Outgoing Payment analysis by Project ID

Experts,
Wondering if anyone has a query written which can analyze a list of outgoing payments from the Project ID on the AP Invoice line items of the invoices included on the outgoing payment? I have seen some amazing queries out here and just thought I'd check. Thanks in advance,

Hi Delen......
You have posted the same Question twice. Please close one of the two.....
You can check this one also......
Go to Financials> Financial Reports> Accounting--> Transaction report by Projects.....
Regards,
Rahul

Similar Messages

Vendor Payment Analysis - How much is paid/ how much to pay ?

Hello Experts,
                        I am trying to work on Vendor payment analysis where i have to identify how much amount has been paid to a perticular vendor and how much is to be paid analyzing the PO information. I also know that for a perticular vendor the PO created will either hit a cost centre (hardware vendor) or a wbs ( service provider or consulting vendor) .
      If someone has worked on it and give me some suggestion it will be great help.
   I have identified that i can use 2LIS_02_ACC-Purchasing data account level for getting PO header and item detail but here how will i identify Open and closed POs.Is there a flag field please let me know
Similarly can i use New gl ledger 0FI_GL_14 to identify which are open PO and which are closed. I would also like to know if these 2 datasoruces be able to fulfill my needs.
regards,
Aero

Thanks Satya/Durgesh
                                     For the valuable information.One last question related to the scenario is about reporting based on Cost centre and WBS element for a vendor. A PO for a perticular vendor will either hit a cost centre(hardware vendor) or a wbs (consultants for a project) element based on product/ or services offered by the vendor.
I was thinking of using below mentioned extractors :
Cost Centre : 0CO_OM_CCA_9 ( Actual Costs Using Delta Extraction)
WBS element : 0CO_OM_WBS_6( Actual Costs Using Delta Extraction)
WBS Elements:0CO_OM_WBS_7( Commitment Line Items)
WBS Elements: 0CO_OM_WBS_8(Budget Line Items)
BUT Problem with these extractor is it has vendor information but no PO related to those vendors. How should i solve this issue ?

Outgoing Payment in FICA( Cash & Bank)

Hi All,
Can anyone give idea about the above subjects.
Since i know how to post incoming payments.
In case if the customer paid overpayment or payment of security deposits.
Could anyone please give procedure with T.Code for this.
Thanks for your help in advance.
Regards,
RAM.

Hello,
In FICA, You make the Payments to the customers either
1. You have collected excess money from him
2. You have charged him excessively.
3. You have adjusted his bill resulting in payment to the customer
4. You want to pay him back the securtiy deposit
5. The customer is moving out ....net result being you owe him the money
6. Other reasons resulting in payment to the customer
In all the above cases, you have to REFUND the money to the customer....either through Bank or by cash or by Cheque...<it depends on your company policy>.....
For refund by Bank/ Cheque you can use T-Code FPY1.
For refund by Cash you can use either FPB0 or FPCJ <again depends on your project/co policy>
For payments by Bank /Cheque, you need to do the following settings
1. Define Own bank details
2.Define Bank user numbers for Payment medium
3.Define Payment methods <FQP1>
3.Define specifications for paying Co cd <FQP4>
4.Define accounts for payment program <FQC0: Posting area 1061>
5.Maintain bank selection
The path for above config is IMG\FICA\Business Transactions\Payments\Incoming outgoing payment creation.
For configuration of Cr Card payments,<Posting by FPB0>, You need to configure in IMG\FICA\Business Transactions\Payments\Payment cards\ Define Accounts for Payment card Institute & Define Specifications for Posting Settlement Document
For configuration fo Cash desk payments<FPCJ>, you have make the settings in IMG\FICA\Business Transactions\Payments\Processing incoming and outgoing payments Cash desk Cash journal
Hope this helps
Rgds
Rajendra

Selection of Distribution Rule in Incoming and Outgoing Payment

There is an option of selecting the distribution rule in Incoming and Outgoing Payment having transaction of Account type but the requirement is of having the selection of distribution rule having transaction of Customer and Vendor (Invoice wise and Payment on Account)

