Outline an object with a dash line in PS CS6

I have a silhouetted figure I'd like to outline with a dash line ... I understand the basic concept, but will I have to manually outline the object ... can't seem to get it to work out ... what alternative do I have?

I have a silhouetted figure I'd like to outline with a dash line ... Will I have to manually outline the object ... what alternative do I have?

Similar Messages

How do I outline an object with a dash line in Photoshop CS6?

How do I outline an object (silhouette figure) with a dash line in Photoshop CS6? ... never was this difficult.

I have a silhouetted figure I'd like to outline with a dash line ... Will I have to manually outline the object ... what alternative do I have?

Since iOS 6, my calendar app shows many events as gray with a dashed line around them. dont mind the lines, but i want my color coding back so i can distinguish between multiple calendars.

How can I make my ipad show the designated calendar color for events? Have tried using ms exchange and gmail...they look identical. It seems to happen to items I add from my computer or android phone, but not events added from ipad.

Somehow my settings and calendars have gown complicated...I have Microsoft Exchange, Google, AND gmail. What ended up working was switching all of them off, shutting down my ipad, restarting my ipad, and then choosing one of them to switch back on. Now all the colors are correct. Thank you, emdak.

Creating Objects with the Shape Tools | Learn Illustrator CS6 | Adobe TV

In this video you'll see how to use Illustrator's shape tools to create primitive shapes that you can use as the basis for objects. You'll also learn how to use the Shape Builder tool to combine shapes.
http://adobe.ly/JXWnRj

What tool did you use to drag between the skull and jaw to join them? You didn't share how you did that.

HI,Can the smartforms output the windows box as the type of dashed Line?

My customer let me Print the windows box with the dashed line in smartforms, but i searched many method ,all failed,anybody know how to do it?

hi,Bala Muthu Raja
thanks for your information.
but i means i want to output the dashed line box for the windows as following......
^^^^windows^^^^
^^^^windows^^^^
^^^^windows^^^^
^^^^windows^^^^
^^^^windows^^^^
adjusting the line width just make the box line become wild or thin.
Message was edited by: shi jack
Message was edited by: shi jack

Disappeared dashed lines options

very often when I want to adjust the spacing for the dashed lines in Indesign cs6, the options disappear in the stroke flyout panel.
Strangely, it remains disappeared for the specified file forever. The workaround that I do for this is that I open a new file, make the dashed lines as desired, (yeah, the options come in a new file), then copy paste it. What exactly is causing this weird behaviour?

arjun2 wrote:
Here's my screenshot with everything selected. I have yet to trash my preferences. currently learning to backup my shortcuts . Does this problem occur in the latest version of indesign which is CC?
I'm always beware of new versions, often they are heavier and take longer time to process, e.g. photoshop cs6 i found slower than cs5
You haven't select the Dashed Line at the bottom of the Type options.
You have 2 different stroke weights selected, that's why weight shows as nothing.
Bold part: That's just not true for everyone, in fact I find each version of all the Adobe suites to run perfectly fine - there may be something you need to change on your system to get the programs to work better. But I never notice any difference from version to version regarding longer times to process.

My dashed line is rendering with a box outline. How can I fix this?

Hi,
I am trying to create a dashed line with the simple line widget - however a box is actually appearing in the final page (in addition to the dashed line), as below:
How can I adjust it so only the dashed line appears? I can't see any options for it.
Many thanks,
Jeremy

Check that the widget itself hasn't got a stroke applied to it.
Can I also recommend you have a look at my latest widget, which gives you full control over frame borders.
Better Frame Borders Widget For Adobe Muse | Creative Muse
David

Problem with dashed line spacing when printing to pdf

Hi all,
this may be a problem with my pdf program (I use bluebeam), but maybe someone will have an idea how to fix it whether in indesign or bluebeam.
so I made a dashed line using the stroke command in indesign. I need to have the spacing set to 3pt dash and 2pt space. I also need to keep the lineweight to 0.5...this all works fine and appears correctly in indesign when I preview
the problem is that some of the dashed lines, but not all of them, change size and spacing in the pdf when I view it. it seems to change when I zoom in and out as well. I thought maybe this was just some odd feature with bluebeam and it would still print to the correct size, but it does not, it prints the lines as different sizes. does anyone have an idea why this happens and how to fix? ive viewed and printed from adobe reader and it seems to be okay there but this file will be accessed by multiple other people and they may not be opening and printing in adobe reader..
thanks guys

When you export a PDF you will notice that you are exporting to Adobe PDF. Using any reader beyond Acrobat Pro or Reader is a crapshoot.
For issues with Bluebeam I suggest you contact the developer.

