Outgoing Payment not allowed with witholding Tax 8.8

I am getting error "No Matching Record Found - PCH4 ODBC-2028" while making outgoing payment
in SBO 8.8
W.Tax applied on A/P invoice and showing correctly but error is coming while making payment against
this invoice.
What's wrong.
OPS

Hi Sanju,
I have tried both way:
(1) First  I created service Invoice and applying witholding tax... It calcualted TDS correctly.
      When I try to make payment against this Invoice, Outstand Amt showing correctly.
      But it does not allow me to add outgoing payment and giving error "matching record not
      found PCH4-ODBC-2028"
(2) I created service Invoice and not applying WTax. Even it is not allowing to make payment
      as same error is coming.
In gen practice, we have to deduct, TDS of all contractors. let me know some clue. I did setup
exactly as per guideline of How-To documents of SAP.
Any clue by any one
OPS

Similar Messages

  • Posting in foreign currency not allowed for external tax system

    Hello all,
    I created a purchase order for inter-company stock transfer. Then created a corresponding outbound delivery and goods issue using  VL10h and completed goods issue. Then I completed good receipt using MIGO. When I was trying to create a sales order I got this message "Posting in foreign currency not allowed for external tax system". What could be the reasons for this message.  The message number said FS885.
    One final note. I am able to create Billing document with manual batch number input in Delivery document item. But when I am using Batch split I am not able to generate invoice. Can anyone tell me what could be the problem here.

    Hi Samir,
    The Goods Received NI (Allocation Cost Account) need to be balaned in Local and System Currency as this is a Multi Currency account and these are the currencies that Business One will offer reports in.
    The Foreign Currency for this account is irrelevant as you can never get a balance in FC for a multi currency account, neither will you find any reports for this. 
    If the client insists you can create a manual Journal entry in FC only to correct this. Business One does not offer any functionality to correct the Foreign Currency in this scenario. (like Exchange Rate difference for Local Currency and Conversion Differences for System Currency)
    To do the manual JE open the form settings and the tab 'table', here untick the box 'From FC Field'. This will enable you to create a FC JE only.
    Hope it clarifies the issue.
    Jesper

  • RFC Function Module - Message Reference parameters are not allowed with RFC

    Hi,
    I’ve checked the Remote-Enabled Module radio button, declared Import and Export parameters using ‘Type’ typing and checked the ‘Pass Value’ in export and import parameters but I still receive message ‘Reference parameters are not allowed with RFC’ and not able to activate the function module.
    Am I missing something?
    Regards,
    ...Naddy

    Hi all,
                   I faced the same problem and solved it ,
    You have defined a reference parameter for a remotely called
      function module. However, only value parameters are allowed
      for this type of module.
      Procedure
      Change the reference parameter to a value parameter.
    Guys  pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
    Regards
    Krishna Acharya

  • Valuated project stock not allowed with customer stock.

    Hi,
    I am trying to create invoice correction request for credit with the reference of invoice
    the invoice data is not copying into sales order. I am getting the error "Valuated project stock not allowed with customer stock".
       My question is can we have any routine in copy controll to fulfill my requirement or do i develop a new routine?
    Thanks in advance.
    Regards,
    Narayana

    Hi
    Did you find any sloution for this problem?
    I am facing the similar error.
    Inputs will be helpful
    Thanks
    Regards
    DDP

  • SQL operations are not allowed with no global transaction by default for X

    Hi All,
    I am getting the above mentioned error.
    java.sql.SQLException: SQL operations are not allowed with no global transaction by default for XA drivers. If the XA driver supports performing SQL operations with no global transaction, explicitly allow it by setting "SupportsLocalTransaction" JDBC connection pool property to true. In this case, a
    lso remember to complete the local transaction before using the connection again for global transaction, else a XAER_OUTSIDE XAException may result. To complete a local transaction, you can either set auto commit to true or call Connection.commit() or Connection.rollback().
    I am developing a web application. I have jsp, servlets, JDBC classes.
    I am using DataSource and Connection pools.
    I am on WLS 8.1 sp3 and Oracle 10.1.
    Part of My Config file looks as follows:
    <JDBCConnectionPool DriverName="weblogic.jdbcx.oracle.OracleDataSource" KeepLogicalConnOpenOnRelease="true" KeepXAConnTillTxComplete="false" Name="AUMDataSource" NeedTxCtxOnClose="false" NewXAConnForCommit="false" Password="{3DES}AKRkWgdzXN8WrXSRtSvJ6g==" Properties="user=pibsrmgr;portNumber=1521;SID=pibsrdod;serverName=pibsrdod.dtu.mlam.ml.com" RollbackLocalTxUponConnClose="true" SupportsLocalTransaction="false" Targets="myserver" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:bea:oracle://pibsrdod.dtu.mlam.ml.com:1521" XAEndOnlyOnce="false" />
    <JDBCTxDataSource EnableTwoPhaseCommit="true" JNDIName="jdbc/AUMDataSource" Name="AUMDataSource" PoolName="AUMDataSource" Targets="myserver" />
    Any help will be appreciated.
    Thanks
    ---Radhe

