Outgoing server not working now

i have a mbp and g5 desktop. both mail programs are setup the same. my mbp mail's outgoing server is not connecting or working all of a sudden....worked yesterday fine. my g5 is working fine. my mbp is wireless....my g5 is hardwired into the modem. any thoughts?
i havent moved im in my house it worked fine yesterday and the past year. anythoughts?

What does “is not connecting or working” mean? What’s the problem exactly?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Try also turning OFF all the network port configurations except the one needed to connect to Internet and see whether that makes a difference — if it doesn’t, turn ON again the ones you want enabled.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc.

Similar Messages

  • Outlook 2007 - hotmail not not populating in outlook - incoming/outgoing server not working

    Hi - I am switching computers and have reinstalled Outlook 2007.  When I add my account  it asks for incoming/outgoing mail server information from my ISP.   I am unable to look on previous laptop set up as the "repair"
    portion of account is not highlighted and I can't get to that level to see it. I contacted my ISP (Comcast) who provided: Incoming Server: mail.comcast.net and Outgoing Server: smtp.comcast.net.  They also provided incoming mail server: port
    number 995 (POP3) 110 (POP3); and outgoing mail server: 465(SMTP) 587(SMTP).   This is not working.     Who has a solution?
    P.S. Comcast is my new provider as of 3 weeks ago and no issues with old laptop--also that would not have been my incoming/outgoing server information then.  thank you

    Hi,
    Apple have instructions here on how to setup MobileMe:
    http://www.apple.com/mobileme/setup/mac/
    There should be a checkbox to 'automatically configure' according to the article.

  • Why is my outgoing server not working?

    I have my laptop apple mail set up with a few accounts. Im able to get incoming mail but i cant send emails. It says the server is not working.
    What can i do to fix this issue?

    Hello anmlsrmnml,
    Fortunately, Mail has a built-in tool called "Connection Doctor" that can give you further information about Mail's inability to send messages. This can be accessed from the Window menu -> Connection Doctor.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    Allen

  • TS3276 hotmail smtp outgoing server not working

    I have been unable to send emails from my Mail account as it continues to say SMTP server is offline.  Has only been happening in the last 2 weeks.  Any advice???

    It sounds like your Outgoing Mail Server (SMTP) is not set up correctly.  I would suggest ypu open Mail>Preferences>Accounts>go down to the line on the lower right of the window that says "Outgoing Mail Server (SMTP)>click on the drop down arrows at the right end of that line, and click on the "Edit SMTP Server List..."> in the following two available windows make sure all the settings are correct as to Port, Password, Server Name, etc. as stated by your ISP.

  • Yahoo outgoing mail server not working.

    My yahoo outgoing server not working on iPod touch or iPad it says apple.smtp.yahoo failed...incoming is ok so far...this outgoing mail failure just started about a couple of days back....anyone else having this problem?????what should I do?rediffmail account does not get set up either so just unable to use any of my emails. :(

    Hello, and welcome to the Discussions.
    I get 100% success pinging mail.adelphia.net, and if at your home venue where Adelphia is your ISP, then I think no separate Authentication is required. Port 25 would be the proper port. However, if you are not at home, and the provider of internet connection limits you to using only authenticated SMTP then you would not able to use mail.adelphia.net as the Outgoing Server.
    Are you at the venue where Adelphia is the ISP?
    Ernie

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • Outgoing Mail Not Working in Yosemite

    My outgoing mail server SMTP does not work now that I have updated my OS to Yosemite. I have checked all passwords and setting to be the same as they were in Maverick but no luck. I have tried to delete my mail account and start over but still no luck.

    Here is a screen shot of the connection Doctor. Incoming emails work.

  • Can't get Godaddy outgoing server to work in Mail - OK in Outlook

    No matter what I try, I just cannot get the Godaddy outgoing server to work in Mail, but it works OK in Outlook for Mac which I don't really want to use if I can avoid it.
    I've tried all my 3 accounts and none of them work with sending.  All Ok receiving.
    Tried smtpout.secureserver.net with and without SSL, and with all sorts of ports 80, 3535, etc.
    Nothing works.
    Can anyone suggest any solution or more in depth troubleshooting methods.  I feel it's some security issue which Outlook seems to have more settings for.
    Thanks.

