update_enabled" = 1;\n        };\n    };\n    optionalArguments =     {\n        parameters =         (\n            "imap:configdirectory",\n            "imap:enable_imap",\n            "imap:enable_pop",\n            "imap:enable_pop",\n            "imap:enable_quota_warnings",\n            "imap:enable_sieve",\n            "imap:imap_auth_clear",\n            "imap:imap_auth_cram_md5",\n            "imap:imap_auth_gssapi",\n            "imap:imap_auth_login",\n            "imap:imap_auth_plain",\n            "imap:log_level",\n            "imap:lmtp_luser_relay",\n            "imap:lmtp_luser_relay_enabled",\n            "imap:lmtp_over_quota_perm_failure",\n            "imap:max_imap_connections",\n            "imap:notification_server_enabled",\n            "imap:notification_server_address",\n            "imap:notification_server_username",\n            "imap:notification_server_password",\n            "imap:notification_server_port",\n            "imap:partitions",\n            "imap:partition-default",\n            "imap:pop_auth_apop",\n            "imap:quotawarn",\n            "imap:quota_custom_error",\n            "imap:quota_custom_warning",\n            "imap:quota_warn_frequency_days",\n            "imap:servername",\n            "imap:tls_server_options",\n            "imap:tls_cert_file",\n            "imap:tls_key_file",\n            "imap:tls_ca_file",\n            mailman,\n            "postfix:always_bcc",\n            "postfix:always_bcc_enabled",\n            "postfix:auto_learn",\n            "postfix:bayesian_enabled",\n            "postfix:disable_vrfy_command",\n            "postfix:enable_smtp",\n            "postfix:enable_smtp_in",\n            "postfix:enable_smtp_out",\n            "postfix:enable_var_mail",\n            "postfix:enable_virtual_domains",\n            "postfix:full_reporting",\n            "postfix:log_level",\n            "postfix:log_rolling_days",\n            "postfix:log_rolling_days_enabled",\n            "postfix:luser_relay_enabled",\n            "postfix:mailbox_transport",\n            "postfix:black_hole_domains",\n            "postfix:maps_rbl_domains_enabled",\n            "postfix:message_size_limit",\n            "postfix:message_size_limit_enabled",\n            "postfix:msg_body_checks_enabled",\n            "postfix:msg_header_checks_enabled",\n            "postfix:mydestination",\n            "postfix:mydomain",\n            "postfix:myhostname",\n            "postfix:mynetworks",\n            "postfix:mynetworks_enabled",\n            "postfix:mynetworks_style",\n            "postfix:reject_invalid_host_enabled",\n            "postfix:reject_unknown_host_enabled",\n            "postfix:reject_non_FQDN_enabled",\n            "postfix:reject_unknown_client_enabled",\n            "postfix:reject_unauth_piplining_enabled",\n            "postfix:relayhost",\n            "postfix:relayhost_enabled",\n            "postfix:smtp_sasl_auth_enable",\n            "postfix:smtp_auth_relay_dict",\n            "postfix:required_hits",\n            "postfix:safe_reporting",\n            "postfix:smtp_reject_list",\n            "postfix:smtp_reject_list_enabled",\n            "postfix:smtp_body_checks",\n            "postfix:smtp_uce_controlls",\n            "postfix:smtpd_pw_server_security_options",\n            "postfix:spam_action",\n            "postfix:spam_domain_name",\n            "postfix:spam_log_level",\n            "postfix:spam_notify_admin",\n            "postfix:spam_notify_admin_email",\n            "postfix:spam_ok_languages",\n            "postfix:spam_ok_locales",\n            "postfix:spam_quarantine",\n            "postfix:spam_rewrite_subject",\n            "postfix:spam_scan_enabled",\n            "postfix:spam_subject_tag",\n            "postfix:strict_rfc821_envelopes",\n            "postfix:smtpd_helo_required",\n            "postfix:text_only_attachments",\n            "postfix:tls_server_options",\n            "postfix:smtpd_tls_cert_file",\n            "postfix:smtpd_tls_key_file",\n            "postfix:smtpd_tls_CAfile",\n            "postfix:virus_scan_enabled",\n            "postfix:virus_action",\n            "postfix:virus_scan_enabled",\n            "postfix:virus_db_update_enabled",\n            "postfix:virus_db_update_days",\n            "postfix:virus_db_last_update",\n            "postfix:virus_notify_admin",\n            "postfix:virus_notify_admin_email",\n            "postfix:virus_notify_recipients",\n            "postfix:virus_notify_remote_recipients",\n            "postfix:virus_quarantine",\n            "postfix:virtual_domains",\n            "postfix:group_expansion",\n            nil\n        );\n    };\n}
    (END)
    And if I want to use the assistant to configure the email module, I get this error :
    « NIL_RESPONSE_ERR (*** -[NSCFString appendString:]: nil argument) » during « writeSettings »
    Please, help me.

    Hello arnobeck, I would start with the basics, can you receive emails?
    Everything bellow refers to settings under the mail service.
    Are your Domain and Host names set to what you want? - General tab
    Make sure Kerberos or CRAM-MD5 are checked. - Advanced tab
    Check you have certificates selected for both SMTP SSL: and IMAP and POP SSL:. - Advanced tab
    Check the certificates match the domain name set in the General tab. - Advanced tab
    P.S. I'm not the most advanced with mail server service, but hopefully I can help.
    Regards,
    Graham

  • Apple El Capitan Beta 4 won't save outgoing POP mail server

    Oops... it's actually El Capitan beta 10.11 that I'm using. And I should also add that I've carefully copied the ingoing and outgoing ports and SSL info from GoDaddy, and as many times as I've typed all that in, I'm sure that not every effort contained a typo. I also went into Mail settings, per someone's suggestion, and changed "false" to "true" in the line: "allow unsecured...". It didn't seem to have any effect.