    Hi,
    Regarding Transactions , the following link can helpful to you .
    Regards,
    Prasanna Yalam

  • ME013 Document type RD33 not allowed with doc. ca tegory B

    When I try to post an SC, i get the following error: ME013 Document type RD33 not allowed with doc. ca tegory B.  I am on SRM 5.0.  I have maintained config (V_BBP_TARGET_OBJ) to create a PO if info complete and I have set up BSA in the org structure as ECPO.  My SC has a source assigned and looks to be complete, yet the system seems to want to create a PR and it is having difficulty doing so.  Any idea on how to troubleshoot this error message?

    Hello Richard,
    I guess RD33 is a PO doc type in your R/3 system.
    In that case, that means your SC tries to create a PR, but with the PO doc type RD33.
    But you said that you defined BSA = ECPO. So where comes RD33 from ?
    Can you tell me what is RD33 in your R/3: PR or PO doc type ?
    And if you have any reference to RD33 in SRM ?
    Rgds
    Christophe

  • ME 013 Document type ZEBP is not allowed with doc. category B (Please check

    We are creating shopping cart with specific items using XMA catalogue ME013 message comes
    Shopping cart 0001008270 (Preq. 2900000012) : ME 013 Document type ZEBP is not allowed with doc. category B (Please check input)
    Is it related to PO Document type configuration in R/3!
    Document type ZEBP is not in table T160 (SAP Transaction Control) or Do I need to debug the BAPI_PO_CREATE1.

    Hi
    Which SRM and R/3 versions are you using ?
    Some related useful pointers ->
    Error: ME 013 Document type ECPO not allowed with doc. c ategory B
    Re: Shopping cart contains error
    Error: ME 013 Document type ECPO not allowed with doc. c ategory B
    Hope this will definitely help. Do let me know.
    Regards
    - Atul

  • Requisition doc. type RV not allowed with doc. type

    Using the tcode ME51n, I created an Outline agreement(Doc type RV) and when i go to ME31K to create a contract and select With Ref to Purchase requisition and enter the Purchase requisition #, I get the error message Requisition doc. type RV not allowed with doc. type.
    I tried changing the settings for doc types for contract, but it doesnt seem to be working. Any solutions will greatly beappreciated.

    This is the settings in PR: SPRO-MM-Purchasing-PR-Define document type
    Doc type: RV     Outl. agmt. requisn.     10     01     02     RVB     R
    once above is correct than
    select the doc type RV and click on the allowed item category
    where can see as below
    Item cat  Text item category
         Standard
    K     Consignment
    D     Service
    select the doc type RV and click on the Link purchase requisitio in left side
    MK     Quantity contract     M     Material unknown          Standard
    WK     Value contract          Standard                          Standard
    WK     Value contract     K     Consignment          Standard
    WK     Value contract     M     Material unknown          Standard
    WK     Value contract     W     Material group          Standard
    Now go to contract doe type
    you will see
    MK     Quantity contract     10     02     AZ          SAP     MKK
    WK     Value contract     10     02     AZ          SAP     WKK
    select any doc type and click on allowed item category
    here you would see
         Standard
    K     Consignment
    L     Subcontracting
    M     Material unknown
    D     Service
    than click on link purchase requisition by selecting doc type MK or WK
    RV     Outl. agmt. requisn.          Standard          Standard
    RV     Outl. agmt. requisn.          Standard     K     Consignment
    RV     Outl. agmt. requisn.          Standard     M     Material unknown
    RV     Outl. agmt. requisn.     K     Consignment     K     Consignment
    RV     Outl. agmt. requisn.     D     Service     D     Service
    once you have all this set up than you can create the contract based on the RV reqs

  • Outgoing Payments not populating any invoices for a vendor

    It seems I have an issue with Outgoing Payments after the turn of the fiscal year.
    I have vendors that have invoices due this month and when I enter their vendor code in Outgoing payments, none of the invoices appear. Here are the things I verified:
    All invoices have NO payment block checked - this is good
    All posting periods have the correct dates for all periods - including doc dates and due dates
    No periods are closed, I tried both closing period and unlocked as options
    Payment methods are correct including banking info
    The fiscal year is properly set in GL determination
    I have upgraded to 8.81 p09 to see if this was a patch issue
    Payment wizard does not even pull these vendors, though it does pull some and those all are due dates of earlier than Dec 2011
    I have tried changing the due dates to be Nov 2011on the invoice, but it still will not show the vendors in outgoing payments
    Nothing shows in the payment wizard for Non-incl. transactions
    Authorizations are correct and I am signing on using a manager log on w pro license
    This issue was not present until Jan 2012, all invoices were entered in Dec 2011
    Are there any other areas I am missing to look? Is there something in the tables that would flag these invoices to not show?
    Any idea what I can do?? HELP!!
    Edited by: Joanne Pencola on Jan 20, 2012 1:54 PM