    Eric Root wrote:
    Copy the line below.
    ~/Library/Containers/com.apple.mail
    While holding down the option key, select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
    Just for clarification for the OP these are two different approaches to get to the same file.
    1.)While holding down the option key, >>Shows the hidden  users Library (~/Library.)
    or
    2.) select Finder>Go>Go To Folder from the Finder menu bar. Paste the line into the window
    ~/Library/Containers/com.apple.mail
    Using the Go to Folder option will take you directly to the file itself in your user Library (~/Library,) no option key necessary.
    Eric Root wrote:
    Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    AND if you are recommending moving the entire folder you are better off going to the /Container:
    ~/Library/Containers/

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

    Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

    Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
    Good luck.

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • HT204230 this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up  how i can fix it please help me  iPhone 5s, iOS 8.3

    this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up  how i can fix it
    please help me
    iPhone 5s, iOS 8.3

    Create a new AppleID on a different iOS device or on a computer. You will
    then be able to use that newly created AppleID on your iPhone.

  • How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

    How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

    How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

  • Force encryption on SQL Server not working?

    Hello Everyone,
    I'm running SQL Server 2008 64-bit. I've installed a self-signed cert on the box and set  "Force Encryption"  and restarted SQL server. 
    I setup a client machine to trust the authority of the cert installed on the server. When I connect to that SQL server from SSMS from a client machine and select the "encrypt connection" option in the client Connection properties, SSMS correctly complains
    that the cert on the server does not match the computer name I asked to log into . This is because, although the cert is trusted, the dns name dos not match the CN in the cert <- Perfect, exactly what I am expecting.
    When I connect to the same SQL server from the same client but  UNCHECK "encrypt connection" on the client, I'm able to login. Considering I've checked the "Force Encryption" on the server, the server should have rejected the connection. Why not?
    Ameer Deen

    Hi all,
    We are implementing a Merge Synchronization solution which involves three SQL Servers located on three Azure locations worldwide and one on-premises location. We need to secure communications between all servers. We are evaluating the encryption of all server
    communications through SSL:
    http://technet.microsoft.com/en-us/library/ms191192.aspx
    When we configure one server (let’s call it server A) to accept only encrypted connections (with Force Encryption=Yes) we still can connect from other server (let’s call it server B) that do not have the certificate installed. We would expect the server
    B to fail in the attempt of connect as server A should only accept encrypted communications and those should need the certificated to encrypt/decrypt everything (commands and data).
    We have also review the following forum post that is very similar to this one:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working
    In all cases the Microsoft answer is:
    “When the
    Force Encryption option for the Database Engine is set to YES, all communications between client and server is encrypted no matter whether the “Encrypt
    connection” option (such as from SSMS) is checked or not. You can check it using the following DMV statement”
    When we run the provided DMV statement to check if encryption is enabled:
    -- To check whether connections are encrypted between server and clients
    SELECT encrypt_option
    FROM sys.dm_exec_connections
    We get “TRUE”. So theoretically encryption is enabled.
    Then:
    Why can we run SQL statements against server A from server B (with SSMS) without any certificate?
    Are we wrong when we expect server A to refuse any client that do not have the right certificate?
    How can server B, without any certificate, decrypt the data encrypted by server A?
    Our intention is to encrypt all server in the same way so all of them will accept only encrypted communications. We are assuming that the Merge Agent will be able to communicate with the Publisher and the Subscriber through this encrypted environment. May
    anyone please confirm ti?
    Thanks for your help.
    Best Regards
    Benjamin Moles

Maybe you are looking for

  • Links not working in Spry Accordian Menu

    When clicked the links in the left side accordian menu do not work. However, the child-links work great. Example: http://www.richartbuilders.com/remodel.php HEAD TAGS: <script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script> <script

  • Importing photos from iPhone to iPhoto on my MacBook Pro very slow

    It's taking the best part of thirty minutes to import the photos from my iPhone 5 (iOS 6.1.4) into iPhoto (version 9.4.3) using my MacBook Pro (10.8.2). I've tried rebuilding the iPhoto databse which didn't have any positive effect to the process. I'

  • How to add a photo to Apple Mail signature...? (he asks laughably)

    Since the sender's Address Book photo is not included with emails sent (even 'though Apple Mail makes it look like they are), how can you add a personal photo to a Mail signature? OR, is there another means of including a personal photo with every em

  • Out of Memory message -- even with a blank sequence!

    Not sure what happened, but all of a sudden I can't get any timelines to open. Even if I just start up the program without any open sequences, when I click on the empty "Sequence 1" I get the dreaded Error: Out of Memory message. I've tried the usual

  • To extract data

    hi, i want to extract required strings from a set of string, dont know how to achieve this task? Given string CNR ELIZABETH & LONSDALE STS 36 NEW QUAY PROMENADE 263 MAIN RD WEST 5 LIVER POOL RD WEST Required output: LONSDALE QUAY RD RD Best Regards,