Can Flash create dashed line with blunt not rounded dashes ?

Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
Envirographics

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

Dashed line with jdk1.1.8?

Hello
Does anyone know how to make dashed lines with jdk 1.1.8? Yes, that means no Graphics 2D nor BasicStoroke class.
Also how do you make the line wider with 1.1.8?
I appreciate any response. Thanks
michiko

int lineLength = 100;
for(int i = 0; i < lineLength ; i = i + 6){
g.drawLine(i,i,i+3,i+3);
how about that?

Please put a cost object with valid JV data for GL accoutnt (line 001)

Dear All,
When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
Can someone help please and let us know if we are missing anything else that needs to be checked ?
Thanks,
Hari Dharen

Dear Hari Dharen,
if something else in missung you'll get a error message if you run ASKBN in testmodus.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

[4712] WARNING!!! 'Huh, you set a test object to itself... whats up with dat?' Line 601 in function in file .\tstobj2\ObjArray.cpp

I'm using TestStand 4.0 and anytime I try to intialize my chasis this message shows up in my debugg viewer. I would appriciate any feedback. I have no idea what could be triggering this message or why it's worded the way it is.
[4712] WARNING!!! 'Huh, you set a test object to itself... whats up with dat?' Line 601 in function in file .\tstobj2\ObjArray.cpp

You've hit what was intended to be an internal development warning, but apparently the warning macro used is not compiled out in the release.
This has likely been there since TestStand 1.0 and is nothing to worry about. In most cases it indicates you've called SetPropertyObject or SetPropertyObjectByOffset to set an object that was already set in the specified location. This is a harmless NOP and the warning only appears in attached debuggers, but it "might" be an indication that you have made a programming error.
I launched and exited the 4.0 sequence editor without seeing this warning, so I don't know if it is being triggered by your code module (or sequence, or custom step type, or custom UI, or custom process model, ...) or another part of TestStand that you are using. Chances are good that this warning does not indicate a functional problem. However, if you can reproduce it with a clean uncustomized TestStand install, I'd like to know how you did it.
I've entered a corrective action request to remove this warning.
Message Edited by James Grey on 09-13-2007 10:12 AM

SRM Outline PO line not unique with ECC PO line

Hi Experts,
We are using SRM 7.01 Extended Classic scenario. We have requirement in BI reporting for Shopping Cart and Purchase Order Overview Report.
There is 1 issue with Outline PO(PO created from external Requirement) in SRM. In SRM, it is created as Hierarchy line item(Parent- Child relationship).
For Ex. we have 1 PO with 2 lines in SRM as Outline PO with Hierarchy relationship means there are 2 lines as Outline and 2 lines as limit in SRM with line numbers as 1,2,3,5. When this PO is replicated in ECC, as only limit items gets replicated into ECC and not outline items but with numbering 1 and 3. Now my question here is why these line numbers are not at all matching in ECC. In SRM, it is 2 and 5 and In ECC, it is 1 and 3. This mismatch of line numbers is causing issue for report viewing to users as they verify same in SRM and ECC PO.
Is there any correction available or can be applied to have unique PO line numbers for Outline PO in SRM and ECC ?
I will be very thankful if prompt response is given here.
Thanking you..
Best Regards,
Kunal Sanghavi

hi
Check it out in material master, for the parrticular material inventory may be blocked either in basic data1 view or in purchasing view.. Check it out the x-plant block tab..
Reward if useful,
Yuvi.

Dashed line with more dashes: intermittent stream

The standard symbol for a stream on topographic maps is a blue line.
The standard symbol for an intermittent stream on topographic maps is a a blue line, with long segments interrupted regularly with a series of three dots. I can create a dashed line interrupted by two dots, but there aren't enough boxes for me to specify the third dot.
Any suggestions on the best way to accomplish this?
Thanks.

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

Can I set a destination object with command line

I have installed sun java system message queue 3.5 with sp1. Course of I can not run admin console, I want to know if I can set destination object with command.
Thanks

all admin console functions are supported through the
command line administration tools
To change attributes on a destination administered
object, use imqobjmgr
http://docs.sun.com/source/817-3727/adminobj.html#wp14381
To create and administer physical destinations on the broker
use imqcmd
http://docs.sun.com/source/817-3727/brkrmgmt.html#wp19759

Outline an object with a dash line in PS CS6

Similar Messages

Maybe you are looking for