What is the purpose for distribution rules in Outstanding invoice list in incoming payment? I try to attach the analysis there and post incoming payment but it will not appear in Journal entries which defeat the main purpose.
The problem face by customer is that they had many outlets and finance department in HQ needs to monitor daily collection from each outlets.
The desired outcome by customer is:
Dr Bank [profit center=Outlet A]   XXX
Cr     Customer                                   XXX
Eventually print out reports in XLR as
                                 Outlet A     Outlet B    Outlet C
Bank                          XXX            XXX          XXX
Regards
Thomas
Edited by: Rui Pereira on Dec 4, 2008 2:15 PM

Table in SQL for Outgoing payments

Hi,
I am creating a SQL Statement to pull some information out regarding outgoing payments to the G/L and I expected to see the transaction lines in the RCT4 table but they don't appear.
Can anyone tell me which table this is stored in please?
thanks

Hi,
Outgoing payments table are OVPM, VPM1 etc.
Regards,
Jitin
SAP Business One Forum Team

I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

Hello,
I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
“The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
Could anyone please help me on this?
Salamat,
Cat

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Daily Outgoing Payment Report

Hello,
We have a Query shown below that allows us to view Incoming payments made each day to an invoice.
SELECT T2.CardCode [BP Acct#], T2.CardName [BP Company Name], T2.DocNum [Invoice #], T1.DocDate [Receipt Date], T2.DocTotal [Invoice Sum], T0.DcntSum, T0.SumApplied AS 'Paid to Invoice' FROM [dbo].[RCT2] T0 INNER JOIN [dbo].[ORCT] T1 ON T1.DocNum = T0.DocNum INNER JOIN [dbo].[OINV] T2 ON T2.DocEntry = T0.DocEntry WHERE T1.DocDate = '[%0]'
We would like to modify this query so that the last column of information shows the Outgoing payments made. Meaning, any amount of money that we owe a customer and therefore apply to their outstanding invoice or as a credit memo, etc.
Can someone show us how to do this modification?
Thanks!

Mike,
Try this, this is your query, and it works perfect on my DB
1) SELECT T2.CardCode BP, T2.CardName CompanyName, T2.DocNum Invoice, T1.DocDate ReceiptDate, T2.DocTotal InvoiceSum, T0.DcntSum, T0.SumApplied AS 'Credit to Invoice'
FROM dbo.VPM2 T0 INNER JOIN dbo.OVPM T1 ON T1.DocNum = T0.DocNum INNER JOIN dbo.OPCH T2 ON T2.DocEntry = T0.DocEntry
if this query give you results, the problem could it be in the WHERE clause "where T0.DocDate = '[%0]'
Because you are not inserting a valid value in the '[%0]', maybe you are writing a date that doesnt existe in the "Existing Values" buttom.
Slds,.
Esteban Martinez

Outgoing PAyment Report

Hi Experts..
In which table outgoing payment row level data stores. There are no row level data stores in both OVPM & VPM1 table.
Here I am clearing my point that I need a report in which I can show A/P Invoice, A/P Credit Memo & JE details in deiff coloums.
That's why I need the same. My client wants PLD in which he can differentiate all Open Invoices, Cr Memo & JE's.
Sry if I am not much clear.
Awaiting for kind reply.
Regards,
Ravi

Hi ...
Actually My vendors need a Deduction details on Outgoing Payments print layout. In basic PLD it is not possible.
They need Diff Amounts of diff. forms(deduction) like A/P Invoice- Post Date- doctotal, A/P Cr. Memo - doctotal, JE if any.
And they need it on Payment Advice Print Layout(Outoign payment). Then I thought to create UDF & set FMS on them & then set on PLD.
Plz suggest if you have better ideas. Every idea would be highly appreciated.
Regards,
Ravi
Edited by: RAVI_JHA_SAP on May 27, 2011 2:24 PM

Outgoing Payment Report - Bank Transfer

Does SAP Business One have a built in "Outgoing Payments report" that would display payments made via bank transfers?
Or the only option is to create a query?
Thanks,

Hi
How about checking at forum too.
Here is one of the query
Reg: Bank Transfer Repor
Thank you
Bishal

Open item management_part payment with partial clearing_post outgoing payment process open items