    Using the new Apple Mail program in 10.10 beta 4, try as I will, as many times as I will, checking then unchecking "Automatically detect..." (suggested by someone else), when I try to add my GoDaddy outgoing mail server to the list of those available, when I "save", and then go back, it's gone. Time after time after time. I can receive e-mail just fine, so I know I'm hitting GoDaddy's "pop.secureserver.net" just fine. It's hitting "smtpoutsecureserver.net" that I can't do, because I cant get this version of Mail to save the dang thing. HELP!!!!
    This topic first appeared in the Spiceworks Community

  • Suddenly unable las 36 hrs to access yahoo mail server on iPad and iPhone. What is going on, how to fix?  Have tried resetting mail accounts to no avail.

    Unable to access yahoo mail server on iPad suddenly last 36 hrs.  Can anyone assist?

    lomago
    Hold off on purchasing stuff. I got my problem solved going through Apple Support for free. I'll try to walk you through this but bear in mind I've only done it once with an Apple Tech Support manager on line.
    Basically you have to clear your keychain. Go to Finder Menu, Select Go, select utilities, select Keychain Access
    Once you are in keychain access you may have to enter a password to unlock the keychain
    Once unlocked, select preferences and then reset my keychain.
    This is where I am fuzzy on what we did but as I recall that was all that was necessary with respect to the keychain access.
    Save the changes
    Go to the mail program, delete your existing account
    Add a new account
    De-select the option to automatically set up your account (VERY IMPORTANT)
    Enter your email account info for @me.com
    On the incoming mail server page
    Enter the account type as IMAP
    Enter the account description as iCloud
    Enter the incoming mail server to imap.mail.me.com
    on the outgoing mail server page
    Enter the account description as iCloud
    Enter the outgoing mail server to smtp.mail.me.com
    Check use only this server
    And your problems SHOULD be solved
    If I were you, before messing with the Keychain stuff I'd try editing the incoming and outgoing server address in the mail program first to see if that's a shortcut.
    Good luck!

  • HT201320 what is the incoming mail server host name and user names

    Hi there,
    I am trying to add my school email account to my phone and I am able to fill in the
    Name
    Email
    and Description
    but am not sure what I am supposed to fill out in the Incoming Mail Server spots:
    Host Name
    User Name
    and the password is already filled in?
    and Im not sure what the Outgoing Mail Server is either.

    You'll have to ask someone at your school what the incoming server settings are for their email.  These differ for every email provider/account.

  • HT1338 outgoing e-mail server not working since upgrade to mountain lion

    unable to send mail on one of my e-mail accounts since upgrading to mountain lion

    I had this problem as well after upgrading to 10.8.
    For all e-mail accounts SMTP servers seemed to be unavailable to Mail, regardless of setting TSL/SSL on or off. It turned out, even Thunderbird was unable to send any mail.
    After trying every hint on this forum twice – and to no avail; I found the culprit to my problem. Upgrading my iMac to Mountain Lion had changed the name, that my machine was using in my home network. The new machine name had "(2)" added to the old name. The brackets seem to have disturbed the SMTP servers I use. After changing the name back to anything w/o special characters I was able to send mail again.
    Very strange, since no error message lead to this direction, and only the SMTP was affected, everything else on the internet worked like a charm.
    So if you run into this problem, and no other solution works for you, make sure your LAN-name is not including any special characters, just letters, numbers and "-".
    Mind you: the name I am relating to is not necessarily the one you give your Mac in System Preferences > Sharing. It is the name your home router derives from that name. I am using a Fritzbox as a router and DSL modem; and had to access its web interface to check the actual name that my iMac was using to communicate to the web. That's also where I had to change the name back again.
    Don't know why ML caused the name to change in the first place, maybe the whole thing was unrelated and purely incidental to upgrading to 10.8. Using another router your mileage may also vary. You may still give it a try.

Maybe you are looking for

  • LIKE, LIKEC and Index usage

    I've table that contains about 20 million rows, and I've created index for varchar2(100) column. It works well if I do SELECT * FROM MY_TABLE WHERE MY_COL LIKE 'FOO%'; But if I change query to use LIKEC (to make unicode escaped strings work): SELECT

  • 9.2 convert ASCII to UTF8 welsh language

    hello I have a 9.2 ascii database that i cant convert to UTF8 yet 1 for an output (util file) i need to convert an ascii text string to utf-8 on export 2 i have two characters that are not supported by ascii, ŵŷ the users will represent these by typi

  • Reinstalling adobe illustrator cs 5 preferences without reinstalling the whole package

    Someone in one of your forums said that on a Mac to revert all my Illustrator prefs back to the defaults all I had to do was start the program while holding down Shift/Opt/Ctrl/Command .. when I did that we lost ALL of our items in the window palette

  • "virtual drive" on mac?

    I have a RAID and XSAN 1.2, and I want to create a "virtual volume" similar to using the MOUNT command in Windows, where a volume (aka "drive letter" in Windows) actually points to a folder within a real volume. I've been looking into Symbolic Links

  • Essbase Applications through EPMA - Advantages and Disadvantages over EAS

    Hi, Does anybody has any documentation highlighting the Advantages/Disadvantages of EPMA over EAS Console for Essbase Applications. Thank you Ashok