    Hi,
    Check the detect query in the Note No. : 1041101.
    Also, check whether you detect any of the reported invoices in  the following detect query :
    SELECT t2.cardcode,T2.docNum, T1.docentry, T1.status, T2.docstatus,T1.reserved ,T2.reserve FROM
    pch6 T1 inner join opch T2 on T2.docentry = T1.docentry Where T1.reserved = 'Y' and T2.docstatus = 'O'
    and T1.reserved !=T2.reserve
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • N8 outgoing calls NOT ALLOWED

    Hello,
    I have a problem, not always but sometimes when I unlock keypad on my phone /Iam using a password lock/ and I try to make a call it says NOT ALLOWED. The incoming calls works without problem only the outgoing calls are NOT ALLOWED. After switching off and on its working. Any solutions about this? Thanks a lot-

    Hi cryoy,
    Are you able to send and receive SMS messages with no problem? If so, could you also put your SIM into another phone just to check that it is not your SIM/operator dropping out.
    Report back here.
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • When making vendor down payment, not allowing to enter bank charges

    Hi!
    When making down payment to vendor, need to be entered bank charges. But system is not allowing for the same.
    Regards,
    Mouryan

    Hi,
    check in FBKP whether bank charges gl assigned or not, if not, assign it.
    Otherwise you can post charges by debiting to the concerned GL.
    Regards,
    Dharani

  • Weblogic myrealm user not allowed with name "viewer"

    Hi,
    I am trying to create a user(from weblogic console) in myrealm with name "viewer" and I see that I am not allowed but I don't get any error.
    When I am creating it programatically from a java program and assign it to a role called "Viewer", when connecting to my application using this "viewer" username the only rolse detected by my application are authenticated-role and anonymous-role. The "Viewer" role is not seen.
    Are there any restricted words that can be used for a user in weblogic myrealm?
    Thanks
    Regards Corneliu

    Hi,
    Regarding Transactions , the following link can helpful to you .
    Regards,
    Prasanna Yalam

  • Ontouchstart not allowed with epubcheck

    We are using basic programing with xhtml and css to make an interactive epub book for the ipad.  We are not using ibookauthor.
    We want to have a button that will pop up a new window or frame on the page if it is clicked.  This window could have a new photo or text in it. We are following the directions in apple's epub guide 4.8 that indicated to use ontouchstart.   But our epub book fails the epubcheck for this feature.
    Epubcheck flags this as "ontouchstart not allowed here".  Is this a false positive on epubcheck? If not, what coding can we use to get new popup windows in ibooks and still pass the epubcheck?
    DRK5

    Whihc version ePC and which versio iTP are you working with?
    As well, you do know this is the iBooks Author specific forum, right ?
    Ken

  • Outgoing messages not working with POP e-mail account

    I am getting a strange message each time I try to send outgoing e-mail messages with my iPhone 3G. It says that my recipients e-mail address in invalid. I have tried multiple e-mail addresses and it always says the same thing when I try to send. My outgoing mail settings look like they are entered correctly and I am recieving e-mail just fine. Any suggestions?

    Hi. I was having the same problem with my Gmail/Googlemail account, which i've just managed to fix, by changing the port number for my SMTP server, as per Google's suggestion.
    Specifically, I changed my SMTP port number to 465.
    Link to relevant Google help page can be found here -
    https://mail.google.com/support/bin/static.py?page=troubleshooter.cs&problem=bug flow&selected=bugflow_imap07
    Hope this helps some of you.

  • Down payment not cleared with invoice trans f-54

    Hi All,
    I need help with down payment clearing with invoice. Purpose is to have open residual item for not paid invoice part.
    I made such steps:
    1. Vendor down payment request, trans F-47, (for instance) 90Eur
    2. Make down payment, trans F110, 90Eur
    3. Vendor invoice receipt, trans. FB60, 115Eur
    4. Clear down payment, trans. F-54.
    The problem is that clearing document is created, but actually down payment for 90Eur and invoice for 115Eur are not cleared, and residual item for 25Eur is not created. Using payment program (F110) again system suggest to pay whole invoice sum - 115Eur - that is quite dangerous.
    I will be very thankful for your help.

    Hi,
    Have you cleared down payment against the invoice no. in F-54 ?
    If you do so, there will be a link between  the invoice & down payment document no. During F110, system will select both the documents together.
    Also check in T code FB00 (Editing options) under "Open Items" tab, whether "include invoice reference" check box is selected.
    If not, then select this check box & try the transaction once again.
    Hope this helps you.
    Regards,
    Ashutosh

Maybe you are looking for