In this scenario of post outgoing payment process open items , i' m facing a error titled as below
The difference is too large for clearing
Message no. F5263
Diagnosis
A non-assigned difference exists for the specified clearing amount.
The difference for an automatic difference posting must not be greater than the difference permitted for the user, nor greater than the difference permitted for the tolerance group that is contained in the customer/vendor master record.
System Response
It is not possible to automatically charge off the difference.
Procedure
You can charge off the difference manually using the function "Clear differences". You define the upper limits for automatically clearing differences in the tolerance group assigned to the user.
Change tolerance groups for user
I gave the specifications in (OBA4 screen) i.e., change tolerance groups for users/employees are as follows
Amount per document : 9999999999
Amount per open item account item : 9999999999
Cash discount per line item : 10%
Permitted payment differences left blank
What else do i need to execute ?
Please aid me in resolving the error....
Thanks in advance,
Heamanthkkumar.

Hi,
it seems you want to make a partial payment of 15000, select the line item against which you want to make the payment. On the payment amount field put -15000 and then simulate. It will credit the bank account and debit you expense account. Pls refer the screen shot.
best regds
Subha

Error doing outgoing payment against A/P Downpayment Request

Hi,
I am working on SAP B1 8.8 PL00(evaluation version). While posting Outgoing Payment against A/P Downpayment Request,system displays following error message-'Invalid Account Code'. It happens for both the payment means-Check as well as Cash. In G/L Account Determination -Purchase Tab-General Tab I have assigned G/L account to 'Down Payment Tax Offset Account'. Also in BP Master following accounts have been assigned-1.Accounts Payable 2.Down Payment Clearing Account.
What could be the reason of the error?Please guide me.
Regards
Sudhir

Dear Sudhir Jadhav,
Apart from the accounts that you have mentioned there is also the Down Payment Interim Account in the General Tab of the Purchasing and Sales tab of the G/L Account Determination.
I have tested the creation of the payment for the Down Payment and at first I could not add it because of an account issue. When I added this account it worked.
Regards,
Marcella Rivi
SAP Business One Forums Team

Is there any way to cancel only 1 transaction in an Outgoing Payment?

Dear Experts,
If I have an Outgoing Payment that was already posted, and it consists of 100 invoices. Lets say one day I realized 1 of the invoice was posted wrongly, and I wish to cancel that invoice (with credit memo) and also from the Outgoing Payment. Is there any other efficient way where I can cancel only that invoice in the Outgoing Payment, without canceling the Whole Outgoing Payment?
Because, canceling the Whole Outgoing Payment will mean that I need to re-add the 99 invoices again in a new Outgoing Payment, which is very troublesome. Is there a way to do this? Or is there any efficient workaround this procedures.
Much Thanks in Advance for your advice.
Warmest Regards,
Chinho

Chinho,
You may post your request to the following forum, so that it will be a candidate to be developed in future version:
/community [original link is broken]
Thanks,
Gordon

Can FI-CAx be used for making outgoing payments to business partners

Hi All,
Can we use the installment plan in FI-CA for the outgoing payments to business partners. Our company has lot of lease contracts and these contracts have payments due to be paid on a monthly, quarterly, semi-annual, and annual basis. All these lease contracts are managed in SAP Real estate Flexible objects. We want to use FI-CAx for making payments to these contracts and hence we are looking for integration between FI-CA and RE-flexible objects.
From what I heard FI-CA is a receivables module and is not best suited for payables, so please let me know if we can use the outgoing payment plan and installment plan in FI-CA for making payments to business partners.
This is a bottleneck in our implementation. So please help me asap.
Thanks in advance. Points will be awarded to all the useful solutions.
Santosh

Hi Santhosh,
FYI my answers below
Can we use the instalment plan in FI-CA for the outgoing payments to business partners.
u2022I would say Yeah. ofcourse there is a way to do it provided you have created existing OI in Real estate in FI-CAX. This is because, weu2019d Refund money to the customer. In the same token I do not see any problem in paying monies to them!!!!
u2022You need to create your RE-FX contracts unto FICA as Contract Accounts <1:1 ratio>.
Our company has lot of lease contracts and these contracts have payments due to be paid on a monthly, quarterly, semi-annual, and annual basis. All these lease contracts are managed in SAP Real estate Flexible objects. We want to use FI-CAx for making payments to these contracts and hence we are looking for integration between FI-CA and RE-flexible objects.
u2022Assuming that you have your RE-Fx data unto FICA, next step is to configure Instalment plans < monthly, quarterly, semi-annual, and annual >.
u2022Next you create Instalment plans for the contract accounts <FICA> as required.
u2022Now, if you want to pay the amount, you need to attach outgoing payment method in Contract Account, Configure your Payment program.
u2022Now run your Payment Run <FPY1 =4.72; FPYS = ECC>.
u2022All the OI would be cleared. If you want to send the file to the bank, you can do so or you can also issue cheques.
From what I heard FI-CA is a receivables module and is not best suited for payables, so please let me know if we can use the outgoing payment plan and instalment plan in FI-CA for making payments to business partners.
u2022Look above.
OI = Open Item
Other points you need to consider:
1. Are the amounts in RE-FX consistent <equal through out the installment plans>?
2. Do you want to create separate Installment plans in FICA?
3. If yes, above should be helpful.
4. If not, identify an Interface between RE-FX and FICA.
5. What are your plans to close the Contracts in RE-FX once all the Installment plans are being paid in FICA?
6. Do you want to establish an Interface between RE-FX and FICA so that data would be transferred bt them automatically?
7.Is point no 6 one way or 2 ways <i.e RE-FX to FICA and vice versa>
8. What is the volume and frequency?
9.Other points if any
Does this helps?
Rgds
Rajendra

A/R Invoice - Create two outgoing payments

Hi,
We have issue here regading A/R Invoice Payment.
The A/R Invoice is $100, the payment is $200 with Interact card (Direct account payment) with $100 cash return.
The present does not work in B1; but will be developed in future release.
The present can be solved according to Peter Dominik, B1 Solution Management as follow:
Create two outgoing payments:
- payment to vendor (payment for his bill)
- payment on account reposting balance from Bank Account to some
PettyCash account (cash
withdrawal from bank account)
Now I need to source code for the present solution; because all SDK is 1 A/R Invoice and 1 Payment. Now we have to do 2 outgoing payments. We need your help for this solution.
Please find the code for one transaction below; we need 2 payment transactions.
Thank you,
Rune
oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
oPayments.Invoices.DiscountPercent = 0;
oPayments.Invoices.DocEntry = vmp_DocEntry_Int32;
oPayments.Invoices.DocLine = 0;
oPayments.Invoices.InvoiceType = SAPbobsCOM.BoRcptInvTypes.it_Invoice;//13;
oPayments.Invoices.SumApplied = vmp_Amount_double;
oPayments.Invoices.Add();
oPayments.CardCode = vmp_CardCode_string;
oPayments.DocDate = DateTime.Now;
oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
oPayments.TaxDate = DateTime.Now;
oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343";
oPayments.TransferDate = DateTime.Now;
oPayments.TransferReference = vmp_CardCode_string;
oPayments.TransferSum = vmp_Amount_double;
vc_Message_Result_Int32 = oPayments.Add();
if (vc_Message_Result_Int32 != 0)

hi Vitor,
I need a code sample for Peter's suggestion using the code I provided:
Create two outgoing payments:
- payment to vendor (payment for his bill)
- payment on account reposting balance from Bank Account to some
PettyCash account (cash
withdrawal from bank account)
Thank you,
Rune

Error at Outgoing payment and general ledger report

Hi Experts,
I am getting a error while opening Outgoing Payment and General ledger Report, Errors are : "Path Can not be Null, Parameter Name: Path" and "Error code: 100000004, Error: Unknown session" ,respectively.
These errors are only at a particular client machine.
Kindly suggest solution.
Thanks in Advance.
Ashutosh

Hi Jambulingam/Suraj,
I checked the by giving admin rights, also with different user login, but these errors come as and when they want, i have put in this system in observation and wil update this thread accordingly.
There is no citrix server.
Thanks for your reply.
Regards
Ashutosh

Outgoing Payment analysis by Project ID

Similar Messages

Maybe you are looking for